Display output on LED TV from DisplayPort on zbook 15

Hi,
I have a notebook zbook 15 Product D5H42AV.
On this laptop I have a DisplayPort output and a Thunderbolt output.
I have bought on the market an adapter (not from HP) from DisplayPort to HDMI.
I cannot get the output displayed on my LED TV (full HD).
Could it be that the adapter supports only DisplayPort 1.1 and not 1.2?
If I want to see the screen on TV, shall I use the a DisplayPort adapter or Thunderbolt adapter?
Is there any way to troubleshoot why I cannot display the output on TV from my laptop?
This question was solved.
View Solution.

Hi Provost,
thank you for your feedback. I have tried but still not working.
According to this document:
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA5-2657ENW
it seems that I should connect the HDMI to DisplayPort:
*DisplayPort connector supports a DisplayPort display, a HDMI display with an DP-to-HDMI dongle, a VGA display with a DP-to-VGA dongle, or a DVI display with a DP-to-DVI dongle.
I have a Samsung TV Series 6 with 4 different HDMI input:
HDMI1 (STB)
HDMI2 (ARC)
HDMI3
HDMI4 (DVI)
I have tried with all of them unsuccessfully. I'm afraid that my DP-to-HDMI dongle that I bought on a local internet shop and it's made in China is somehow not fully compatible with my zbook.
Maybe I should buy the original one from HP.
When I connect the laptop to TV I saw that somehow the TV see that the port is connected but it says "No Signal".
Also pressing F4 and checking with the Screen Resolution windows (in Windows 7) shows the second display as VGA. So it looks it does not detect the DisplayPort.
Is it possible that the port must be enabled (bios or Windows setting) or that I miss some drivers?
Checking on the Internet I found that there are some adapter that can connect also to the thunderbolt port:
https://m.cdw.com/shop/products/StarTech.com-Mini-DisplayPort-to-HDMI-Video-Adapter-Converter/197508...
The product is described as compatible with zbook 15
However the official HP site sell a dongle only for the DisplayPort:
http://shopping1.hp.com/is-bin/INTERSHOP.enfinity/WFS/WW-USSMBPublicStore-Site/en_US/-/USD/ViewProdu...
The adapter I'm using can be seen in this page:
http://media.extron.com/download/files/userman/68-1887-01_B.pdf
It's the "DisplayPort Male to HDMIF Active Adapter" (top right code 26-655-01).
I'm a bit confused now. I don't know if I have to buy a different adapter or if there is a way to troubleshoot my problem and see if the DisplayPort is enabled and working on my laptop.
Regards.
Alberto

Similar Messages

Could not display output in PDF format from a RDF file

Hi all,
I'm calling a report file (.RDF) from the browser using RWCGI.EXE, and specified the output in PDF format, but it always asking me to download the active-X for the PDF file generated by the report. I have Adobe Acrobat Reader installed on my machine, what could be the problem?
thanks in advance.

I had the same problem.
As a quick fix, what I enventually did, if you are using WebDB and CGI, is to create an alias in the cgicmd.dat file.
It worked after.
Example of line:
===============
web41pdf: report=web_41.rdf server=Rep60_Z11734 userid=DEMO6I/DEMO6I@PERSOEM destype=cache desformat=PDF tolerance=1440
Then you call the URL http://<web site>/rw60cgi?web41pdf
Yet I would be glad to understand why I also get this message.
Philippe Dalmas.

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

[GTX770]No display output HDMI/Displayport when booting

I've recently upgraded to an Haswell setup with a MSI Z97 pc mate and MSI GTX770. The card seems to work fine when I use DVI output. However, when i try to use either hdmi or displayport I only get display output once i'm in windows. The bios and booting process give no output on either connection.
Is there something wrong with the GFX card, is there some bios setting i can try?

Quote
Thanks for the quick reply. Will this GOP UEFI bios make Displayport work on boot?
don't know, maybe
Quote
I've never heard of GOP UEFI bios, so I don't have a clue what advantages I get with that.
its related to Win8 features, ultra fast boot and so on if you decide to use such

Tecra M11: How to get 1080i/p from DisplayPort?

I've hooked up my Tecra M11 via a mini-DisplayPort to HDMI adapter to my digital TV but it seems like the best it can do is 800x600!! (WIndows XP)
How do I get 1920x1080 out of this laptop?
Remove Intel drivers?
Add newer Intel drivers?
Patch from Microsoft?
Is it possible to also output HD audio over this port?
Other laptops with HDMI ports can do all of the above, why can't the M11?

