Display-Color-Depth
Hi there.
After an application-crash (After Effects) and cold restart my monitor-color-depth suddenly switched from millions of colors to maybe several hundreds of colors. I've tried cleaning the caches, throwing out preferences-files (out of library) and also resetting the color-depth by using third-party-applications. Still not working. I suppose it's some kind of problem in one of the preferences-files in the library, but I don't know which one.
The "About This Mac" section shows that the monitor would show some "Millios Of Colors".
As I can not work like this I made a new user-account. In the new user-account everything runs smoothly but for sure I would like to use my old user-account with all my settings and preferences instead of switching to a total blank one that I have to modify again to fit my needs. Does anyone have an idea what could be wrong or how to succesfully force the display to display millions-of-colors again?
When I log into my old user-account the display first shows normally, then switches to "hundreds-of-colors" after a split-second. Is there any way to slow down this process and monitor which preference-file the computer is loading in exactly this moment?
Also weird: when I connect to my old user account via remote access / screensharing (vnc://...) then the display looks normal from the remote computer.
Any ideas would be welcome. Don't know what else to do...
Cheers, Aeiou
What does it say if you go to About This Mac -> More Info -> Graphics & Displays -> Pixel Depth
1: Try resetting the PRAM.
2: Go to System Preferences -> Displays -> Color -> Select another profile or calibrate
3: Go to System Preferences -> Universal Access -> Slide the Contrast bar all the way to the left
Might end up just being a plist to snag though.
Similar Messages
-
Can't Bomgar in since upgrade - Screen sharing ... disabled ..unknown display color depth
Since upgrading multiple customer systems to Mountain Lion, I am no longer able to use Screen Sharing in Bomgar. The following message appears: Screen Sharing has been disabled by the customer client. [Uknown display color depth: 0]
The only brief workaround is to tell someone on the other end to manually change the display setting to Scaling instead of Best for built-in-display will allow a one-time access as that setting immediately reverts back to Best for built-in-display. Dumbing it down might make it persist, but that isnt' feasible.
Bomgar support is closed over the weekend. I contacted Apple, and they said that there is no way to make the setting persist. That rep also didn't know of any terminal command that could be used to set the Display Resolution to Scaled either.
If there were a terminal command to set it to Scaled, that would help much because the Command Shell option in Bomgar does work, and I am able to launch a terminal.
I also tried to see if there were any settings I could manipulate in Screen Sharing in OS X, but there were none. I am getting the same result with Screen Sharing enabled or not enabled.
Anyone else experiencing this?I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
and http://wiki.cchtml.com/index.php/Configuring
and I'm sure you've done
aticonfig --initial
I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver. -
10.5.3 upgrade screwed up my display - color depth stuck - solved
Post 10.5.3 my display is now stuck on thousands of collars whereas previously it worked and displayed fine as millions. Grays (like the top of the FF menue bar) are now white, the double arrow drop down box on this site is now teal.
Re-booting the computer, playing with Display options under System Preferences doesn't seem to do anything.
Update: Powering down, leaving computer off for a minute, letting it cool down seemed to solve the issue when re-booting. Must have been overheated or something.
Message was edited by: tsawickiIt would be Mimo's responsibility to update their firmware/drivers to support OSX 10.6.3. Have you checked with them?
Did you try resetting the PRAM?
Message was edited by: DaddyPaycheck -
Color Depth Choices Removed...Any other way to change?
SL removed color depth choices in displays. We use display link adapters (USB video cards) for extra external monitors (email/web etc) and setting the display to thousands increased performance dramatically. Now we are stuck at millions...
Anybody have some command line fu to change the display color depth?
<edited by host>Sorry... No.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
Error 0xBFF60492 on IMAQ USB snap.vi RT Video not support displaying selected color depth
Attempting to snap a picture with NI-IMAQ for USB in LabVIEW 8.0 using the following procedure.
1)I get the first enumerated camera, 2) open a session, with returned
string [0], 3) start a session, 4) snap a picture and 5) close
vi. My problem is that in step 4 with the IMAQ USB Snap.vi, I get
the following error.
