Display Mode - Module Pool

Hi Friends,
Need help in Module Pool,
when button click want to display screen in Display Mode only.....

Hi Sharavan,
I hope you want to achieve the Toggle Display Functionality. To achieve this you have perform this following steps:
1. Define the names Properly for each of the individual Screen Elements. Like for Button you can do BTN_01.. etc etc...
2. In the PBO Module define a Module like MODULE screen_settings. In this you will run the following code:
LOOP AT SCREEN.
IF SCREEN-NAME = 'BTN_01'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
For a group of BTNs or Text Elements you can form a GROUP and can Enable and Disable all at once.
3. The Next step is the handling of the Table Control.In the PBO event there you will have the LOOPing the Table control.
There inside the loop place a Module and enable and disable each and individual rows.
You must keep a central Instance from where you can check whether you want the screen elements in DISPLAY/CHANGE mode.
Hope this will help.
Thanks,
Samantak.

Similar Messages

Tab in Tabstrip Control in display mode (Module Pool)

Hi friends,
I am trying to give authorization based on sy-uname, in runtime based on uname the particular tab should be opend in a display mode and some in change mode. please help me out in this
Edited by: shravan sonayila on Aug 12, 2008 8:06 AM

Hi,
when u creating tabstrip,while defining each tab in tabstrip , u have to
create one subscreen for each tab.i think u want one tab for display
mode and one tab for edit mode. if u want this way , in one tab try to
give fields all in invisible mode this for display mode and goto second tab if u want all visible only keep like that only other wise u have create geoups.when u press enter ,groups will be change.it means visible , invisible modes.
u have to give logic for screen in pbo.
*&      Module STATUS_0300 OUTPUT
      text
module status_0300 output.
set pf-status 'GUI_300'.
set titlebar 'TITLE_300' with v_title.
if i_aktyp = 'H'.
    if temp_flag = 1.
      loop at screen .
        if screen-group1 = 'GP2'.
          screen-input = 1.
          modify screen .
        else.
          screen-input = 0.
          modify screen.
        endif.
        temp_flag = 0.
      endloop.
    else.
      loop at screen.
        if screen-group1 = 'GP1'.
          screen-input = 1.
          modify screen.
        else.
          screen-input = 0.
          modify screen.
        endif.
        temp_flag = 1.
      endloop.
    endif.
elseif i_aktyp = 'V'.
    loop at screen.
      if screen-group1 = 'GP1'.
        screen-input = 1.
        modify screen.
      else.
        screen-input = 0.
        modify screen.
      endif.
    endloop.
endif.
endmodule.                 " STATUS_0300 OUTPUT
Try to give this logic.
Regards,
Ramya

Icon display in Module pool screen not visible to some users

Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
Sumith

As I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell

Problem in dropdown list display in module pool

Hi All,
   One of the fields of my module pool program is a drop down list. I am able to populate the values to the list but when i select any value, it doesnot come to the field.
Can any one help me out in this ?
Thanks in advanve ...
Ranjita

hi Ranjitha,
Ensure that you are doing the following activities:
1-> in the field attributes, you have mentioned FCODE.
2-> use function module DYNP_VALUES_UPDATE to set the selected value to the field.
sample code:
put selected value into a dynpro field--
     IF dy_field-fieldvalue NE l_seark.
       REFRESH dy_field.
       APPEND dy_field.
       CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
                 dyname               = sy-cprog
                 dynumb               = sy-dynnr
            TABLES
                 dynpfields           = dy_field
            EXCEPTIONS
                 invalid_abapworkarea = 1
                 invalid_request      = 2
                 no_fielddescription = 3
                 undefind_error       = 4
                 others               = 99.
Hope this helps,
Sajan Joseph.

Alv list in module pool programming

hai abapers ,
i developed an alv grid display in module pool programming,my prbm is when i click on list button in my prm its displaying list n coming back to main screen if again i click on list button list is diplaying twice like this so on,how many i click on list button its displaying each that many times
thank u

It seems you have coded to create the field catalog also at the click of list display.Field catalog should be created only once.When you click on list display, it should only call the REUSE... fm but not the creation of fieldcatalog also.This will result in creation of a new fieldcatalog in addition to the exixting one.

