Dispatcher services in Running state with Yellow status
Dear Team
Kindly advise on issue where we are facing an issue on SAP SAP NetWeaver 7.0 Application server. When we are bringing up the services through windows batch file then it is not coming up sucessfully and in hang stage due to which messages are not posted.
Advise
Regards
Machindra Patade
Thanks Manoj
But We have checked the DB and listner status which is started but still we are facing the issue while down-up the App services as it goes to yellow status.
Kindly advise what will be the reason behind the same and alternate solution on the same.
Regards
Machindra Patade
Similar Messages
-
My BDOCs in CRM are all waiting with yellow status
I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Message was edited by: Prakash Singhhi Prakash,
again oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction ?
bwa5 and bwa7, delta is activated ?
and initialization performed in bw ?
626214 619122
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly. -
Changed IBM As/400 system from V4R5 to V5R2 and now get this message when using Access to link to external database the same exact settings on everything I can determine on all computers.
IBM Client Access ODBC Driver DB2/400 SQL7017 Unable to run statement with specified commit level #-7017
I have Commit immediate = *NONE in the Advanced Server Options in ODBC Data Source Administrator. It shows the AS/400 files in the Link Tables list and allows me to add it to the Access table objects, but when I try to open it in datasheet view I get that
error.
What am I missing?Ouch. That's a lot of paste...
INFO: PATH = C:\oracle\product\10.2.0\client_2;C:\oracle\product\10.2.0
\client_1;T:\SDCHS20N440\Oracle\agent10g\jlib;T:\SDCHS20N440
\Oracle\agent10g\bin
INFO: The flags set for this home (T:\SDCHS20N440\Oracle\agent10g) are:clean
SEVERE: Abnormal program termination. An internal error has occured. Please
provide the following files to Oracle Support : I wonder how "T:" is involved. Looks like you got a management agent on a network drive. If so, is this Home registered with the oraInventory on your machine? Can you try the same install on a machine without any previous Oracle software installed? -
My BDOCs(transaction smw01) are all waiting with yellow status
I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Hi Kaushal,
I am also facing the similar problem as Prakash, I don't know why my Bdocs are all waiting with yellow status in smw01.I followed your steps but in SMOHQUEUE the status of the queue demon is Hold because of this the status of Bdocs are yellow.If yes would you pls tell me the steps to turn it to green.If i manually do(Reprocess or register that queue in smqr) everything is working fine but is there any way we can turn Bdocs from yellow to green automatically.I appreciate it in advance. If you find any doc. pls fwd it to [email protected]
Thanks a lot
With Regards
Nagamani. -
T500 Unattended Wake from Standby - Windows Image Acquisition Service entered running state
I haven't been able to figure out what is waking up my computer while I am away.. After I standby or hibernate then come back the next day, it is always running again.
I'm running XPsp3 on my T500 in a home network environment.
Tonight I stayed up with it, and it woke up at around 1:59. I see in the System Event Viewer this event was logged, "The Windows Image Acquisition Service entered the running state".
What is causing this service to start and wake up the computer?
Since this is imaging related, I mention one other thing that I have noticed, that occasionally on startup the built in webcam light will stay on, only going off when I start it and stop it again.
Message Edited by willy2 on 08-03-2009 11:13 PMIf you are running XP MCE (Media Center Edition), it's likely that there is a scheduled MCE task that is waking your system every night. When I was running MCE on my former desktop, the system came out of hibernation (as well as standby) in the wee hours every morning. As I recall disabling the ehrecvr process prevented the behavior (though this has other affects on MCE); there may be a way in XP's task scheduler to find the MCE task and change it to not run if the system is in standby (I'm a little fuzzy on that since I later switched to Vista MCE, and the task is visible there).
Searching on 'MCE wakes up computer from standby' in Google will show lots of similar complaints. -
1.5 sometimes freezes when running statements with F9
I had noticed occasional freezes when hitting F9 with 1.5.0 production (ie three or four times last week), but after upgrading to 1.5.1 today (fresh install, migrated preferences) I have had four or five freezes when hitting F9. The UI completely freezes before showing the progress bar and there is no redraw, but it isn't using any CPU (and CPU is 95%+ idle), nothing appears on the console (started using <SQL Dev Install>\sqldeveloper\bin\sqldeveloper.exe) and if I leave it long enough the memory usage drops from 150K+ to back between 1K to 4K (sometimes quickly, sometimes not).
I am on Win XP SP 2, using SQL Developer 1.5.1.54.40 with JDK 1.6.0_04.
