Display issues between Pro and reader

Greetings,
My colleague and I are having issues getting a form we created to display as designed in reader.
The editable pdf displays as designed in Pro. When we open it up in reader and begin to type in a field, the text displays in an extremely small size. Once you click off the field, it will enlarge the font to the desired size. We are obviously overlooking something but I'm not certain what that is.
Any insight would be greatly appreciated.
-Kyle

I'm seeing a similar problem, though short-term sleep
is not an issue. It occurs after the system has
slept for multiple hours--overnight in particular.
Two displays, and Apple 30" and a Sun 24", attached
to an X1900 video card, Mac Pro 3GHz. A picture and
writeup in more detail are here:
http://diglloyd.com/diglloyd/blog.html#20070301MacProV
ideoProblems
I've updated the Mac pro firmware, installed all the
system updates, etc.
I think it's an ATI X1900 problem; my write describes
a similar problem on the G5 Quad with the ATI X1900
G5 edition.
Mac Pro 3GHz Mac OS X
(10.3.8)
PowerMac G5 dual 2.5 GHz Mac
OS X (10.4)
I have the same problem with Geoforce 7300 GT and MacPro!

Similar Messages

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

The NEW macbook Pro and Air are EXTREMELY close in form factor
The newest macbook Pro is essentially a larger macbook Air with Retina display and options for speed in increasing prices up to an independent graphics and quad core processor.
both Air and new Pro now have PCIe SSD and permanent RAM.
The Air is the lightweight portable form factor, fast to boot and shut down, but with longer battery life than any of the macbook pro in 13"
Now the new macbook Pro and macbook Air are extremely close in form factor and nature.
both have 802ac wifi
both have permanent RAM, no superdrive
both are slim profiles and SSD
The only real differences now are (in the most expensive Pros) faster processors and quadcore processors and top end model autonomous graphics.
....and of course the retina display
both are now "very good for travel"
Other than features the form factor of the Air and Pro are VERY close now,....so now its merely a matter of features and price more than anything.
You need an external HD regardless of what you get for backups etc. Drop into an Apple store and handle both and make your choice based on features, such as Retina or non-retina, .... both at a distance now look like the same computer.
The Pro weighs more, ....but nowhere near what it used to just a month ago on the older macbook Pros
The NEW macbook Pro is a different creature entirely than the older macbook Pro, .....the new Pro is thicker than the Air, but id frankly call the NEWEST Pro a "macbook Air with Retina display" , or
Maybe a “macbook Air PRO with Retina display”
Instead of Air VS Pro now,.....its really a smooth transition from Air to pro without comparing say, 2 different creatures, now its like contrasting a horse from a race horse.
Either one in 8gig of RAM (preferably)... the 4gig upgrade costs very little, the I7 you will notice only 15% faster on heavy applications over the I5, and NOTHING on most APPS.....I5 has longer battery life.
As you see below, the non-Retina 13" AIR is 82% of the Macbook with Retina display in resolution
there is no magical number of pixels per inch that automatically equates to Retina quality.
http://www.cultofmac.com/168509/why-you-might-be-disappointed-by-the-resolution- of-those-new-retina-display-macs-feature/
A huge internal SSD isnt a game changer for anything, you need an external HD anyway
what you WONT READ on Apple.com etc. is that the larger SSD are MUCH FASTER due to SSD density
"The 512GB Samsung SSD found in our 13-inch model offers roughly a 400MB/s increase in write speeds over the 128GB SanDisk/Marvell SSD"
http://blog.macsales.com/19008-performance-testing-not-all-2013-macbook-air-ssds -are-the-same
Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
http://www.youtube.com/watch?v=oDqJ-on03z4
http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
I5 vs. I7 performance 13” Macbook Air 2013
Boot performance
11.7 I5 ……11.4 I7
Cinebench
1.1 I5….1.41 I7
IMovie Import and Opt.
6.69 I5….5.35 I7
IMovie Export
10.33 I5…8.20 I7
Final Cut Pro X
21.47 I5…17.71 I7
Adobe Lightroom 3 Export
25.8 I5….31.8 I7
Adobe Photoshop CS5 Performance
27.3 I5…22.6 I7
Reviews of the newest Retina 2013 Macbook Pro
13”
Digital Trends (13") - http://www.digitaltrends.com/laptop-...h-2013-review/
LaptopMag (13") - http://www.laptopmag.com/reviews/lap...play-2013.aspx
Engadget (13") - http://www.engadget.com/2013/10/29/m...-13-inch-2013/
The Verge (13") - http://www.theverge.com/2013/10/30/5...ay-review-2013
CNet (13") - http://www.cnet.com/laptops/apple-ma...-35831098.html
15”
The Verge (15") - http://www.theverge.com/2013/10/24/5...w-15-inch-2013
LaptopMag (15") - http://www.laptopmag.com/reviews/lap...inch-2013.aspx
TechCrunch (15") - http://techcrunch.com/2013/10/25/lat...ok-pro-review/
CNet (15") - http://www.cnet.com/apple-macbook-pro-with-retina-2013/
PC Mag (15") - http://www.pcmag.com/article2/0,2817,2426359,00.asp
Arstechnica (15") - http://arstechnica.com/apple/2013/10...-pro-reviewed/
Slashgear (15") - http://www.slashgear.com/macbook-pro...2013-26303163/

