Discoverer Error - "Failed to open document"

Hi,
I'm having this wierd problem. Sometimes, I get a message "
Failed to open Document" error on Discoverer 4 User edition. I
cannot open the worksheet I create. It does not display any
error code or message.
Please advice

I assume that you created the workbook in Discoverer Desktop and it does not work in either Plus or viewer. Does recreating the workbook under a new name correct the problem? IF not can you recreate the workbooks through Discoverer Plus and format the layout through the Discoverer Desktop. Does this fix the problem?
Christopher
www.iloveapple.com/disco/

Similar Messages

  • HELP!Crystal 10 -- ''Failed to open document. Read past end TSLV record.''

    I create new report using Wizard, Add Command (Oracle query).
    I see table in my report, I can run ... Then I save my report and close it.
    But when I try to open again -- I can't open again and I see error:  "Failed to open document. Read past end TSLV record."
    Please, help me ! :((((

    The following SAP Note may help you!!!!
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    Regards,
    Raghavendra

  • Crystal 10 -- ''Failed to open document. Read past end TSLV record.''

    I create new report using Wizard, Add Command (Oracle query).
    I see table in my report, I can run ... Then I save my report and close it.
    But when I try to open again -- I can't open again and I see error:  "Failed to open document. Read past end TSLV record."
    Please, help me ! :((((

    duplicate - please do not post multiple times

  • Error message: "Failed to open document

    Error message: "Failed to open document" received often while trying to open a workbook. This occurs randomly: different PC's receive this error in different workbooks while other PC's succeed in opening same workbook. Can someone advice?

    I had same problem when we were modifying few workbooks.
    when i had tried to open workbook in discoverer plus it gave me error like what u r getting. after that i opened it in desktop and without doing any changed i saved it and tried to open it again in Plus and it worked. Logic vs Magic !!!!

  • Flash5.5 "failed to open document" error message

    Yesterday I worked on two files both worked fine.  I saved my work and a backup. This morning I got the dreadful message "failed to open document" followed by the path to the file. The output panel gave me this message:
    The following JavaScript error(s) occurred:
    In file "/Users/lucilarios/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Javascript/ObjectFindAndSelect.jsfl":
    Cannot find file /Users/lucilarios/Desktop/Trabajo_Macondo3/ProjectAlgebra09/TutorialsAlgebra/Integers/Law sOfAddition/NewProject/AssocLawAdd.fla.
    The info on the file size shows 0 bites
    Both the file and its backup were corrupted.
    Are there compatibility issues betweenAdobe CS5.5 Programs and Mac OX Lion?  Lion has crashed my computer several times and other programs like Photoshop and Adobe Bridge have also misbehaved.  Has anybody experienced any issues with Lion and Flash?

    Hi ,
    I'm sorry for the inconvience . We are actively working on with customers in resolving this issue . 
    Please help us answer the following question below so we can reproduce this issue and provide some solution .
    About      the location where .fla file is being saved
    To a local drive? (eg. hard drive, SSD drive, USB key,       SD card, opened as email attachment, opened from a zip archive, etc)
    …or over a network? (eg. shared Windows folder across       Active Directory network, SMB share between OSX machines, symbolic       link/junction points to path) If so, do they have full file permissions       to write to that folder?
    The      .fla file before corruption/crash
    Reproducible from a new document?
    File history. eg. originally created in CS4, saved in       CS5 and re-saved in CS5.5
    3. Where was the backup copy saved ?
    4. Did flash crash y'day while you were saving your Fla file ?
    Can you please  email me your corrupt fla as well as any previous version of a working  backup copy if any to [email protected] .
    Thanks
    Sukhbir
    Flash Authoring

