Display on Asus screen under windows distorted

Hi there,
I have just bought an Asus VW222U screen and connected it to my MacBook Pro. On the Macbook I am running Mac and Windows. On the Mac platform the picture on the Asus is fine but not on the Windows platform. Everything displayed on the Asus screen is distorted. I have spoken to Apple, Microsoft and Asus and they all say it's an apple thing yet apple said it's a Microsoft problem...I am lost...can anyone help?

Nigel,
I've investigated this issue further, and talked to some of our
development staff.
There are three known issues here:
1. regular menus are not right justified if the client is
in the window to the right of the deafult monitor.
2. Dockable windows cannot be freely positioned
3. Context menus sometimes appear on the wrong monitor.
issue #1 is fixed in 1.3.1_04
isses #2 and #3 are not JDK related, and are now fixed in the 9.0.3
builds.
Unfortunately, we do not certify upgrading the JDK to 1.3.1_04 - there
are some other display-related issues that this drop causes, and we can't
risk product destabilization at this stage.
However, I do have a workaround for you for #1.
The issue only occurs if the secondary monitor is placed to the right
of the primary monitor. If you use the windows control panel (right click settings on
desktop) and change the primary monitor, then the problem goes away.
Hope this satisfactorily resolves your dual-head problems.
Karl

Similar Messages

Connection to external display does not work under windows bootcamp, with a thunderbolt to vga adapter.

Hello guys, after searching a lot in the forum for an answer to this, I could not find a solution so this is the reason for this post.
I have a Macbook Pro (early 2011 I think) running MacOSX Lion and I have installed Windows 7 64-bit through bootcamp (version 4.0).
Everything works fine except that I cannot connect my external display through my thunderbolt-vga adapter.
The external monitor shows only the boot screen of windows (the one with the windows logo) and then, when I get into the login page it goes blank.
After reading the forum, I have done several things in order to fix this problem such as:
Restarting the macbook with the thunderbolt device connected to it.
Updated to the latest ATI drivers through bootcamp.
Removed the graphics driver and re-install it again.
I have tried to identify the external monitor through windows 'screen resolution' tool (attached photo).
but still no luck.
Does anyone have any idea on what else I could do in order to fix this? By the way, I find it very frustrating that Apple does not have a stable solution to the problem with devices that are connected to the thunderbolt port.
Thank you in advance

and here is the attached screenshot

Running two displays from MBP Retina under windows

I'm looking at purchasing a MBP Retina 13". I have two external monitors that can accept HDMI and DVI (neither can do displayport). Some software that I run requires me to sometimes boot into windows. Under windows 7, can I output a DVI signal from each of my thunderbolt ports? Do I just need to run two mini-displayport to DVI adapters? Or is not that simple? (both external monitors are 1900x1080)

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

JDeveloper JDEV9i_902 menus do not appear correctly on multi-screen under Windows 200

Using JDeveloper on Windows 2000 via extended desktop with Matrox dual-head support and Windows extended multi-screen support menus in JD are displayed biased towards the primary desktop screen, this behaviour makes using the product quite difficult in this environment.

Nigel,
I've investigated this issue further, and talked to some of our
development staff.
There are three known issues here:
1. regular menus are not right justified if the client is
in the window to the right of the deafult monitor.
2. Dockable windows cannot be freely positioned
3. Context menus sometimes appear on the wrong monitor.
issue #1 is fixed in 1.3.1_04
isses #2 and #3 are not JDK related, and are now fixed in the 9.0.3
builds.
Unfortunately, we do not certify upgrading the JDK to 1.3.1_04 - there
are some other display-related issues that this drop causes, and we can't
risk product destabilization at this stage.
However, I do have a workaround for you for #1.
The issue only occurs if the secondary monitor is placed to the right
of the primary monitor. If you use the windows control panel (right click settings on
desktop) and change the primary monitor, then the problem goes away.
Hope this satisfactorily resolves your dual-head problems.
Karl

How to disable T410s touch SCREEN under windows XP?

Hi,
For the life of me i can't figure out how to disable the touch SCREEN (not to be confused with the touch PAD) - can someone please advise? I'm running Windows XP SP3. I've searched all the configuration settings I could think to check, google, these forums, etc.
Thanks in advance.

hey rreist,
the T410s does not have a touchscreen. are you referring to a different unit ?
do provide the MTM [machine type model]:
To locate MTM -
http://support.lenovo.com/en_US/FindProductNumber.page#find
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Display Not Filling Screen After Windows 10 Upgrade

After performing Windows 10 upgrade the display on the monitor has a one inch vacant area around the entire display. The resolution is set correctly to 1920 x 1080. There is no way of extending it through the display settings in the PC. The upgrade was made from Windows 7. I have checked via HP and there is no Windows 10 driver available for this monitor even though Microsoft qualified all software and hardware compatible for the upgrade. The adapter is version 8.970.100.9001, dated 1/13/15. I don't know if the graphics card, ATI Radeon HD 4350 connected via HDMI, has any affect on this problem. I would appreciate any help.

I have the same problem with this monitor on using my HP Pavilion dv6 with an ATI Mobility 4200 series chip. The problem is caused by the driver inserting overscan into the picture. I can't find a way to tell Windows 10 to remove the overscan, and the Catalyst Control Center is not compatible with Win10 either. I wonder if this monitor is reporting itself as a "TV" and that's the issue: if so, a driver update could fix it.

Why is Firefox 6.0 very very slow on my new laptop (Asus G74) under Windows 7 x64 ?