When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

Hi fabiangs,
I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
I look forward to hearing back from you.
Best,
Sara

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Acrobat Pro and Reader fighting for Safari frameworks folder...

We manage hundreds of Macs of which most are at 10.4.8.
We have both Acrobat Pro and Reader 7.0.8 installed on all Macs.
Sometime within the last few weeks something has changed on our systems (eg: upgrading from something under 10.4.8 to 10.4.8) that is causing Acrobat Pro and Reader to fight for the Safari.app/Contents/Frameworks/ folder. This folder contains aliases to either Pro or Reader frameworks within that Acrobat app's own frameworks folder (...Acrobat Pro.app/Contents/Frameworks/)
This issue is that the end user is prompted to authenticate for either Reader or Pro to "repair itself" which it is just changing the aliases within the Safari Frameworks folder to point to their own frameworks.
If I set Preview as the default pdf viewer and then delete Acrobat Reader so that only Preview and Acrobat Pro are on the client, then it seems to work beautifully without authentication request. We would like to keep Reader on the systems though. We use Sassafras' Keyserver with a limited number of licenses for Acrobat Pro.
Has anyone else experienced this? Found a solution, etc?
Thanks!

I agree with rikbarry - I finally reinstalled Acrobat, then ran the
update to 9.4.5. The updater took nearly an hour to finish which can't
be normal, but the software appears to be the correct version now.
I work for a very small graphic design company and use an older emac
that has pretty much reached its shelf life for many apps and OS.
Could my aging computer be contributing to the problem?
Because we depend heavily on pdf workflow, I chose to reinstall
WITHOUT running the uninstaller first, as the 9.4.4 version was at
least still functioning. I was somewhat surprised that it worked, and
I am NOT looking forward to the next updater.

Differences between Stream and Reader

Hi All,
Can any one please tell me the differences between Stream and Reader
Thanks in advance

> If there would only be some documentation one
could
look at...
What would really be snazzy is if that documentation
were, say, hyperlinked, indexed, and easily found
online, ..........My dream is of an online tutorial that described in plain language basic java i/o and even gave examples. Maybe someday...

Problem with Adobe Pro and Reader on terminal server

Hi,
We have have a Terminal Server environment with Adobe Pro and Reader. We have security for Adobe Pro, so only certain user has access to Adobe Pro and all users has access to Adobe Reader.
Some users receive many email with pdf's attachments in Outlook and need to print these attachments. They use the Outlook function to print email and attachment automatically. The users who has access to Adobe Pro can print attachment automatically with no problem.
The problem is user who only have access to Adobe Reader. The user can't print attachment automatically with the email, only the email is printed. But, they can open attachment and print with Adobe Reader. But, it's impossible to open each attachment because there are so many.
Thanks for your help.
Jonathan

Hi,
So if I understand correctly,
1. You have installed Acrobat Pro & Reader on a Terminal server.
2. You have created a security group in your Active Directory Users & Computers for users having access to Acrobat
3. You have set permissions on C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe and C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrotray.exe on the terminal server and provided access only to the security group created above.
4. Users are accessing the Terminal server through RDWeb or connecting remotely through MSTSC (RDP) or using a .RDP file
5. Users get emails with PDF attachments and print the mail directly without opening the PDF in Reader.
Users check the box to print the attachments with the mail (see snapshot below):
Some questions:
1. What is the OS and platform (x86 or x64) of the terminal server?
2. What are the versions of Acrobat & Reader on the terminal server?
Thanks,
Vinod