Display Port is the successor to HDMI and will eventually start appearing on TVs and other A/V equipment in the coming years.
The evolution has been VGA -> DVI -> HDMI -> DisplayPort.
The Tecra M11 has a mini-display port adapter in lieu of HDMI as do many other current model laptops today. It does not have a HDMI adapter (or even a mini-HDMI adapter, as found on some digital cameras.)
Adapters are available that convert from DisplayPort to HDMI and mini-DisplayPort to HDMI.
If I connect a mini-DisplayPort to HDMI adapter to the laptop, the best resolution that I could successfully view via the cable was 1280x720 (720p). It is not even possible to select 1920x1080 with the output set to "Digital TV" (the maximum resolution is 1600x900). If I say that it is a "Monitor", then it lets me select 1920x1080 but video is only generated at 800x600 and no other resolution.
It's hard to say whether the limitations here are being imposed by the driver from Intel or the actual hardware itself.
Which model do I have?
Tecra M11.
Part No PTME1U-01F01101

Combining 2 readings into a waveform chart/graph displaying continuous readings of data from different sources

Hi,
In the file
(Serial Read and Write to .tdms & Compare on Graph – test.vi) I am trying
to integrate the following two waveforms into a single waveform: Realtime
reading and Waveform chart (open vi to see). Both of them display speed vs time
but from different outputs. One comes from an excel file (Teraterm – Results.xlsx
– sheet 4, (column 3:row 4) to (column 3:row 1878)) and the other comes from
the Serial input which is in Hex format and is split to get the various readings
of speed, voltage etc. I have already wired speed to a variety of waveform
outputs, but all result in broken wires.
The readings are taken in by the program
and but I am unable to wire the two readings together into one graph.
Please do let me know as to how can I make this work.
Thanks in Advance.
Best Regards,
Akhil
Kumar Meesala (Mr.)
Year
4 | Undergrad | Mechanical Engineering
National
University of Singapore
Email:
[email protected]
Mobile:
(+65) 9326 7069
Solved!
Go to Solution.
Attachments:
Serial Read and Write to .tdms & Compare on Graph - test.vi ‏58 KB
Teraterm - Results.xlsx ‏593 KB

Dear GerdW,
I'm sorry again about the misspelling your nick.
I tried connecting a waveform chart to the two terminals (speed from the DAQ and speed from the excel file) but I was unable to get the connection right. I understand that charts are used for readings which are equally spaced out, whereas XY graphs are used when the readings are not be spaced out uniformly. But I am unable to wire the connections correctly.
Actually the DAQ device continuously sends out data through the serial port. So I would not run out of data . Are you referring to the data coming from the DAQ device or the excel file? I actually have not thought of what would happen when the excel file would run out of values I am just hoping for the software to run till then for now
I have cleared up the wires as well Thanks for your help.
Best Regards,
Akhil Kumar Meesala (Mr.)
Year 4 | Undergrad | Mechanical Engineering
National University
of Singapore
Email: [email protected]
Mobile: (+65) 9326 7069
Attachments:
Get Excel Values.vi ‏25 KB
read_excel_values.llb ‏201 KB
Serial Read and Write to .tdms & Compare on Graph - test.vi ‏79 KB

Turn off external display output?

I've bought a nice big LCD TV mainly for consoles. Because I have it next to my iMac i've also connected that to the TV using a mini-dvi adapter and a dvi-hdmi cable.
It works great but I only want to use it for playing downloaded video and the like on the big tv.
When I'm not using it I want my iMac to free up the resources it must be using to achieve screen spanning but I cannot figure out a way to tell the iMac to disable external display output.
I've tried display mirroring figuring that it won't be eating up video RAM, but it causes page tearing on my mac when dragging windows around for example.
Even when the TV is unplugged from the mains the mac seems to be outputting to the dvi out, the only way to stop it is the yank the mini-dvi connecter from the back.
Are there any hacks or utilities that can manually turn dvi support on and off?

