Discoverer Desktop crash

When trying to open a report created by a colleague, Discoverer immediately throws a Windows (Vista 32Bit) error that "Oracle Discoverer Desktop has stopped working". I click close program, and Discoverer closes. It's a very simple report so I recreated it yesterday, ran it fine, could change parameters for different outputs, no problems. This morning I log in and when trying to open the newly created report from yesterday, same error. No exception, no memory pointers, nothing, just the Win error that it has stopped working.
Anyone seen this before? Running Discoverer Desktop v 10.1.2.3 Client v 10.1.2.55.26.

My colleague was able to open and modify the report that I created without issue so I suspect the report is alright, perhaps my installation? Odd that I can run many other reports just fine in the same environment and that this one ran fine from development, but as soon as I closed it to reopen, no luck.

Similar Messages

  • Discoverer Plus crashes when saving large workbook.

    Hi all,
    We have a strange problem with a large 40 sheet workbook
    We can open and save the report back to the database in Discoverer Desktop 10 ok.
    However, there are problem in Discoverer Plus. I can open the report ok but when attempting to save it the browser seems to stall and after an amount of time an error appears saying 'Contact with the Discoverer Server has been lost. To continue your work please restart Discoverer Plus etc etc'
    Any ideas?
    rg

    After how much time the system is crashing?
    check in discoverer plus in Tools->Option->Query Governor setting of 'Prevent queries from running longer than', try increasing this value.
    Thanks.

  • Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

    As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
    Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
    Regards,
    Brajesh

    Pretty hard to answer a question like this.  Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out. 