Initially, I upgraded to 1.5.1 from 1.5.0 as a Check for Updates, but tried the clean install (including renaming preferences directory) after the first freeze.
Has anyone else seen this? Can someone from the SQL Dev team provide any help? Is there something else I can do to help narrow this down?
theFurryOneSame thing in very similar circumstances - query with bind variables previously executed, freezes on execute without showing bind variable window. Using no appreciable CPU in this state, but after a minute or so memory usage started to increase in 4 or 8K chunks.
I've also been seeing this intermittently in all builds of 1.5.
About
Oracle SQL Developer 1.5.0.53
Version 1.5.0.53
Build MAIN-53.38
Copyright © 2005,2008 Oracle. All Rights Reserved.
IDE Version: 11.1.1.0.22.49.35
Product ID: oracle.sqldeveloper
Product Version: 11.1.1.53.38
Version
Component Version
========= =======
CVS Version (External) (CVSNT) 2.0.51d (client/server)
Java(TM) Platform 1.5.0_06
Oracle IDE 1.5.0.53.38
Versioning Support 1.5.0.53.38
Properties
Name Value
==== =====
apple.laf.useScreenMenuBar true
awt.toolkit sun.awt.windows.WToolkit
class.load.environment oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level CONFIG
class.transfer delegate
com.apple.macos.smallTabs true
com.apple.mrj.application.apple.menu.about.name "SQL_Developer"
com.apple.mrj.application.growbox.intrudes false
file.encoding Cp1252
file.encoding.pkg sun.io
file.separator \
ice.browser.forcegc false
ice.pilots.html4.ignoreNonGenericFonts true
ice.pilots.html4.tileOptThreshold 0
ide.AssertTracingDisabled true
ide.bootstrap.start 965447299307
ide.build MAIN-53.38
ide.conf D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild false
ide.devbuild false
ide.extension.search.path sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun false
ide.java.minversion 1.5.0
ide.launcherProcessId 3336
ide.main.class oracle.ide.boot.IdeLauncher
ide.patches.dir ide/lib/patches
ide.pref.dir C:\Documents and Settings\macmilp\Application Data\SQL Developer
ide.pref.dir.base C:\Documents and Settings\macmilp\Application Data
ide.product oracle.sqldeveloper
ide.shell.enableFileTypeAssociation D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.exe
ide.splash.screen splash.gif
ide.startingArg0 D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin\sqldeveloper.exe
ide.startingcwd D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin
ide.user.dir C:\Documents and Settings\macmilp\Application Data\SQL Developer
ide.user.dir.var IDE_USER_DIR
ide.work.dir U:\\SQL Developer
ide.work.dir.base U:\
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.awt.printerjob sun.awt.windows.WPrinterJob
java.class.path ..\..\ide\lib\ide-boot.jar;..\..\lib\java\api\jaxb-api.jar;..\..\lib\java\api\jsr173_api.jar;
..\..\j2ee\home\lib\activation.jar;..\..\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;
..\..\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;..\..\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar
java.class.version 49.0
java.endorsed.dirs D:\sun\java\jdk1.5.0_06\jre\lib\endorsed
java.ext.dirs D:\sun\java\jdk1.5.0_06\jre\lib\ext
java.home D:\sun\java\jdk1.5.0_06\jre
java.io.tmpdir C:\Temp\
java.library.path D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin;.;C:\WINDOWS\system32;
C:\WINDOWS;d:\oracle\tools\dev\9_0_2\jdk\jre\bin\classic;d:\oracle\tools\dev\9_0_2\jlib;
D:\oracle\tools\dev\9_0_2\bin;d:\oracle\client\10_2_0_1\bin;
d:\oracle\dbms\xe\10_2_0_1\app\oracle\product\10.2.0\server\bin;d:\merant\pvcs\vm\win32\bin;
d:\merant\pvcs\vm\common\bin\win32;c:\windows\system32;c:\windows;c:\windows\system32\wbem;
d:\cvs\cvsnt\2_0;d:\graphviz\2_12\Graphviz\bin;d:\microsoft\windows\xp\tools;
d:\sun\java\jdk1.5.0_06\bin;d:\ruby\1_8_2\bin;u:\tools\bin;d:\pldoc\0_8_3_1;
d:\graphviz\2_12\graphviz\bin;v:\tools\bin;d:\sun\java\jdk1.5.0_06\bin; d:\pldoc\0_8_3_1;d:\graphviz\2_12\Graphviz\bin;C:\Program Files\CVSNT\
java.naming.factory.initial oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version 1.5.0_06-b05
java.specification.name Java Platform API Specification
java.specification.vendor Sun Microsystems Inc.
