Display only default user name and password

Hi all,
I just want to display the default usernames and passwords. Can i do that?
Thank you!
Dan.

try this,
SQL> SELECT USERNAME,PASSWORD,CREATED FROM DBA_USERS WHERE CREATED <=( SELECT CREATED from v$database);note:- Some of us who have done more than one CREATE CONTROLFILE and observed what happens know that V$DATABASE.CREATED is not "Creation date of the database".
It is actually "Creation date of the *controlfile*".
source:-http://hemantoracledba.blogspot.com/2010/07/vdatabasecreated-is-this-database.html

Similar Messages

  • What is the default user name and password for oracle databse 10g

    Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
    thanks

    system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
    In case passwords have been forgotten, those can be reset:
    From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
    OS> sqlplus / as sysdba
    SQL> alter user sys identified by yourNewSysPassword;
    SQL> alter user system identified by yourNewSystemPassword;
    And you're done with it.
    HR Madrid

  • Default user name and password on Stor.e Tv

    Hey,
    I just bought a 2tb stor.e tv unit and have moved all my files onto it,i am trying to access it over the network and it is asking me for a user name and password but i have never set one!!!
    Does anyone know the default user name and password OR do you know how i can set one up?
    Also has there EVER been a firmware update for this thing?
    Best thing i can tell is that there has not been one since 2010.
    Any help is greatly appreciated!!
    Cheers Guys,
    John.

    From my knowledge the StorE TV is not secured with any passowords.
    I think that you should try to set Stor.E TV to its default factory setting.
    To do that, you have to go to the Setup -> General Setup -> Default.
    But if it fails and the Store TV is not able to boot then this may be a hardware malfunction.

  • Wht is default User name  and password for the J2ee server

    Hi , All
    I had downloaded JSC for evaluation to get to creator hero ....
    After Complete Instalation I had started PointBase then start default Server Domain1
    when I try to start the deploy tool for that wht is username and password 'coz while installing server it doesn't ask me for user name and password for domain1......
    even same in apllication server .... username ==?? and pwd =??
    help me out...
    Thanks in adv..
    --Sudhir                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    user admin
    password adminadmin

  • What is the default user name and password to connect Guest by  Console?

    HI
    at last I have successfully created Guest!!!!
    but trouble never leave!!
    i isntall tight vnc in the VOVM
    now when i am clicking on Console
    its launching java , then its giving me a dialog box
    Oracle VM login
    username
    password
    when i was creating Guest, it did not ask for any passoword as it used to ask for OVM 2.2
    so what password do i have to type ??
    thanks for your help
    I am nearly there..

    Hi,
    RTFM: http://download.oracle.com/docs/cd/E20065_01/doc.30/e18549/vm.htm#BABCCHHF
    ..."You are prompted to enter the login credentials for Oracle VM Manager."...
    Regards
    Sebastian

  • Defalt User name and password

    My grandson is having problems with his wireless unit. He thinks he needs the original defalt user name and password to get it all straightened out. Does anyone know how to find this information?  Thanks for any help.
    Chuck

    What router are you using?
    For most Linksys routers, the default user name should be left blank, and the default password is "admin"   (with no quotes).
    On some Linksys routers, the default user name and password are both "admin"  (with no quotes).
    For more details, you can download a User Guide for your router, from Linksys.com
    Message Edited by toomanydonuts on 04-12-200703:45 AM

  • On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

    On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

    HI Emmet,
    thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
    I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
    So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
    i hope that helps anyone out there also!
    Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.    
    Thanks again, much appreciated.
    Felix    

  • HT203261 When i open my email it comes up with The user name or password is incorrect. This has only come up in the last day. As far as I am aware the user name and password is correct. Can you please advise.

    My email has been working fin. however In the last day or so when  i open my email or send an email it comes up with,
    The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
    Declan Jackson

    Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

  • Time Capsule won't accept my user name and password for access - Help!

    Hi all,
    My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
    When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
    I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
    Help! and Thanks.

    Norman & Harry,
    Consider the following:
    *_Time Capsule Keeps Asking Me For a Password_*
    It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
    It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
    You will find that by launching Airport Utility.
    Select the TC on the left.
    Click "Manual Setup".
    Click the "Time Capsule" Tab.
    You will see "Time Capsule Name:" and "Time Capsule Password".
    Make sure “Remember password in keychain" is checked.
    That is the information you need to enter when it asks for "username & password."
    *I Don’t Remember What My Time Capsule Password Is*
    You can see what your current TC password is by going into Keychain.
    Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
    Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
    To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
    Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
    Now the Password field will display the password you entered into Airport Utility for your Time Capsule
    *It Still Won’t Accept the TC Name and Password*
    Launch Airport Utility --> Manual Setup.
    Select "Disks" in the tool bar above.
    Click the "File Sharing" tab.
    Is "File Sharing" checked? It should be.
    What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
    If you have made any changes then click "Update".
    Let us know if this resolves your issue.
    Cheers!

  • I'm trying to access a forum that requires a user name and password.  When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem.  I can confirm the username and password are the same

    I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect.  Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem. 
    What could be causing this, is it an issue with cookies, caches or similar.  How can I resolve it?  The forum administrator is at a loss as to what the problem is.

    Try the following steps in Safari to see if they help:
    1) First try clearing the Safari cache.  To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
    2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
    Here is a list of the options and what they do. I pulled it from the Safari help page.
    Clear history:
    Clears the list of webpages you viewed.
    Reset Top Sites:
    Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
    Remove all webpage preview images:
    Clears any thumbnail images Safari saved of webpages you viewed.
    Clear the Downloads window:
    Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
    Remove all website icons:
    Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
    Remove saved names and passwords:
    Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
    Remove other AutoFill form text:
    Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
    Close all Safari windows:
    If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
    Reset all location warnings:
    Clears any information websites saved about your location.
    Remove all website data:
    Removes cookies, tracking information, and other data that websites stored on your computer.

  • PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
    In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • User name and passwords autofill

    user name and passwords autofill only autofills the user name and not the password. Any ideas on how to change this so that passwords are also autofilled?

    Hi Geoffrey
    Some web sites (particularly banks, credit card companies) specifically code their sites to prevent the password from automatically appearing. This is due to security concerns.
    Notwithstanding the above, It's possible there's oddities in the Keychain file. This file retains your User Name/Password information. In your Finder: Applications>Utilities folder. Open Keychain Access. Go to the Keychain Menu>Keychain First Aid>Repair. If any errors appear rerun until you get a clean pass.
    If the lack of auto-fill continues, there is a workaround for the web coding via 3rd party Safari add-on (shareware) SAFT. In SAFT's Misc. preference file settings (part of the Safari Preferences) is "Auto-complete always on".
    Note: some of the more elaborate security sign-ons, such as those that use multiple pages for the sign-in are not overridden by the SAFT feature.

  • I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

    I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
    Can someone direct me to a working page with this file or provide a different solution? Thank you!

    Hello,
    As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
    I would suggest you to contact Godaddy to either reset password or reset the permissions.
    Regards
    Vivek

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

Maybe you are looking for