  • Need help debugging desktop crashes

    Hi all,
    I've started having trouble with random desktop crashes. It only happens occasionally (twice in the past couple of weeks), but my screens black out (no signal). The desktop is still powered on, but I can't ssh to it. I'm pretty sure I wasn't doing anything specific either time to cause the crash.
    Unfortunately, I don't have much more information (sorry!). I've been told on the IRC to look at dmesg, the output of which I've pasted below, but I can't really make head nor tail of it.
    Ask me and I'll post any other logs/command output that might help.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.15.8-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Fri Aug 1 08:51:42 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8fc8d7e8-be76-4428-a102-f74fbb580922 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c8fcefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c8fcf000-0x00000000c95d1fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c95d2000-0x00000000c9825fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c9826000-0x00000000c9832fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c9833000-0x00000000c9851fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c9852000-0x00000000c9856fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c9857000-0x00000000c9899fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c989a000-0x00000000c9ca9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c9caa000-0x00000000c9ff3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: System manufacturer System Product Name/P8H77-V, BIOS 0324 02/15/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FE0000000 write-back
    [ 0.000000] 2 base 220000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable
    [ 0.000000] 7 base 22FE00000 mask FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fccf0-0x000fccff] mapped at [ffff8800000fccf0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
    [ 0.000000] [mem 0x22fc00000-0x22fdfffff] page 2M
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
    [ 0.000000] [mem 0x22c000000-0x22fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc8fcefff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc8dfffff] page 2M
    [ 0.000000] [mem 0xc8e00000-0xc8fcefff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc989a000-0xc9ca9fff]
    [ 0.000000] [mem 0xc989a000-0xc99fffff] page 4k
    [ 0.000000] [mem 0xc9a00000-0xc9bfffff] page 2M
    [ 0.000000] [mem 0xc9c00000-0xc9ca9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc9ff4000-0xc9ffffff]
    [ 0.000000] [mem 0xc9ff4000-0xc9ffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x37772000-0x37bb0fff]
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000C9826078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000C98308E0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000C9826170 00A76A (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000C9850F80 000040
    [ 0.000000] ACPI: APIC 0x00000000C98309D8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 0x00000000C9830A50 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000C9830A90 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000C9830AC8 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000C9830F28 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 0x00000000C98318D8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 0x00000000C9832370 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: BGRT 0x00000000C9832428 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
    [ 0.000000] NODE_DATA [mem 0x22fdf1000-0x22fdf5fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc8fcefff]
    [ 0.000000] node 0: [mem 0xc989a000-0xc9ca9fff]
    [ 0.000000] node 0: [mem 0xc9ff4000-0xc9ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22fdfffff]
    [ 0.000000] On node 0 totalpages: 2068359
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12808 pages used for memmap
    [ 0.000000] DMA32 zone: 819690 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19448 pages used for memmap
    [ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8fcf000-0xc95d1fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc95d2000-0xc9825fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc9826000-0xc9832fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc9833000-0xc9851fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc9852000-0xc9856fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc9857000-0xc9899fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc9caa000-0xc9ff3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s87168 r8192 d23424 u524288
    [ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036018
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8fc8d7e8-be76-4428-a102-f74fbb580922 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8059568K/8273436K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 213868K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3398.854 MHz processor
    [ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.94 BogoMIPS (lpj=11329513)
    [ 0.000028] pid_max: default: 32768 minimum: 301
    [ 0.000032] ACPI: Core revision 20140214
    [ 0.004609] ACPI: All ACPI Tables successfully acquired
    [ 0.006765] Security Framework initialized
    [ 0.006770] Yama: becoming mindful.
    [ 0.007110] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.008539] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009174] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.009181] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.009321] Initializing cgroup subsys memory
    [ 0.009324] Initializing cgroup subsys devices
    [ 0.009326] Initializing cgroup subsys freezer
    [ 0.009327] Initializing cgroup subsys net_cls
    [ 0.009328] Initializing cgroup subsys blkio
    [ 0.009342] CPU: Physical Processor ID: 0
    [ 0.009343] CPU: Processor Core ID: 0
    [ 0.009346] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.009609] mce: CPU supports 9 MCE banks
    [ 0.009618] CPU0: Thermal monitoring enabled (TM1)
    [ 0.009626] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.009699] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
    [ 0.010378] ftrace: allocating 20229 entries in 80 pages
    [ 0.017451] dmar: Host address width 36
    [ 0.017453] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.017459] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.017460] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.017464] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.017464] dmar: RMRR base: 0x000000c9549000 end: 0x000000c9565fff
    [ 0.017465] dmar: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
    [ 0.017533] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.017533] HPET id 0 under DRHD base 0xfed91000
    [ 0.017534] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.017639] Enabled IRQ remapping in x2apic mode
    [ 0.017640] Enabling x2apic
    [ 0.017640] Enabled x2apic
    [ 0.017644] Switched APIC routing to cluster x2apic.
    [ 0.018045] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.051017] smpboot: CPU0: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.051022] TSC deadline timer enabled
    [ 0.051028] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.051033] ... version: 3
    [ 0.051033] ... bit width: 48
    [ 0.051034] ... generic registers: 8
    [ 0.051035] ... value mask: 0000ffffffffffff
    [ 0.051035] ... max period: 0000ffffffffffff
    [ 0.051036] ... fixed-purpose events: 3
    [ 0.051036] ... event mask: 00000007000000ff
    [ 0.074413] x86: Booting SMP configuration:
    [ 0.074416] .... node #0, CPUs: #1
    [ 0.087877] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.094547] #2 #3
    [ 0.128105] x86: Booted up 1 node, 4 CPUs
    [ 0.128108] smpboot: Total of 4 processors activated (27201.78 BogoMIPS)
    [ 0.130404] devtmpfs: initialized
    [ 0.132695] PM: Registering ACPI NVS region [mem 0xc95d2000-0xc9825fff] (2441216 bytes)
    [ 0.132717] PM: Registering ACPI NVS region [mem 0xc9833000-0xc9851fff] (126976 bytes)
    [ 0.132719] PM: Registering ACPI NVS region [mem 0xc9857000-0xc9899fff] (274432 bytes)
    [ 0.133240] pinctrl core: initialized pinctrl subsystem
    [ 0.133269] RTC time: 14:04:30, date: 08/05/14
    [ 0.133295] NET: Registered protocol family 16
    [ 0.133354] cpuidle: using governor ladder
    [ 0.133354] cpuidle: using governor menu
    [ 0.133363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.133364] ACPI: bus type PCI registered
    [ 0.133365] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.133402] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.133404] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.133461] PCI: Using configuration type 1 for base access
    [ 0.134021] ACPI: Added _OSI(Module Device)
    [ 0.134022] ACPI: Added _OSI(Processor Device)
    [ 0.134023] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.134024] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.135968] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.148373] ACPI: SSDT 0x00000000C9583018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.148602] ACPI: Dynamic OEM Table Load:
    [ 0.148603] ACPI: SSDT 0x0000000000000000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.158263] ACPI: SSDT 0x00000000C9584A98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.158527] ACPI: Dynamic OEM Table Load:
    [ 0.158528] ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.168175] ACPI: SSDT 0x00000000C9582D98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.168404] ACPI: Dynamic OEM Table Load:
    [ 0.168405] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.178489] ACPI: Interpreter enabled
    [ 0.178496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
    [ 0.178504] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.178505] ACPI: Using IOAPIC for interrupt routing
    [ 0.178521] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.182207] ACPI: Power Resource [FN00] (off)
    [ 0.182256] ACPI: Power Resource [FN01] (off)
    [ 0.182304] ACPI: Power Resource [FN02] (off)
    [ 0.182352] ACPI: Power Resource [FN03] (off)
    [ 0.182399] ACPI: Power Resource [FN04] (off)
    [ 0.182776] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.182779] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.182857] \_SB_.PCI0:_OSC invalid UUID
    [ 0.182858] _OSC request data:1 1f 0
    [ 0.182860] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.183226] PCI host bridge to bus 0000:00
    [ 0.183228] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.183229] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.183230] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.183232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.183233] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.183234] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.183235] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.183236] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.183237] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.183238] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.183239] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
    [ 0.183244] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
    [ 0.183301] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.183326] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.183349] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.183377] pci 0000:00:02.0: [8086:0152] type 00 class 0x038000
    [ 0.183384] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 0.183389] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.183392] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.183462] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.183481] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
