Disk utilization 100% for very long time - ntoskrnl.exe

I have HP ProBook 4530s running Windows 8.1 Pro x64. Until recently it worked without any problem but since last week disk utilization has been constantly 100% immediately after laptop has been turned on and I have logged on with my domain user account (this
morning 100% disk utilization lasted for almost half an hour). In task manager ntoskrnl.exe is the one who is killing my hard disk. Is there any official Microsoft solution for this - I definitely want to avoid reinstalling Windows from scratch. I saw on net
this was almost common bug in Windows 8.1 but without any solution working 100%.

In order to diagnose your problem you will need to download and install the below
Install the WPT (Windows Performance Toolkit)
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage (if available), CPU usage, Disk IO.
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry) Please configure yours as per the below snip
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

Similar Messages

Why UPD processes execute report RSM13000 for very long time?

Hi,
When I use sm50 or sm51 to check my CRM system which version is 5.0, I found some UPD processes execute report RSM13000 for very long time. And some DIA processes are executing report SAPMSSY1 for verly long time too. They are occupy lot of processes of system. How does this happen? What's the reason and how to solve it? Thanks for your help!
Many thanks and Best regards,
Long

Please check the configurtion of your system.As per your reply it seems that the work processes are not sufficient in the system.
Hi wait time and response time ,is problem in the system.Either you have a lot of load on the system or you CPU's are over loaded.
Please check the system status from st06 and look for the cpu utilisation /memory utilisation.
SM66 to see the long running online and background jobs.
St03n - look for the workload and wait times for all transactions.
st02-may help in checking the memory paramaetrs.
Hope it will help you in resolving the issue.
Thanks
Amit

APS Collections Refresh Snapshot Thread running for very long

Hi,
Program "APS Collections Refresh Snapshot Thread" for "BOM_INV_COMPS_SN" snapshot is running for very long time.
Can we cancel it?
It's running in FAST refresh mode.
Thanks.

Hi,
Count the records in the mlog tables of these MVs. If the record count is more than do a complete refresh.
Thanks,
Abhishek Sharma

Should I leave it plugged in for a long time?

Sorry to start another thread about battery questions, but this is another question I have. I just drained by battery today and it's on the charger right now at 90% charging after 5 hours. Problem is I am going to sleep soon, should I wait til it charges til 100% and disconnect or leave it in and charge throughout the night even though it's going to stay at 100% for the next 9 hours? I guess the gneral question is: is it bad to leave the phone on plug even if it's at 100% for a long time?

No problem.....Good night!

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Hyperlinks (a href) have been outdated for a very long time

I have felt that "a href" hyprlinks have been outdated for a very long time.
so much so that they should no longer be known to most developers (like frames and html based hyperlink maps)
the only thing they can do is cause a new page to load.
The event which causes this has to be a click (on an image, string of text or other compatable html object).
and the event itself has to be the loading of a new page.
by comparason by using javascript you can use ANY html attribute (Onclick, OnMouseover, OnMouseout ect) to trigger to event
or you can use ANY event listener to trigger the event.
You could also set these to only trigger under specific circumstances. (for example an onclick event followed by a mouse over at least 3 seconds later)
and the event which occurs can be anything
it could be a simple page change
or it could bea page change with a modificaton (such as a preloader displaying to hide the fact that the new page is loading)
or it could be a page change, or an animation, or anything else you can think of determined by an IF statemen
furthermore by using AJAX or JQUERY you can have an event which alters a database or SQL file or, in simple cases plain text file based on the users actions - and then determines the action it performs based on the content of the database or SQL file or text file
This coveres everything from very simple actions
to very complex dynamic actions which have an infininte range of possibilites
so
why are is a href still used?

I don't think any serious web developer can afford to make sweeping assumptions like this. Anchor tags are stable and 100% reliable on all platforms & web devices. It might surprise you to know that many people disable client-side scripts for security reasons. How will these people interact with your site?
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Nancy O.

Disk Utility has been trying to make a partition on hard drive for a long time

Disk Utility has been trying to make a partition on hard drive for a long time, I want to make 2nd partition and install the Snow Leopard on 2nd disk,
Lion is very slow on my Early 2011 MBP.

I am using MBP early 2011 with Osx Lion,
Lion was slow for me and I have no external HD to backup my files,
Than I want to make 2 partititon of my internal HD to backup my files to it, and also want to install Snow Leopard to that new partition using the CDs comes with my MBP.
After that.
I was using Disk Utility to partition my MBP to install Snow Leopard to my second part. While partitioning my Disk Utility did not complete and wouldn't continue the process, I waited about 30 minutes to see if it fix itself, so I cancelled it and restart the Mac, upon rebooting I opened Disk Utility to try again and I noticed I lost 400 gigabytes of space. I tried to "Erasing Free Space" but after a couple of minutes it finished and the same problem 400 GBs of lost space.
Is there a way to fix this and regain my lost hard drive space?

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

I have an old ipod that i have not used in a very long time, ive had it on a charger now for over an hour and i still cnnot get my ipod to turn on, how can i fix my problem, i just downloaded the new version of itunes aswell, so i know its not my itunes.

i have an old ipod touch that i have not used in a very long time, and im having trouble gettign it to turn on. ive had it on a charger for over an hour now and still nothing hs changed. i just updated my itunes to the current version they haev so i know its not an itunes problem its rather a problem with the old ipod touch itself. im leaving for deployment soon and im trying to get this fixed without having to send it in. If anyone has any ideas on how to get this thing turned on it would be greatly appreciated.

Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD.

Good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiti

good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting

Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time con

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

When we run $CRS_HOME/root.sh scripts-This hangs for a very long time

Hi,
At the time of oracle cluster ware installation, when we run $CRS_HOME/root.sh scripts…
bash-3.00# /export/home/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d1s1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
This hangs for a very long time; I controlled out of it and re-run it. The same result, it stops at the last line for hours now. Any idea?
Thanks
ANup
Edited by: user485641 on २५ अप्रैल, २००९ ७:०५ अपराह्न

what os ? what Oracle version?
What you find on cluster log.... ?

Very long time for 0EC_PCA_3 ectractor

Hello,
We have a problem with 0EC_PCA_3 extractor in delta mode. It takes very long time (4 hours) for a very few records. Is it normal .? How to optimize this ?
Thank you in advance forr your help.
Best regards
Nicolas

Dear Nicolas,
Iu2019m going try to help you regarding your question,
I have searched in help sap, some feature about how get better performance:
I found the following information:
To optimize the performance of data procurement when DataSource 0EC_PCA_3 accesses line item table GLPCA in the OLTP, you should set up an additional secondary index. This should contain the following fields:
1.     u2022         RCLNT
2.     u2022         CPUDT
3.     u2022         CPUTM
For R/3 Releases 4.0B and 4.5B, you have to install note 580273.
More detail in:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5d/ac7d8082a27b438b026495593821b1/frameset.htm
I hope this information can help you,
Luis

Disk utilization 100% for very long time - ntoskrnl.exe

Similar Messages

Maybe you are looking for