Compatibility issues between R12 and report builder 2.5

Hi,
I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
Thanks
peopsquik

As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

Cinima Display fades Between blue and the deskop after my Mac Pro sleeps

Hello all,
I really hope someone can help. I have a Mac Pro Running 10.5.4 and a 23 Inch Cinema Display. When I wake my machine from sleeping the desktop appears then about a second later the screen fades blue. After a second of blue it fades back to the desktop. This continues on forever and the machine is unusable until I cut the power and restart the machine.
The same issue will happen if the resolution on the monitar is changed.
I have tried to reset the pram, reset the smc, take out the graphics card and then place it back. I switch the cable from port one to two of my graphics card. I also reinstalled leopard as well as downgrading back to tiger.
When I hook the monitor up to my macbook it sleeps and awakes fine.
Finally this morning I realized that if I discounted using the monitors built in hub then the screen will awaken without issue.
Any idea's? Has anyone had a similar issue?

Hi there. It could be one of your drives is actually defective and causing I/O to slow down to a crawl. To verify this, try inserting the DVD that came with your Mac Pro and restarting the machine while holding down the 'C' key. This will boot up the machine off the DVD and bypass your hard disks. If it boots quicker there could be a problem with the drives or something else.

Display alternates between dark and bright

I have several issues but I suspect somehow they are all related as they all began about the same time, within about an hour of each other, which was maybe a week ago.
Periodically, my display slowly cycles between dark and bright. Sometimes the display will suddenly go to sleep on it's own, usually after a period of about 20 seconds of me not doing something and when I wake it up the display is quite dim. Other times the computer goes to sleep (not just the display) requiring me to log back on. I use password for startup. I open the display settings after log-on and the brightness slider has somehow moved way over to the dark end (left). I slide it up to where I like it and soon it does it again all by itself again after a very short period of inactivity. I have noticed that if I leave the brightness control alone (dim) without readjusting it it seems to take longer for the other issues to develop. I would normally place the brightness slider just under half way up. My sleep time settings are currently: computer - 1 hr, display 15 min. That is plugged in which is pretty much the only way I ever seem to use it ... plugged in.
Another issue is an occaisional rapid beeping. It's the same low beep that you hear when you try to do something stupid and the computer is telling you you've made an error. The difference is this is a long, unending string of rapid beeps; I'd estimate maybe 15 - 20 beeps per second. The sound does not stop. I have to mute the speakers to shut it up. I have not yet been able to determine a recognizable pattern of common variables for when this happens. The other day when the computer went to sleep by itself and I woke it and tried to input my password and I saw that the input bar was filled with black balls as if it was remembering my password which I did not like but when I hit enter the logon dilaog box shook, the entry field emptied and refilled on it's own. I held the backspace key for several seconds and nothing seemed to happen. I used shift/command/arrow to highlight the entire string and deleted it but as soon as the characters were deleted I saw the input line quickly fill back up again one ball at a time at roughly the same rate as the beeps. Then it occured to me that the beeps were similar to those you would hear if you held a key down and filled an entire entry field with a hundred of a particular character and was still holding down the key long after the field was full. My first thought was that a key was stuck down. Not so. Each and every key is free to move and functions normally.
Last night I closed the lid to put the computer to put it sleep before I went to bed. About 3 hours later I was awakened by the sound of the rapid beeping. I got out of bed and went to the computer and opened the lid to find the same input line black balls issue but this time it was accompanied by the beeping and the display was also cycling between bright and dim. As it was the middle of the night I killed the machine by holding down the power button and forcing a shutdown. This evening I decided to do the upgrade from 10.9.1 to 10.9.2 hoping that might help but it did not. I have not heard the beeping since the upgrade but the display is still cycling, which was the first thing I noticed when all of this began.