    [ 0.183546] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.183572] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.183601] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.183621] pci 0000:00:16.0: reg 0x10: [mem 0xf7e19000-0xf7e1900f 64bit]
    [ 0.183689] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.183750] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.183768] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
    [ 0.183850] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.183888] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.183917] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.183930] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
    [ 0.183996] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.184024] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.184050] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.184123] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.184153] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.184182] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
    [ 0.184254] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.184285] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.184311] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
    [ 0.184383] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.184414] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.184445] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.184463] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e16000-0xf7e163ff]
    [ 0.184545] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.184580] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.184609] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
    [ 0.184751] pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
    [ 0.184764] pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
    [ 0.184770] pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
    [ 0.184776] pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
    [ 0.184783] pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
    [ 0.184789] pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
    [ 0.184795] pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
    [ 0.184863] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.184876] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
    [ 0.184895] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.184952] pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
    [ 0.184965] pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.184971] pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.184977] pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
    [ 0.184983] pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
    [ 0.184990] pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
    [ 0.184996] pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
    [ 0.185091] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
    [ 0.185098] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.185103] pci 0000:01:00.0: reg 0x18: [mem 0xf7d00000-0xf7d3ffff 64bit]
    [ 0.185107] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.185114] pci 0000:01:00.0: reg 0x30: [mem 0xf7d40000-0xf7d5ffff pref]
    [ 0.185135] pci 0000:01:00.0: supports D1 D2
    [ 0.185136] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
    [ 0.185168] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
    [ 0.185175] pci 0000:01:00.1: reg 0x10: [mem 0xf7d60000-0xf7d63fff 64bit]
    [ 0.185208] pci 0000:01:00.1: supports D1 D2
    [ 0.191417] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.191421] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.191424] pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 0.191429] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.191505] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.191582] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
    [ 0.191608] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit]
    [ 0.191621] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.191754] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.191784] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.198088] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.198092] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.198097] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.198192] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
    [ 0.198307] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.198328] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
    [ 0.198337] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.198338] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.198339] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.198340] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.198341] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.198342] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.198344] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.198345] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.198346] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.198347] pci 0000:00:1c.5: bridge window [mem 0xcf200000-0xfeafffff] (subtractive decode)
    [ 0.198457] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
    [ 0.198477] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.198478] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.198479] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.198480] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.198481] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.198482] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.198483] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.198484] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.198486] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.198487] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.198488] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.198489] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.198490] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.198491] pci 0000:04:00.0: bridge window [mem 0xcf200000-0xfeafffff] (subtractive decode)
    [ 0.198687] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.198720] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.198751] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.198781] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.198813] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.198844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.198875] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.198905] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.198977] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.199032] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.199034] vgaarb: loaded
    [ 0.199034] vgaarb: bridge control possible 0000:01:00.0
    [ 0.199048] PCI: Using ACPI for IRQ routing
    [ 0.200393] PCI: pci_cache_line_size set to 64 bytes
    [ 0.200434] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.200435] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.200436] e820: reserve RAM buffer [mem 0xc8fcf000-0xcbffffff]
    [ 0.200437] e820: reserve RAM buffer [mem 0xc9caa000-0xcbffffff]
    [ 0.200438] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
    [ 0.200439] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
    [ 0.200497] NetLabel: Initializing
    [ 0.200497] NetLabel: domain hash size = 128
    [ 0.200498] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.200505] NetLabel: unlabeled traffic allowed by default
    [ 0.200518] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.200521] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.202536] Switched to clocksource hpet
    [ 0.205461] pnp: PnP ACPI init
    [ 0.205473] ACPI: bus type PNP registered
    [ 0.205530] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.205532] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.205540] pnp 00:01: [dma 4]
    [ 0.205552] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.205566] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.205624] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.205654] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.205655] system 00:04: [io 0x0200-0x020f] has been reserved
    [ 0.205657] system 00:04: [io 0xffff] has been reserved
    [ 0.205658] system 00:04: [io 0xffff] has been reserved
    [ 0.205659] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.205660] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.205662] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.205663] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.205664] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.205687] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.205719] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.205721] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.205773] system 00:07: [io 0x0290-0x029f] has been reserved
    [ 0.205775] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.205807] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.205809] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.205827] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.205968] pnp 00:0a: [dma 0 disabled]
    [ 0.206001] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.206148] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.206149] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.206151] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.206152] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.206153] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.206155] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.206157] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.206158] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.206159] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.206160] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.206162] system 00:0b: [mem 0xcf200000-0xcf200fff] has been reserved
    [ 0.206163] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.206259] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.206260] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.206262] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.206275] pnp: PnP ACPI: found 13 devices
    [ 0.206276] ACPI: bus type PNP unregistered
    [ 0.212140] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.212142] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.212143] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.212170] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.212171] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.212172] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.212176] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf300000-0xcf4fffff]
    [ 0.212181] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf500000-0xcf6fffff 64bit pref]
    [ 0.212182] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.212184] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.212185] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.212187] pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 0.212189] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.212191] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.212193] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.212197] pci 0000:00:1c.0: bridge window [mem 0xcf300000-0xcf4fffff]
    [ 0.212200] pci 0000:00:1c.0: bridge window [mem 0xcf500000-0xcf6fffff 64bit pref]