Hello Mark
I'm using a 27" flat screen TV, mini DVI and 12' S-Video cable.
Mostly I watch DVD movies on that Display while working at the iMac's 17" it's also great for iPhoto Slideshows and PowerPoint.
Not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just turn it off or change the channel.
I tend to stay away from mirroring for the same reasons, but also because the TV's across the room.
Again not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just leave it connected up to prevent damage to DVI port, Adapter and cable. "yank not"
Just be sure to gather up all your windows back to the iMac Display befor shutting off or changing the channel.
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

Help! one to many relationship table and display output as exists

I have two tables:
Table1: LOCATION with field locn_id
Table2: TRACKING with field from_locn and to_locn
Example
locn_id from_locn to_locn
26001A 26001A 26002A
26002A 26001A 26001B
26001B 26001A 26001C
26001C
I am linking locn_id to from_locn.
I want to display output as:
If locn_id exists in from_locn (I dont care how many records), display Y. If locn_id does not exist then display N.
So in above case, output should be
26001A Y
26002A N
26001B N
26001C N

Here is my try:
create table LOCATION(locn_id   VARCHAR2(10));
create table TRACKING(locn_id   VARCHAR2(10), from_locn VARCHAR2(10), to_locn VARCHAR2(10));
insert into LOCATION values('26001A');
insert into LOCATION values('26002A');
insert into LOCATION values('26001B');
insert into LOCATION values('26001C');
insert into TRACKING values('26001A', '26001A', '26002A');
insert into TRACKING values('26002A', '26001A', '26001B');
insert into TRACKING values('26001B', '26001A', '26001C');
insert into TRACKING values('26001C', '',       ''      );
select l.locn_id,
(select decode(count(*), 0, 'N', 'Y') from tracking t where l.locn_id = t.from_locn ) exists_flag
from   location l
LOCN_ID    E
26001A     Y
26002A     N
26001B     N
26001C     N
4 rows selected.Edited by: Thomas Morgan on May 31, 2013 3:43 PM

Rows to columns/Transpose the records Query and Display output

hi ,
can anyone help me query this and transpose it to this format?
i am still a beginner in sql.
thanks for help!
Rows to columns/Transpose the records Query and Display output
id     startdate     endate
1111     1/2/2001     11/3/2001
1111     2/5/2002     4/3/2002
1111     2/6/2000     2/5/2001
3333     5/2/2003     11/3/2003
3333     6/2/2003     12/3/2003
3333     2/6/2005     2/5/2005
desired output
id     startdate1     endate1     startdate2     endate2     startdate3     endate3
1111     1/2/2001     11/3/2001     2/5/2002     4/3/2002     2/6/2000     2/5/2001
3333     5/2/2003     11/3/2003     6/2/2003     12/3/2003     2/6/2005     2/5/2005

Have you only 3 dates for each id ?
So, try :
SQL> l
1 with tbl as
2 (select 1111 as id, to_date('01/02/2001','DD/MM/YYYY') startdate, to_date('11/03/2001','DD/MM/YYYY') enddate from dual union all
3 select 1111 as id, to_date('02/05/2002','DD/MM/YYYY') startdate, to_date('04/03/2002','DD/MM/YYYY') enddate from dual union all
4 select 1111 as id, to_date('02/06/2000','DD/MM/YYYY') startdate, to_date('02/05/2001','DD/MM/YYYY') enddate from dual union all
5 select 3333 as id, to_date('05/02/2003','DD/MM/YYYY') startdate, to_date('11/03/2003','DD/MM/YYYY') enddate from dual union all
6 select 3333 as id, to_date('06/02/2003','DD/MM/YYYY') startdate, to_date('12/03/2003','DD/MM/YYYY') enddate from dual union all
7 select 3333 as id, to_date('02/06/2005','DD/MM/YYYY') startdate, to_date('02/05/2005','DD/MM/YYYY') enddate from dual )
8 select id, max(decode(dr,1,startdate)) start1,
9             max(decode(dr,1,enddate)) end1,
10             max(decode(dr,2,startdate)) start2,
11             max(decode(dr,2,enddate)) end2,
12             max(decode(dr,3,startdate)) start3,
13             max(decode(dr,3,enddate)) end3
14 from (select id, startdate,enddate, dense_rank() over (partition by id order by startdate) dr from tbl)
15* group by id
SQL> /
                                                ID START1   END1     START2   END2     START3   END3
                                              1111 02/06/00 02/05/01 01/02/01 11/03/01 02/05/02 04/03/02
                                              3333 05/02/03 11/03/03 06/02/03 12/03/03 02/06/05 02/05/05
SQL> HTH,
Nicolas.

