Display Planning data (for demand planning) in another UoM

Hi All,
The Planning area UoM is in "L". We have products whose base UoM is KG and some in L. In BW we convert all to L and load into Planning area.
The Product master is CIFed to APO and has the conversion between L and KG.
we have a requirement to view the planning data in Kilo tons i.e 1,000,000 KG.
Have maintained a Mass UoM called ZKT in CUNI transaction and maintained the conversion that 1ZKT = 1,000,000 KG. Also have defined an ISO code for the same.
Now when we load the data in the planning book the default UoM is L. When we go to user setting and maintain alternate UoM as Tons "TO", the system converts the data to tons and displays it. no matter what is the criteria used in header selection.
But when we try to display data as ZKT UoM get a error msg that conversion from L to ZKT is not possible as the conversion is not maintained in Product master.
But when we select material code (SKU) as the show condition and also in the filter condition use material code (SKU) and make a selection, the system converts the planning data from L to ZKT.
The question is when the system can convert L to TO at any character level as long as the product master has the L to KG conversion, why is not able to convert L to ZKT.
Why is the system able to convert L to ZKT for individual SKU's and only when the show condition is Material code (SKU).
Would appreciate your quick reply.
Thanks,
Nitin

Hi Nitin,
We have same scenario right away in our system. Some of our material have a conversion in R/3 for example: 1Unit=10BULTOS, then CIFing into APO.
The scenario is that, once we planned already in APO- we dont want to go back in r/3, any changes should be remained in APO. What we did is that we maintained the CIF user setup. Maybe you can try this as well without affecting other Uom.
Cheers!

Similar Messages

  • Master data for demand planning

    hi guru's,
    what is the master data for dp, from were we get & how BI is helpful in this.
    BW integration to apo dp.pls help me out
    with regards,
    chinni

    Hi Chinni,
    Data from R/3 to BIW is transfered through LIS, LO-CockPit's Info Structures. 
    This is how the flow goes on....
    The transactions that are executed in R/3 are stored in the background tables.
    Data from these tables will be copied to the info Structures(LIS, Lo-**** Pits).
    A data source is generated basing on the infostructure.
    Data source is then replicated to BI, The Data from the data sources is then copied to Info Cube.
    Once the data is there in your Infocube,
    you create Characteristics value combinations and then transfer the data from the Info Cube into the Planning Area.
    Once you are done with demand planning, you can either transfer the data to SNP or the demand management in R/3.
    If you are not planning to use LIS Structures, then you can download the data from the R/3 Tables to an excel sheet and upload them into BI.
    The transaction code for creation of LIS Structures is: MC21
    If you have a seperate BI server(Apart from one in APO), it is best pratice to load data into the BI server and then transfer the data to APO BI.
    Let me know if you have any more questions regarding this.
    Best Regards
    Raghu Kishore V

  • Query not displaying updated data for planning

    Hi Experts!
    I've created a revaluation function in IP and tested it in the modeler, it's working fine. I have an issue when running the sequence in WAD, as it is not displaying the modified data. The message says that the records were modified, but those changes aren't being displayed in the query. The query being used isn't input ready, it just takes data from the cube and revaluates them.
    I have already tried adding a refresh command in WAD, but I've found out it doesn't fit this purpose. Am I missing a configuration so it can read the delta buffer? or must I necessarily save the plan data for it to be displayed? Any ideas?
    Thanks in advance for your help,
    Al

    Hi,
    you are on the save side if you use an input-ready query and a button representing the revaluation function in the Web Application Designer (WAD) . Of course the function has to change data via an aggregation level A on a real-time cube C that is also contained in the InfoProvider P used to create the input-ready query. In the most straightforward case A = P.
    Input-ready queries always know about the most-recent data, i.e. data in all green + yellow requests and the data in the deltabuffers.
    But even a 'reporting' query e.g. on a real-time InfoCube C and the revaluation planning function on an aggregation level A on C should know about the most-recent data as defined above.
    You can check the 'Requeststatus' used in the 'reporting' query. It should be 'Real-time InfoCubes up to current version'. This setting can be found - depending on the release - in transaction RSRT or the Query Designer.
    You should not forget to do some simple checks: Maybe the function has changed data that are not contained in the filter of the query.
    Regards,
    Gregor

