Display as Key and Name Not working properly after upgrade to Bi7.0

Hi Bw Guru's
Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
   Right click on workbook -> Currency translation-> Database currency .
    but after upgrade to BI7.0 this is not working ..
2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
Please suggest me..
Thanks in advance
Shu Moh.

Dear Harita
The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
Shu Moh

Similar Messages

  • Wifi is not working properly after upgrading 7.1.1 onmy i4s

    Dear Apple
                      i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
    its my humble request please find a solution and provide me as soon as possble..
    my totally work on wifi .
      and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
      Thanx & Regards
        Sam
      +91-92555-04628

    settings - general - reset - reset network settings.

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • ESS is not working properly after upgrade from 4.7 to ECC6.0

    ESS Scenario in 4.7
    4.7 Scenario:
    The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
    List of Services used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
    1     Home Page     PZM3                                          Standard                 Service
    2     Inbox                     BWSP                                          Standard                 Service
    3     Calendar                     BWCA                                          Standard                 Service
    4     Whou2019s Who     PZ01                                          Standard                 Service
    5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
    6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
    7     Section 80C     PZ88                                          Standard                EWT
    8     Section 80                     PZ80                                          Standard                EWT
    9     Form 16                     HRESSIN_F16                          Standard                EWT
    10     Address                     PZ02                                             Standard                EWT
    11     Bank Information     PZ03                                          Standard                Service
    12     Open Appraisals     Not Available                           NA                                 Service
    13     Emergency Address     PZ05                                           Standard                 EWT
    14     Family/Dependents     PZ12                                           Standard                 EWT
    15     Personal Data     PZ13                                               Standard                  EWT
    16     Previous Employers     PZ28                                           Standard                 EWT
    17     Apply Leave     WS20000081                           Standard               Service
    18     Leave Overview     WS01000109                           Standard              Service
    19     Leave Balance     PZ09                                             Standard              Service
    20     Loan Application     ZLOAN                                          Customized              Service
    ECC6.0 Scenario:
    In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
    There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
    OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
    List of Services would be used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
    1     Home Page     PZM3                                       Standard                           service
    1)this service is not available
    2)SAP does not provide any replacement.
    3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
    4)Given reference of few notes.
    5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified  to access the services via URL or by OKCODE.
    Screenshot attached below.
    2           Whou2019s Who                 PZ01                                      Standard                             Service
    1)this service Available
    2)Not Working properly.
    3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
    7     Section 80C     PZ88      Standard     EWT     Available               
    8     Section 80      PZ80     Standard     EWT     Available               
    9     Form 16                HRESSIN_F16     Standard     EWT     Available               
    10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
    11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
    12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
    13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
    14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    16     Previous Employers     PZ28     Standard     EWT          Service Available          
    17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
    18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
    19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

    Ya ramakrishna,
    Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
    Please do the needfull,
    Julius

  • 2008 Macbook pro left click not working properly after upgrading to 10.6.8

    I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
    Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything.  I have tried plugging in a mouse, but when I do so the mouse also behaves the same way.  The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
    I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
    I tried deleting  com.apple.driver.AppleBluetoothMultitouchTrackpad.plist   and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
    Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

    I started having the same issue after update.  I'm on a MacBookpro running 10.7.2
    ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working.  Two days later problem was back.  I then did a reboot and the computer was back to working.  Today the computer worked fine tell it went to sleep.  I had to do a hard reboot to get the Mac up and running and now no left click.  Please help. I can not use the Mac  with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working.  One other item when you go to pick your user at startup the left mouse click works.  Help!

  • Anyone else having volume icon on ipod touch 4gen just popping up and not working properly after upgrading to ios 6.1?

    Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
    I have a 4th gen ipod touch which  until upgrading to 6.1 from 6.0 was working perfectly.
    Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird!  Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
    thanks!

    I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back. 

  • Bluetooth not working properly after upgrade to iOS4

    I upgraded my iPhone 3g to iOS4 the other day. Apart from running stupid slow now, and even though i've done numerous hard resets, the bluetooth doesn't work properly anymore.
    If I switch off bluetooth, then switch it on, it connects fine. Once I disconnect though, that's it. I have to restart it again.
    Looks like all those complaints about iphone 4 are actually and iOS4 BUG.
    I wish I'd never upgraded now. Actually, that's not true. I wish Apple would help me DOWNGRADE my iphone 3g so i can use it again. I will not go and buy and iphone 4 just cos of this. If anything I'll switch to Android just because a) i'm not a fanboy and b) consumers should not be treated in such a belligerent manner.
    So, anyone know how to resolve this bluetooth issue? It's got to the point where it's dangerous in the car because my phone rings and I have to recycle the bluetooth to connect it.
    Message was edited by: anthonybrooker

