Disk utility - can't restore image - button inactive
Hi,
Can anybody tell me why the restore button in disk utility / restore tab, is inactive? Even after choosing the source image it stays that way. It's a USB flash drive that I'm trying to restore on. Any help would be great! Thanks!
Okay, found it. You have to drag the drive onto the lower field. That should do the trick.
Similar Messages
-
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode. -
Can Disk Utility make a "New Image" from a desktop copy of a DVD?
I have not been able to get Disk Utility to make "new images" of a couple of DVDs. For one of the DVDs, it may have something to do with a hyphen in the title. I haven't a clue why I'm failing with the second of the two DVDs. (Previously, I've had no trouble with about a dozen DVDs so far.)
Several members of this discussion group recommended me to copy&paste or drag&drop the files from a DVD to a new folder (say on the desktop), and then to drag the resulting new folder into the box in Disk Utility, and then to make a disk image using Disk Utility.
(Note: While I believe the original DVDs are not encrypted, I ran an experiment to make double sure, by using MacTheRipper first to produce folders containing clean files.)
However, when I drag the new folder into the box in Disk Utility, and let go of the mouse button, then the folder does not stay in Disk Utility window, but instead springs back to the desktop.
How can I get Disk Utility to make new images from the new desktop folders?
Note:
As a partially successsful work around:
For one of the two original DVDs - which has only about 3.7GB on it - I can sometimes (only sometimes) succeed in doing without Disk Utility simply by dragging the audio and video files from the new desktop folder onto a blank DVD, and then burning that DVD. However, in an average of about two out of every three attempts so far, my Mac rejects the new disk as unusable during the burn process.
For the other original DVD - which has about 4.36GB on it - the contents of the new desktop folder won't fit onto a blank DVD. It then gets messy - shrinking the files - so I'd like to avoid all of that by getting DIsk Utility to work properly.For the answer, see the following excerpt from my own posting dated 2 May 2006, i.e.:
"I finally found out for myself (from Disk Utility Help) that to make a new image from a file/folder, rather than dragging the folder to the Disk Utility pane, in the top menu bar in Disk Utility you select Images/New/Image from Folder." -
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
*** ??? I need to take out the data from a WD320 that shows this error and then format the WD and put the data into again
THANKS !!!I'm sorry, is there a question here? You seem to know precisely what you need to do…
-
Error disk utility can't repair this disk...disk and restore your backed-up files
I have been working on a project using an external hard disk. I used my Macbook Pro (2010) to create this project and files (about 31 GB). Now I am trying to open the disk on my iMac (2014) and it doesn't show up. I can see the HDD when I use disk utility but get this message when I try to repair/restore the disc:
"error disk utility can't repair this disk...disk and restore your backed-up files"
The funny thing is that the disk works absolutely fine with my Macbook Pro. What am I missing?
Imac :OSX 10.9.4 , 2.7 GHz Intel Core i5, 8 Gb Ram.Nico,
Did you find a way?
This just happened to me too.
https://discussions.apple.com/thread/5981446
-John -
Can I fix a disk with this message?
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
Buy a new Drive. Or two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
If the old drive eventually provides some needed data, and is salvageable, Merry Christmas. -
"Disk Utility can't repair this disk...and restore the backed up files"
Hello, my macbook crashed a few days a go as well and after going to the recovery drive and OX Utilities tried to verify and repair disk it gives me this error "Disk Utility can't repair this disk...and restore the backed up files" is the second time that occurs after replacing the hard drive for a new SSD, i thought my problem was solved and is not. Any Ideas? the only other thing i can think of is the logic board?
Backup your files and arrange for an appointment at an Apple store genius bar for a free evaluation.
Ciao. -
My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?
So, you can't Install OSX to the external?
Or you can't boot from it when you do?
You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story. -
Disk Utility can't repair this disk...disk, and restore your backuped-up file.
Computer got uber slow.
I started to worry.
Now computer won't start.
VERY worried.
Tried to repair disk. Received error message above.
Any help would be greatly appreciated.sulaver wrote:
Computer got uber slow.
I started to worry.
Now computer won't start.
VERY worried.
Tried to repair disk. Received error message above.
Any help would be greatly appreciated.
You can't have received an error message "Disk Utility can't repair this disk...disk, and restore your backuped-up file." since that is pure gobbledegook and isn't even good English.
What may have happened is that
(a) your hard drive has become so full that the operating system can't find any space in which to.... operate.
(b) as macjack says, it has crashed - possibly as a result of (a).
(c) you have been allowing Time Machine to back up to your internal hard drive instead of to a backup disk, which has caused (a) to happen. -
In reference to question the computer gave no warning but lost internet connectivity. I shut down for a while and when returned it would only boot to gray logo screen with spinning gear. Ran disk utility and on Mac HD drive it stopped after "Updating boot support partitions as required". Then in red: Error: Disk utility can' repair this disk ....disk, and restore backed up files. I'm running OS X 10.8 and had just updated the iOS about three days ago. Not familiar with reformat process on MacBook Pro and would like some ideas whether I should go to the Genius Bar here in Sydney or try it on my own. I have been using time machine to back up to a 1TB La Cie drive right up to the crash. Thanks for any advice.
