Disparate message for Intel mac

Hello friends,
Visiting my install Flash Player again after a while, researching,
deciding I can do this. Noticed that there was a window that
popped up from an install link at Adobe. I have an Intel Mac
but it said that PowerPC was not supported and said to get
the Flash Player for Power PC. (I have been making
screenshots of trying to install the 10.3 again – didn't work,
again – hope to share with you all later.) But here is the one
cropped screenshot of window that popped up. It could be
confusing for the uninitiated. Followed another link to install
10.3 and it installed without this mistaken alert
(said successful install – but doesn't work.)

Len,
Have you tried the Spry Menu Bar?
It's comes with DW CS3, otherwise you can download it from
Adobe Labs
(labs.adobe.com) for free.
HTH,
Randy
> Looking high and low for an easy-to-use menu system for
Dreamweaver on the
> Intel-Mac platform. I'm migrating over from GoLive
(Ain't we all) and cannot
> locate a menu system that does not involve a lot of
coding. I've contacted
> every Dreamweaver plugin creator that I can find and
they all say, "We are
> building a Mac version, check back later". Well - I have
dozens of sites built
> with the pluin from www.menumachine.com and this plugin
worked great - but alas
> - no Dreamweaver version. Anybody know where I can
locate one? And - hopefully
> it doesn't cost $350 but if does . . .

Similar Messages

Open Firmware Password for Intel MAcs

I had used this application and password protection for my G4's. Does it work for Intel Macs?
20" iMac Core Duo 2/ 14 iBook [1 ghz] Mac OS X (10.4.7)

Yes,this support article says that Intel does support open firmware password and gives the steps to set.
-mj
[email protected]
Message was edited by: macjack

Windows media player for intel macs?

im so bumbed that windows media player wont run on intel macs...does anyone know when they plan on getting it for intel macs!..i need it!...Flip4mac *****...the formats that it plays i have not come across yet..and thats even if its working properly...i think im gunna uninstall that actually....Please I need windows media player!!!...anyone know anything about it?

No biggie. Please don't be insulted but you're downloading the MAC version, correct? At Mactopia.com?
a dah..lol..yes...
That being the case if it won't run I'd do the "regular drill": Repair Permissions, download & run Onyx or Cocktail, consider booting from your install DVD and running Disk Repair. If still no joy post back.
not sure what to make of this....i might just wait for the intel version of flip4mac..because im not sure if i should do all that....i dunno im so confused...why cant it just work?....what is onyx and cocktail?.....what is Repair Permissions?....im not exactly a techy so im not to comfortable running the instal DVD..wat if i mess everything up?..isnt there and easier way to get WMP on my macbook pro?...anyone else have problems downloading and using WMP..and found a way to run it?..or am i seriously the only one that does not know what to do....im not trying to be annoying, but some please help me...

OS X update for intel MAC

i have just done the update for intel mac- i can note that all windows have a steel grey finish now- i just wanted to check with others if they have the sasme finish or is it a problem with my mac
also is this the way leopard will look like

huh?? wad are u talking about? i don see any difference in the gui on my side. and besides all finder windows HAVE ALWAYS had the steel gray finish look, including safari..

PlainTextPaste for Intel Mac?

I frequently need to copy many file names into an email. I had been using PlainTextPaste, but that does not run on the Intel Macs. Now, when I select more than one file in the Finder, copy, and paste into an email, the actual files themselves get pasted in, and not the names. Does anyone know of another product like PlainTextPaste for Intel Macs, or is there already a way to get the result I want that I don't know about?
Thanks,
-Tiffany

Create a new document in TextEdit, choose Make Plain Text from the Format menu, paste the list into it, and then copy it from there.
(42931)

Best financial software for Intel Macs

I see to my disgust that Intuit just released a new version of Quicken that is not universal binary. That being the case, what is the best home financial software for Intel Macs?