Turns out it may have been sofware issue. I suspected software anyway because rebooting could temporarily cure it. I spoke to an Apple Service and Support person on the phone. She went through a fairly lengthy process with me to evaluate the machine and determine if it was hardware or software related. The results of those steps did not lead her to any concrete conclusions but she was able to hear the beeping issue happening in real time. She guided me through the steps of O/S recovery and now several hours later the machine appears to be functioning as it is supposed to. Typically the issue(s) would show up after maybe twenty minutes or a half hour after a hard boot. I am to monitor the thing for the next week or so watching for any signs of the issues slowly returning.
Here's keeping my fingers crossed.

Sync issues between Mac and Mobile Me

Hi all,
I'm having issues syncing between MobileMe and my Macbook Pro. It used to work perfectly, but I haven't been able to get it to sync since early August. All the changes I make between my iPhone and MobileMe work fine, but they just wont update with any changes I make on my Macbook. Equally, changes made on iPhone or MobileMe don't show on my laptop anymore.
I've tried force syncs and resetting sync data (and transferring info from MobileMe) but none work. Is there anything else I can try?
Thanks,

You should ask in the MobileMe forums as this forum (iSync) has nothing to do with syncing Macs to MobileMe.

Display issues, Mac Pro

Just got my Mac Pro, and it has a pretty frustrating problem. When waking up from sleep the display (ACD 20") stays black and there's no way of getting a signal without rebooting. If that wasn't annoying enough, the same thing happens about 7-8 times out of 10 when I reboot. The computer boots just fine, but the display stays off. I've tried with other displays and get the same problem.
This is a list of the things I've tried so far:
1. Called Apple Support, who wanted me to send it for a repair which seems kinda sad seeing as I've only had it for a few days. No replacement will be given though. Unfortunately Apple in Europe aren't as generous with the 14-day DOA period as they are in the US.
2. Reset PMU/PRAM/NVRAM (sometimes brings the display back up, sometimes not).
3. Removed and reinserted graphics card.
4. Removed and reinserted memory sticks.
5. Tried a new set of memory sticks.
6. Reinstalled OS X, which is the first thing I do whenever I get a new Mac anyway.
7. Tried different monitors with both ports on the graphics card.
8. Ran Apple Hardware Test without any errors registering.
Anyone have any suggestions of anything else I should try, or should I give up on this one and get it fixed?
Thanks
Mac Pro Mac OS X (10.4.8) Dual 2.66Ghz, 1GB RAM, Nvidia 7300

I'm seeing a similar problem, though short-term sleep
is not an issue. It occurs after the system has
slept for multiple hours--overnight in particular.
Two displays, and Apple 30" and a Sun 24", attached
to an X1900 video card, Mac Pro 3GHz. A picture and
writeup in more detail are here:
http://diglloyd.com/diglloyd/blog.html#20070301MacProV
ideoProblems
I've updated the Mac pro firmware, installed all the
system updates, etc.
I think it's an ATI X1900 problem; my write describes
a similar problem on the G5 Quad with the ATI X1900
G5 edition.
Mac Pro 3GHz Mac OS X
(10.3.8)
PowerMac G5 dual 2.5 GHz Mac
OS X (10.4)
I have the same problem with Geoforce 7300 GT and MacPro!

Alignment Issues between dreamweaver and browser

Hi
Hoping someone can help, i'm trying to learn how to make
better sites with advanced tools like apDIV's but seem to be
running into an alignment issue. When I make the html file in
dreamweaver I seem to have to off set the images and div tags
inorder for the site to show up aligned properly in firefox,
explorer, etc. I'm thinking there might be a problem in the actual
code causing this but am not good enough yet to find it or the
problem, any ideas or guidence would be greatly accepted. below if
the links work is the difference I see between dreamweaver and when
its launched in a browser.
DreamweaverScreen
BrowserScreen

> over a centered frame
You are not using frames - that's a table.
Yes - there's a way to do this, but it will involve your
working in code.
Make your page left aligned by removing any centering.
Then position your layer so that it is properly located over
the table.
Change this -
</head>
to this -
<style type="text/css">
#wrapper { width:760px; margin:0 auto;position:relative; }
/* 760px will display on an 800px screen maximized browser
window without */
/* horizontal scrollbars. */
</style>
</head>
(you may need to adjust this width so that it's consistent
with the width of
your centering table)
change this -
<body ...>
(the ellipsis represents any other attributes that might be
mentioned in the
body tag, and SHOULD NOT BE INCLUDED EXPLICITLY!)
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -

</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vinx21" <[email protected]> wrote in
message
news:ge9t3e$92s$[email protected]..
> thanks for the help osgood, I see now what my problem is
and am just
> wondered
> if there was a way to place the absolute layer over top,
in the right
> position,
or will have i have to remake one of the elements a
> different way???
>
> thanks again, dave
>

Triple Display issue Mac Pro 4.1, GTX660, GT120.

