Disk is locked message

Just started getting this message when I try to open itunes. It was working fine and just started this. We have 4 user accounts that share the folder so when someone buys a song it is available to all users on the computer. This was setup and working fine. Keep in mind I'm new to the mac from windows and I'm a bit clueless. I tried removing the itunes library and putting it on the desktop, restarting Itunes (which it came back up without the message or any songs) then quit itunes and put the library back where it was and that did nothing. Any and all help greatly appreciated.

The exact message is as follows: "The itunes Library file is locked, on a locked disk, or you do not have write permission for this file."
My account is the administrator account. Itunes on my side no longer does that, it comes up to the default page with no library. I don't know if I somehow deleted it (I don't think so because I can see all the songs) or it's no longer being directed to that library. The other 3 users still get the message but when I try to use finder to figure out the permissions and the other things you mentioned it won't show me the contents of the Itunes folder. I'm a rookie on this Mac and am trying to fight my way through things I could probably figure out on a windows pc but I'm struggling mightily. I really do appreciate any and all help.

Similar Messages

  • Error message "disk is locked" when inserting blank DVD

    My G4 is supposed to be able to burn a DVD, but when I insert the sample DVD that came with the computer when it was new, I keep getting the "disk is locked" message. It also happens with other DVD's that I bought specifically to use with the G4. I would appreciate your suggestions.
    G4   Mac OS 9.2.x  

    VenturaGutek
    Any optical drive software that is worth its salt should enable burning of data discs (4.7GB or 8.5GB in the case of DVDs) as well as of specialized file formats. That said, however, one of the commonest reasons for failure to burn, even failure to recognize an optical drive, is extension conflict. This was especially true of Roxio's Toast v5.x, when using which it was necessary to disable all Apple extensions, USB and FireWire, so that control of the drive could be taken by Toast extensions. I had to do this only recently to get a friend's LaCie DVD-R burner to be recognized as a DVD (rather than CD) burner by a B&W under OS 9.2.2, let alone to burn DVDs. That possibility was the reason for asking about your software. However, if you are using only Apple software, there should be no issue of software conflicts of this nature.
    Without wishing or intending to fob you off, I suggest that you will get much more up-to-the-moment guidance from active fellow-sufferers than is likely in this antediluvian category if you approach them in the iDVD specialist forums, which are divided into iDVD 6, 5, and 4 and under.
    Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT     System 6.0.8 to OS 10.4.x

  • The attempt to burn a disc failed. The disk is locked and cannot be written

    I am having a problem burning CDs. iTunes begins to burn CD than cancels with the following message "The attempt to burn a disc failed. The disk is locked and cannot be written." After some research I found the following article "Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error." I followed directions as noted, this worked for the burning of one CD, then failed message returned. I have tried different CDs and lowering record speed to no avail. Burner worked up until updating to latest iTunes. Here is the diagnostic report
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Sony Corporation PCG-GRT390ZP(UC)
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Video Driver: NVIDIA GeForce FX Go5600 (Sony)\GeForce FX Go5600
    IDE\DiskIC25N060ATMR04-0______________________MO3OAD1A, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskLexar__JumpDrive______1.00, Bus Type USB
    USBSTOR\DiskSony___MSC-U04________3.00, Bus Type USB
    IDE\CdRomSONYCD-RW__CRX830E_____________________JFK1___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    E: SONY CD-RW CRX830E, Rev JFK1
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4.
    The drive CDRW speeds are: 4 0 0 0 0 0 0 0.
    The last failed audio CD burn had error code -46(0xffffffd2). It happened on drive E: SONY CD-RW CRX830E on CDRW media at speed 4X.
    Any help would be appreciated.
    Sony Vaio Windows XP

    hmmmm. i see that there's a chipset driver revision listed on the drivers and downloads page for your M520:
    Gateway M520 > Windows XP
    are your chipset drivers currently up to date?

  • Windows - No Disk Exception Processing Message on iTunes start-up

    Every time I start up iTunes I get this annoying Windows Error Message.
    Windows – No Disk
    Exception Processing Message c000001e Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c
    Cancel Try Again Continue
    If I click any combination of the three buttons many times it eventually goes away.
    Then, it also happens when doing any operation with a song file such as conveting format or it rate. In this case it may lock up iTunes and require a C-A-D to get out of the application.
    HELP!!
    I've tried updating the iTunes software
    Medion   Windows XP  
    Medion   Windows XP  

    Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
    Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives. 
    Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
    Hunt

  • Ipod write protection error - disk is locked and cannot be written to

    Has anyone experienced this 'disk is locked and cannot be written to' when trying to update their ipod mini? I've tried everything, including all 4 R's, but still get the same message. And now that i've restored my ipod to its factory settings, I can no longer see my ipod in iTunes 7. So frustrating! Any thoughts are appreciated...i've just about given up. thanks.
    iPod Mini   Windows XP Pro  