    The problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
    To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
    Ernie

  • NI-DAQmx 8.8 does not work properly after upgrade to LabVIEW 8.6

    Hi,
    I just upgraded to LabView 8.6 from version 7.1 and found out that the NI-DAQmx 8.8 drivers do not install correctly, since there is not Measurement I/O tab in the Functions palette (see attached document). The curious thing is that I can see all my NI-DAQmx devices in the MAX, and they all test correctly, i.e., they are working correctly. The sales representative for my area recommended me to uninstall , and reinstall LV8.6 and then reinstall the NI-DAQmx 8.8 drivers, but it did not work. I still do not see the Measurement I/O functions and my application says that it "cannot compile" the NI-DAQmx vi's. Thanks in advance for your help.
    Peter
    PS. Someone reported a similar problem back in 2003, but the final solution was not posted. Thanks again.
    Attachments:
    LV8.6.doc ‏116 KB

    Dear Mallori,
    Thanks for your help. You are right, I uninstalled and reinstalled LabVIEW 8.6 (update from LabVIEW 7.1) and reinstalled DAQmx 8.8. I still continue to have some problem that seem (to me) beyond compatibility issues. Here are the answers to your questions:
    1.  Before you reinstalled DAQmx 8.8, did you
    uninstall it? If not, then I  believe that the installer would see the
    driver already present and not actually make any changes.
    REPLY: No, I did not uninstall DAQmx 8.8. What do you recommend? Should I uninstall BOTH LabVIEW 8.6 and DAQmx 8.8 and then reinstall everything again? 
    2.  When you say that the VIs are not responsive,
    could you describe this a bit better? Perhaps post one of the error
    messages about compiling that you mentioned in your first post?
    REPLY: I am having a lots of "This SubVI is not executable" error messages in many of the library VI's not even mine. See the attached file.
    3.  If you open the NI Example Finder (Help»Find
    Examples) and the expand Hardware Input and Output»DAQmx»Analog
    Measurements»Voltage, are you able to run one of the example programs
    and see the correct values that you see in the Measurement and
    Automation Explorer Test Panels?
    REPLY:  I tried to runa couple of the examples for continuous voltage acquisition (internal clock) and both open with errors (see attachement).
    Thanks again for your help. I am looking forward to your recommendation.
    Regards,
    Peter
    Attachments:
    LV8.6-3.doc ‏43 KB

  • Organize by conversation is not working properly after upgrade to Lion

    After upgrading from 10.6 to 10.7 I've figured out that Mail Application is not very accurate with organizing by conversation. Mail from Snow Leopard was pretty nice. But after upgrade it started to make several conversation. This is very annoying especially when I'm working with support tickets.
    Here is one of the example:
    Mail 10.7 ( Lion )
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    Mail 10.6 ( Snow Leopard )
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    I also tried Mozilla Thunderbird. It is organizing by thread very accurate.
    Is there any way how to configure this in Mail? May be I'm doing something wrong?
    I like all new features of new Mail programm, but it wi very annoying.
    Thanks,
    Shony.

    Hi Sundar & Rakesh
    I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
    ** Scenario Summary **
    The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
    Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
    System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
    Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
    http://scn.sap.com/docs/DOC-2513
    What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
    Work Protect Mode
    http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
    Lastly have you attempted to change the property value and restarting the service ?
    Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
    Kindly update me as per your findings.
    Kind Regards
    Troy Cronin - Enterprise Portal Support Engineer.

  • Battery not working properly after upgrading to 10.8.5

    Hi guys,
    i have upgraded recently to OS X 10.8.5 and now battery charge is always 0% and battery charging light in green state; system is indicating "replace now" as battery condition;
    the thing is that, before the upgrade, even if battery was not lasting more then 50 minutes (400 and more recharging cycles), it was fine;
    now when I plug the power cable and boot the laptop, it seems is trying 3 times to boot;
    I did check and I have the latest SMC firmware; trying to reset it as described in
    http://support.apple.com/kb/HT3964
    did not work.
    I suppose i have to bring it to the support but anyone with a similar issue?
    Thanks
    G.

    Thanks for your reply;
    yes, the update raised is probably picking up that my battery is not anymore in good condition; as it is indicating  "replace now" as condition and Apple documentation states:
    Replace Now: The battery is functioning normally but holds significantly less charge than it did when it was new. You can continue to use the battery until you replace it without harming your computer.
    Saying "functioning normally but holds significantly less charge", I would expect the battery to keep at least the 50 minutes of charge (as before the upgrade); but now is not re-charging at all (0% always and green light status); and the consequence is that as soon as I unplug the power cable, the laptop will die. So I still believe there was something with the upgrade and the SMC firmware (my mac is a MacBookPro.8.2 early 2011).
    Thanks
    G.