Error -1074396014 occurred at IMAQ USB snap.vi
The image passed is not valid.
Possible Reasons(s):
IMAQ Vision: (Hex 0xBFF60492) RT Video Out does not support displaying the supplied image type at the selected color depth.
I give the snap.vi an Image in from rightclick->Create->Control
or rightclick->Create->Constant. The output image (on the
Front Panel) created by rightclick->Create->Indicator.
LabVIEW should insert the correct data structure to match the expected
input/output, and there is nothing I can that changes he color
depth. The GetImageInfo.vi reports that the camera is set up for
4 Bytes Per Pixel, with the rectangle 352x288.
Also the error message refers to RT Video Out, but I am using USB. This distinction is significant in NI Vision Assistant.Hello together,
I wanted to use a Sanyo Xacti CG 10 video camara in LabView.
By using the NI-IMAQ for USB Snap I get the following error: IMAQ Vision: (Hex 0xBFF60492) Ungültige Blit-Funktion des Videoausgangs.
Is it possible, that I can not use this camera in LabView?
Thanks a lot for your reply -
AMD FireGL GPU + Creative Cloud app = Color Depth & other Issues
Hello, I am writing this post to help anyone who may have ran into the same issues I am seeing with my AMD FireGL graphics adapter when using the Adobe Creative Cloud app on a windows 7 PC.
I ran into a problem installing and setting up the Creative Cloud app on my new workstation that has an AMD FireGL graphics processor.
First off, the system is new (dell precision m4800, with an AMD FireGL V M5100 GPU), and has all the most current drivers and updates available.. that is to say, this is not a hardware issue.
The system operates just fine outside of the Creative Cloud app, but when I installed and attempted to login to Creative Cloud for access to download Illustrator, etc., the Creative Cloud app would open up and then only display a blank white page. No graphics, no data, just white.
When I got stuck at this point I called Adobe support and spoke to a rep who had seen the issue before. The rep worked around the blank white page in CC by loading the windows device manager and manually disabling the AMD FireGL GPU device to re-install and login to the Creative Cloud app. This temporarily forced windows to use the default/dummy VGA graphics driver supplied with windows. With windows using the dummy 256-color vga driver we were able to get the creative cloud app running and get me logged in to install my design software. HOORAY!--or so I thought....
At this point I assumed the issue was resolved, but I found that there was a new issue popping up every time I rebooted my system. Windows would load and log me in using the 32bit color depth setting, but as soon as the Adobe Creative Cloud app started up, my color mode would switch to 256 colors... D`oh!
Obviously I don't want to run at only 256 colors, and neither should you! Adobe, why does my color depth change to 256 colors every time the Creative Cloud app is loaded?
If you want to temporarily reset the color depth to 32bit, you can go to Control Panel -> Display -> Adjust Resolution -> Advanced Settings -> Monitor Tab -> & select "True Color (32bit)" from the Colors drop-down menu. Using this method will allow Adobe Creative Cloud app to continue running 24/7, however this is only a temporary fix, which will need to be applied every time the system is rebooted, or any time a user logs off then back in.. Frankly, its a bit of a PITA, so why bother?
The permanent fix is simple.. go to Start -> & do a Search for "msconfig". Once found, run the msconfig utility and switch to the "Startup" tab, where you will be presented with a list of boot time startup items. Find the one labeled "Adobe Creative Cloud" and disable it by removing the check mark from the corresponding check box. Then click OK. You will be warned that a restart may be required.. go ahead and re-start. This time, when the system boots, Adobe Creative Cloud will not load, and your color depth will remain at 32bit. YAY!
If need be you can always load up Creative Cloud manually from the start menu if you need it, but it will knock your color depth back to 256 colors. Thus far i have had zero issues using adobe photoshop or illustrator without first loading the Creative Cloud app, so it isn't required. If i need updates or need to access other features within the Creative Cloud app i can, but it doesnt need to run 24/7 to use other adobe apps.