    Welcome to Apple Discussions!
    First off, make sure everything is updated...
    http://www.apple.com/ipod/download
    http://www.apple.com/itunes/download
    Now see if restoring your iPod helps...
    http://docs.info.apple.com/article.html?artnum=60983
    btabz

  • Downloaded Mountain Lion from App Store, but it says by disk is locked and won't let me choose the hard drive for installation

    I'm struggling to get Mountain Lion installed on my machine, but what is worse is that it has essentially rendered my computer useless (and of course I need to use it urgently). After downloading and installing from the App Store, I have run into some significant problems.
    On install, when prompted to "select the disk where you want to install OS X" the hard drive is greyed out and a message comes up that says "The disk is locked."
    So when I back out of the install, I am given the option for Disk Utility, Reinstall OS X (same results as before)  or Restore from Backup (not backed up).
    On the Disk Utility, I can hit Verify Disk and it names an error and says to hit Repair Disk. The error is an "Invalid Sibling Link. The volume Macintost HD was found corrupt and needs to be repaired." Unfortunately, Repair Disk is greyed out and I can't hit it.
    What I want to do is just forget the entire process at this point and scrap the upgrade until I have time to figure out what is going on. Is there a way to abort at this point?
    Thanks for any help!

    Your welcome!
    You should always have and keep an up to date backup.
    Sounds like you need something a little stronger than Disk Utility. At this point I have no way of knowing if Disk Warrior can or will help.
    Depends..!
    If you do format and install, then Yes it will.
    If you reinstall OS X, then No it will not.
    Problem is that according to the Disk Utility message, I don't think that you will be able to install either 10.6 or 10.8.
    Those are very good questions. The only bad questions are the ones you have to ask yourself.

  • 'This disk is locked and cannot be written to'

    After transferring music to new PC, when trying to update iPod Mini, keep getting error message:
    "Attempting to copy to the disk "SUSIE'S IPO" failed. The disk is locked and cannot be written to".
    What am I doing wrong?

    Welcome to Apple Discussions!
    First off, make sure everything is updated...
    http://www.apple.com/ipod/download
    http://www.apple.com/itunes/download
    Now see if restoring your iPod helps...
    http://docs.info.apple.com/article.html?artnum=60983
    btabz

  • "iTunes library file is locked" message

    When I try opening iTunes, I get the message:
    "iTunes library file is locked, on a locked disk, or you do not have write permission for this file" message. This is a new thing - I've been using iTunes fine since buying the mac, 18 months ago. Can anybody help?
    Many thanks
    SeanoSean

    Dear M, thanks so much for your advice on my query. It worked briefly when I tried it the first of your two suggested ways, but then the 'file is locked' message came back, so I tried your next suggestion of copying an alias of itunes icon onto the desktop etc. Lo and behold it worked (at least, so far). Now I've just got to find out why my ipod isn't charging from the dock (in fact, it drains it!) So I'll go and put that on the board now...
    A big thanks once again
    seanosean,
    Welcome to Discussions,
    Try the suggestions in my post in this topic:
    http://discussions.apple.com/message.jspa?messageID=34
    16323#3416323
    Hope this helps.
    M
    17' iMac 800 MHz, 768
    MB RAM, 200 GB HD, DL burner   Mac OS X (10.4.8)
      iTunes 7.0.2

  • Windows vista itunes wont install says disk is locked, windows vista itunes wont install says disk is locked, windows vista itunes wont install says disk is locked

    After it downloads and i click the icon it says disk is locked and something about a license I have windows vista and i am the administrator

    Which error are you getting? Are you getting the "locked disk" or the "cannot be found or created"?

  • After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

    After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked?  Any suggestions?

    Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
    sudo chflags 0 /volumes/*
    sudo chmod a+rx /volumes/*
    at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

  • How do I get rid of "Windows No Disk Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c" when firefox starts up ? Does not show a solution!

    How do I get rid of "Windows No Disk Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c" when firefox starts up, I have to hit continue twice to get past this error message. Then all is OK. The solution shown for this thread does not make sense.
    == This happened ==
    Every time Firefox opened
    == Firefox was updated

    In Google, search for ""Windows No Disk Exception Processing" (including quotation marks). Lots of different answers out there.
    632 results on this search limited to the last year:
    https://encrypted.google.com/advanced_search?q=%22Windows+No+Disk+Exception+Processing%22&hl=en&lr=&tbs=qdr:y&prmd=df

  • I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • This disk is locked

    I need install Mac OS X Lion my Mac Pro, but error like "This Disk Is locked" please hel me

    Same problem on a 2009 MacBook. First it was overheating (at about 14 min) stoping and restarting installation in various times before completition, then I followed the instructions to create a boot drive to install Mountain Lion but when trying to install from there it reports that the disc is locked. I just spend a day trying and trying to figure out what to do.
    Apple I'm very dissapointed!