  • Access Denied - Failed to Open Document

    I've done a few hours of searching for a solution to my problem with no specific answer helping me.
    I recently upgraded 63 various reports from Crystal Reports version 8.5 to Crystal Reports 2011 (using a Windows 7 box). I realigned all of the report fields, and ensured all the variables within the report worked as they did before. Basically all 63 worked like old. I deployed these reports to a Windows 2012 R2 server which has Crystal Reports 2011 installed (as well as Crystal Report Runtime for .Net Framework) and 4 out of 63 no longer work. When I try to open them with Crystal Reports 2011 it gives me an error 'Access Denied [line break] Failed to Open Document' In the Event Viewer for Windows it gives me the following details as to what happened.
    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             crw32.exe
      Application Version:                           14.0.4.738
      Application Timestamp:                     4fd6ccca
      Fault Module Name:                          crw32.exe
      Fault Module Version:                        14.0.4.738
      Fault Module Timestamp:                  4fd6ccca
      Exception Code:                                  c0000005
      Exception Offset:                                000cf0e5
      OS Version:                                          6.1.7601.2.1.0.272.7
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    Here are the things I've done to try and troubleshoot/resolve it:
    Re-upgrade the original CR 8.5 Report to 2011 and migrate it to server. (Didn't work)
    Migrate the original CR 8.5 Report to Windows 2012 Server and try to upgrade it there (Same error on 8.5 report)
    Repair/Reinstall Crystal Reports 2011 on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
    Repair/Reinstall Crystal Reports Runtime for .Net Framework on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
    Add three System Environment Variables to enable Crystal Reports Error Logging through CRLogger.dll (LOGGING_DIR = C:\CRLOGGING; LOGGING_ENABLED_ASSERT = 1; LOGGING_ENABLED_RUNTIME = 30)
    Now..the error logging gives me error numbers, and which line of which .cpp file is encountering a problem, but that really doesn't help me because I don't have access to Crystal Reports Source Code. (Pasted below for those who are really curious).
    I've seen Ludek or other SAP staff shut down discussions with some line about 'Report Development is not a ...' but I feel that this isn't related to how the report was developed and instead something in the application not jiving well with something else.
    Any help or suggestions would be incredibly well received and appreciated.
    Time Stamp
    Thread ID
    File Name
    Line Number
    Logged Data
    Level
    2015-4-24-12-48-43
    3820
    ..\cserrinf.cpp
    523
    Error 31831 (..\..\src\data\preQEFileIO.cpp, 3578)
    1
    2015-4-24-12-48-43
    3820
    ..\cserrinf.cpp
    523
    Error 31831 (..\..\src\data\preQEFileIO.cpp, 3847)
    1

    Hi Thomas,
    Statistically speaking, 4 out of 63 reports isn't bad for a migration.  So something in these 4 reports is different from the others.  I've had this happen if there are images or an object inserted into the report and the update doesn't know how to handle that object. 
    The best way to try and find the problem is by process of elimination.  Open the reports again in 8.5 and remove a couple of things at a time.  Save it then open in 2011 and see if it fails or not.  Continue doing that until the report actually opens.  The problem could be anything from a formula or printer settings to attachments. 
    Good luck,
    Brian

  • Crystal Reports ActiveX Designer Failed to open document

    Yesterday I created a report in Visual Studio 2008 with about 20 subreports, each subreport containing a single aggregate query (i.e count or sum). I then saved the report file. Hours later when I attempted to reopen the report in Visual Studio I recived the message box "Crystal Reports ActiveX Designer Failed to open document". The report file was completely unusable - it could not be opened for editting.
    Today I repeated the process twice (once ith multiple subreports and once with all aggregate queries combined in a single subreport), only to have the new report files become unusable with the same error message. I am completely shocked at this behaviour from Crystal Reports. I have now spent 10+ hours with no usable report. I realy need a fix for this ASAP!!! Any suggestions would be greatlhy appreciated.