    [ 0.212205] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.212207] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.212211] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.212217] pci 0000:04:00.0: PCI bridge to [bus 05]
    [ 0.212236] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
    [ 0.212246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.212247] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.212248] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.212249] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.212250] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.212251] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.212252] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.212253] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.212254] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.212255] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
    [ 0.212257] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.212258] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 0.212259] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.212260] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.212261] pci_bus 0000:02: resource 1 [mem 0xcf300000-0xcf4fffff]
    [ 0.212262] pci_bus 0000:02: resource 2 [mem 0xcf500000-0xcf6fffff 64bit pref]
    [ 0.212263] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.212264] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 0.212265] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.212266] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.212267] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.212269] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.212270] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.212271] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.212272] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.212273] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.212274] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.212275] pci_bus 0000:04: resource 13 [mem 0xcf200000-0xfeafffff]
    [ 0.212276] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
    [ 0.212277] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
    [ 0.212278] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
    [ 0.212279] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.212280] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.212281] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.212282] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.212283] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.212285] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.212286] pci_bus 0000:05: resource 17 [mem 0xcf200000-0xfeafffff]
    [ 0.212301] NET: Registered protocol family 2
    [ 0.212405] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.212505] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.212611] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.212623] TCP: reno registered
    [ 0.212629] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.212649] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.212685] NET: Registered protocol family 1
    [ 0.245935] pci 0000:01:00.0: Boot video device
    [ 0.245938] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.245944] PCI: CLS 64 bytes, default 64
    [ 0.245971] Unpacking initramfs...
    [ 0.297147] Freeing initrd memory: 4348K (ffff880037772000 - ffff880037bb1000)
    [ 0.297165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.297166] software IO TLB [mem 0xc4fcf000-0xc8fcf000] (64MB) mapped at [ffff8800c4fcf000-ffff8800c8fcefff]
    [ 0.297279] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.297305] Scanning for low memory corruption every 60 seconds
    [ 0.297474] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.307365] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.308202] zbud: loaded
    [ 0.308310] VFS: Disk quotas dquot_6.5.2
    [ 0.308329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.308394] msgmni has been set to 15749
    [ 0.308421] Key type big_key registered
    [ 0.308524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.308559] io scheduler noop registered
    [ 0.308561] io scheduler deadline registered
    [ 0.308589] io scheduler cfq registered (default)
    [ 0.308711] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 0.308910] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.308920] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.308938] vesafb: mode is 1366x768x32, linelength=5632, pages=0
    [ 0.308939] vesafb: scrolling: redraw
    [ 0.308940] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.308951] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 4224k, total 4224k
    [ 0.350451] Console: switching to colour frame buffer device 170x48
    [ 0.391803] fb0: VESA VGA frame buffer device
    [ 0.391811] intel_idle: MWAIT substates: 0x1120
    [ 0.391812] intel_idle: v0.4 model 0x3A
    [ 0.391812] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.391916] GHES: HEST is not enabled!
    [ 0.391950] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.412492] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.412763] Linux agpgart interface v0.103
    [ 0.412791] rtc_cmos 00:05: RTC can wake from S4
    [ 0.412895] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.412921] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.412927] Intel P-state driver initializing.
    [ 0.412937] Intel pstate controlling: cpu 0
    [ 0.412950] Intel pstate controlling: cpu 1
    [ 0.412959] Intel pstate controlling: cpu 2
    [ 0.412996] Intel pstate controlling: cpu 3
    [ 0.413032] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.413152] TCP: cubic registered
    [ 0.413269] NET: Registered protocol family 10
    [ 0.413508] NET: Registered protocol family 17
    [ 0.413917] registered taskstats version 1
    [ 0.414415] Magic number: 10:384:80
    [ 0.414512] rtc_cmos 00:05: setting system clock to 2014-08-05 14:04:30 UTC (1407247470)
    [ 0.414604] PM: Hibernation image not present or could not be loaded.
    [ 0.415570] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
    [ 0.415572] Write protecting the kernel read-only data: 8192k
    [ 0.418429] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
    [ 0.419683] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
    [ 0.425699] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.426625] systemd-udevd[58]: starting version 215
    [ 0.434065] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.436383] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.436406] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.438395] ACPI: bus type USB registered
    [ 0.438416] usbcore: registered new interface driver usbfs
    [ 0.438422] usbcore: registered new interface driver hub
    [ 0.438568] usbcore: registered new device driver usb
    [ 0.438769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.438940] ehci-pci: EHCI PCI platform driver
    [ 0.439051] SCSI subsystem initialized
    [ 0.439069] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.439073] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.439084] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.439951] libata version 3.00 loaded.
    [ 0.442968] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.442981] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7e17000
    [ 0.452336] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.452456] hub 1-0:1.0: USB hub found
    [ 0.452461] hub 1-0:1.0: 2 ports detected
    [ 0.452625] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.452629] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.452639] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.456535] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.456538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e16000
    [ 0.465651] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.465817] hub 2-0:1.0: USB hub found
    [ 0.465823] hub 2-0:1.0: 2 ports detected
    [ 0.466005] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.466009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.466085] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.466103] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 0.466251] hub 3-0:1.0: USB hub found
    [ 0.466259] hub 3-0:1.0: 4 ports detected
    [ 0.466483] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.466485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.466628] hub 4-0:1.0: USB hub found
    [ 0.466637] hub 4-0:1.0: 4 ports detected
    [ 0.466870] ata_piix 0000:00:1f.2: version 2.13
    [ 0.466965] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.619604] scsi0 : ata_piix
    [ 0.619931] scsi1 : ata_piix
    [ 0.620018] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
    [ 0.620024] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
    [ 0.620137] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.758810] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.772097] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
    [ 0.772607] scsi2 : ata_piix
    [ 0.772883] scsi3 : ata_piix
    [ 0.772956] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
    [ 0.772959] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
    [ 0.882597] hub 1-1:1.0: USB hub found
    [ 0.882674] hub 1-1:1.0: 6 ports detected
    [ 0.988607] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.112512] hub 2-1:1.0: USB hub found
    [ 1.112572] hub 2-1:1.0: 8 ports detected
    [ 1.298309] tsc: Refined TSC clocksource calibration: 3398.999 MHz
    [ 1.378364] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
    [ 1.408258] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
    [ 1.408273] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
    [ 1.421849] ata1.00: ATA-9: OCZ-AGILITY4, 1.4.1.3, max UDMA/133
    [ 1.421853] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.421859] ata1.01: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
    [ 1.428508] ata1.00: configured for UDMA/133
    [ 1.441760] ata1.01: configured for UDMA/100
    [ 1.442679] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY4 1.4. PQ: 0 ANSI: 5
    [ 1.443880] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-5280S 1.01 PQ: 0 ANSI: 5
    [ 1.467612] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.470021] usbcore: registered new interface driver usbhid
    [ 1.470024] usbhid: USB HID core driver
    [ 1.470596] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05B.0001/input/input2
    [ 1.470731] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
    [ 1.531632] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
    [ 1.623566] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:413C:2106.0002/input/input3
    [ 1.623692] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.6/input0
    [ 1.967693] ata2.01: failed to resume link (SControl 30)
    [ 2.120931] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
    [ 2.120945] ata2.01: SATA link down (SStatus 4 SControl 30)
    [ 2.128110] ata2.00: ATA-8: ST1500DL003-9VT16L, CC4A, max UDMA/133
    [ 2.128114] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.141440] ata2.00: configured for UDMA/133
    [ 2.141636] scsi 1:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC4A PQ: 0 ANSI: 5
    [ 2.153040] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.153044] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.153124] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.153280] sr 0:0:1:0: Attached scsi CD-ROM sr0
    [ 2.153296] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.153301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.153326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.153429] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