java.specification.version 1.5
java.util.logging.config.file logging.conf
java.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
java.version 1.5.0_06
java.vm.info mixed mode
java.vm.name Java HotSpot(TM) Client VM
java.vm.specification.name Java Virtual Machine Specification
java.vm.specification.vendor Sun Microsystems Inc.
java.vm.specification.version 1.0
java.vm.vendor Sun Microsystems Inc.
java.vm.version 1.5.0_06-b05
jdbc.driver.home /D:/oracle/client/10_2_0_1/
jdbc.library /D:/oracle/client/10_2_0_1/jdbc/lib/ojdbc14.jar
line.separator \r\n
oracle.home D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG true
oracle.translated.locales de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version 9.0.4
orai18n.library /D:/oracle/client/10_2_0_1/jlib/orai18n.jar
os.arch x86
os.name Windows XP
os.version 5.1
path.separator ;
reserved_filenames con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sun.arch.data.model 32
sun.boot.class.path D:\sun\java\jdk1.5.0_06\jre\lib\rt.jar;D:\sun\java\jdk1.5.0_06\jre\lib\i18n.jar;
D:\sun\java\jdk1.5.0_06\jre\lib\sunrsasign.jar;D:\sun\java\jdk1.5.0_06\jre\lib\jsse.jar;
D:\sun\java\jdk1.5.0_06\jre\lib\jce.jar;D:\sun\java\jdk1.5.0_06\jre\lib\charsets.jar;D:\sun\java\jdk1.5.0_06\jre\classes
sun.boot.library.path D:\sun\java\jdk1.5.0_06\jre\bin
sun.cpu.endian little
sun.cpu.isalist pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop windows
sun.io.unicode.encoding UnicodeLittle
sun.java2d.ddoffscreen false
sun.jnu.encoding Cp1252
sun.management.compiler HotSpot Client Compiler
sun.os.patch.level Service Pack 2
user.country GB
user.dir D:\oracle\tools\sqldev\1_5_0_53_38\sqldeveloper\sqldeveloper\bin
user.home C:\Documents and Settings\macmilp
user.language en
user.name pmacmillan
user.timezone Europe/London
user.variant
windows.shell.font.languages
Extensions
Name Identifier Version Status
==== ========== ======= ======
Check For Updates oracle.ide.webupdate 11.1.1.0.22.49.35 Loaded
Code Editor oracle.ide.ceditor 11.1.1.0.22.49.35 Loaded
Database Connection Support oracle.jdeveloper.db.connection 11.1.1.0.22.49.35 Loaded
Database Object Explorers oracle.ide.db.explorer 11.1.1.0.22.49.35 Loaded
Database UI oracle.ide.db 11.1.1.0.22.49.35 Loaded
Diff/Merge oracle.ide.diffmerge 11.1.1.0.22.49.35 Loaded
Extended IDE Platform oracle.javacore 11.1.1.0.22.49.35 Loaded
External Tools oracle.ide.externaltools 11.1.1.0.22.49.35 Loaded
Feedback oracle.ide.feedback 11.1.1.0.22.49.35 Loaded
File Support oracle.ide.files 11.1.1.0.22.49.35 Loaded
File System Navigator oracle.sqldeveloper.filenavigator 11.1.1.53.38 Loaded
Help System oracle.ide.help 11.1.1.0.22.49.35 Loaded
History Support oracle.jdeveloper.history 11.1.1.0.22.49.35 Loaded
Import/Export Support oracle.ide.importexport 11.1.1.0.22.49.35 Loaded
Log Window oracle.ide.log 11.1.1.0.22.49.35 Loaded
Mac OS X Adapter oracle.ideimpl.apple 11.1.1.0.22.49.35 Loaded
Navigator oracle.ide.navigator 11.1.1.0.22.49.35 Loaded
Object Gallery oracle.ide.gallery 11.1.1.0.22.49.35 Loaded
Object Viewer oracle.sqldeveloper.oviewer 11.1.1.53.38 Loaded
Oracle IDE oracle.ide 11.1.1.0.22.49.35 Loaded
Oracle Microsoft Access Browser oracle.sqldeveloper.thirdparty.access 11.1.1.53.38 Loaded
Oracle Migration Workbench oracle.sqldeveloper.migration 11.1.1.53.38 Loaded
Oracle Migration Workbench - MS Access oracle.sqldeveloper.migration.msaccess 11.1.1.53.38 Loaded
Oracle Migration Workbench - MySQL oracle.sqldeveloper.migration.mysql5 11.1.1.53.38 Loaded
Oracle Migration Workbench - SQLServer oracle.sqldeveloper.migration.sqlserver2005 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation Core oracle.sqldeveloper.migration.translation.core 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation MS Access oracle.sqldeveloper.migration.translation.msaccess 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation MS SQL Server oracle.sqldeveloper.migration.translation.sqlserver 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation MySQL oracle.sqldeveloper.migration.translation.mysql 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation Sybase oracle.sqldeveloper.migration.translation.sybase 11.1.1.53.38 Loaded
Oracle Migration Workbench - Translation UI oracle.sqldeveloper.migration.translation.gui 11.1.1.53.38 Loaded
Oracle MySQL Browser oracle.sqldeveloper.thirdparty.mysql 11.1.1.53.38 Loaded