The short explanation is that Adobe is failing to fully and properly support the AMD FireGL graphics platform. The adobe rep i spoke to essentially said the same thing, but made certain to blame the graphics device and not adobe software--sure thing boss. The truth is that the FireGL and its varients have been on the market as long or longer than the nvidia products that are supported fully by adobe.
It is clear that Adobe has made a choice not to fully support AMD Workstation graphics (FireGL) since not only is the Creative Cloud app broken and causing problems, but also no graphics acceleration features work in any of my installed adobe apps.. I basically get a message saying "please us a supported graphics processor". Seriously, how is FireGL not "Supported"?
I am not an AMD or FireGL fanboy.. Frankly I cant stand AMD graphics adapters and I genuinely prefer nVidia on my personal systems. At home, my 5 year old $100 nVidia gaming card is fully supported in all the adobe apps..
At work, however, I have no choice what hardware is provided to me and this lack of FireGL support has negatively impacted my productivity more than once. Admittedly, nvidia has much more market share than AMD in the workstation graphics realm, but that does not mean adobe should just ignore AMD completely!
Hopefully this post will shed some light on issues with Adobe Creative Cloud app and FireGL graphics cards that others may be experiencing.
Good Luck!Minor correction... I called my GPU the FireGL, which is the old market name.. The current, proper market name is FirePro.. same line, just new branding after AMD purchased ATI.
-
W500 - switches to 16-bit color depth after disconnecting LCD TV
Hi guys,
My W500 always changes the screen color depth to 16-bit when I select "Notebook only (factory default)" on Fn+F7 menu, after watching movies on LCD TV. It happens both on Display Port and VGA connector. I have set "separate displays" (no desktop cloning). I remember having the same issue with old T61p. How to prevent that from happening?
cheers,
Mika@tester2002,
Do you have the latest video driver installed?
can you try this.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-T420-Screen-flickering-randomly-screen...
and also this one
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T400-Screen-refresh-rate-drop-to-50Hz-when-...
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
I installed Solaris 10 06/11 on an x86 PC
I found that XSun drivers works well for my video and display
but when login to Sun JDS the Colors are limited.
all descussions I saw in the forum are about Display Resolution , But I think that it is a Color Depth Problem
Please Can any one tell me how to change the color depth for Sun JDS to be 24 bits only ?
ThanksYou typically use the 'fbconfig' command to change colour depth. Check the man page.
-
Solaris 10 - Changing default screen color depth
Hello,
I just upgraded a Sun Blade from Solaris 8 to 10. I have a rather old image display application (ftp://east.la.asu.edu/pub/software/pw-5.23.tar.gz) that is absolutely essential for my work, and it will not run under Solaris 10, either on the CDE or jave/gnome desktops.
The executable for this application was compiled using gcc on Solaris 8, and ran fine on Solaris 8 CDE (v1.4.3?) with the "Most colors for applications" color setting in Desktop Color prefs. With that setup, the application allocated 216 colors when starting up, which was sufficient. If the application could not allocate enough colors, it would use its own private color map, which caused window "flashing," but that was OK.
Under Solaris 10 CDE (v1.6.3) and gnome, the application cannot allocate enough colors, and cannot even start with its own color map.
I re-complied the application on Solaris 10 using Sun Studio 11, and the same problem occurs with the new executable.
I think that the problem may be related to default color depth. Right now, with xwininfo, my Solaris 10 CDE xterms are 24-bit true color. Unfortunately, I think that I may need to set my default color depth to 8-bit pseudocolor for the application to run. How can I change the default color depth of the CDE and gnome desktops to pseudocolor? I know that the application works on HP-UX CDE with the default depth as pseudocolor.
I cannot remember if I had somehow changed the settings for color depth on Solaris 8 to get the application to run. I do know that the xwininfo results for a Firefox browser window running on my Solaris 8 CDE desktop was 24-bit true color. I hope very much that this will be the case if I change my default depth to 8-bit on Solaris 10.