    Hi Jeff,
    Just wanted to confirm you were on SP1.
    I've found that these types of error are usually due to corrupt system files or sometimes even Anti-virus software denying access. If there is no error it's not CR corrupting the file.
    Look in your AV logs to see if it's logging anything.
    Another possibility is with MS pushing out patches they can also cause problems. I've see them change permissions on our dependencies that can cause problems.
    Sorry I can't be specific but without seeing your report or any details you'll have to determine at which step in the report it stops working.
    Can you save any reports now?
    Steps to debug, create a new report with no subreports and save it. Then re-open, if that works then start adding one subreport and then save/open. It may be something related to either the subreports or the number of subreports.
    You could try doing a repair install of VS and SP1.
    Was this working at one time or is this something new, do you have other reports that are similar that have problems?
    You need to debug the report and find out what is causing it to be corrupted. Try adding the 20th subreport and then delete it also.
    Don

  • Failed to Open Document (file not 0 bytes) - Suggested resolution!

    (Posting this to assist others with same problem - I have actually resolved for me - please note Adobe developers for suggested improvement for work around… there is still a bug in there somewhere with corrupt files)
    Using Flash Pro CS6 (v 12.0.0.481) on Mac OSX 7.5
    Problem:
    Tried to open a file that I was working on last night (after MAC crashed and untidy shut down, but had saved file beforehand) this morning and got the error message "Failed to open document". The file has 10 MB of size (not 0 bit like other crashes that were not recoverable!).
    Resolution (work around): 
    Managed to recover the file using a combo of ideas I found on the web.
    First things first... check the file size, if the file size is 0, your pretty much stuffed since the file is empty, sorry. If however the file is populated, then this is what I did:
    1) copied the file and saved it to a new location (so working on a duplicate)
    2) downloaded a rar file tool (Winrar or I used The Unarchiver for Mac)
    3) Change the name of the file extension of that duplicate to .rar (you will get a warning message, accept it)
    4) Double click on the .rar file to open it using the .rar extraction ap you selected - you will be asked to say where you want that file to be extracted to - I just created a new folder on my desktop. In the process of extracting that file (believe it or not it is stored up as many parts), I got error messages that 3 images that were used in the file were corrupted. I selected to continue and ignore that. I made note of the corrupted files set.
    5) Locate the problem files (mine were in a folder called "Library" in the extracted file set) and delete those images *NOTE: you should have these copied elsewhere since they are brought into flash generally. BUT you might also like to skip this step and try the step below first - I didn't - it could be that you don't actually need to delete those images. If the step below doesn't work, then come back here and try again)
    6) In the new extracted file directory, there should be the same file name you want, just not as .fla but as a .xfl version. This means an uncompressed version (I have no idea what that really means) - double click on that same named file.xfl
    7) This .xfl file then opened for me in Flash
    8) Save that file again as .fla, add back any images that were needed and corrupted - mine were not needed so I just left them.
    I love working with flash but the instability is really a problem - I pretty much have to save a working file to another location and then try to reopen that before closing the original or shutting down / restarting.  This time I was lucky (only 1 hour of research and trial and error to recover) but previously I have had 0 byte files and had no choice but to start again (since time machine failed to save earlier versions).
    Suggested resolution adobe developers:
    It would be very useful if Flash told you which files were corrupted and then gave you an option to open the document with corrupted files removed as a copied version - at least this way we could work with most of the file to rebuild.

    This problem has been around for years and the solution you suggest is only the second best in my opinion.
    The best would be to have a Failsafe like many other products/companies already have going: Corel, Autodesk, Microsoft etc.:
    If their programs stop working they alert you to the fact and give you the opportunity to safe a copy of the file under a different name.
    Can`t be Rocket Science. If you can`t make your products work reliable, at least come up with manageable solutions.
    There is at least one day a month were I would be really lost without the ability of our company to rewind to the xfl version of yesterday.
    I can`t imagine what someone that works as a freelancer and hasn`t got the redundancy of companies has to go through if Flash burns him/her on a regular basis.