  • Upload plan data for balance sheet accounts

    Hi Experts,
    Is there a way to upload plan data for balance sheet accounts? I can upload revenue/cos and expenses through the profit center and cost center uploading but need to upload balance sheet accounts as well. Any  help would be much appreciated. Thank you.

    Loading balance sheet accounts using the Excel load to profit center tells me that I selected balance sheet accounts that cannot be entered manually. Not sure what this means... if I have an accounts receivable account, how would I find another equivalent account?

  • Release Offset for Demand Plans

    Hi,  We are trying to understand and use the release offset for demand plans.  Basically we would like to hide the current period from supply planning.  This seems to work in period one of the forecast.  As time passes and we get to period two we would like the forecast to no longer be exposed to supply planning.  This does not seem to be the case.  We have tried to roll the forecast however that does not seem to resolve it.  I believe we could delete the forecast lines in the "Maintain Demand Plan Screen" and then release the forecast however that is very work intensive.  How should this be done?
    Thanks,
    Dave

    Dear Jeevan,
    Before you can use the invoicing plan with automatic settlement, the Evaluated receipt settlement delivery indicator must be set on the Purchasing Data screen in the vendor master record.
    (If you wish to enter invoicing dates manually, this is not necessary.)
    Purchase Order
    SAP recommends using order type FO (framework order), i.e. a purchase order with a predefined extended validity period and a "reason for cancellation". The invoicing plan can adopt the validity period specified in the PO header.
    PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
    The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated receipt settlement indicator.
    Customizing
    Under Purchase Order --> Invoicing Plan --> in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
    If you want to split it based on periodic than : maintain the invocing plan types :Maintain Periodic Invoicing Plan Types
    Regards,
    w1n

  • Data Source to upload plan data for CO_OM_CCA_: CC: Costs and Allocations

    Hi Guru's,
    We have Data source that which upload Actual data for CCA (0CO_OM_CCA_1 - Cost Centers:cost and allocations).  Every time it is full upload before loading the data deletion of previous load request will be done.
    One more information required that i have checked in the BW cube for plan data it is available in the info cube for one cost center and rest of the costcenter i don't have the data now the users are requesting to upload the plan data for rest of cost centers.
    Now as per the business requirement the users are requesting to upload the plan data in to the same i am not sure whether it will pull the plan data with actuals in to BW cube. Is there any alternate with the same data source or else is there any specific data source for uploading Costs and Allocations plan data
    Please suggest me how can i go a head with this requirement.
    Thanks in Advance.
    Ganni

    You can use the same datasource to load plan/budget data to the cube for all the costcenters. And regarding the actuals, you can use 0CO_OM_CCA_9 datasource to load to actuals cube and create a multi on top of both plan and actuals cube for reporting purposes.

  • How To… Display All Comments for a Planning Package

    Hi,
    I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
    Thanks,
    Ale

    Thanks Marc.
    I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
    How To. Display All Comments for a Planning Package
    As I have no idea how to achieve the functionality detailed in the thread above.
    Thanks for your time Marc,
    Regards,
    Ale

  • Upload Plan data for GL account

    We want to upload plan data for the GL accounts so that the plan data shows with the actual data in the financial statement.
    The question is what is name of the program/tcode
    1. To upload plan data for GL accounts?
    2. To upload plan data in the cost center accounting?
    3. Most important - to transfer plan data from cost center accounting to GL accounts? Currently we have a custom program to upload plan data to CCA.
    Thank you very much in advance
    Praful