Any help that anyone can provide would be GREATLY appreciated. I am dead in the water without this imaging application. I am a member of the Sun Developer Network, and I don't know if I should post this message somewhere on the Developer Forums. Please let me know if I should.
Thank you in advance!!!!!Hi,
In my first post there is a link to the code I am talking about. The code is public and available. It was created by Noel Gorelick at ASU. It is based on having an 8-bit Xserver running. There are few users of this code, but I completely agree with you that a new generation of unix-based imaging code needs to be developed that is system and Xserver independent. Optimal code should detect screen depth and open windows with desired color depth automatically, without "flashing.". That way, it could even run under Gnome, which allocates all but 18 8-bit colors for the desktop. Under CDE, the code allocates 224 colors for itself, which is great. The above code will create its own colormap if it cannot allocate enough colors, but there is flashing in that case. Have at it if you wish.
Best regards,
Sparcmaster -
Color depth of the mouse cursor
Upgraded to srss 4.2 yesterday and discovered the addition of Xrender support. After enabling it the mouse cursor switches to an animated one. This looks really horrendous, since the mousecursor is displayed in black and white (1bit color depth). Does anyone know how to increase the color depth of the mouse cursor? The screen is configured with a color depth of 24 bits
Gnome 2.16.0 on RedHat 5.3 with Metacity as windowmanager. The mouse displays just fine, but is was real bw non animated before Xrender. Now it is animated and the animation is converted to 2 bit, including dithering for shadows. Regard this as an esthetical bug. A resolution would be to search for a 2 bit mouse theme (or create one)
xdpyinfo
dimensions: 1680x1050 pixels (474x296 millimeters)
resolution: 90x90 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0x47
depth of root window: 24 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 256
preallocated pixels: black 0, white 16777215
options: backing-store YES, save-unders YES
largest cursor: 64x64
current input event mask: 0xfa2033
KeyPressMask KeyReleaseMask EnterWindowMask
LeaveWindowMask ButtonMotionMask StructureNotifyMask
SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask
PropertyChangeMask ColormapChangeMask
number of visuals: 8
default visual id: 0x23
visual:
visual id: 0x23
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x24
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x25
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x26
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x27
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x28
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x29
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits
visual:
visual id: 0x2a
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff, 0xff00, 0xff0000
significant bits in color specification: 8 bits -
hey , i got a fresh install of arch linux and installed Xorg and LXDE and KDEMOD in both of LXDE and KDEMOD the color depth not seems to apply , im using the nvidia-173xx drivers and i see this : http://img4.imageshack.us/img4/5051/200 … 0x1024.png
how can i fix this problem so my screen will show sharp ? (tried Defaultdepth and nvidia-xconfig) also i know its not hardware problem.
xorg.conf :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 2 12:45:55 PST 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "glx"
Load "extmod"
Load "freetype"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Proview"
HorizSync 30.0 - 80.0
VertRefresh 60.0 - 75.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5500]"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5500"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by liorc666 (2009-04-04 22:20:14)Hello jonashly,
What make / model computer are you using?
What operating system?
Sounds like a possible video card driver issue, have you tried uninstalling and reinstalling new drivers?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
Just installed Snow Leopard (surprise!) and am having an issue with the display.
Some older games which ran flawlessly under 10.5.x are now no longer working. Just a black screen when it launches, with full audio and keyboard interaction possible.
I suspect that 10.6 is not allowing the game to change the color depth to 256 color mode. I noticed that "Thousands" is no longer an option, either.
How can we get 256 color mode back?Hello jonashly,
What make / model computer are you using?
What operating system?
Sounds like a possible video card driver issue, have you tried uninstalling and reinstalling new drivers?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
Display Color Management Simulated Rec709 differs from ProRes Output
Okay. I've read the Adobe white paper on proper Color Management workflow about a dozen times now, and I'm still getting some inconsistencies in my render outputs.