List Box Problem In MODULE POOL PROGRAM(EDIT MODE)

I Have Developed A MODULE POOL PROGRAM ,
It Basically Consists Of CREATE EDIT and DISPLAY Modes.
CREATE MODE:
When I am Creating For Example FORM NO 1,it is having Fields With drop down list box with values
A,B and C. if I Choose A then That form will Get Created With A value and Form 1 will be created.
EDIT MODE:
The same form If u want to edit In EDIT Mode ,it is displaying value A and it Showing the list box in the fillowing Manner.A,B,C,and A.(This is what the problem I am Facing Know).It Is Displaying the value two times.How to Avoid this ,PLs Help me in this regard.
Thaks & Regards,
Anuradha.

Where ever you are populating the List Box, write a REFRESH statement just before that.
Means Refresh the old content and add new content

Module-pool edit mode to non edit mode

Dear friends ,
I am working with module-pool, In that when i enters value that field should become Visible mode   and should not allow user to edit amount Please guide me .
thanks & regards

Hi try this way...
PROCESS BEFORE OUTPUT.
MODULE status_<screen>.
* Table control for OUTPUT
LOOP WITH CONTROL <TableControl>.
    MODULE Modify_screen.
ENDLOOP.
MODULE Modify_screen OUTPUT.
* Table control reading values from input screen & displaying on screen
READ TABLE <Internal table>    INDEX <Table control >-current_line.
* Logic for screen Display Mode when User enters data
IF <ITAB>-FIELD is not Initial.       "This means User has enterd Data for the Particular Row
    LOOP AT SCREEN.
      IF screen-name = 'ITAB-FIELD'.       "Passs the table/WorkArea with Field name to make field Display mode
        screen-input = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
ENDMODULE.
Prabhudas

Module Pool Text field should be display Bold

Hi Freinds,
I have created Module Pool.
1. My requirement is Text Field display Bold & I want to Change of Text Size.
2. After executing Menu bar option are Disable mode, I want in Enable mode.
Thx in Advance.

1) By default in PBO you can see 'MODULE status_0001 OUTPUT'
2) if you double click on that it will take you to enable the PF-STATUS (please check the below code).
3) If you double click on PF_0001 then menu painter will be opened to create status.
4) For more information[ click here.|http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801ce8454211d189710000e8322d00/frameset.htm]
*&      Module STATUS_0001 OUTPUT
*       text
MODULE status_0001 OUTPUT.
SET PF-STATUS 'PF_0001'.
SET TITLEBAR 'TB_0001'.
ENDMODULE.                 " STATUS_0001 OUTPUT
regards,
~Satya

Module Pool - Table Control - Data not getting displayed in Control

Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
        SELECTED TYPE C,
        TEXT TYPE DPR_CAUSE_T-TEXT,
      end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA:       lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
   TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
   MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.

Hi Sonali,
           When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed

How can i display the success msg using module pool

Hi frnds,
I want to display the error mesg or success msg in a dialogbox with ok button through module pool,
Pls help me any one.
Thanks in advance.

Hi,
Check this example in SAP:
DEMO_MESSAGES -
> This is a good example of displaying messages given by SAP.
For more information on messages please visit this link:
http://help.sap.com/saphelp_nw04/helpdata/en/91/dec863880411d194cb0000e8353423/content.htm
This will tell you the complete status of each messages in the ABAP with its displaying position on the screen.
May this information helps you.
Thanks
Deepak Sharma

How to display LONG TEXT STRING in Module Pool Screen ?

Hi Experts,
I want to display long text string, on screen designed through module pool(SE51). I tried to display through input/output field , but it displays it in SINGLE LINE and i have to scroll all through to view all string.
I want to display it in rectangular format . It doesnt allow me to set HEIGHT of component.
Please provide solution.
Thanks in advance.
Regards
Deepak