    [ 2.153432] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.153528] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.153531] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.153639] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.175762] sda: sda1 sda2
    [ 2.190742] sdb: sdb1
    [ 2.191322] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.191353] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.297544] Switched to clocksource tsc
    [ 2.521461] device-mapper: uevent: version 1.0.3
    [ 2.521594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 3.194646] random: nonblocking pool is initialized
    [ 3.442872] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.687624] systemd[1]: Configuration file /etc/systemd/system/netctl@ethernet\x2ddhcp.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
    [ 3.691036] systemd[1]: [/etc/systemd/system/vncserver@:1.service:1] Assignment outside of section. Ignoring.
    [ 3.786773] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
    [ 3.846387] systemd-udevd[195]: starting version 215
    [ 3.955208] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 3.955211] ACPI: Power Button [PWRB]
    [ 3.955251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.955252] ACPI: Power Button [PWRF]
    [ 3.971958] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 3.972032] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 3.972035] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
    [ 3.972053] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [ 3.982591] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 3.982615] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 3.982636] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 3.982656] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 3.982676] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 3.982697] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 3.983309] wmi: Mapper loaded
    [ 3.983960] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
    [ 4.016049] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
    [ 4.016054] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.016101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 4.022693] [drm] Initialized drm 1.1.0 20060810
    [ 4.032772] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.032996] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.032998] ACPI: Thermal Zone [TZ00] (28 C)
    [ 4.033145] acpi device:46: registered as cooling_device4
    [ 4.033214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
    [ 4.033243] thermal LNXTHERM:01: registered as thermal_zone1
    [ 4.033245] ACPI: Thermal Zone [TZ01] (30 C)
    [ 4.033309] ACPI: Fan [FAN0] (off)
    [ 4.033333] ACPI: Fan [FAN1] (off)
    [ 4.033354] ACPI: Fan [FAN2] (off)
    [ 4.033375] ACPI: Fan [FAN3] (off)
    [ 4.033398] ACPI: Fan [FAN4] (off)
    [ 4.037199] sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
    [ 4.037202] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 4.037203] sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
    [ 4.037204] sound hdaudioC0D0: mono: mono_out=0x0
    [ 4.037205] sound hdaudioC0D0: dig-out=0x20/0x21
    [ 4.037205] sound hdaudioC0D0: inputs:
    [ 4.037207] sound hdaudioC0D0: Rear Mic=0x1a
    [ 4.037208] sound hdaudioC0D0: Front Mic=0x1e
    [ 4.037209] sound hdaudioC0D0: Line=0x1b
    [ 4.045615] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 4.045640] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 4.045658] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 4.045676] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 4.045694] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 4.045711] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
    [ 4.045728] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
    [ 4.045747] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
    [ 4.045764] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
    [ 4.045781] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
    [ 4.084103] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xa
    [ 4.101114] [drm] Memory usable by graphics device = 2048M
    [ 4.101117] checking generic (e0000000 420000) vs hw (d0000000 10000000)
    [ 4.101753] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xa
    [ 4.101765] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xa
    [ 4.101773] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xa
    [ 4.101803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.117554] input: PC Speaker as /devices/platform/pcspkr/input/input23
    [ 4.119413] mousedev: PS/2 mouse device common for all mice
    [ 4.122449] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 4.122456] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 4.122457] [drm] Driver supports precise vblank timestamp query.
    [ 4.122795] iTCO_vendor_support: vendor-support=0
    [ 4.123419] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 4.123440] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 4.123499] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.132527] [drm] Wrong MCH_SSKPD value: 0x20100406
    [ 4.132529] [drm] This can cause pipe underruns and display issues.
    [ 4.132529] [drm] Please upgrade your BIOS to fix this.
    [ 4.146676] i915 0000:00:02.0: No connectors reported connected with modes
    [ 4.146679] [drm] Cannot find any crtc or sizes - going 1024x768
    [ 4.147000] checking generic (e0000000 420000) vs hw (d0000000 10000000)
    [ 4.147051] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
    [ 4.147052] i915 0000:00:02.0: registered panic notifier
    [ 4.147063] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.153004] AVX version of gcm_enc/dec engaged.
    [ 4.153783] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [c8:60:00:98:ce:45]
    [ 4.163501] asus_wmi: ASUS WMI generic driver loaded
    [ 4.165770] asus_wmi: Initialization: 0x0
    [ 4.165783] asus_wmi: BIOS WMI version: 0.9
    [ 4.165823] asus_wmi: SFUN value: 0x0
    [ 4.166095] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input25
    [ 4.168099] asus_wmi: Backlight controlled by ACPI video driver
    [ 4.170681] kvm: disabled by bios
    [ 4.179593] kvm: disabled by bios
    [ 4.188390] [drm] radeon kernel modesetting enabled.
    [ 4.188423] checking generic (e0000000 420000) vs hw (e0000000 10000000)
    [ 4.188424] fb: switching to radeondrmfb from VESA VGA
    [ 4.188437] Console: switching to colour dummy device 80x25
    [ 4.188600] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1462:0x2710).
    [ 4.188609] [drm] register mmio base: 0xF7D00000
    [ 4.188609] [drm] register mmio size: 262144
    [ 4.188651] ATOM BIOS: 113
    [ 4.188769] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
    [ 4.188770] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
    [ 4.188771] [drm] Detected VRAM RAM=1024M, BAR=256M
    [ 4.188772] [drm] RAM width 128bits DDR
    [ 4.188797] [TTM] Zone kernel: Available graphics memory: 4033182 kiB
    [ 4.188798] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 4.188799] [TTM] Initializing pool allocator
    [ 4.188802] [TTM] Initializing DMA pool allocator
    [ 4.188814] [drm] radeon: 1024M of VRAM memory ready
    [ 4.188815] [drm] radeon: 1024M of GTT memory ready.
    [ 4.188823] [drm] Loading VERDE Microcode
    [ 4.192707] systemd-udevd[202]: renamed network interface eth0 to enp3s0
    [ 4.226833] [drm] radeon/VERDE_mc2.bin: 31500 bytes
    [ 4.228027] [drm] Internal thermal controller with fan control
    [ 4.228070] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e
    [ 4.234178] [drm] radeon: dpm initialized
    [ 4.235973] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 4.236543] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e
    [ 4.236546] [drm] PCIE gen 3 link speeds already enabled
    [ 4.246119] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
    [ 4.246215] radeon 0000:01:00.0: WB enabled
    [ 4.246217] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021f6f1c00
    [ 4.246219] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88021f6f1c04
    [ 4.246220] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88021f6f1c08
    [ 4.246221] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021f6f1c0c
    [ 4.246222] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88021f6f1c10
    [ 4.246703] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900192b5a18
    [ 4.246704] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 4.246705] [drm] Driver supports precise vblank timestamp query.
    [ 4.246720] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.246728] radeon 0000:01:00.0: radeon: using MSI.
    [ 4.246746] [drm] radeon: irq initialized.
    [ 4.704412] [drm] ring test on 0 succeeded in 2 usecs
    [ 4.704417] [drm] ring test on 1 succeeded in 1 usecs
    [ 4.704420] [drm] ring test on 2 succeeded in 1 usecs
    [ 4.704483] [drm] ring test on 3 succeeded in 4 usecs
    [ 4.704488] [drm] ring test on 4 succeeded in 1 usecs
    [ 4.892271] [drm] ring test on 5 succeeded in 2 usecs
    [ 4.892276] [drm] UVD initialized successfully.
    [ 4.892454] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 4.892510] [drm] ib test on ring 1 succeeded in 0 usecs
    [ 4.892562] [drm] ib test on ring 2 succeeded in 0 usecs
    [ 4.892627] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 4.892703] [drm] ib test on ring 4 succeeded in 1 usecs
    [ 5.045155] [drm] ib test on ring 5 succeeded
    [ 5.045348] [drm] Radeon Display Connectors
    [ 5.045349] [drm] Connector 0:
    [ 5.045350] [drm] DP-4
    [ 5.045351] [drm] HPD4
    [ 5.045352] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
    [ 5.045352] [drm] Encoders:
    [ 5.045353] [drm] DFP1: INTERNAL_UNIPHY2
    [ 5.045353] [drm] Connector 1:
    [ 5.045354] [drm] HDMI-A-4
    [ 5.045355] [drm] HPD1
    [ 5.045355] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
    [ 5.045356] [drm] Encoders:
    [ 5.045356] [drm] DFP2: INTERNAL_UNIPHY2
    [ 5.045357] [drm] Connector 2:
    [ 5.045358] [drm] DVI-I-1
    [ 5.045358] [drm] HPD2
    [ 5.045359] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
    [ 5.045359] [drm] Encoders:
    [ 5.045360] [drm] DFP3: INTERNAL_UNIPHY
    [ 5.045361] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 5.073351] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 5.092640] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 5.108315] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 5.117016] [drm] fb mappable at 0xE0479000
    [ 5.117017] [drm] vram apper at 0xE0000000
    [ 5.117018] [drm] size 4325376
    [ 5.117019] [drm] fb depth is 24
    [ 5.117019] [drm] pitch is 5632
    [ 5.117106] fbcon: radeondrmfb (fb0) is primary device
    [ 5.149170] Console: switching to colour frame buffer device 170x48
    [ 5.150711] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 5.150750] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 1
    [ 5.335178] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 5.341840] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 5.345398] systemd-journald[174]: Received request to flush runtime journal from PID 1
    [ 5.384082] systemd-journald[174]: File /var/log/journal/3ceb5e0931f846a88e9868dfe8919c31/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 5.571040] alx 0000:03:00.0: irq 49 for MSI/MSI-X
    [ 5.571201] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 10.650843] alx 0000:03:00.0: irq 49 for MSI/MSI-X
    [ 10.650985] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 15.592516] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
    [ 15.592732] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready

    Is this the log of a failed boot or of a successful one? If it is a successful one, please provide the log of a failed boot. This log seems to say that there are 3 displays detected, so I think this is a normal boot.
    What I would like to see is if the failed boot starts X or not. That is, assuming you use X. When the boot fails, do you see messages on your screen before it goes black?

  • Mountain Lion Desktop crash? Randomly it returns me to the login screen and I have restart all my apps

    So after install of Mountain Lion (never happened before) my desktop crashes and it returns me to the login screen.  After I login I have to restart all my apps.
    One morning this happened 5+ times in under an hour.  So my productivity has gone down :-(
    I work around this by only running three apps (finder, terminal & firefox), and then it sees to only happen 2-3 times a day...sigh.
    The only other odd thing and have no idea if it is related is that firefox was showing some animated image from the olympics and when I had it on one screen it was fine, when I had the window on the other screen, the image was not the right image, it looked like it had reached into the screen buffer of other applications and was displaying that (e.g. where there was a scrolling flame for the right image, there was some scrolling upside down text from my terminal when I had it on the other screen where the flame was supposed to be).
    An help on how to debug/solve would be helpful.

    You're welcome. If you use Zoom often try the new show controller feature. It's below where you turned zoom off. Once you turn it on you can use it to turn Zoom on and off. Plus you can use zoom as a magnifying glass instead of full screen.

  • Checkbox in discoverer desktop edition

    Hi,
    The query we are executing created for cross tab report have plenty of views and is returning null data which needs apps intialization which cannot be done from discoverer.
    I think loging into Discoverer desktop edition with oracle applications user would resolve the same.
    I have checked the checkbox in desktop edition and logged in as operations/welcome. but it is showing as invalid user name /password.
    please help in setup that must required to check and login to oracle applications user. Also Provide if there is any alternative.
    I would be very much thankful if you could help me on this.
    Best Regards,
    Katty.
    Edited by: karthik.thadakamalla on May 10, 2009 11:49 PM

    Hi,
    The apps initialization can be done by Discoverer provided that you are connecting to an Apps mode EUL with an applications username and password.
    You must specify that you want an Apps mode EUL when the EUL is created. Then when you connect to Disco Admin as the owner of the EUL you will be able to grant access privs and security to the Application users and responsbilities.
    If you have an apps mode EUL and still get an invalid username/password then this could be because the application is running in secure mode. Then you need to copy the .dbc file to a local directory. Search this forum for details on how to do this.
    Rod West

  • Discoverer Desktop Issues 10.1.2

    Hi,
    I am using Discoverer Admin and Desktop both of Verions 10.1.2
    I have no issue with Admin; I could do successfully all the work here.
    In Desktop i have login successfully as Application user; and created simple Order Report workbook (Order_Report.DIS) and saved it.
    Again when i login as application user in desktop; When i try to open my existing workbook (Order_Report.DIS); It will prompt me
    Do you want to run the query for the sheet Ord_report; Yes/No; If i select option as Yes i am getting error mesg as Failed to connect to database; If i choose No I will get empty sheet; In either case I will see empty sheet appears; From the Tool Bar if i select Sheet --> Refersh Sheet; I am able to see records in my sheet.
    When i continue working on this sheet; All of sudden i get error screen as Oracle Discoverer Desktop has encountered a problem and needs to close
    Basically i have two problems in desktop
    1. When I open workbook i get error as Failed to connect to database
    2. All of sudden i get vague error as Oracle Discoverer Desktop has encountered a problem and needs to close
    I would appreicate if some one can help on this.
    Thanks!!
    Uday

    Hi,
    I have the same issue with Discoverer Plus 10g Rel 1 (10.2.0.2 )
    Desktop and Administrator are working good. So, I cannot resolve it by re-installation.
    Also, this is not reproducible. Sometimes it works very smoothly, but sometimes it gives error for the same report.
    Any idea ?
    Thanks!
    Yogini

  • Discoverer Desktop Graphing Questions

    I have several questions about the graphing tool in Discoverer Desktop:
    1. I'm bringing in a customer id field which I convert with a to_char in the query from a numeric field. Most of them are 5-digit, but some are 4. I notice in the x-axis the customer id's appear only for the 5 digit id's, and for the 4-digit ones the identifier appears. i.e. if the 5th record has an id of 1508, instead of displaying 1508 it displays 5. Does anyone know how to correct this?
    2. In the y-axis values, is it possible to display more than 5 decimal places? (We're dealing with very small percentages). When I try to enter 6 or higher as the decimal value in Options, it says invalid number.
    3. When I open an existing workbook, it readjusts the y-axis scale to a max of 1, when I've set it to .0001. How I can I make this retain my scale values?
    4. Is it possible to display the y-values in the graph area itself next to the plot points?
    Thanks for any help!!!!