Well it turned out the drive was shot. Took it to the genius bar yesterday and they ran a test on the drive before trying the restore routine again. Drive failed.
Replaced the drive and got the MBP back today. Pretty quick and decent service once you get an appointment.
Now having trouble figuring how to do the Time Machine saved files. Have several applications which I'd like to keep but not sure how to trans the apps from my backup to the new. Hunting for answers on that on the web.
Thanks for you help, Eustace. -
Mac started hanging up while streamlining a kids show. Restarted and got the screen with the apple and the circle. restarted with control-option p and r. Ran disk repairitem got the following results;
invalid index key,
it rebuilds catalog b-tree,
volume repair complete,
updating boot support partitions for the volume as required,
Error disk utility can't repair disk
I'm then prompted to back up all files, reformat the disk and restore backed up files.
Obviously need help here as I think I'm in danger of losing my files, photos etc if I don't do this right.
Can anyone help
SteveYou might want to back up the disk as soon as possible, do the repair, then back it up again. First time will have the issues that Disk Utility can't fix, however, you'll have the data saved. Then, once you get things repaired, make a new backup, and go from there.
If you're going to use a hard drive directly connected to your iMac for backup, this is what I mentioned earlier: http://twelvesouth.com/products/backpack/ Great way to use space behind the iMac without adding something else to the desk top. You can buy it through Apple online/stores or Amazon, and there are probably other sources too.
For external hard drives, I like those sold by OWC at http://eshop.macsales.com/shop/firewire/ as many of them use Oxford chip sets, wihch work well with macs (I've used several for years with no issues). Most pre-packaged drive/cases have a 3 year warranty, although you can buy a case and add your own hard drive. I like Western Digital Scorpio Blacks that have a 5 year warranty. -
Hi guys,
My macbook pro late(dec) 2011, doesn't boot up anymore, it just turns off after the chime (whilst a gray bar is loading a bit and then the MB shuts off)...
This all happened after I upgraded to mavericks, safari and chrome were spontaneously shutting off, my macbook kept restarting (all after recommended app store updates), it had kernel panics etc. Last night after an update it just wouldn't boot up anymore! Pff.. what should i do?
Disk utility can't repair the damaged HD, it had something to do with volume headers..
I basically want to access my macbook's files and documents so that i can transfer them onto an external hd or back them up.. i just want my files afterwards i can reformat or whatever as long as i get the files and contents of my hd back..
Ive read of diskwarrior? Can i burn that on a dvd and insert it into my mac, then start my mac and then it allows me to drag and drop all the contents of my hd onto an external hd?
I need a genius to help me!! A step by step guide would really mean the world to me!!
Thanks in advance mysterious genius!!!Step 4(a) open Disk Utility from Utilities on the menu bar, then proceed to highlight the external drive in the left sidebar as you say and choosing Partition from the row of buttons that appear top center in the main window of DU.
5(a) click Restore on the bar of buttons top center of the main DU window, then what you say. But use the name you have given the external drive in step 4, Mac OS X Extended (Journaled) is the way it has been formatted, use a name such as Backup or something obvious to you.
Step 7, On the menu bar, click File, then New Finder Window. In the left sidebar you will see Devices and the internal and external drives will be listed. Click the name of the external drive and then in the main part of the window you should see the contents of the external drive. You can click on the folder for Users, then your user name, and see what folders appear...make sure the folders such as Documents, Pictures and whatever else you use appear and have the content you expect to be there.
You want to be sure all the content has been copied over since the step of erasing the internal drive is going to permanently remove it from that drive.
And then after step 8, add step 9, from Utilities on the menu bar, choose Install Mac OS X, and if it asks where to install, choose the internal, Macintosh HD, as where to install. -
External Hard Drive Disk Utility Can't Repair the Disk
Hi,
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
Thanks
I have a Macbook PRO late 2011 running OS X Mavericks.Use a more powerful utility such as DiskWarrior, or a product such as those listed here.
(108710) -
Disk Utility can't repair TM backup disk
Hello all
Recently, my external backup disk (a 750 GB WD My Passport) that I use with Time Machine has been acting up. At first, it wouldn't show up on the desktop, but was being recognized in Disk Utility (with the "Time Machine Backup" partition greyed out). After multiple restarts and unplugging/replugging the hard drive, I finally got to be properly recognized, i.e. it showed up on the desktop with the proper Time Machine hard drive icon. So I thought the problem was gone and started a routine backup. However, Time Machine returned an error:
"Unable to complete backup. An error occurred while creating the backup folder."