Hey Todd,
Just to be sure I am understanding you - you are saying you are miffed because Quicken missed the chance to go Universal Binary. That is understandable, but I just wanted to make sure you knew that it still runs on Intel macs.
I am running the newest release on my Macbook and to be honest Quicken just isn't one of those apps that is going to benefit from more speed.
My frustration has always been that Quicken dumbs down the functionality for the Mac version. Still the case with this last release.
That said, Quicken is still the best buy for my money (sorry couldn't resist!) and runs well via on the Intel macs.
The best solution and the one I am moving toward is to load XP on Parallels and run the PC version of Quicken that way.
Best of all worlds I would say.
MacBook Mac OS X (10.4.8)

V10.4.7 for Intel Macs only?

Can anyone confirm for me whether or not there exists a Tiger version 10.4.7 which is only for Intel Macs?

There was also this:
http://www.apple.com/support/downloads/macosxupdate1047combointel.html
This updated an Intel Mac up to 10.4.7. It required that a previous version of 10.4 already be installed.

Shutterfly Export Assistant for Intel Macs

After successfully downloading/installing Shutterfly's Export Assistant plugin for iPhoto 6.0.5 I soon realized that the "Shutterfly" tab was missing from the iPhoto File/Export menu. Searching Apple's Discussions I found posts of Jan '06 that say that Shutterfly currently does not support this plugin for Intel Macs. In fact, one of the posts gave a link to a Shutterfly page (http://www.shutterfly.com/downloads/sys_req.jsp?sw=osx) which unfortunately states, "Note: New Macintosh computers using an Intel processor are not yet supported." Bummer. I sent email to Shutterfly requesting when their plugin will work. In the meanwhile, does anyone have current informtion that can be shared on this topic? Thanks!

Here is the response from Shutterfly on how to get their Shutterfly Export Assistant for iPhoto on Intel Macs to work. I personally haven't had time to try this yet but plan to soon.
"Thank you for contacting Shutterfly.
We are sorry to hear that you have been having difficulties in using your plugin.We have heard from a few Mac customers that there are problems using the iPhoto plug-in on computers set up with multiple users. You can certainly try to use the plug-in, but be aware that it may only function for the main (root) user on the Mac by default.
To fix this, you need to go to the iphoto icon in applications, apple/click get info. go to the plug-in section, select the Shutterfly plug-in, click ownership and change it to everyone as opposed to a particular user. This will solve the problem.
Also please note that, there are two versions one for Intel Macs and one for Power PC Macs uninstall the one you currently have installed then reboot your computer go back and redownload the upload assistant and make sure you have the correct version for the processor your using. If you still find you are have these issues please give us a call at (800) 986-1065 and ask to be transferred to technical escalation so we can help you further. For instructions on removing the plugin click the link below.
Title: Removing Mac Picture Upload Assistant (Browser Plugin)
URL: http://crmweb.shutterfly.com/cgi-bin/helpfly.cfg/php/enduser/stdadp.php?p_faqid=582&pcreated=1128469962
Please let us know if we can offer any additional information."

Need an audio routing utility for intel mac

hi
i would like to know if there is a utility for intel macs which will allow me to specify which audio output is used by specific applications. to be more specific i would like itunes, DVD player, Eye TV applications output to go via the digital output on my Mac Pro which is linked to my Hifi, and everything else (system sound effects, iChat, etc) to go via the analog output which is linked to small PC speakers.
I am aware of the 'Detour' plugin, which sadly doesn't work on intel Macs, and basically am looking for a similar application for intel Macs
thanks
nick

I might have an answer. After trying every audio routing program I could find, I poked around in Nicecast. I found a deeply buried menu for an output choice of default or 1/2. It was on default so I chose 1 for left and 2 for right and this accomplished what I need. Until I quit the programs. Then I was back to square 1. I disabled Detour and tried a currently supported program, Jack. jack would not even load the currently running programs to be able to route them. So I went back to Detour and had to add Nicecast to it's list. All is well, I hope
In fact I tried another application at the same time and Detour did what it was supposed to, so it looks like my problem might have been with Nicecast all along, but I set the output back to default and it still worked. Maybe after some updates I just need to reset all the preferences? But Detour has not been supported since 2005 and Jack seems useless.
Tracy