    You can plan at GL level using T code GP12N, Planning profile SAPFIGL & summary table GLT0. You will have to define plan version & planning period in t code OBP6.
    Once plan is entered the same will be available in FI reports e.g. F.01
    For Cost center plan use t code KP06. Alternatively you can activate excel integration for planning profile and upload from excel.
    Regards
    Rakesh Pawaskar
    Message was edited by:
            Rakesh Pawaskar

  • NOT WORKING -How To Display All Comments for a Planning Package

    Hi All,
    I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
    Below is how the Layout looks like where comments are posted against Cost Center- year combination.
    Cost Center                          2007     2008     2009     2010     2011
    3          2.00     2.00     2.00     2.00     2.00
    4          2.00     2.00     2.00     2.00     2.00
    6          2.00     2.00     2.00     2.00     2.00
    7          2.00     2.00     2.00     2.00     2.00
    This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
    "How to...BSP display comments"...problem with row comment
    Below are the issues being faced:
    1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are  also visible in BPS0.
    2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
    Highly Appreciate any help with issues mentioned above.
    Kind Regards,
    Robin Johri

    Hello Robin,
    1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
    2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
    Regards,
    Marc
    SAP Techology RIG

  • Quick sizing for Demand Planning system

    Hi All
    Our team is required to do quick sizing for a SCM 5.0 Demand Planning system with Livecache. The DEV and QAS is already available but not being used at all but now we need the quick sizing for the production box. I have never done any quick sizing, detailed help is appreciated. I have gone through the service.sap.com/quicksizing for demand planning it shows 3 input tables only for Throughput sizing - Time Series, DP Run, DP Users. The APO functional guys entered some numbers but not sure what to do next as the Calculate Result shows information Iam not able to understand.
    What I need from sizing is CPU processor, disk size, memory size, etc in clear detail. Please suggest, Thanks in advance.
    Regards
    Ali

    Hello Ali,
    First of all I am not a BASIS consultant and hence it would not be prudent for me to comment on hardware configuration reuqired in your case.
    Secondly I do not understand what you mean by Quicksizer has been shut down. It is available online at <a href="http://service.sap.com/quicksizer">Quicksizer Tool</a> in Service Marketplace.
    There is good amount of documentation available in the website giving details on the basis of computation of different parameters. Again SCM Hardware Configuration is not just dependent on the number of users but the functional requirements as well.
    Thirdly - I cannot explain how SAPS concept is related to SCM Quicksizing. Per my understanding the SAPS concept is an hardware-independent benchmark of throughput which is an indicator of the processing capabilities required at peak loads. SAPS will determines the number and processor speed on your Application Server depending on the processor capabilities. Most hardware vendors provide datasheets with SAPS capabilities.
    Suggest you go through the document "Background: Sizing mySAP Business Suite" under Sizing Guidelines >> General Sizing Procedures.
    Thanks,
    somnath

  • Previous years plan data for single year.

    I have 7 plan data for each year. For example for 2017 I have following ..
    what is planned for 2017 in 2011.
    what is planned for 2017 in 2012
    what is planned for 2017 in 2013.
    what is planned for 2017 in 2014.
    what is planned for 2017 in 2015.
    what is planned for 2017 in 2016.
    what is planned for 2017 in 2017.
    Client wants to store all the previous years plan relating to each year.
    I already have various category for plan such as plan1, plan2, revised plan etc.
    How to handle the above scenario for 7 years plan data. Appreciate any inputs..

    Categories named against planned year can be created. A working category(PLAN) is used in all reports and input templates. whenever PLAN data is finalized PLAN can be copied to respective planned years category . ie in 2012 , when planned data is finalized, PLAN is copied to PLAN2012 .In 2013 , PLAN should be copied to PLAN2013.
    That way , planned amounts of 2017 can be retrieved from   respective planned year categories .
    Planned amount of 2017 in 2012 is cat:PLAN2012,Time:2017.total 
    Planned amount of 2017 in 2014 is cat:PLAN2014,Time:2017.total
    Hope this helps.