Hello everyone ! Today I've received my new laptop. An powerfull G74. The first thing I have done was to install Microsoft updates. And then, install Firefox. And then.. waited about 20 sec for beeing able to type something in the url bar. Same thing about tabs. Open a new tab take about 10 secs. I Don't know what I need to do to have the same speed as on my old laptop with Firefox... :/

Hope this helps a bit
https://support.mozilla.com/en-US/kb/firefox-takes-long-time-start-up?s=slow&r=1&as=s#os=mac&browser=fx8

Black screen in Windows 8.1 on Late 2009 27" iMac

Hi,
My Late 2009 27" iMac i7 will not allow the display to turn on under Windows 8.1. It's not just black, its as though its powered off. This is some kind of a software problem. I am certain of this because I ran Windows 8.1 just fine since its release (10/17/2013). Hoestly, I ran it for months without a problem. I think it was an upgrade install over Windows 8 and not a clean install. Anyways, last week I upgraded to an SSD and needed to re-install Win 8.1. Now the display won't turn on. It works fine when you first boot it up after the setup runs, then a windows chime sounds and the screen goes blank and never turns on again. If you enable RDP before this happens you can still access the computer. I have re-installed Windows 8.1 and also I have tried BootCamp 4.0.4033, 5.0.5033, and 5.1.5621. None of them have enabled the display. Nor has the vanilla driver from AMD/ATI. I am at a complete loss as to what to do. My only hope is there are a handful of other users with this model of iMac who also have this issue and have solved it. If I ever find the solution you can count on me writing it in detail here in this thread or linking to a thread that solves it.
Thanks,
sr.matto

Summary: The ATI Mobility Radeon HD 4850 and other "legacy" graphics cards are not yet supported by AMD/ATI on Windows 8.1.
If you are disatisfied with a perfectly serviceable series of video cards being dropped from support make yourself heard: http://emailcustomercare.amd.com
---Details---
Okay after some pretty exaustive research I have found out a few things.
First, that AMD/ATI has decided to not include several series of "legacy" video cards in their support for Windows 8.1. This support may come in the future. There are conflicting reports about wether or not this is happening.
Second, there is a small community that is devoted to unofficial modified drivers that are supposed to allow legacy cards to be used on Windows 8.1. -> http://forums.guru3d.com/showthread.php?t=372799. I had no success whatsoever with these drivers, even on a clean install of Windows 8.1. I did get the drivers to install, but no games could start and Windows warned me about the drivers being unsigned frequently. So I would be hesitant to devote a lot of time to installing those drivers.
Lastly, I am pretty disapointed with AMD/ATI. Sure, the card is approaching its sixth year anniversary (~June 25, 2008) but it works just fine for most uses. It is a perfectly serviceable card for desktop uses. I just installed an SSD with the hopes of getting four more years out of this computer. I guess I will be religated to Windows7/8 on this machine till the end of its life. People considering the SSD upgrade may want to take this into consideration. I suppose its a non-issue if you are OK with using Windows 7 for four more years.
There seems to be a potential for upgrading the video card to the part used in the 2011 iMac, but for now that part costs $500 or $600, if its even stocked.
Message was edited by: sr.matto (spelling)

Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
Under Windows 7, the highest resolution that supports True Color is 1600x1200. This would be okay if that setting did not distort the picture (everything is slightly squeezed). At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work. On my 27" iMac, 2680x1600 supports True Color as expected.
Also under Windows 7, the display connected via HDMI is not recognized.
I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
Thanks,
Warren
P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
If you need to do this on your MBPr Boot Camp volume, use this link:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC. As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well." And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
-Warren

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Open Dialog Box: full file name is not displayed in edit window under Windows 7

Only the last 16 characters of a file name are displayed in the edit window of a Common dialog box under Windows 7. What is the fix to this problem? I am coding in C/C++ and my compiler is Visual Studio 2005.

Hi warengharding624,
Based on your description, your issue is related about C/C++, since this forum is discussing about Windows Forms Controls, and I will move this thread to C++ forum.
In addition,Could you share us what the type of your project is?
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?

I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?
Actually I would like to have the Ipad connected to pc and then run an application on the ipad (which is shown on my windows machine) and record it on the windows machine... Is this feasible?

If you have an HDMI connection on your computer, it is most likely an output, it won't recieve a signal unless it's on a video capture card. Recording to the PC could be a difficlut task. HDMI is encrypted to keep you from copying but there are ways to do it. It would also depend on what content you intended on recording. If it's movies you have purchased or rented, it would be illegal.

ACD as main display under Windows/BootCamp while in clamshell possible?

Is there any way to run a BootCamp Windows XP Pro installation on an MBP using the ACD as main display while in clamshell mode? Currently the system refuses to wake up after I close the lid. I use a BT mouse/KB, but even with a USB mouse connected it wouldn't wake up. It seems like it would be possible, but I'm not sure how to go about it.

Correct, there was no Gather Windows button.
I do have multiple adapters, but one is an Apple adapter which is, apparently, "passive" whilst the other is active. The passive adapter never works at all under MacOS X, but I haven't tried it under Windows. The "active" adapter works under Windows, but only shows the apple bootup logo under MacOS X, and then turns the display off.
I don't think that the mini displayport is faulty, because the second display plugged into it works perfectly through BootCamp.
I'll try thoroughly testing out all adapters tonight, and then try a different brand of display. I've seen a lot of posts about ViewSonics being flakey under MacOS X, so it's possible it could be on the display driver side of things. Maybe ViewSonic does something screwy signal-wise in their displays, and Windows is willing to deal with it but MacOS X isn't.
Oddly enough, the ViewSonic display I have was shipped with a single-link DVI cable, and it's always worked without a problem, even when plugged into the dual-link DVI port on the Mac Pro. So I don't believe that the display *itself* requires a complete dual-link connection to the computer.
I have much appreciation for all the help and suggestions. Thanks again.

Display on Asus screen under windows distorted

Similar Messages

Maybe you are looking for