Shutterfly iPhoto Export Assistant - for INTEL Macs

I have twice followed the directions on the shutterfly site -
http://www.shutterfly.com/downloads/features_mac.jsp
. I have uninstalled and reinstalled the plugin. It appears in my list of plugins and is checked when I go through the applications folder and get info on iPhoto. Still, when I select photos and click on export NOTHING happens - no tabs, no nothing. Suggestions?
Machine Name: MacBook Pro 17"
Machine Model: MacBookPro1,2
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B03
SMC Version: 1.5f10
Serial Number: W86291NTTHY
Sudden Motion Sensor:
State: Enabled

I just got off the phone with Shutterfly tier 2 support and was told that the current Export Assistant for Intel Macs will not work with OS X version 10.4.8.
It seems to me that since 10.4.8 has been out way before the Intel compatible iPhoto Export Assistant for Shutterfly they might have tested it with the latest version of OS X. Also, there is no mention of compatability issues on the Shutterfly "Free Software" page, even though they are aware of the issue.
Additionally, the Shutterfly support pages only suggest uninstalling and reinstalling the plug-in, again with no mention of the fact that it does not work with the current version of OS X. Nice!

ReWire functionality for Intel Macs?

Has anyone heard when LE will add ReWire functionality for Intel Macs? I find it odd that Garageband's ReWire works fine, but LE Express doesn't. That feature was recently added to Logic Pro in the 7.2.1 update. Any word about when us Express users will be able to enjoy the same?

Hi T,
http://www.apple.com/support/downloads/logicexpressupdate721.html
cheers,
Jorge

PSP Vintage Warmer released Universal Binary for Intel Macs

For those that care, PSP just released their UB version for Intel Macs. Many of us have been waiting for this and I just downloaded a demo version of this to play with. Supposed to be one of the better multiband compressor type of plug ins out there.

Just use Debowelerificator version 1.78.
It sounds much better,and has NO latency,if you use the Triturator presets.
Cheers

Final Cut Pro 4 for Intel Mac

I have FCP 4.0 on an older Mac. I recently purchased a new intel Mac Pro. I'm trying to install FCP 4.0 on my new intel Mac Pro but it will not install. I get an error message about not being compatible with intel. Does anyone know if there is an upload to correct this problem? I don't have the extra money to buy the software again.
Thanks for your help,
Michelle

According to the Apple website: [http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearn More=MA886Z/A]
Upgrade Eligibility
The upgrade version requires a valid serial number from a commercial version of
Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic
and not-for-resale versions are not eligible for this upgrade.
Elsewhere on the page:
Buy New $1,299.00
Upgrade from Final Cut Studio* $499.00
Upgrade from Final Cut Pro or Production Suite* $699.00
Not bad, considering what you get in FCS: DVD studio Pro, Motion, Soundtrack Pro, Color etc...
If money is really tight, and all you want to do is edit, look into Final Cut Express HD @ $199 - includes Livetype and supports FXPlug 3rd party plugins, but that's about all (unless AVCHD means anything to you).
You can always use iDVD for your DVDs.
j0nn0

No temperature monitors for Intel Macs?

