Display chart values?

Is it possible to display values in a chart either on top of or next to the chart column, bar, point, ...? I can only get the chart to display these when I put the mouse pointer on the chart itself.
Henning

Hi Henning,
instead of using a table you may use a form with textboxes for each column and display the overallresults there.
So you have to dataflows from your datacontainer, each with a filter. One filter is set to filter on values for the chart. For example the calendaryear starts with 2, so the filter value is 2. Keep in mind that no exclude filters are supported. The second filter filters for the overall result, for example set the calendaryear filter to h over. You get one result row and can write each value in a textbox. Arange the text boxes in the layout on top of the columns.
Depending on your scenarion it might be usefull going for two datacontainers. But this my lead to performance issues.
Regards
Lars

Similar Messages

How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

JDEV 10G: how to display the value of the line chart using jChart in JSP

I have draw the line chart in JSP using the JChart and now I wan to display the value label in the line there..
but the value wasn't show..
anyone can help me..
thx..

Hi,
what I do understand, you want to display the value of each point in your Line Graph.
I guess you will be having BIGraph.xml file. In this file check the "Show Data Tips When Mouse is over bars" checkbox.
Lets try with this.
--Abhijit

Display three Values in Pie charts

Hi All,
I want to display three Values in Pie Chart(%, Value and one more field). Please suggest me any solution for this.
For Eg Pie chart should display value lie this :- Nokia, 25,025, 38.52% (It consists of three differet values)
Thanks,

I am not sure if you could get the concatenation to work.
But here are some ideas (please post if you get the solution):
- Take a look at the list of other formatting options based on the following link:
http://www.oracle.com/technology/products/xml-publisher/blog/xsltext/10134/oracle/apps/xdo/template/rtf/XSLTFunctions.html
- Another alternative is to customize the class file : oracle/dss/graph/SliceLabel.class located in bipres.jar
You would need to customize it to do what you need.
a) Modify this one so that it is used by the BIP Server
C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\lib
b) Modify this one so that it is used by the Client : MS Word AddIn:
C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib
regards
Jorge

Chart values are not displaying.

Hi Gurus,
We are in BI NW2004s SP11. Actually our web templets are publishing in EP.
For some of the charts are not displaying any values.
IGS_RFC_DEST version is 7000.0.8.1.
Can any one give me suggestion to fix the problem.
Thanks in advance.
Thanks
Raju.k

Hi Arun,
Some of the charts are in Line and Bar. When i check in IGS test here it is showing bar chart.
Still i am facing the problem. Is there any NOTE to apply? please suggest me.
Thanks in advance.
Thanks
Raju.k

Pie chart value not displaying in report builder

Hi,
I created a report by using report builder i used a pie chart in my report but one value is showing other one is not showing. Kindly tell me what is the problem behind it?
here is an image which is not displaying 1 value in pie chart. please help me

Hi Aamir,
Please check if there is any misconfiguration (e.g. show data label, formatting, etc.) for your chart slice per the following post.
http://social.technet.microsoft.com/Forums/en-US/ebc3bfc5-6338-4946-ade6-64e89611f6b7/ssrs-report-builder-30-pie-chart?forum=sqldatawarehousing
http://msdn.microsoft.com/en-us/library/dd220469.aspx
Further more, you can post this topic in SQL server forum for a better assistance.
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices%2Csqldatawarehousing%2Csqlanalysisservices&filter=alltypes&sort=lastpostdesc
Thanks
Daniel Yang
TechNet Community Support

How to display Zero values in the chart

Hi,
In BO design studio 1.3 we are using bar chart and line chart for one of the dashboard. we have enabled the data labels and data is also displaying in the chart, but for certain criteria the data is itself zero in the database. In such scenario chart is not showing zero as the data label and it is simply blank. Is there any way to display the values even though it is zero?
Thank You,
Palani.

Hi - I don't see a way to do that; if you want that in the future I recommend posting something on Idea Place - ideas.sap.com

Interactive Report Displaying Multiple Values (Chart)

Hi guys,
Is there a way to display multiple values into a chart report. Normally there is a combobox and you can only select one value. But i want to display multiple values into one chart and i have to use interactive report because sql report is not enough for me.
Apex product build is 4.0.2.00.07.
Thanks

Any ideas ?
Thanks.