Oracle SQL Developer oracle.sqldeveloper 11.1.1.53.38 Loaded
Oracle SQL Developer Extras oracle.sqldeveloper.extras 1.1.1.53.38 Loaded
Oracle SQL Developer Reports oracle.sqldeveloper.report 11.1.1.53.38 Loaded
Oracle SQL Developer SearchBar oracle.sqldeveloper.searchbar 11.1.1.53.38 Loaded
Oracle SQL Developer TimesTen oracle.sqldeveloper.timesten 1.5.0.1.1 Loaded
Oracle SQL Server Browser oracle.sqldeveloper.thirdparty.sqlserver 11.1.1.53.38 Loaded
Oracle Sybase Browser oracle.sqldeveloper.thirdparty.sybase 1.2.1.53.38 Loaded
Oracle XML Schema Support oracle.sqldeveloper.xmlschema 11.1.1.53.38 Loaded
PROBE Debugger oracle.jdeveloper.db.debug.probe 11.1.1.0.22.49.35 Loaded
Peek oracle.ide.peek 1.0 Loaded
Replace With oracle.ide.replace 11.1.1.0.22.49.35 Loaded
Runner oracle.ide.runner 11.1.1.0.22.49.35 Loaded
SQL Worksheet Window oracle.sqldeveloper.sqlworksheet 11.1.1.53.38 Loaded
Search Bar oracle.ide.searchbar 11.1.1.0.0 Loaded
Snippet Window oracle.sqldeveloper.snippet 11.1.1.53.38 Loaded
Sybase 12 oracle.sqldeveloper.migration.sybase12 11.1.1.53.38 Loaded
Sybase 15 oracle.sqldeveloper.migration.sybase15 11.1.1.53.38 Loaded
Tuning oracle.sqldeveloper.tuning 11.1.1.53.38 Loaded
VHV oracle.ide.vhv 11.1.1.0.22.49.35 Loaded
Versioning Support oracle.jdeveloper.vcs 11.1.1.0.22.49.35 Loaded
Versioning Support for CVS oracle.jdeveloper.cvs 11.1.1.0.22.49.35 Loaded
Versioning Support for Subversion oracle.jdeveloper.subversion 11.1.1.0.22.49.35 Loaded
Web Browser and Proxy oracle.ide.webbrowser 11.1.1.0.22.49.35 Loaded
oracle.ide.dependency oracle.ide.dependency 11.1.1.0.22.49.35 Loaded
oracle.ide.indexing oracle.ide.indexing 11.1.1.0.22.49.35 Loaded
Thread dump:
Full thread dump Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode):
"worksheet" prio=6 tid=0x2e5f1cf0 nid=0xcec in Object.wait() [0x30e3f000..0x30e3fce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x033d4858> (a java.awt.EventQueue$1AWTInvocationLock)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.invokeAndWait(EventQueue.java:846)
- locked <0x033d4858> (a java.awt.EventQueue$1AWTInvocationLock)
at javax.swing.SwingUtilities.invokeAndWait(SwingUtilities.java:1257)
at oracle.dbtools.sqlworksheet.sqlview.SqlEditor$2.construct(SqlEditor.java:866)
- locked <0x06b38170> (a oracle.jdbc.driver.T4CConnection)
- locked <0x06b38170> (a oracle.jdbc.driver.T4CConnection)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:595)
"IconOverlayTracker Timer" prio=6 tid=0x2d76ca38 nid=0xb8c in Object.wait() [0x3153f000..0x3153f
9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x06cffe60> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x06cffe60> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"pool-1-thread-1" prio=6 tid=0x2e5bbad8 nid=0x354 waiting on condition [0x3103f000..0x3103fa68]
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:118)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQ
ueuedSynchronizer.java:1767)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:359)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:470)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:674)
at java.lang.Thread.run(Thread.java:595)
"Timer-2" prio=6 tid=0x2e601b18 nid=0xd20 in Object.wait() [0x30d3f000..0x30d3fae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x06abcbd8> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x06abcbd8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TextBufferScavenger" prio=6 tid=0x2e7f2008 nid=0xdc4 in Object.wait() [0x30aaf000..0x30aafd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x068e0780> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x068e0780> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(TextNode.java:1886)
"IconOverlayTracker Timer" prio=6 tid=0x2e801f78 nid=0x700 in Object.wait() [0x2f26f000..0x2f26f
ae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x060a9968> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x060a9968> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"IconOverlayTracker Timer" prio=6 tid=0x2e803d08 nid=0x33c in Object.wait() [0x2f16f000..0x2f16f
b68]
at java.lang.Object.wait(Native Method)
- waiting on <0x060a99e0> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x060a99e0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TimerQueue" daemon prio=6 tid=0x2d926be8 nid=0xef8 in Object.wait() [0x2e13f000..0x2e13fb68]