  • Web Analysis 9.3.1: Error occured while opening document. Document ID = {0}

    Hi Experts,
    I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
    Error occured while opening document. Document ID = {0}
    The report opens with its header having company log & two buttons, but data grid remains empty.
    The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
    Could anyone please through more observation on this issue. Let me know if any further information is needed!.
    Kindly suggest me any way to resolve it.
    Thanks,
    Krishan

    The isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
    but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource)

  • WebAnalysis Error: Error occured while opening document. Document ID = {0}

    Hi Experts,
    I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
    Error occured while opening document. Document ID = {0}
    The report opens with its header having company log & two buttons, but data grid remains empty.
    Kindly suggest me any way to resolve it.
    Thanks,
    Krishan

    Hi Natesh,
    Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
    Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
    * Yes, the source is Essbase.*
    If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
    * The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
    If source is based on a Relational SQL query, chances are that- Query is no longer valid.
    * NA as this statement is NOT applicable to our source.*
    If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
    * This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
    Could you please through more observation on this issue. Let me know if any further information is needed!.
    Thanks for your time.
    Regards,
    Krishan
    Edited by: user10475612 on Nov 8, 2009 1:07 PM
    Edited by: user10475612 on Nov 8, 2009 1:09 PM
    Edited by: user10475612 on Nov 8, 2009 1:12 PM

  • Errors (libGL error: failed to open drm) in Gnome Startup & StartUp

    Hi,
    I started installing ArchLinux and want to use Gnome but got some error messages on start up.
    My System is a Thinkpad T400s with Intel GMA 4500MHD.
    I have installed:
    pacman -S gnome xorg-server dbus xorg-xinit xf86-video-intel
    from https://wiki.archlinux.org/index.php/Intel my graphic chip is supported.
    X Server works ("Xorg -retro" and "startx /usr/bin/xterm" is working).
    xinit gnome-session
    Starts Gnome around a Xterm (seems to be so).
    In this Xterm window there are a lot of messages with errors I don't track down:
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
    libGL error: failed to open drm device: Permission denied
    libGL error: failed to load driver: i965
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
    libGL: Can't open configuration file /home/UserHome/.drirc: No such file or directory.
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TAzQAG
    GNOME_KEYRING_PID=766
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TAzQAG
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TAzQAG
    SSH_AUTH_SOCK=/run/user/1000/keyring-TAzQAG/ssh
    GNOME_KEYRING_CONTROL=/run/user/1000/keyring-TAzQAG
    SSH_AUTH_SOCK=/run/user/1000/keyring-TAzQAG/ssh
    GPG_AGENT_INFO=/run/user/1000/keyring-TAzQAG/gpg:0:1
    (gnome-settings-daemon:762): power-plugin-WARNING **: session inhibition not available, gnome-session is not available
    (gnome-settings-daemon:762): color-plugin-WARNING **: failed to create device: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-device auth
    (gnome-settings-daemon:762): color-plugin-WARNING **: failed to create device: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-device auth
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
    libGL error: failed to open drm device: Permission denied
    libGL error: failed to load driver: i965
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
    libGL: Can't open configuration file /home/UserHome/.drirc: No such file or directory.
    libGL: Can't open configuration file /home/UserHome/.drirc: No such file or directory.
    Failed to play sound: File or data not found
    ** (nm-applet:811): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
    ** Message: applet now removed from the notification area
    ** (nm-applet:811): WARNING **: fetch_connections_done: error fetching connections: (32) Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details..
    ** (nm-applet:811): WARNING **: Failed to register as an agent: (32) Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
    (gnome-shell:796): Bluetooth-WARNING **: Could not open RFKILL control device, please verify your installation
    Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
    JS LOG: GNOME Shell started at Sun Nov 11 2012 19:13:44 GMT+0100 (CET)
    ** Message: applet now embedded in the notification area
    Window manager warning: Log level 16: fetch_connections_done: error fetching connections: (32) Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details..
    Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
    Here are the xorg.log: http://pastebin.com/EUrZ7tiz
    What are the problems here?
    What I have to change to fix the errors?
    Last edited by G.Blau (2012-11-13 01:31:22)

    Add yourself to the "video" group and re-login.