  • S_ALR_87013611 is not displaying any data for GL

    Hi,
    THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
    Regards
    SM

    Hi,
    S_alr_87013611 is a report where we can see the  planned and actual costs  in cost elements in cost center wise  for a specific controlling are for a given period.
    Please check if your GL accounts are assigned with the cost elements in FS00.
    If not create them.
    You can assing all cost elements to many GL  at a time using
    OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
    OKb3 _Create the batch input session
    SM30_ Run the batch input session created
    Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
    Similarly please check the cost elements and cost elements group also.
    Thanks,
    Shilpa.

  • Any bapi avaialble to fetch component planned orders for header planned ord

    Hi Experts,
                     We have a req where we need to fetch component planned orders for  header planned order .
    In Detail :
      In MD4C tcode (select planned orders tab -> F8 ), when i pass the header planned order like 17474 .
      I get two component planned orders like 16276 16277 and corresponding materials like 12025185 , 12025189.
    We are using   BAPI_PLANNEDORDER_GET_DETAIL  to  fetch  component materials for a planned order .
    similarly any bapi or tables which have this data  to fetch component planned orders.
    Thanks in advance,
    Mani.

    Hope it would be helpful for you:
    Check these user exits.
    CO610001            User exits: Assembly processing                             
    M61X0001            User exits PP-MRP materials planning                        
    M61X0002            User Exits PP-MRP Material Requirements Planning Evaluations
    Thanks

  • How to display "No data for yesterday" in a scheduled report on Webi

    Hi All,
    In Webi, I am working on scheduling reports and was asked by a user if the scheduled report on Webi can display "No data for yesterday/no orders for yesterday" when the report returns no data due to No Orders submitted or a business holiday. This sounded a good idea to me as this report only looks for previous days orders/sales and there are many instances when the report will return blank page due to no activity the day before.
    Can anyone please guide me on the possibility of achieving something like this on Webi using Bex query.
    Any help will be appreciated .
    Thanks
    Gaurav

    Hi,
    You can format the blocks in the report as "Hide When Empty" or "Hide When [some formula]" and have a blank cell added behind these blocks with a text "No Data for Yesterday"
    Need to set the relative position and ordering for this accordingly.

  • Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air

    Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air.  Date on Windows 8.1 is correct.  Thank you.

    Try doing  a reset on your phone. Sounds like your carrier's time set is not getting through to your device. If the reset doesn't do it, then go to Settings>General>Reset>Reset Network Settings. That should do it.

Maybe you are looking for

  • Ipod is FROZEN and WONT SHOW UP ON ITUNES/COMPUTER!

    My second generation Ipod is a little more than a year old and has worked splendidly until this last monday. Five days ago my ipod would not play a song, and when i tried to skip it, it wouldnt play that song either. The CD cover would also not show

  • Can't Play Games or iBooks from apple store...

    I have downloaded from the apple store, free games & free ibook app, plus ebook manual for OS 7 for iphone. I have an iphone 4s with OS 7. I am using my computer (PC XP) to download & transfer as i DO NOT have wi-fi. I am doing everything legit, but

  • On iPad Air how do I post a pic to Facebook if the pic is not in camera roll?

    The pic is in a collection synced w my iMac, so the pic is on the iPad Air but not in camera roll. How do I copy a pic to camera roll using only the iPad Air? Then post the pic on facebook?

  • Magic Mouse Menu Scrolling?!?

    Just bought a Magic Mouse for my (old) G5. Running 10.5.8 with the Wireless Mouse Update installed. So far so good, BUT: The mouse does not seem to scroll through drop down menus like my old Stark Microsoft Mouse (sorry) did. Shouldn't it?!?

  • Delaying to get repair Nokia lumia 830 from servic...

    I buy Nokia Lumia 830 in Octomber 2015. I got problem in display so submit it to service centre. its near 3 weeks will complete but they are saying it will take time. its just matter of changing display. my job sheet no. 505504867/150131/018 Centre n