at java.lang.Object.wait(Native Method)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0x058debd0> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=6 tid=0x2d8f8cd0 nid=0xa10 waiting for monitor entry [0x2dfce000..0x2dfc
fbe8]
at oracle.jdbc.driver.PhysicalConnection.isClosed(PhysicalConnection.java:1411)
- waiting to lock <0x06b38170> (a oracle.jdbc.driver.T4CConnection)
at oracle.dbtools.raptor.controls.cellrenderers.DefaultCellRenderer.getTableCellRenderer
Component(DefaultCellRenderer.java:103)
at javax.swing.JTable.prepareRenderer(JTable.java:3924)
at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2070)
at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1972)
at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:1895)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
at javax.swing.JComponent.paintComponent(JComponent.java:742)
at javax.swing.JComponent.paint(JComponent.java:1005)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JViewport.paint(JViewport.java:728)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JSplitPane.paintChildren(JSplitPane.java:1021)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintChildren(JComponent.java:842)
- locked <0x05874ed8> (a java.awt.Component$AWTTreeLock)
at javax.swing.JComponent.paint(JComponent.java:1014)
at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4963)
at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4916)
at javax.swing.JComponent._paintImmediately(JComponent.java:4859)
at javax.swing.JComponent.paintImmediately(JComponent.java:4666)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:451)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilit
ies.java:114)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"AWT-Windows" daemon prio=6 tid=0x2d8df4e8 nid=0xbb4 runnable [0x2ddcf000..0x2ddcfce8]
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:269)
at java.lang.Thread.run(Thread.java:595)
"AWT-Shutdown" prio=6 tid=0x2d8df0f0 nid=0x8e8 in Object.wait() [0x2dccf000..0x2dccfd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x05872240> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x05872240> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=6 tid=0x2d87d8d0 nid=0x8ec in Object.wait() [0x2dbcf000..0x2dbcf9e
8]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x058722c8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=6 tid=0x00c74c70 nid=0xa48 runnable [0x00000000..0x00000000]
"CompilerThread0" daemon prio=6 tid=0x00c73328 nid=0x9ac waiting on condition [0x00000000..0x2d0
bf84c]
"Signal Dispatcher" daemon prio=6 tid=0x00c72768 nid=0x6a4 waiting on condition [0x00000000..0x0
0000000]
"Finalizer" daemon prio=8 tid=0x00c68818 nid=0x960 in Object.wait() [0x2cebf000..0x2cebfce8]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x058201f0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=6 tid=0x00c67d60 nid=0xd0 in Object.wait() [0x2cdbf000..0x2cdbfc
68]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x05820270> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x00858ae0 nid=0x874 waiting on condition [0x00000000..0x0012fb70]
"VM Thread" prio=6 tid=0x00c283c8 nid=0x5d8 runnable
"VM Periodic Task Thread" prio=6 tid=0x00c72440 nid=0x674 waiting on condition
Message was edited by:
fac586 -
Process chain stops in infopackage with yellow status
Hi Gurus,
We are experiencing some difficulties regarding the use of process chains with warnings. Our SAP BI system is connected to an ETL server which feeds us with data from other systems. We have a query that has a push-button functionality that starts a process chain beginning with data extraction with an infopackage and ending in a infocube. The problem we have nowadays is that whenever the ETL workflow fails the infopackage status remains yellow, while our objective would be a red status. To try and solve this problem we forced a timeout in the infopackage. Once we check the log in the process chain it displays a message containing something like "status request modified , do you wish to add subsequent processes?", if we say yes it refreshes the status of the infopackage to red and it all goes ok. What we want is to get rid of this warning and that the status is automatically changed. We've checked other posts and we didn't reach any conclusion... Note 708480 gives us a possibility of automatic desicion but how could we integrate it in our process chains since it is based on shcedulling and not triggers?