This is the program where u can get the WA_THEAD from other program like report and trying to display and modifying that text. U can do instead of WA_THEAD u can generate here itself and use also
*& Module pool       ZMP_LTEXT                                         *
PROGRAM ZMP_LTEXT                               .
TABLES: STXL.
*&      Module STATUS_9000 OUTPUT
MODULE STATUS_9000 OUTPUT.
CONSTANTS:line_length type i value 132.
DATA:g_editor type ref to cl_gui_textedit,
     g_editor_container type ref to cl_gui_custom_container,
     CONT1 type scrfname value 'CONT1',
     g_repid like sy-repid,
     g_ok_code like sy-ucomm,
     g_mytable(132) type c occurs 0,
     g_mycontainer(30) type c ,
     v_result(256) type c,
     g_head like thead,
     it_line type table of tline with header line,
     wa_stxl type stxl.
DATA : BEGIN OF IT_THEAD1,
       ICON TYPE ICON-ID.
       INCLUDE STRUCTURE STXL.
DATA : END OF IT_THEAD1.
DATA : IT_THEAD LIKE TABLE OF IT_THEAD1,
       WA_THEAD LIKE LINE OF IT_THEAD.
IMPORT WA_THEAD FROM MEMORY ID 'ABCD'.
select SINGLE * from STXL into wa_stxl
                 where tdname = '00006000156500000002'.
SELECT SINGLE * from STXL into wa_stxl
                  where tdname = WA_THEAD-TDNAME
                  AND TDID = WA_THEAD-TDID
                  AND TDOBJECT = WA_THEAD-TDOBJECT
                  AND TDSPRAS = WA_THEAD-TDSPRAS.
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD EXIST' TYPE 'E'.
ENDIF.
MOVE-CORRESPONDING WA_STXL TO G_HEAD.
SET PF-STATUS 'STATUS'.
SET TITLEBAR '001'.
if g_editor is initial.
     CREATE OBJECT G_EDITOR_CONTAINER
       EXPORTING
        PARENT                      =
         CONTAINER_NAME              = CONT1
        STYLE                       =
        LIFETIME                    = lifetime_default
        REPID                       =
        DYNNR                       =
        NO_AUTODEF_PROGID_DYNNR     =
       EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
         others                      = 6.
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
     CREATE OBJECT G_EDITOR
       EXPORTING
        MAX_NUMBER_CHARS       =
        STYLE                  = 0
   WORDWRAP_MODE          = cl_gui_textedit=>wordwrap_at_fixed_position
for to fix number of characters in row to 132 characers
         WORDWRAP_POSITION      = line_length
         WORDWRAP_TO_LINEBREAK_MODE = cl_gui_textedit=>true
for the word to break to next line if it dont fit in line
        FILEDROP_MODE          = DROPFILE_EVENT_OFF
         PARENT                 = G_EDITOR_CONTAINER
        LIFETIME               =
        NAME                   =
       EXCEPTIONS
        ERROR_CNTL_CREATE      = 1
        ERROR_CNTL_INIT        = 2
        ERROR_CNTL_LINK        = 3
        ERROR_DP_CREATE        = 4
        GUI_TYPE_NOT_SUPPORTED = 5
         others                 = 6 .
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
REFRESH g_mytable.
     MOVE: WA_THEAD-TDNAME TO STXL-TDNAME,
           WA_THEAD-TDID TO STXL-TDID,
           WA_THEAD-TDOBJECT TO STXL-TDOBJECT,
           WA_THEAD-TDSPRAS TO STXL-TDSPRAS.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT                        = SY-MANDT
      ID                            = wa_stxl-tdid
      LANGUAGE                      = wa_stxl-tdspras
      NAME                          = wa_stxl-tdname
      OBJECT                        = wa_stxl-tdobject
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
IMPORTING
    HEADER                        =
    TABLES
      LINES                         = it_line
EXCEPTIONS
    ID                            = 1
    LANGUAGE                      = 2
    NAME                          = 3
    NOT_FOUND                     = 4
    OBJECT                        = 5
    REFERENCE_CHECK               = 6
    WRONG_ACCESS_TO_ARCHIVE       = 7
    OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_LINE INTO V_RESULT.
   APPEND V_RESULT TO G_MYTABLE.
ENDLOOP.
CALL METHOD G_EDITOR->SET_TEXT_AS_R3TABLE
   EXPORTING
     TABLE           = G_MYTABLE
   EXCEPTIONS
     ERROR_DP        = 1
     ERROR_DP_CREATE = 2
     others          = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   endif.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'SAVE'.
     CALL METHOD G_EDITOR->GET_TEXT_AS_R3TABLE
      EXPORTING
        ONLY_WHEN_MODIFIED     = FALSE
        IMPORTING
          TABLE                  = G_MYTABLE
        IS_MODIFIED            =
      EXCEPTIONS
        ERROR_DP               = 1
        ERROR_CNTL_CALL_METHOD = 2
        ERROR_DP_CREATE        = 3
        POTENTIAL_DATA_LOSS    = 4
        others                 = 5
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
LOOP AT G_MYTABLE INTO V_RESULT.
   APPEND V_RESULT TO IT_LINE.
ENDLOOP.
CLEAR V_RESULT.
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                = SY-MANDT
        HEADER                = G_HEAD
        INSERT                = ' '
        SAVEMODE_DIRECT       = 'X'
      OWNER_SPECIFIED       = ' '
      LOCAL_CAT             = ' '
    IMPORTING
      FUNCTION              =
      NEWHEADER             =
      TABLES
        LINES                 = IT_LINE
    EXCEPTIONS
      ID                    = 1
      LANGUAGE              = 2
      NAME                  = 3
      OBJECT                = 4
      OTHERS                = 5
   IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE TO SCREEN '0'.
*CALL SCREEN '0'.
WHEN OTHERS.
ENDCASE.
*G_OK_CODE = SY-UCOMM.
*CLEAR SY-UCOMM.
ENDMODULE.                 " USER_COMMAND_9000 INPUT