    Hi paul,
    Its a good idea to upgrade from 4i to 10g 4i is no more used by many and their are some issues or bugs with it.The latest version is 11g which has been released 1 week back.If not go with 10g version available.
    1) Do all reports have to be stored on the database to allow them to be accessed by Plus or Viewer? Can only the 10G client version open files from a local hardrive or shared network drive?Yes they have to stored in the database so any ened user can access them from plus or viewer.
    Can only one report be open at any given time with Plus or Viewer? In client it is possible to have 2 reports open at the same time to facilitate easier comparisons.Yes,if the reports are registered as different reports and if the end user has access to both the reports thn he can open and compare it OR if both reports are in same workbook as different sheets than its easy to view or compare.
    NULL values are still showing the word "NULL" even though in Tools Options we have set it to show blank, existing reports are still using the NULL value.It should show blank,might be some problem.In discoverer 10g i think you will not find this issues.
    Hope this helps you.
    Best Wishes,
    kranthi.

  • Discoverer Desktop 10.1.2 error while opening the report.

    Hi ,
    Do you know why I would be able to open a report from a Discoverer Plus responsibility in Oracle Financials but not from Discoverer Desktop?
    The report was owned by User1 and shared with both Admin1 and AdminUser1. I have tried accessing the report with both user names, and in both cases, I get the error shown below when I am logged into Desktop but I do not get the error when I log in through the application.
    Error message:
    Join configuration cannot be resolved. Reason: more than 1 of the detail folder uses non-aggregated items
    Thanks!
    Radhakrishna

    Hi,
    try the solution suggested in below thread.
    Join Configuration cannot be Resolved!!!
    thanks!
    Sunil

  • Discoverer Desktop Report issue

    Hi,
    One of my user is facing a format issue while running the report in Oracle Discoverer 10g. The report produces the following out put.
    count(Col A)     Col B     Col C     Col D
    12          A     200709     12-Sep-07
    11          A     200709     21-Sep-07
    24          B     200709     11-Sep-07
    32          B     200709     13-Sep-07
    10          B     200710     15-Oct-07
    Col A is of number data type, Col B character, Col C is number and Col D is date
    if Col D is removed from the report, the user is getting the result in following format
    count(Col A)     Col B     Col C
    23          A     401418
    56          B     401418
    10          B     200710
    i.e. col C displays the sum of the value based in Col B instead of displaying it as 200709.
    but when I ran the report from my end I'm getting the result in a proper manner.
    count(Col A)     Col B     Col C
    23          A     200709
    56          B     200709
    10          B     200710
    Please help me in sorting out this issue.
    Environment Details:
    Oracle Discoverer Admin 10g(9.0.4)
    Oracle Discoverer Desktop 10g (9.0.4)
    End User Layer 5.0.2
    Thanks in Advance.
    Regards,
    SS

    @Himanshu3jul:
    I'm not using any Oracle Application secure views. Also, the data that are being displayed is proper if Col D is not removed. If user removes Col D, the result is getting aggregated based on Col B but for me it is showing in a perfect manner.
    @puppethead:
    I'm afraid I may not be able to the check the registry on user machine since user is sitting at a different location.
    @Rod West:
    The default Aggregate property for Col C is set to <none> and it is grayed out. I'm not able to change it too. Also, if it is a bug then I should get the result as what user receives but I'm not facing any issues in that report but only user is.
    Please let me know what can be done next to figure it out.
    Also, I have the screen shots from my machine and from user’s. if you think that it will really help then I can post it. please let me know where and how I can post it so that you can have a look at it.
    Thanks,
    SS

  • Report Layout difference in Discoverer Desktop and Discoverer Viewer

    Hi,
    A report was developed in Discoverer Desktop. It is having some 10 columns as data points. The summarized columns for those 10 columns are required. But only 3 columns should be displayed in Detailed Data Points. So we shrinked(brought together) all the unwanted columns keeping 3 datapoints displayed. Now it is working fine in the discovere Desktop. But when we open the same report in the Discoverer Viewer, all the 10 columns are displayed in the Detailed Data Points as well.
    Thanks in Advance
    Regards
    Rakesh

    hi Michael,
    good morning..hope u had a good sleep.
    as per your last thought y'day, even though i create a function for the sum of season values n select those columns into the report, those will not be shown as summarized columns on right hand side of the report. they will be shown as datapoints for every month in that selected season.
    i think the only possible solution for like this report is to hide those unwanted columns. for this we have hidden checkbox option in tools->sort while developing. but this option is available only for tabular reports.
    if u come up with any fresh solution for the fresh day...i am glad.
    Thanks,
    _Rakesh.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Problem while installing discoverer desktop edition

    HI
    I find few error messages while installing discoverer desktop edition..
    When i give oracle home as
    name:OracleHome92
    Location: DiscovererDesk
    it gives me a error
    " oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
    When i give oracle home as
    name:OraHome92
    It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
    "The location specified 'E:\Oracle\ora92', is already used an oracle home for an
    'Oracle 82 beta'.It cann't be used as an oracle home for nt."
    I have oracle 9i and form6i,report 6i installed in my system.
    Please suggest me ..
    Regards,
    Satya