WD Compoenent - Non -Interactive form- Not displaying output

Hi,
I am practicing this adobe form session [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a3e2f018-0b01-0010-c7a8-89deb6e63e97] from SDN.Unfortunately this session was not complete so I am trying to complete it.
In brief : this WD component accepts CARRID and displays output in PDF format.
I was able to capture selection and get respective entries for that selection in my internal table but my display is blank.Here is what I coded in Search Button..
method ONACTIONSEARCH .
    data: isflight type table of sflight.
    DATA lo_nd_adobe_data TYPE REF TO if_wd_context_node.
    DATA lo_el_adobe_data TYPE REF TO if_wd_context_element.
    DATA lo_nd_data_selections TYPE REF TO if_wd_context_node.
    DATA lo_el_data_selections TYPE REF TO if_wd_context_element.
    DATA ls_data_selections TYPE wd_this->element_data_selections.
* navigate from <CONTEXT> to <DATA_SELECTIONS> via lead selection
    lo_nd_data_selections = wd_context->get_child_node( name = wd_this->wdctx_data_selections ).
* get element via lead selection
    lo_el_data_selections = lo_nd_data_selections->get_element( ).
* get all declared attributes
    lo_el_data_selections->get_static_attributes(
      IMPORTING
        static_attributes = ls_data_selections ).
* Retrieve that data from the database. Normally it is suggested to
* encapsulate the data retrieval in a separate class.
* For simplicity, the SELECT statement has been implemented here.
    clear isflight. refresh isflight.
    select * into corresponding fields of table isflight from sflight
    where carrid = ls_data_selections.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
    lo_nd_adobe_data = wd_context->get_child_node( name = `ADOBE_DATA` ).
    lo_nd_adobe_data->bind_elements( isflight ).
endmethod.
endclass.
Anything wrong with my code..I am getting my data in isflight internal table.
FYI..I am throwing output as text field in adobe form.
rgds
vara
Edited by: Vara K on Jan 19, 2009 9:51 PM
Edited by: Vara K on Jan 19, 2009 10:02 PM

Hi Vara,
Try this:
method ONACTIONSEARCH .
    data: isflight type table of sflight.
    DATA lo_nd_adobe_data TYPE REF TO if_wd_context_node.
    DATA lo_el_adobe_data TYPE REF TO if_wd_context_element.
    DATA lo_nd_data_selections TYPE REF TO if_wd_context_node.
    DATA lo_el_data_selections TYPE REF TO if_wd_context_element.
    DATA ls_data_selections TYPE wd_this->element_data_selections.
* navigate from <CONTEXT> to <DATA_SELECTIONS> via lead selection
    lo_nd_data_selections = wd_context->get_child_node( name = wd_this->wdctx_data_selections ).
* get element via lead selection
    lo_el_data_selections = lo_nd_data_selections->get_element( ).
* get all declared attributes
    lo_el_data_selections->get_static_attributes(
      IMPORTING
        static_attributes = ls_data_selections ).
* Retrieve that data from the database. Normally it is suggested to
* encapsulate the data retrieval in a separate class.
* For simplicity, the SELECT statement has been implemented here.
*    clear isflight. refresh isflight.
    select * into corresponding fields of table isflight from sflight
    where carrid = ls_data_selections-carrid.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
    lo_nd_adobe_data = wd_context->get_child_node( name = `ADOBE_DATA` ).
    lo_nd_adobe_data->bind_elements( isflight ).
endmethod.
I hope it helps.
Regards
Arjun

WAD Report delaying to display output

Hello,
WAD report taking 6 min time to display the output but the same report displaying output
in 1 min 50 sec when I executed in BEx Analyzer
The Same BEx report I incorporated in WAD but it's delaying to display the output.
What might be the cause in delaying the output display.
Srujay

Hi,
Please to use the new cache mode as note:
1026944 - New cache mode for BI 7.0 without directory
As per the note:
To activate the new cache mode, run the report SAP_RSADMIN_MAINTAIN with
the following parameters and the option "INSERT":
OBJECT: RSR_CACHE_ACTIVATE_NEW
VALUE: X
After this procedure you can benefit from the new cache mode by
activating it for your query or queries. Go to RSRT -> enter query -> properties ->
cache mode: 5 Cluster Enhanced should be selected.
Or via mass maintenance to all queries (transaction RSRT -> menu "Environment" -> "Mass Maintenance").
It should resolved your issue.
Thanks,
Venkat

OS X 10.8.5: no sound from DisplayPort after Wake up

Hi,
I have problem with my macbook pro 13" mid 2012 with Mountain Lion 10.8.5. When I turn laptop on everything works just fine but after sleep and wake upthere is no sound coming from displayport. I'm using HP ZR2440W as my desktop display and classic mini-displayport to Displayport cable. Few weeks lbefore there is no problem with this. Anyone with same problem? Any tips to fix this?