Hi guys.
I have a mac pro 4.1 with a GTX 660 and a stock GT 120.
The 660 has 2 x DVI, 1x HDMI, 1x Displayport
The GT 120 has 1x MiniDp 1x DVI.
I have both NVIDIA drivers and stock drivers.
I've recently received a Dell U3011 2560 x 1600 to compliment my 2 20 inch 1600 x 1200 monitors.
I plan to have the 20's flank the u3011 in portrait on either side to create a PLP setup.
The problem is that I can't get them all to work together.
Most of the time the monitor on the left isn't recognised (in system information it is described as color LCD display) and displays a resolution of 480 x 640. The other two monitors will work fine.
If I fiddle with the video outputs on 660 and 120 (mix them up, use adapters etc) I can get all three monitors to display their correct resolution, But if the computer sleeps or is restarted it goes back to low resolution on one monitor and doesn't display an image at all and goes to sleep.
The U3011 is always recognised at its correct resolution via displayport.
Other two are connected to DVI1 on the 660 and the DVI on GT120
Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
What it is at the moment:
What it was before I had the 30 and was using a 24:
I'm pretty sure its not a monitor issue, as the issues vary between monitors (depending on which is plugged in where)
I'd prefer to resolve this issue by running everything off the 660, allowing me to remove the GT120.
Any help would be much appreciated.
Cheers.

I'm pretty sure its not a monitor issue, as the issues vary between monitors
I'm pretty sure this is a display and adapter and interface problem, especially when the name(s) of your display(s) show up wrong after sleep.
The Mac uses one display driver that is highly parameterized. The parameters to be used are set by sending a query to the display for its name and capabilities. This query is sent on the secondary digital data channel, and is sometimes referred to as EDID data.
Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
When the name of the display is not correctly reflected in the name of its Display Preferences pane, that is a direct indication the display-adapter-cable-display part of the chain "dropped the ball" in resounding to the Mac's query for capabilities.
Adapters that do not pass the EDID data through, and displays that do not answer when queried for their name and capabilities are the primary source of problems. For example, TV sets that are not "paying attention" to the secondary data channel, and therefore do not answer the query, drive Mac users crazy.
The query is sent in response to four different events:
• System Startup
• wake form sleep
• cable insertion at the Mac-end (not necessarily at the Display-end)
• The use of the Option-Detect_Displays button in Displays Preferences window

Acrobat v6 Pro and Reader 9 are fighting

My Contact
nha khoa
So one of my users is in a different state, so I can not get my hands on his laptop. But his issue is as follows.
Using IE 7, whenever he opens a PDF it opens Acrobat v6 Pro, but gives an error saying it needs Acrobat v8 or 9. He has v9 Reader loaded, but IE will not use it. In FF we told it to open the PDF extension with Acrobat Reader 9, and this has solved the issue there.
FYI, opening a PDF directly from his computer uses v9 reader.
What have I done so far?
1) Had him change the Windows Default Application to open PDF's with v9.0 Reader. - This did not work
2) Had him change the default to v6 Pro then back to v9 Reader (maybe it just needed a reset) - still no good.
3) he had installed 9 reader then 6 Pro, I had him uninstall and then reinstall v9 --- issue not resolved.
Any ideas would be appreciated.
Thanks,
-MF

The reason that your user gets odd behavior is because Acrobat 6 and Reader 9 use different files to open the PDF within the Internet Explorer web browser. Acrobat 6 uses an ActiveX control name "PDF.ocx". Reader 9 uses a DLL called "AcroPDF.dll". When you have both applications installed, which I believe is against Adobe's recommendations, there is a conflict and hence the error message.
On the other hand, FireFox uses the old Netscape plug-in "nppdf32.dll" so there is no co-relation in the web browser preference setting for FireFox.
Sanctus

Display issues between Pro and reader

Similar Messages

Maybe you are looking for