Your help would be much appreciated,
Thank you
Bruno RodriguesHi,
We have two connected links in the process, one to continue the process chain when process status is green and other link to red status. The problem is the process status remains yellow until our confirmation in pop-up.
The process chain should be started by user in web browser. So, it isn't possible run it in background.
Thank you,
Regards,
BR -
In the MMC, the dispatcher stays yellow, with the status
Hi all,
In My Solution Manager system, In the MMC, the dispatcher stays yellow, with the status 'Dialog Queue Info unavailable'.
However, the system continues to run. Can you please help on this.
Thanks
sumanHi,
for this problem, check SAP note 396309 and 72248.
Thanks
Sunny -
How do I run SQL statements with my GUI ?
Hello,
i created a simple GUI with a status text box on top and a text box on the bottom to type in sql commands. Can somebody help me modify my code so that I can at least run a create table command and give the status of "successful create table" in the top text box?
One other question I have is that I already have a login screen gui that creates the sql connection and that gui calls this gui. Do I have to pass this connection to this new class or not? and if so, how do i do it? thanks again!
import java.awt.*;
import java.awt.event.*;
import javax.swing.JFrame;
import javax.swing.*;
import java.sql.*;
public class SqlGui extends JFrame {
public SqlGui() {
super("Oracle SQL Application");
setDefaultCloseOperation(EXIT_ON_CLOSE);
JTextArea outputArea = new JTextArea("output here",20, 0);
outputArea.setLineWrap(true);
JScrollPane scrollOutputArea = new JScrollPane(outputArea);
JTextArea inputArea =
new JTextArea("enter commands here",2, 20);
inputArea.setLineWrap(true);
JScrollPane scrollInputArea = new JScrollPane(inputArea);
JPanel buttonPanel = new JPanel();
JButton executeButton = new JButton("Execute Command");
buttonPanel.add(executeButton);
// do work here?
JButton exitButton = new JButton("Exit");
exitButton.addActionListener(new ActionListener() {
public void actionPerformed(
ActionEvent ae) {
dispose();
buttonPanel.add(exitButton);
JPanel sqlPanel = new JPanel(new BorderLayout());
sqlPanel.add(scrollInputArea);
sqlPanel.add(buttonPanel, BorderLayout.SOUTH);
JSplitPane mainsplit =
new JSplitPane(JSplitPane.VERTICAL_SPLIT,
scrollOutputArea, sqlPanel);
getContentPane().add(mainsplit);
setSize(800, 500);
setLocationRelativeTo(null);
setVisible(true);
}Hello,
There are two ways to execute the SQL command in GUI , one by passing the connection object from other scree as specified by you is logic screen (write a constructor which takes connection parameter as input) else create the connection in this present GUI screen also as shown by me.
import java.awt.*;
import java.awt.event.*;
import javax.swing.JFrame;
import javax.swing.*;
import java.sql.*;
public class SqlGui extends JFrame implements ActionListener{
String url; // url providing the database details
Connection connect;
JTextArea inputArea;
JButton executeButton;
JTextArea outputArea;
public SqlGui() {
super("Oracle SQL Application");
setDefaultCloseOperation(EXIT_ON_CLOSE);
try
url = "jdbc:odbc:dsnName";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
// url , userid, pwd of database like scott,tiger
connect = DriverManager.getConnection(url,"userid",
"password");
System.out.println("Connection Sucessful \n") ;
catch (ClassNotFoundException cnfex)
cnfex.printStackTrace();
System.out.println("Connection Failed " + cnfex.toString());
catch (SQLException exp)
System.out.println(exp);
outputArea = new JTextArea("output here",20, 0);
outputArea.setLineWrap(true);
JScrollPane scrollOutputArea = new JScrollPane(outputArea);
inputArea = new JTextArea("enter commands here",2, 20);
inputArea.setLineWrap(true);
JScrollPane scrollInputArea = new JScrollPane(inputArea);
JPanel buttonPanel = new JPanel();
executeButton = new JButton("Execute Command");
executeButton.addActionListener(this);
buttonPanel.add(executeButton); // do work here?