  • I am unable to erase hard drive after a crash, also cannot reinstall Lion because disk is locked.  There seems to be nothing else to do, suggestions?  Where do I go from here?

    I downloaded Lion 100 days ago (conveniently after the 90 day tech support)  now my HDD has crashed and it gets stuck at the apple screen.  I then hold command R and go to disc utility try to repair, that doesn't work, and try to erase.  But it says error, cannot unmount disk.  I then try to reload Lion, but it says the disk is locked.  Okay, so do I need a new hard drive?  If so that's fine, I just cannot seem to erase this drive to reinstall lion.  Also, I don't have a disk to reinstall OSx, as Lion is done via internet. 

    Wow, thanks.  It did the trick.  So now I am confused, do you think I still need to take in my Mac to see if there are some problems with the hard drive, or do you think I'm in the clear.  I was going to get a new hard drive installed, because I thought that was the issue seeing as I couldn't access it during safe mode. 

  • Stuck in Lion installation *LIMBO* - disk damaged, disk wont repair, disk is locked, wont revert back to snow leopard

    I'm stuck in Limbo.  I cant complete the install and cant revert back to snow leopard.  All I have are the installer utilites (including safari).
    I'm running a summer 2009 release macbook pro 17 inch.  I downloaded the Lion install app and proceeded to follow the instructions and guided.  After less than a minute the install stopped to say that it could not be completed because the hard disk is damaged and can’t be repaired.
    So...I went to disc utility to verify the disk and this is what I got. 
    Verifying volume “Macintosh HD”
    Checking file systemPerforming live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Incorrect number of file hard links
    Bad hard link creation date
    (It should be 3325742596 instead of 3340504404)
    Hard link record has data extents (id = 2888169)
    Checking multi-linked files.
    The volume Macintosh HD could not be verified completely.
    Error: This disk needs to be repaired. Click Repair Disk.
    So I put in my Snow Leopard disk and went to repair disk.  Now, THIS is what I got.
    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    So then I wanted to go back to Snow Leopard at least, but I cant.  When I go to “Startup Disk” and select my Mac 10.6.8 drive, it says:
    You can’t change the startup disk from the selected disk. 
    Startup Disk could not gather enough information on Selected Disk.
    So that’s annoying because it keeps me stuck in that installation "limbo" - not able to finish installing and not able to go back. 
    I restarted, holding down the OPTION key, but it only gave me one boot selection - the installer itself. 
    So then I try yet again to install this thing because there’s not much else I can do...but now it won’t even start installing...when the installer screen asks which drive I want to install it on, for which I would of course choose my Macintosh HD, it says in subscript underneath Macintosh HD:
    “This disk is locked”  and it wont let me select the “continue” button to begin the installation.
    Please help, someone.  

    phew, just got everything back to "normal"
    I turned off my mac for about 10 minutes and then started it up again.  Also I think this time i inserted my snow leopard disc at just the right time, not too early not too late.
    Whatever it was, when i went to "Startup Disk" the snow leopard disc showed up!
    So then I went to disk utility after booting the snow leopard installer for the first time.  It said it repaired one thing but then stopped and said it couldnt repair it and told me to back up and reformat.
    Then I just ran a simple verify again and it said the HD was "OK" - it gave me a clean bill of health?!?!
    So then I went to startup disk again, and was finally able to get out of limbo and back to good old snow leopard.
    Now I'll install Lion, but taking all cautions beforehand...maybe i'll wait a few days first though.
    Thanks to everyone.

Maybe you are looking for

  • Opening pdf in AIR HTML browser developed using Flex

    Hi, I am trying to open a PDF in AIR Browser. The Air browser supports this only if i have installed the Acrobat reader 8.1 and above, for versions lower than 8.1 it is not supporting and not opening the PDF file. In another scenerio I have installed

  • Xml parsing innovation

    [ANN] VTD-XML Version 1.5 Released Eight years after the invention of XML, DOM and SAX, despite their respective issues, are still the mainstays of application developers. So is it the end of road for XML parsing innovation? The VTD-XML project team

  • Bleeping/Glitches when playing music in iTunes

    Hi, Just the last couple of days i have noticed when i am playing music from iTunes on my 15" Mid 2010 Macbook Pro, I am getting intermittent digital noises like bleeping and weird audio glitches. It is almost like an 8 bit type song which are so pop

  • How does Apple identify the MB Air?

    Here is something I can't figure out. I was checking today on the Apple Recycle program where I could turn in my MB Air, first version, and get credit to use in purchase of a newer one. So I go through the steps until the last one when I get a list o

  • How to use SearchService WSDL of IPM in Bpel

    Hi All, I am using Search Service WSDL in my bpel to execute the saved search in IPM, but how do i map my input type variable to the search argument of that Search Service. For eg :- If i need to get the saved search associated with the argument as I