How to display image and data in module pool screen?

Hi,
I want to display image and relevant data besides the image in module pool screen, I am using docking container to display the image.
Actually I am able to display image or data any one but not both.
one more thing I want to display multiple images and their data.
Please suggest some one if you have any idea.
Regards,
Dileep.

You can try below way, I have used in report.
DATA: gc_docking              TYPE REF TO cl_gui_docking_container, "#EC NEEDED "Docking Container
       gc_split                 TYPE REF TO cl_gui_easy_splitter_container, "#EC NEEDED "Splitter
       gc_top_container         TYPE REF TO cl_gui_container, "#EC NEEDED "Top Container
       gc_bottom_container      TYPE REF TO cl_gui_container, "#EC NEEDED "Bottom Container
      gc_document              TYPE REF TO cl_dd_document, "#EC NEEDED "Document
       gc_events                TYPE REF TO lcl_event_class, "#EC NEEDED " Local Event Class
       gc_grid                  TYPE REF TO cl_gui_alv_grid, "#EC NEEDED " ALV Class
" Creating Docking
CREATE OBJECT gc_docking
       EXPORTING
         ratio = c_95.
     IF sy-subrc EQ 0.
* Splitting the Docking container
       CREATE OBJECT gc_split
         EXPORTING
           parent        = gc_docking
           sash_position = c_10 "Position of Splitter Bar (in Percent)
           with_border   = c_1. "With Border = 1 Without Border = 0
     ENDIF.
*   Placing the containers in the splitter
     gc_top_container = gc_split->top_left_container .
     gc_bottom_container = gc_split->bottom_right_container .
*   Creating Grid
     CREATE OBJECT gc_grid
       EXPORTING
         i_parent = gc_bottom_container.
   ELSE.
* Background job handling
     CREATE OBJECT gc_grid
       EXPORTING
         i_parent = gc_docking.
   ENDIF.
*   Creating the document
   CREATE OBJECT gc_document
     EXPORTING
       style = 'ALV_GRID'.
Regards,
Sameer

How to display logo in module pool screen

Hi,
I need to display a logo in the screen of module pool programming. I have already imported the logo image using transaction OAER.
Please suggest how to display the image in the screen..
Thanks and Regards,
Sayan Ghosh

You can show the image using the calss
CL_DD_DOCUMENT
For reference how to use the class
check the example program
DD_ADD_PICTURE

How to display a screen as Popup Dialog box in Module Pool

Hi All,
I have a requirement to display a popup dialoge box into module pool.
i need to display a screen as a popup on the current screen on a button click.I have developed a screen and in atribute tab i have defined the screen type as modal dialog box but it is displaying previous screen screen is hide i want to display on the same screen as a popup.
Thanks
Narendra