I search the forums, and followed the advice here: http://web.me.com/pondini/Time_Machine/C10.html
I tried repairing the disk, but DU couldn't repair it:
Verify and Repair volume “Time Machine Backups”
Checking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking multi-linked directories.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 3991498 instead of 3904049)
Invalid volume directory count
(It should be 678218 instead of 673790)
Invalid volume free block count
(It should be 9588404 instead of 11784378)
Volume header needs minor repair
The volume Time Machine Backups was found corrupt and needs to be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
So now I'm still following the advice on the above mentioned page by posting on here. Any help at all would be greatly appreciated. I am using a 2010 15in 2.66 i7 MBP, if that makes a difference, although my guess is the problem's with the harddrive itself. I think there may have been one time about a month ago when Time Machine stopped responding (or something like that) which forced me to pull out the harddrive, possibly corrupting the data. But I'm not sure, and I do recall making at least one successful backup after that. Well, actually TM confirms this: "Latest successful backup: 5/27/11 at 11:51 PM". So I have no idea what's going on. Again, any help would be appreciated.You can't tell what's corrupted or where. Time Machine backups have a very complex structure, all linked together. So, you can often do new backups, or restore individual items, or even entire backups, as long as you don't stumble over the damage.
There's a chance a heavy-duty 3rd-party disk repair app, such as Disk Warrior, can repair them. It's about $100, and probably a good investment for the future, but there's no guarantee it can fix them.
If not, or if you don't want to spend the money, your only option is to erase the disk and let Time Machine start fresh.
It sounds like you may have other data on it; if that's in the same partition, that's not a good idea. This is a good time to copy the data off, erase the disk, and make 2 (or more) partitions on it, so Time Machine has its own, exclusive space. See #3 in Time Machine - Frequently Asked Questions for details and instructions. -
Disk utility can't repair a partition on external hard drive
I have a 1TB Western Digital external FW drive that's only a couple years old (2 or 3, probably). I have it split into partitions, one of which I'm using for Time Machine. The non-Time Machine partition checked out fine with DIsk Utility, but when I ran Disk Utility on the Time Machine partition, I received this message:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing? I erased the Time Machine partition and recreated it through Disk Utility, and then I verified it. Everything checked out okay, but I want to make sure, especially since I'm hosting my iTunes music in the other partition (it's backed up to a 2nd external drive, so if the drive does die, at least I don't lose everything).
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off. I unplugged the drive and plugged it back in again a couple times, but nothing happened. Finally, the light went back on after plugging it back in for the 3rd or 4th time, but I'm wondering if the drive could be going bad, which would surprise me since it isn't very old.Brad Cook wrote:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing?
Possibly, but not necessarily. The File System on the disk was so badly corrupted that Disk Utility couldn't fix it. That might indicate a problem with the drive. It's not unusual for consumer-quality (ie, inexpensive) drives to fail after 2-3 years, although many will run for several years. It's a bit of a crapshoot.
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off.
Whatever caused that is another good possibility -- if a drive is improperly disconnected, OSX can't "close it out" properly, and that can cause damage to the file system. Sometimes Disk Utility can fix it, sometimes it can't. And sometimes heavy-duty 3rd-party disk repair apps like DiskWarrior can fix things Disk Utility can't.
A power dip or spike could have caused it, or an overheated electronic component, etc. If it has it's own power supply, be sure it's on a good (ie, not cheap) surge protector or U.P.S. system.
Otherwise, keep an eye on it. If you don't have "secondary" backups, this would be an excellent time to get another drive for that purpose. See #27 in Time Machine - Frequently Asked Questions for some suggestions.
Bottom line: personally, I'd not trust my only backups to that drive.
(But then, I'd never trust my backups to any single drive, no matter how new or high-quality.)
Maybe you are looking for
-
Flashing Question Mark in Folder at Startup - Retrieving Lost Data on HD
I've had my macbook for 9 months and Thursday it started making a clicking noise. I remember accidentally opening iMovie, then all my applications slowed down. The rainbow wheel wouldn't go away and everything froze (clicking noise continued). So I s
-
How to override iMac password?
how to override iMac password?
-
Getting error whils trying to apply leave " hrtim00rec077 "
Hi All, Getting error message no:hrtim00rec077 while trying to apply leave. There is no quota mapped to this absence type but getting the message "Absence quota 01 not found for grouping 1/41 on 20100401" Kindly let me know what might be the reason f
-
We need custom printing for Hyperion planning forms. We are using Oracle® Hyperion Planning, Fusion Edition - 11.1.2.2.. Can anyone guide?
-
Did Mavericks remove ability to drag files and apps between desktops?
I recently upgraded to Mavericks and am trying to drag files and apps between desktops without the use of Mission Control. I used to be able to drag something to the edge of the screen, hold it for a split second and have it move over to that screen.