How to display Month values in SSRS report

Hi All,
I have a requirement to display month values in SSRS Chart. x-axis should display all month names from January till current month. How can I set this properties and show it in a line graph
Thanks & Regards,
Regards RCP

Hi,
The above link is not meeting my requirement. I need January till July to be displayed in x-axis
labels of graph. How this can be achieved ??
Regards RCP
You can create a calendar table on the fly and use it for your dataset to be used in the graph. Use logic as below
http://visakhm.blogspot.in/2010/02/generating-calendar-table.html
For getting January till current month use query as
DECLARE @Start datetime,@End datetime
SELECT @Start = DATEADD(yy,DATEDIFF(yy,0,GETDATE()),0),
@End = GETDATE()
SELECT *
FROM dbo.CalendarTable(@Start,@End,0,1) f
As a long time persistent solution best option would be to create a calendar table in the database.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Chart value formatting

Hi all,
I want to format the chart value. There is a chart which is bar-line chart. From chart properties, when i check the "show values" option the value of both bar and line is shown.
The chart contain two bars and three lines. Among three lines, two lines show negative value. While showing these two lines the value of these lines are shown just on markers of the line.
Some times these negative values are not clear as these are on markers.
Is there any way to show the value of the line below the markers of the line of a bar-line chart.
thanks in advance

hi,
As there is no option/setting which will control the position of display of values w.r.t data marker,
One way to highlight the values when overlappng with data markers is to use background color.
Also, border can be used.
Data -> values -> Background Color.
Regards,
Vamsee

Simple Line Chart - Values over time

A simple line chart displaying a set of values over time would seem to be a very easy report to design. I'll be darned if I can see how to design it. Can anyone shed some light?
I have provided links to a report and a spreadsheet which is the report datasource. My actual report will use SQL Server as its datasource. I am providing ths excel based example for the sake of protability.You will need to set the datasource location after saving the files to your hard drive.
I can get the lines to draw properly, what I cannot figure out is how to specify the datetime values for the x axis. The column I would like to use on the x-axis is called DerivedLoggingTime.
I'd also like to get control of the logarithmic algorithm used to formulate the y-axis values. I am not always happy with the values that the log algorithm comes up with.
Any help is greatly appreciated.
[Link to report|http://www.usol.com/~joe/linechart.rpt]
[Link to spreadsheet|http://www.usol.com/~joe/AnalysisResults.xls]
Another discovery while working on this report - our database will be SQL 2008 and we are making use of the datetime2 datatype. CR appears to be treating this datatype as text. So when working with the SQL based datasource, I had to cast datetime2 columns as datetime in order for CR to see the columns as datetime instead of text. This is fine in this instance because the granularity of the datetime values for this particular report does not require datetime2, but that will not always be the case. CR will need to recognize the new datatype.
Edited by: Joe Sytniak on Jul 17, 2008 5:37 PM

Hi Joe,
The Date Axis Line Chart of the Numeric Axis Type Chart, can be used to display data on a regular interval of days, Months and Years. The information displayed can unfortunately not be more granular that days.
This type of chart is generally used when the data is recorded on irregular intervals in the database, and to make sense of the information stored it needs to be displayed at regular intervals.
Since the data stored in your data source seems to be stored every 4 minutes, it will not be necessary to use this type of chart. I will suggest to use the regular line chart instead.
To create a line chart using your date time field and value:
1. Select "Chart" under the menu "Insert"
2. Insert the chart on your report in the desired section.
    ( Group Header # 3 in your case. )
3. In the "Chart Expert" window, under the tab "Type",
    change the chart type to a line chart by selecting "Line" in
    the "Chart Type" list.
4. Under the tab "Data", add the database field that contains the Date Time information under the "On change of" list.
(In your case, add the "DerivedLoggingTime" database field)
5. To display the data for each minute, select the database fields you just added under the "On Change of" list, and
click on the button "Order". In the "Chart Sort Order" window,
select "For each minutes" in the "Section will be printed" drop down list, then click "OK"
6. Add the field you want to display the value in the "Show Value List", then click "OK"
Now it will display a line chart as desired, but since there is a lots of data point on your chart, the x axis date time labels will overlap each other. To avoid this situation, I will suggest to skip labels.
To format a chart to skip labels:
1. In the "Preview" tab of the report, select one of the x axis label, and right click on it. In the contextual menu, select "Group (X) Axis Options..."
2. In the "Group (X) Axis Settings" window, under the tab "Layout", check the option "Skip Group Labels" and set the value to 15 for example.
Now, it will display the date time label at every 15 data point.
As for your question on how get control of the logarithmic algorithm used to formulate the y-axis values, we unfortunately do not have much control over it other than:
- Entering static values, or
- Checking or Unchecking the option "Use Logarithmic scales"
The above options are available on the y axis. To change those options:
1. In the "Preview" tab of the report, select one of the y axis label, and right click on it. In the contextual menu, select "Group (Y) Axis Options..."
2. In the "Group (Y) Axis Settings" window, under the tab "Scales", you will see the following options:
- Minimum Values
- Maximum Values
- Use Logarithmic scales
I will suggest to check the option "Use Logarithmic scales"
Finally, as for the issue you discovered where SQL Server 2008 data type DateTime2 is converted to a string in Crystal Reports 2008, it is important to note that SQL Server 2008 hasn't been released yet, therefore it has not been tested in Crystal Reports 2008. Once SQL Server 2008 is released, I will suggest to test it again using the ODBC driver provided with this new version.
At this point I am assuming that this is happening because it is a new data type and an unknown data type get converted to string.