DPX footage assigned a Kodak 5218/7218 Profile
Project Settings: ProPhoto RGB
Linearized Working Space
Match Legacy AE QT Gamma Adjustments
Output Profile: HDTV (Rec. 709)
I'm outputting to a ProRes 4444 file.
My problem arises from using the Simulate Output>Rec709 option in AE. I cannot get the output to look like this simulated color. Isn't that supposed to work?
I can match the output to AE when I turn off Color Management and apply a Color Profile Converter effect, but there is a shift in color when viewing Simulated Color vs. using the Color Converter Effect. Even in AE the Converter Effect looks different than Simulated Color.
I was under the impression that the point of the Simulated Output and Display Color Management options were to avoid having to do this. Should I change my workflow and just use the Converter Effect on all my comps? Or do I have a setting wrong somewhere? Has anyone else come across a discrepancy like this?Interesting. I thought it might have something to do with ProRes, but my bit depth is at 32, and the shifts I'm seeing are more subdued than the pictures in that post. It looks darker (like a gamma shift) and slightly more saturated.
I'm more interested to know why there is a difference in the simulated output vs the color profile converter. I can see the difference within AE, before exporting anything. What is simulated output doing that my profile converter isn't? -
How do I change Imac OS 10.7 color depth?
Im using an Imac with Mac OS 10.7.3. I am trying to use a Citrix to open some files but I get the error message that display is configured for 65536 colors and is not supported. I need to us 24 or 32 bit color. I cannot figure out how to make this change. Under system preferences>Display I see nothing that allows me to change depth to those levels.
Got to Displays icon in menu bar. When click on it I see the following. (see image below). Still can't find where to choose color depth.
-
Did iSight change my color depth?
I just installed an iSight camera and shortly after, I realized that my monitor's color depth had downgraded somehow.
For instance, the flat greys on the left and right of a Safari window toolbar come out like greyish teals; and skin tones in photographs and video appear posterized and flat due to the lack of colors.
I've checked my display settings in System Preferences: the colors are still set to "Millions". I even tried unplugging the iSight... still nothing.
any thoughts? Was it a Quicktime or OS update?Installing iSight did not change my display's color. I do not know anything you listed that might have caused your color shift.
I apply all updates to QuickTime and Mac OS and have never had such a problem. Do you use an update process such as How I Update My Mac OS X?
Have you recently performed your regular Mac OS X maintenance? If not, do so now. That may restore your settings.
Have you (or someone else who has access to your Mac or your Monitor) changed any monitor settings? You do not say what monitor you use. Perhaps it has external adjustments that may have been bumped out of adjustment?
You might also want to check your System Preferences > Displays > Color settings to see if it has been changed by someone.
If none of these things help you, try a search in Mac mini Discussions for "display color" (without the quotation marks) and see some of the suggestions there. The Mac mini users who post there may have better suggestions for you than I do.
Maybe you are looking for
-
Can anyone please help me? I have having difficulty removing iTunes from my PC; this is the message I am getting:
-
MP Error: StringIndexOutOfBoundsException: String index out of range: -1
Hi All, We are using PI 7.1 EHP1, Where in we would like to see the capabilty of User-Module for Conversion of IDoc Messages Between Flat and XML Formats. Gone thru the blog (/people/sap.user72/blog/2005/07/04/get-into-the-zone - Part 2) and maintain
-
Java.Lang.NullPOinterException when bursting with dataTemplate
Hi, I'm trying to burst using 10.1.3.3 with a dataTemplate. The following forum message states that this doesn't work, but I can't see a bug logged anywhere in the bug database: Re: bursting Does anyone know if this is true, and that it doesn't work
-
Hi All. How to make the JFrame immovable. that is ,the frame should not be dragged or resized by the user. Kindly help me out to sove this problem. I tried frame.setResizable(false); but it does not worked out. Regards, Sdivyya
-
Pro*C/C++ precompilation question at Solaris 10
Hello. Would someone tell me where the sys_include path is? I have tried with /usr/include with my precompiler option and it seems it cannot find <iostream> (PCC-S-02015). Thanks in advance.