Hi Narendra,
Try to trigger the popup once it is done with the previous action might be anything.
i have shown one sample code where after i click on save button when the data is saved successfully
after that it has to trigger me a popup asking for conformation for the next action.
A small piece of code
INSERT INTO ZORMD1 VALUES WA_ZORMD1.
    IF SY-SUBRC = 0.
      G_LOCAL1 = 0.
      MESSAGE S000. " Data saved successfully and immediately call the popup
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
        EXPORTING
DEFAULTOPTION = 'Y'
TEXTLINE1 = 'SUCCESSFULLY SAVED'
          TITEL = 'POPUP FOR conformation'
         START_COLUMN         = 25
         START_ROW            = 10
        CANCEL_DISPLAY       = 'X'
       IMPORTING
ANSWER = G_PRINT
IF G_PRINT = 'J'.
PERFORM PRINT_OUT.
ENDIF.
Do the modification according to your requirement.
Cheers!!
VEnk@

Module pool domain text display info req?

hi
i had an req to show a filed MATNR on a screen in module pool pgm,there shd be a i/p filed for material,user can select the material from the list of available materials,along with the test to be displayed for the filed next to material nos.
the list of mateiral is based on the login user name.
i am able to display the material list,but text is not coming.
pls tell me how to show the text next to matnr no. in list.
i had used the code:
loop at itab_carrid.
    clear:text.
    CALL FUNCTION 'ADS2KIPBRO_GET_DOMAIN_TEXT'
      EXPORTING
        E_TABLE          = 'MARA'
        E_FIELD          = 'MATNR'
        E_VALUE          = itab_carrid-matnr
      IMPORTING
        I_TEXT           = text
      EXCEPTIONS
        ILLEGAL_INPUT    = 1
        DOMAIN_NOT_FOUND = 2
        OTHERS           = 3.
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    move text to itab_carrid-text1.
    modify itab_carrid transporting text1.
endloop.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MATNR'
      value_org       = 'S'
    TABLES
      value_tab       = itab_carrid
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.

hi
tell me,if i made a i/p field on screen from the data variable declared in my program
like :data:actvt(3) type c.
than on layout of screen:I/P filed-actvt.
now i want to provide the f4 to this.i had written the POV for the filed,the data is there in itab,but not poping out.
code:PROCESS ON VALUE-REQUEST.
FIELD ACTVT MODULE create_dropdown_box.
TYPES: BEGIN OF type_carrid,
         actvt(3) type c,
         text1(40) type c,
       END OF type_carrid.
DATA: itab_carrid type Type_carrid occurs 0 with header line.
   itab_carrid-actvt = '001'.
    append itab_carrid.
    itab_carrid-actvt = '002'.
    append itab_carrid.
    itab_carrid-actvt = '003'.
    append itab_carrid.
    itab_carrid-actvt = '004'.
    append itab_carrid.
    itab_carrid-actvt = '005'.
    append itab_carrid.
    itab_carrid-actvt = '006'.
    append itab_carrid.
    itab_carrid-actvt = '007'.
    append itab_carrid.
endif.
clear:itab_carrid.
loop at itab_carrid.
    clear:text.
    CALL FUNCTION 'ADS2KIPBRO_GET_DOMAIN_TEXT'
      EXPORTING
        E_TABLE          = 'YLOGON1'
        E_FIELD          = 'ACTVT'
        E_VALUE          = itab_carrid-actvt
      IMPORTING
        I_TEXT           = text
      EXCEPTIONS
        ILLEGAL_INPUT    = 1
        DOMAIN_NOT_FOUND = 2
        OTHERS           = 3.
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    move text to itab_carrid-text1.
    modify itab_carrid transporting actvt text1.
endloop.
clear:itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ACTVT'
      DYNPNR          = SY-DYNNR
      DYNPPROG        = SY-REPID
      value_org       = 'S'
    TABLES
      value_tab       = itab_carrid
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
plz tell me how to pop out this help in screen.

Display Mode - Module Pool

Similar Messages

Maybe you are looking for