Apple preparing 'supplemental' update for OS X 10.8.5

Help with displaying output of javac

Hi, I got some code from this forum that helped me
to implement buttons with Action for compiling java code. Any output or exception generated can be displayed to JTextArea.
However, just found out the code I got hangs in cases
when there seems to be lots of exception in source code. (i.e. Nothing displayed on JTextArea )
I list the code below, can someone tell me what I need to do to display output in JTextArea properly??
/* Usage
java OutputCapture javac MyClass.java
java OutputCapture java MyClass
import java.io.*;
import java.util.*;
import javax.swing.*;
public class OutputCapture {
public static void main(String[] args)
JFrame frame = new JFrame();
JPanel panel = new JPanel();
JTextArea tArea = new JTextArea("",8,20);
tArea.setLineWrap(true);
tArea.setWrapStyleWord(true);
JScrollPane pane = new JScrollPane(tArea);
panel.add(pane);
frame.getContentPane().add(panel);
frame.setSize(300,300);
frame.setVisible(true);
String runString = "c:\\java\\bin\\"+ args[0]+ ".exe " + args[1] + "";
String output;
try
Process p = Runtime.getRuntime().exec(runString);
Vector streams = new Vector();
streams.addElement(p.getInputStream());
streams.addElement(p.getErrorStream());
BufferedReader reader = new BufferedReader(new InputStreamReader(new SequenceInputStream(streams.elements())));
while ((output = reader.readLine()) != null)
tArea.append(output + "\n");
reader.close();
catch(Exception e) { e.printStackTrace(); }
</pre>
* Can someone please list the code for displaying
output of compiling/runnning app with Runtime.exe()
command in JTextArea properly? (this is driving me
nut)
Thanks
Okidoki

Hi
I tried your code and it still doesn't work.
It simple hangs there now without output to
screen. Can you be more specific? I have
provided your code below and a class with
bug to be compiled by your code.
Can you show me how the output of compiling can
be shown to screen or to a file through
your method?
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
public class Exec {
     public Exec(String app) throws Exception {
          Process process = null;
          //final OutputStream out;
          final InputStream err, out;
          process = Runtime.getRuntime().exec(app);
          //out = process.getOutputStream();
          out = process.getInputStream();
          err = process.getErrorStream();
          Runnable r = new Runnable() {
               public void run() {
                    Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
                    try {
                         while(true) {
                              int i = out.available();
                              int j = err.available();
                              if(i > 0) {
                                   byte[] b = new byte;
                                   out.read(b);
                                   //System.err.write(b);
                                   System.err.println(b);
                              if (j > 0) {
                                   byte[] b = new byte[j];
                                   err.read(b);
                                   //System.err.write(b);
                                   System.err.println(b);
                         } // while
                    } catch (IOException e) {
                         System.err.println(e);
          new Thread(r).start();
          process.destroy();
     public static void main(String[] args) {
          try {
               //String s = "c:\\JBuilder5\\jdk1.3\\bin\\javac.exe FontColorDialog.java";
               String s = "c:\\JBuilder5\\jdk1.3\\bin\\javac.exe test2.java";
               new Exec(s);
          } catch (Exception e) {
               System.err.println(e);
//==================================
// Testing class
//import javax.swing.*; // Uncommented here on purpose
public class test2 {
     public static void main( String args[] ) {
          System.out.println("Hello World!");
          JTextField jtf = new JTextField();
          System.out.println("Font: " + jtf.getFont().toString() );
Thanks

IMac G5 20" 1.8ghz no display output

Hello,
been working on this for a while now.
I have an iMac G5 20" 1.8 ghz, with no display output/black.
What indications i am seeing -
diagnositics leds - all three green are lit, meaning GPU is talking to LCD.
secondary display connected and working correctly.
start up chime present.
looking at LCD in dark room, seeing the backlight working correctly.
what i have done -
Pram reset
smu reset
PSU change
Ram changed
LCD unit changed for known good one
LCD display cable changed for known good one
AHT will not load so no go there.
Any help to get this resolved will be great.
thank you.

This happened to mine years ago: diagnosis revealed motherboard needed....IOW, yours is prolly dead too.
I am now researching a way of re- purposing the (intact) LCD as a 2* monitor (nothing yet), and removing the HD for use as a bootable 10.3.9 disk in a G5 tower.

Display output on LED TV from DisplayPort on zbook 15

Similar Messages

Maybe you are looking for