JButton exitButton = new JButton("Exit");
exitButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
dispose();
buttonPanel.add(exitButton);
JPanel sqlPanel = new JPanel(new BorderLayout());
sqlPanel.add(scrollInputArea);
sqlPanel.add(buttonPanel, BorderLayout.SOUTH);
JSplitPane mainsplit = new JSplitPane(JSplitPane.VERTICAL_SPLIT, scrollOutputArea, sqlPanel); getContentPane().add(mainsplit);
setSize(800, 500);
setLocationRelativeTo(null);
setVisible(true);
public void actionPerformed(ActionEvent ae) {
if (ae.getSource() == executeButton) {
// To clear the fields
create(inputArea.getText());
public static void main(String args[]) {
SqlGui app = new SqlGui();
public void create(String SQLCommand) {
String query = SQLCommand;
outputArea.setText("The Result of Executing the query" + query );
try{
Statement st = connect.createStatement();
st.executeQuery(query);
JOptionPane.showMessageDialog(null,"Command Executed Sucessfully");
catch (SQLException sqlex) {
System.err.println("Unable to Execute Command :");
outputArea.setText("Unable to Execute Command :" +query);
sqlex.printStackTrace();
Hope this sucessfully works for you. -
Hi all,
knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
Situation:
Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
Second child domain also contains a SCCM SP1 server (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
Error:
SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
wsusutil checkhealth =>OK
downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
wsus admin console able to connect and configuration possible => OK
IIS ports configured within SMS are equal to those configured for WSUS website
SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
wcm.log does report an error: (SCCM Log files at the end.)
"The request failed with HTTP status 503: Service Unavailable"
IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
Questions:
What else should I look at? (registyr, SUSDB content,..)
What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
And finally - Who does know the solution ?
wcm.log:
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
wsyncmgr.log (as a result of being not able to configure upstream server I guess):
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)I just experienced the exact same scenario. After much digging I found that csakg6so posted a fix at
Windoows-Noob
Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
Go to internet options
Go to conections
Go to LAN settings
Uncheck all boxes
The original post said to reboot, but that wasn't necessary for me.
After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized. -
"The request failed with HTTP Status 400: Bad Request." when running reports
Hi,
I installed reporting services and the install went fine. The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
ThanksI reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n -
I got the error "The request failed with HTTP status 401: Unauthorized." when I call the Reporting Service Web Service.
The code is very simple:
// Initialise the reporting service Web Service
this.RSWebService = new ReportingService2010();
// Pass windos authentication credentials to Web Service
this.RSWebService.Credentials = System.Net.CredentialCache.DefaultCredentials;
// List children
List<CatalogItem> reports = this.RSWebService.ListChildren(folder, false).ToList();
The SQL Server is installed on a different machine (say server A) from the Web server (say server B). We are using Windows Server 2003.
The code work fine for all the scenario below:
i) Run locally (XP) to call the web service on the sql server
ii) Provide the Network Credentials with the username, password, and domain when calling the web service
iii) If the web server and sql server is using same server (i.e. not distributed)
I'm using windows authentication and impersonation. Any idea?Hi Raymond,
If I understand correctly, the issue only happens in the environment that the web server is different with the SQL Server Reporting Services server. This means the web server is a remote server of the Report Server. Windows Integrated authentication is used
in this case. When running the web page, the 401 error occurs.
If so, it is actually a double hop issue. The double-hop problem will usually only be an issue to those of you who write some sort of web-based code (a web application or web service) that uses impersonation.
To fix the issue, we can configure kerberos authentication for the web application and the SQL Server Reporting Services.
Below is a great article that has delivered many solutions to fix the issue you met:
http://odetocode.com/articles/216.aspx
Additionally, you can read the following article to know more about double-hop:
http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
http://blogs.msdn.com/b/knowledgecast/archive/2007/01/31/the-double-hop-problem.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT
Thanks Jin. I believe this is the cause of the problem as well.
I tried to register the SPN but unfortunately it still doesn't work. I'm not sure whether I'm using the correct SPN name.
I have 3 reporting server instance on the SQL box. So the Web Service URL is like
http://Server:80/VirtualDirectoryDev,
http://Server:80/VirtualDirectoryTest and
http://Server:80/VirtualDirectoryStaging .
What's the SPN I need to register?
I tried
Setspn -a http/Server:80/VirtualDirectoryDev domain\account
and
Setspn -a http/aerver:80 domain\account.