I found the below in the FAQ for the application 'Temperature Monitor' and thought it might helpful to understand why we don't have a temperature monitoring application, or perhaps never will. SInce we do have the speedit.kext way to read CPU temperature, perhaps at least that is possible to implement in a standalone application.
Q: I am using the latest release of the application which should support my computer, but still no sensor at all, or only a S.M.A.R.T. hard drive temperature sensor is found. Is this normal?
A: Unfortunately there are some specific Macintosh systems which don't allow that sensor values can be read out by a normal application program. There are two different cases:
The computer uses a self-contained cooling control system. The hardware itself controls its own monitoring. No transfer of data from the sensor to the operating system is possible because there is no bus connection between the sensor and the actual computer.
The computer contains sensors accessible via a data bus, but cooling control is independent of Mac OS X. Apple does not provide any device drivers which would allow application programs to get data from the sensor. Only the firmware or a closed part of the operating system core has access to sensor data.
In both cases, it is not possible to develop an application program which could read out sensor values. The following Macintosh systems are affected by this problem:
PowerBook G4 Titanium (all models)
eMac (all models)
iMac G4 (all models)
Mac mini (all models)
Note that Intel-based Macintosh systems use a special mix of the mentioned monitoring techniques: Mac OS X only uses the load sensor of the graphics chip for thermal management. This sensor can be displayed by Hardware Monitor without any problems, it is however not displayed by Temperature Monitor, because this sensor does not measure temperature.
All other sensors in Intel Macs are controlled by special hardware working independently of the operating system, the Apple System Management Controller. This device has not been disclosed by Apple. There are neither drivers for Mac OS X, nor any documentation, and all details related to the function of this chip have been "censored" by Apple in the source code of Darwin. For this reason it is currently impossible that any application program could get readings from this chip.

"Mac OS X only uses the load sensor of the graphics chip for thermal management"
Yes and no. But, this doesn't really seem to be the case! If this is true, simply running Quake4 SHOULD cause the fans to kick on as the GPU is being heavily used. This did not happen on my machine. Only after reapplying the thermal paste would both fans kick in during heavy use. My guess is that it is actually a mix of conditions that cause the fans to operate at different levels. Heat pipe temp + GPU load + ...
I think one variable that is not being used is processor temp. I can't really understand why not though because that would go a long way to alleviating some of our heat problems and the fans would operate in a semi-normal fashion even if the processor/heat pipe connection is suboptimal.
Message was edited by: Daffy_Duck

How can I tell if I have the right restore disks for Intel Mac Mini

I have an "early 2006" (confirmed by S/N YM609***) Intel Mac Mini 1.66mhz Core Duo. I bought it used and the hard drive had been wiped. Both the HD and the DVD drive seem to work fine; hard drive passes SMART tests. I was able to boot using "Drive Genius" and can access the pre-install items like Disk Utility (and know that I need to use GUID formatting to create a bootable disk). Not knowing I could order restore disks from Apple I bought a set on eBay, p/n AHT VERSION 3A102 DISC VERSION 1.1 2Z691-5828-A, copyright 2006 on disks and included documentation (OS 10.4.6), but the install always fails 10-15 minutes along. I got the same results when trying to install via internal optical drive to a FW or USB external HD (told it to use GUID for the external HD), or external FW optical drive both to internal HD and to external USB hard drive. A friend tried to install full retail versions of 10.5 and even 10.6 for diagnostic purposes, using the built in HD and DVD drives, but those installs did not complete either; they did not try external drives. Is that the wrong restore version for this model, or even if the right "generation", does a set of restore disks only work with the specific Mac mini they were issued for like for example XP restore disks would? I've been told I can provide my s/n to Apple and for about $30 they will send me the "right" restore disks... anyone know anything about this? Could there be a hardware/firmware explanation for why the install fails like that? PS ran the extended version of the Apple Hardware Test with that restore disk set and it reported "no problems."
<Edited by Host>

Thanks. Actually I got the Mini from a computer recycling company I work with so I knew it might have problems and that I was taking an "as-is" risk. If the original disks were turned in with it, they'd been lost (that outfit took in huge piles of stuff every day; it was often luck of the draw for me to find something before it would be buried, damaged, etc., and not everyone who worked there had any idea of the possible value of things they received) for me to find things. The disks I got on eBay apparently were separated from the mini they'd been packaged for. An Apple Store rep said I could order restore direct from Apple just by providing my serial number; just wish I'd known that before I went to eBay. Since posting this I've seen another seller specifically claiming that the same-part-numbered-as-mine disc set they are selling will work with my specific type of Mac mini. I have an appointment tomorrow morning at the Genius Bar at an Apple store near me in case they have more suggestions. Will share what I know as things develop.

Disparate message for Intel mac

Similar Messages

Maybe you are looking for