Free Form Template and Combining Chart Values during Runtim

Hi Guys,
Need your expertise on this. We received some unreasonable request for the following:
1. Free Form Template DURING Runtime
- moving charts from one place to another by dragging them from one place to another during runtime
2. Combining of Chart values during Runtime
-to be able to mash-up 2 different charts during runtime. For example, dragging a chart to another chart
would result to a combined-value of chart. For instance, you have a Sales Chart and a Production Chart,
if and when Sales Chart is dragged and placed on top of Production Chart then it would mash-up the values
and will produce only one chart.
Is this even possible?
Hope you guys can help.
Kind Regards and Many Thanks,
Mark

Hi Mark
1. Free form template is not possible with current version of Dashboard Designer. You may use the option of Dynamic Visibility to simulate this. But this might not serve your requirement 100 %.
2. Your requirement of mixing up chart just by dragging and droping on another is coming under Designing part. For designing we need software, in my point of view. Xcelsius is a Tool to generate required output in various formats. Here we need to finalise the output such as chart type/ data to be displayed/ format to be displayed, etc and while viewing we may play with data but not with objects other than dynamic visibility.
Hope this clarifies.
With best wishes
BaaRaa.

Issue with chart values!

Hi to all,
I hope if any one can help me out with this issue related to pie chart value information. To start I need to let you know what I have in my report so you will have a clear idea on what I'm trying to view in my report.
I'm running:
Opportunity-Product History report
Fields:
Business Area (4 different Business Areas (example: east, west north, south))
Revenue
The issue I’m having related to the revenue values of each Business Areas.
For example I can see the 4 different Business Areas on my pie chart, but the value (revenue) of all Opportunities for a specific Business Area “east” not equal to the total Revenue for “east” in my table below. It will show only the value $ for one of the opportunity in this Business Area “east”. But if I drill into Business Area “east” it will show me all the opportunities with all right values $$
My quest is how can I show the total amount of revenue in my chart with out drilling into each Business Area
Thanks,

Hi bvuHH,
According to your description, you checked "Show Data Labels" to show labels in the chart, if the data is too small, the label will be displayed outside the bar, the color of label and background of the chart is the same, and labels become unreadable.
According to my test, if the value of data is too small, the label will be displayed outside the bar area by design. As a workaround, we can change the color of label by following steps:
Right-click label and open Series Label Properties dialog box.
Click Font in left pane, click drop-down arrow next to Color and select a color, then click OK.
Besides, we can set background color of label by following steps:
Right-click label and open Series Label Properties dialog box.
Click Fill in left pane, click drop-down arrow next to Color, then select a color and click OK.
In addition, we can also change color of chart area by following steps:
Right-click chart area and open Chart Area Properties dialog box.
Click Fill in left pane, in Pick color section, click drop-down arrow next to Color, then select a color and click OK.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

GFW_PRES_SHOW display line value

Hi ALL,
     I create a report and call GFW_PRES_SHOW , but the report is not display line value.
call function 'GFW_PRES_SHOW'
     exporting
          container         = 'CONTAINER'
          presentation_type = gfw_prestype_lines
         PRESENTATION_TYPE = GFW_PRESTYPE_PIE_CHART
         orientation       = gfw_orient_columns
     tables
          values            = values
          column_texts      = column_texts
     exceptions
          error_occurred    = 1
          others            = 2.