  • Report works in CR10, on enterprise server error: Failed to open a rowset

    Hi,
    I created a report, which works fine in Crystal Reports (designer).
    After uploading the report to the enterprise-server it don't work anymore.
    I use the same database and the same parameters, but get the following error:
    Failed to open a rowset. File D:\Program Files\Crystal Decisions\Enterprise 10\Data\procSched\FDMPLS082M.reportjobserver\~tmp14f4559568a82d0.rpt.
    For other reports it works fine.
    Edited by: Joris Stoop on Aug 25, 2008 11:25 AM

    Does the server have the same database DSN named the same? Also, you may want to try installing CR on the server and see if the report works there.

  • "failed to open document" help

    I have been working on a flash file for school using CS5.5.  Everything was working, and I even downloaded a trial of CS5.5 on my computer to work on the project, but now I am in class and it will not open.  It keeps saying "failed to open document."  I'm not sure what went wrong, and I need this file by next thursday for my class.  I need to know if there is any way to fix this without redoing my entire project from scratch.

    thank you! I'll let you know if it worked!
    the only problem is that none of my tweens and actions are correct.

  • *ERROR: failed to open file " export directory path /ABAP/DATA/SAPSTR.LST

    Hello experts,
    I am doing system export.
    as per the system copy guide I follows all steps.
    when I tried for export preparation.
    I got following error in  "/tmp/sapinst_instdir/ERPEhP4/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/PREEXP/R3ldctlExport.log"
    ERROR: failed to open file "/db2/PRD/sapdata4/export_prd/ABAP/DATA/SAPSTR.LST"
    /db2/PRD/sapdata4/export_prd is my export directory.
    but I found that the "SAPSTR.LST" is not exist in the location.
    also I don't find any log regarding this error.
    how to resolve this? please guide.

    Hi Rupesh,
    In continuation of previous mail, there is keyboard problem hence spelling mistakes.
    Various possible solutions:
    Report SMIGR_CREATE_DDL has to be executed before starting export preparation.
    OR
    Download llatest kernel patch and apply them in /spmnt/<SID>/exe
    make sure download latest patch R3ldctl file and R3load from SAP Marketplace and apply them in to /sapmnt/<SID>/exe.
    Make sure export dump folder should be in local drives (in windows) or local filesystems i.e.do not  use network drives  (windows) or NFS (in case of unix).
    FInally check permission by using chmod 777 in exportdump folder in case of unix.
    Regards
    APR

  • NZ Library Error: Failed to open the wallet

    I installed Oracle Http Server (Apache 2 distributed with Oracle 11g database software) in the same server (but in a different Oracle home) where I had installed Oracle 11g. The installation was fine. However, I haven't been able to start the Http Server at all. When I checked all the logs, I finally found the following error. What do I need to do?
    NZ Library Error: Failed to open the wallet
    Thanks.
    Andy

    I know it has been a long time since anyone has posted on this thread but I am hoping that Jay_Kard might get notified.
    I have had almost exactly the same problem.  I have about 50 reports that are available to users through InfoView, they have been around for a year or more.  Suddenly a few weeks ago two of them stopped working, the users get the "Failed to make the connection" error.
    I am using Crystal Reports 11.5 and Crystal Reports Server 11.5 with an ODBC connection to a SQL Server 2005 database.  The 2 reports that are not working both use a series of dynamic prompts for the users to enter report parameters, but so do the others that continue to work well.  Before reading this thread I had already tried a lot of the suggestions from this thread, I can't get anything to work.  The ODBC DSN on the server is set up and named exactly like the DSN that I use for development, I have rebuilt the dynamic prompts used on these reports, I can't get these 2 reports to work.
    One other odd thing is that I, with admin rights to all reports in InfoView, can view these failing reports both from Crystal and from InfoView following the same path as my users to access the reports.  I don't know if that will help anyone figure out the problem.
    Jay, if you happen to read this I would love to know if you were able to get your problem resolved, I may need the same solution.
    Thanks.

Maybe you are looking for