  • Camera lock screen iPhone 5 not working properly after upgrade to iOS 8

    After I installed iOS 8 on the iPhones 5 of my and my wife's the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
    On the iPad 2 and the iPad Air (both upgraded to iOS 8) I don't have this problem. It seems to be iPhone 5 specific.
    Has anyone else experienced this problem?

    Having the same problem.  I'm on an iPhone 5 and I have updated to 8.0.2.  When I go to apps directly from the lock screen (timer, calculator, camera) it opens up then immediately turns into a black screen.  It appears that removing my passcode fixes this bug, but I can't have an unsecured phone.  Please help Apple!

  • App Store not working properly after upgrading to Yosemite

    After upgrading from Mavericks to Yosemite. I checked the App Store's icon to see that I have 6 updates. I launched the App Store and this was my window:
    This is my Purchases tab (although I am signed in):
    And this is my Updates tab (Although it says 6 updates. They should be iWork and the other new Yosemite updates.):
    When I click on Store -> "View my account", it keeps on asking me to sign in forever.
    Also when I click on "iCloud" in preferences, I get this error which I think is related:
    I tried restarting my mac several times. I tried quitting the storeagent from the Activity Log. But it's still the same.

    I am having the same problem since downloading ios6
    Almost wish I hadn't
    Can't get YouTube as apple removed it
    When I go to apps it keeps giving me a blank page too
    I type in YouTube and it goes to page with cancel far left. iPad iPhone app in middle and search box for YouTube far right
    But it just goes back to beginning when I cancel
    Is it corrupted..will apple sort this ASAP
    It's not only you tube I want...
    Help apple! Or anyone

  • Portal Work Protect mode is not working properly after upgrade to NW 7.4

    The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data")
    When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup.
    Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window.
    This was working fine before upgrade to SAP NW 7.4 SP 5.
    Please let me know if anyone have faced this issue before or have an resolution.
    Thank you.

    Hi Sundar & Rakesh
    I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
    ** Scenario Summary **
    The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
    Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
    System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
    Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
    http://scn.sap.com/docs/DOC-2513
    What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
    Work Protect Mode
    http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
    Lastly have you attempted to change the property value and restarting the service ?
    Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
    Kindly update me as per your findings.
    Kind Regards
    Troy Cronin - Enterprise Portal Support Engineer.

  • Adobe 9 Pro not working properly after upgrading to MS Office 2007

    I have Adobe 9.0.0 Pro on my Windows XP machine. We had been using MS Office 2003 (Word, Excel, Powerpoint, etc) and I had in my prologue.ps file added a bookmark to be added when I create a pdf. This worked fine. We then upgraded to MS Office 2007 and the bookmarks are now NOT created. The only difference is the change from Word 2003 to Word 2007. Also if I have a Word document with Times New Roman font and I create the pdf, the font changes from Times New Roman to something that looks like Arial. If I save the the document as a pdf, it changes the font. If I print the document as a Adobe pdf, it comes out find. Any suggestions on how to fix the issues?

    Our machines are locked down for any changes. Any updated/upgrades/changes must be made by our IT folks.
    Peter J. Gore Willse, P.E., FSFPE
    Vice President - Director of Research
    Global Asset Protection Services, LLC
    100 Constitution Plaza
    12th Floor
    Hartford, CT 06103. USA
    (P) +1 860 293-7900
    (C) +1 860 460-1965
    (F) +1 860 293-7907
    Email: [email protected]
    Website: www.xlgaps.com
    An XL Group Company
    Follow us on Twitter at www.twitter.com/xlgaps

  • OBIEE 11g Ibots not working properly after Upgrade

    Hi ,
    We are currently upgrading our BI enviroment from 10g to 11g.
    WHile we are configuring Ibots ,they really doesnt work, it gives the below error.
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 1 of 3
    AgentID: /shared/test12
    [nQSError: 75006] Failed to send MAIL command. 5.7.1 Client does not have permissions to send as this sender AgentID: /shared/test12
    ...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /shared/
    Can any one give us the exact steps to configure ,or if im missing something....we have configured everything in the deployment of the Coreapplication in the business intelligence of the weblogic admin.
    Regards,
    KK

    Hi,
    check with the below link:
    http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-obiee-11g.html
    It may helpful to solve your issue..

Maybe you are looking for


HashFlare