Hi james,
See this link it is helpful to solve your problem
http://wiki.sdn.sap.com/wiki/display/Snippets/ABAP+-+Easy+Graph+to+use
CALL FUNCTION 'GFW_PRES_SHOW'
     EXPORTING
       presentation_type = 31        "graph type 31 = pie type, 8 or 1 = bar chart
       parent = contc                "Custom Container
     TABLES
       values = values               "row data(Maximun 32)
       column_texts = column_texts   " column definition
     EXCEPTIONS
       error_occurred = 1
       OTHERS = 2.

Displaying the value of an variable on the stage

I have managed to display the values contained in string variables on stage, and I am happy with that, however when I wish to display the value of an int and convert it to a string as one is supposed to do the output to the stage just calls it [class int] and does not give its value. any suggestions?
My rogram contains a stage at frame 1 which displays a word. The user must input a word. Frame 30 then displays the word which was displayed and the word input by the user. That all works fine. But the value of the variable NumberRight, which has been assigned to that variable will only display as [class int] without showing its value. (even though I have converet it to a string using the .to string function you see below).
My code is as follows;
trace( "The number correct was" + NumberRight); //This works fine in the output window and shows the value of the variable as NumberRight [class int]1 (showing the value to be 1)
outputText.appendText("in/"+textAtIN); //this works fine displaying the word presented and word input by user as in/in
outputText.appendText( NumberRight.toString(     )); //here lies the problem as it just displays [class int] and nothing else.
Yes I have managed to overcome that problem it was some code on the first frame, please excuse, however, now, is there any way to remove the [class int] bit from the displays, I wish to have the results as a clear copy of the results so that they can be printed out, without [class int] all over the place?

Hi Ned thanks for that. Yes I had accidently created blank spaces in the String() argument. (wanted to check if there was a subsequent difference in display and forgot to return them to normal ...Sorted )
Your next suggestion has eliminated the [class int] but I get a value now of 0.
My code on the first frame for a correct response for example is;
function keyPressedIN(event:KeyboardEvent):void
          if (event.keyCode == 13)/*Normally,this will move straight on to the next frame-
          recording a correct response and all that that implies in terms of scores etc. But now I have re directed it to Frame 30 to check are the variables working properly*/
                    //insert code for correct responses vowels etc.
                    VowelI = VowelI+1;
                    NumberRight = NumberRight +1;
                    stage.focus = stage;
                    //There is no need to display the text box as this is a correct response.
                    pupilsResponseIN.visible = false;
                    mainText.visible = false;
                    gotoAndPlay(30);//at the moment this takes me to the display frame to check if all is ok
On the first frame when the user say hits the Return key my code assigns the value of +1 to the variable; eg
NumberRight=NumberRight+1;
and the value of +1 to the value of VowelI
VowelI=VowelI+1
At Frame 30 the code is as follows;
stop();
trace( "The number correct was"+ NumberRight);
outputText.appendText("in/"+textAtIN);
outputText.appendText( "\n");
outputText.appendText("Vowels Correct ="+(int(VowelI).toString()));
outputText.appendText( "\n");
outputText.appendText("TotalCorrect="+(int(NumberRight).toString()));
//outputText.appendText( VowelI.toString());
Now what I am getting is
in/in
Vowels Correct = O
Total Correct = O
Yet the trace (output box) records the Number correct as [class int]1
many years ago I wrote this same program in Authorware using similar code. I am trying to re write it in FlashCS5 using ActionScript 3 and It take days to solve small problems. I notice also that If for example the user of the program makes an error and I record the error as NumberRight =NumberRight -1 the program records it as Total Correct = NaN .
I gave up on this a few months back but I am trying again. I think there must be a better way to do this. Variables do not seem to add up or subtract for me at present. no doubt its me thats got it wrong.

Display chart values?

Similar Messages

Maybe you are looking for