But both of them are not working :( -
Service Clients failing with "The request failed with HTTP status 401: Unauthorized"
Hello,
We have implemented a solution using the SSRS web service clients as produced by the WSDLs. We have deployed the application on one server, and via the code we are calling the SSRS on another server (i.e., not using ReportViewer, etc.). We do
know that the user signed in has permissions since from the same staging server the Report Manager and Reports can both be accessed and viewed. However, it's only when we run the application and attempt to execute a report on the remote SSRS server that
we get the following error:
The request failed with HTTP status 401: Unauthorized. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
methodName, Object[] parameters) at AMC.AssetTracker.Reporting.ReportExecution.ReportExecutionService.LoadReport(String Report, String HistoryID) at AMC.AssetTracker.Reporting.Report.GetReportByteArray() at AMC.AssetTracker.Reporting.Report.get_ReportStream()
at AMC.AssetTracker.Reporting.Report.get_GetWebUIDisplay() at AMC.AssetTracker.UserControls.AssetTrackerMain.btnGenerate_Click(Object sender, EventArgs e)
The credentials we have tried are the DefaultCredentials. One question I have is how do you use custom credentials if neither the DefaultCredentials or the DefaultNetworkCredentials work? Also, this service call does have to go through an ISA
server before reaching the SSRS server.
Any ideas?
Thanks.It sounds like Kerberos authentication is needed in your situation since it's not on the same box.
There is a one-hop limit with NTLM authentication.
For more info please see the link below:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/452e9627-cd8e-4709-bdd0-fbafcf9fd719
Hope this helps!
Thanks, Michael Mei -
SM13 - Error in Collect.Run - Yellow status update records.
Hello,
After some problems with update queues in R/3, we have some update records in yellow status "Error in collective run" in sm13 t-code.
If we run collective run, new records are pushed into rsa7, but this yellow status records won't move, and we actually need them.
Does anyone know how to process this errors?Hi,
There is no problem with background process, the new update records are being processed with no problem.
These update records remain in yellow status since yesterday, but new records are being processed. -
Dispatcher service is yellow and unable to start visual admin.
Hello all:
Here is my new problem.
Everything was going fine untill I finished the post installation activites on PI7.0. I am not sure if I missed any step or not.
After the changes I stopped the instance and restarted it and the "Disp+word.exe" is yellow with the message <b>"Running, Message Server connection ok, Dialog Queue time: J2EE:Some Processes running".</b>
I can't connect to Visual admin. Getting an error when hit connect "<b>unable to loockup connection default, http:
sapinst001:8010/msgserver/text/logon returned empty list of conneciton parameters"</b>
Check the log files and here are some info from them:
Dev_Server0:
Thr 1644] *** WARNING => INFO: Unknown property [instance.box.number=PI7DVEBMGS00sapinst001] [jstartxx.c 841]
[Thr 1644] *** WARNING => INFO: Unknown property [instance.en.host=sapinst001] [jstartxx.c 841]
[Thr 1644] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 1644] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
Can you please help me with this? I need to finish this install by Monday.
Regards,
N.SIt's important to understand if the dispatcher is not running or just the server is not running: try to look to the log files
/usr/sap/<SID>/DVEBMGS<nr>/work/dispatcher
/usr/sap/<SID>/DVEBMGS<nr>/work/server0
and
/usr/sap/<SID>/DVEBMGS<nr>/j2ee/cluster/server0/log/defaultTrace.trc
You should find the error that prevent the java application to start.
The more common reason are the inability to detect the path of JRE or some parameter wrong in the configtool
Regards
Sandro
Maybe you are looking for
-
I have a home server that I just set up recently that runs Arch linux. It exports a couple of external hard drives via NFS. I have been mouting them with autofs on my laptop. However, after several hours the entire system completely hangs up. I o
-
Software Updater doesn't work, can't shut down my mac
Hi, I am using the Mac OS 10.5 and have a problem with my Software Updater. If I open the "Software Updater" from the Apple-Menu nothing happens, if i press on the button "Software Updater" in the "About this Mac" window, again no reaction. If I open
-
How to Create a Back button in Flash
Hi all, I need to create a back button for my flash app. It doesn't need to be connected with Browser. It just need be able to remember what frame they were viewing, and bring them back. Is there any event I can use for this? I made an variable calle
-
How to merge text attribute in query designer
Hi, please does anybody know, how to merge, let say, two text attributes of one characteristic into one long text? I know, that it is possible with method, which is finally called in the Web Application Designer. But I need to proceed this on the que
-
hi, i have an scenario that receive and IDOC and create two flat files. I did it using two BS and two Communication channels. but possible create my two flat file using one BS and one CC?? Regards Rodrigo Pertierra