    Hi
    The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
    Here's a workflow:
    1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
    2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
    3. Click the Next button
    4. Select TCP/IP (Internet Protocol) and click the Next button
    5. Enter the fully qualified domain name or IP address of the server that contains the database
    6. In Port, enter the port number - it defaults to 1521
    7. Click the Next button
    8.In Database SID enter the name of the database, then click the Next button
    9.Click the Test Service button
    10. Provide a username and password for an account on the database, then click the Test button
    11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
    12. When you see: Connecting.... The connection test was successful click the Done button
    13. Click the Next button
    14. Click the Finish button
    You should now have a valid TNSNAMES connection for use by Discoverer 4
    Best wishes
    Michael

  • Discoverer Desktop Connections Fails With Invalid Username/Pass in r12

    Hi all;
    I have problem. I can login Discoverer Administrator from my localmachine and i can see what ppl did it there.. But when i try to login Discoverer Desktop from my localmachine its gives me Invalid Username/Pass. error.
    I even cant login my system from browser :
    http://xx.com:7778/discoverer/plus << pages comes and i fill in the blanks area like:
    Connect to : Oracle Application
    Username: sysadmin
    pass: ***
    Database: VIS
    I found some document from forums. Whihc is :
    Discoverer Is Unable to Connect to Oracle Applications database: invalid username/password      Doc ID: Note:467919.1
    Discoverer 10g (10.1.2) Connectons To Oracle E-Business Suite 12 Fails With 'Invalid Username/Password'      Doc ID: Note:443661.1
    But before i apply those patch i want to take advice from you. Coz i can login Discoverer Administrator and can use it but cant login Discoverer Desktop...its kind of wierd... i already checked what i have done in installtion and its all seems correct.
    Any idea;
    Regards
    Helios

    Discoverer supports two kinds of connections - database schema connections and apps connections. For Disco Admin, you login using a database schema, which, as you stated, works. For Disco User you login using an Apps user account (for which there is a no equivalent database scherma). To enable such a connection, you need to check the "oracle applications user" check box on the 10g Disco login screen. Also, under Tools --> Options, in the Connection tab, make sure that "connect to both standard and applications EULs" radio button is selected.
    HTH
    Srini

  • Oracle Discoverer Desktop Report output showing unicode characters

    Hi,
    Oracle Discoverer Desktop 4i version Report output showing the below unicode characters.
    kara¿ah L¿MAK HOLD¿NG A.¿
    We ran the same query in sql at that time the data showing correctly.
    Please let me know, is there any language settings/ NLS settings are need to set
    Thanks in Advance.

    Hi
    Let me give you some background. In the Windows registy, every Oracle Home has a setting called NLS_LANG. This is the variable that controls, among other things, the numeric characters and the language used. The variable is made up of 3 parts. These are:
    language_territory.characterset
    Notice how there is an underscore character between the first two variables and a period between the last two. This is very important and must not be changed.
    So, for example, most American settings look like this: AMERICAN_AMERICA.WE8MSWIN1252
    The second variable, the territory, controls the default date, monetary, and numeric formats and must correspond to the name of a country. So if I wanted to use the Greek settings for numeric formatting, editing the NLS_LANG for Discoverer Desktop to this setting will do the trick:
    AMERICAN_GREECE.WE8MSWIN1252
    Can you please check your settings? Here's a workflow:
    a) Open up your registry by running Regedit
    b) Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
    c) Look for the Oracle Home corresponding to where Discoverer Desktop is installed. It's probably called KEY_BIToolsHome_1
    d) Clicking on the Oracle Home will display all of the variables
    e) Take a look at the variable called NLS_LANG - if it is correct Exit the registry
    f) If its not correct please right-click on it and from the pop-up select Modify
    f) Change the variable to the right setting
    g) Click the OK button to save your change
    h) Exit the registry
    Best wishes
    Michael

  • USER UNABLE TO REFRESH DISCOVERER REPORT IN DISCOVERER DESKTOP 10g

    Dear All,
    HELP!!!
    A new user is unable to refresh discoverer Reports in Desktop. All priviledges have been granted to username in Disco Admin and Usre is able to log into oracle Apps.
    On the PC the user logged into someone else can log into Discoverer Desktop and run/refresh discoverer reports without any issues. Hence Ithink neither the PC nor the Discoverer installation is the problem.
    Can anyone help? What setup/profile needs to be completed in order for the user to be able to run Disco reports.
    Pls note that the following has been completed:
    1. Business Areas Assigned to user and his responsibilities.
    2. Desktop/Plus Privileges assigned.
    3. Allow administration - DISABLED - NOT TICKED
    Many thx
    DI

    Does this person just need to run reports? Or does this person also need to create reports? If the person just needs to run reports, try using Viewer for that person, rather than Desktop. This may be something that you need to log a service request with Oracle to get resolved. Pretty strange that can bring items into a new worksheet, but it won't run. Maybe there is an Oracle applications security issue (since logging in as another person does work)? You may be beating your brains out trying to find a Discoverer problem when it might be an application security problem. Though this is a wild guess on my part.
    John Dickey

Maybe you are looking for

  • HP 6110xi All-In-One Deskjet Printer

    I am unable to locate a new "latch cover door" that covers and holds the printer cartridge in place. The small 'tab' has broken off of the front of this "latch cover door" and am unable to close the door such that it stays closed. Can anyone help wit

  • "report" not defined in BPM tutorial

    I downloaded BPM suite to test it out and the report variable is not defined. The tutorial said it was self defined, but I got errors when I tried to add result == "Accepted" and report.isApproved == true in the Adding a Condition Transaction part of

  • House bank and accountID

    Hello, In transaction FBZP I have a house bank with three account ID. My client wants to pay with tha same payment method, the same currency and the same house bank ( but sometimes with one accountID and others time with different account ID). In ord

  • How do I change the mobile number re messages on iPad air

    How do I chane the mobile number re messages on my new ipad air.  It seems to be coming up with my husbands number ...

  • Muse: Needed to replace computer.

    Muse: Needed to replace my computer. Copied Muse files all into the 'same place' on the C drive in my new computer. Now most of the assets are marked 'Upload' - notably the several hundred pdf's. Tried relinking several of them to the new folder cont