Display problem after update XP service pack 2

Can anyone advice me on the following :
I installed the XP service 2 (Xp pro) on my Satellite Pro 2100 and ever since I have at the right side of the display a black border that is not used of about 2 cm wide.
I've tried installing the latest nvidia geforce driver but that didn't solve the problem.
Before the update my resolution was put to 1024x768 32 bit colors, but now I can only put it to 969 x 768 ? Never heard of this resolution before but now my screen is no longer jumping from left to right.
Anyone any ideas?
Thanks already,
pLippo

Hi pLippo,
it seems the display driver is not compatible to the Service Pack 2. I understand your issue in this way, you have this problem after installing the Service Pack and not before.
In my opinion you could download and install the latest display driver from toshiba (https://eu.computers.toshiba-europe.com) under Support and Download page.
If this doesn't solve the problem you could wait until toshiba releases a new display driver or you uninstall the service pack 2.
Bye Hans

Similar Messages

Apple cinema Display problem after update

I had a similar problem to lain Maclreud
Immediately after updating to 10.4.11 and rebooting the toparea on my cinema display went dim and I saw the 2 short, one lon blinks on my power display LED
I didn't try it on another computer yet or try to change my power source but I may need a new backlight card as well. Please post if you have had similar problems after updating and suggest possible solutions.

Have you tried the Command-Option-P-R keys to reset the PRAM? (Maybe the upgrade has messed up the display settings?)
http://docs.info.apple.com/article.html?artnum=2238

Performance problems after installing XP Service Pack 3

Hello,
After upgrading my client XP-machine to Service Pack 3, I have serious performance issues working with ApEx. Firstly, establishing the connection to the ApEx Workspace and then logging in both are very slow. Navigating through the workspace works fine, however when I then open any page for editing and/or try to run it, again it is very slow. As we work with PL/sql Embedded gateway I have changed the parameter SHARED_SERVERS to 10, but this did not make any difference. Remotely connecting to this server in other ways such as ping, connecting to xmlpserver, mapping network drives and connecting to the database all work fine.
My collegues also working witk Service Pack 3 have no performance issues. However when I performed a rollback of the XP Service Pack 3, the performance issue was gone!
Does anyone know of any issues similar to this problem?
Regards,
Ben van Dort

This issue is probably related to an update of InternetExplorer by Service Pack 3. Working with Firefox instead of IE gives no performance problems whatsoever.
Version of IE after Service Pack 3: 6.0.2900.5512.xpsp_sp3_gdr.080814-1236CO
Ben

MacBook Pro 13" (2011 late). second display problem after update

Updated to mountain lion this second and there is no signal out (thunderbolt to displayport cable) since ive upgraded. in lion there are no problems. does your external display work after upgrade to mountain lion?
(monitor HP ZR24w)

Does your Macbook Flash Blue at all? I have the same thing, and it won't even flash blue

Display problems after update

I recently updated- on balance things went ok-
How ever for some odd reason something is causing KDE (3.5) to behave oddly-
I used to have a app in the kde control panel that'd let me fine tune settings (fonts and display size for instance)- I see the app but not how to fine tune the settings other than for gamma and color-
I can use the nvidia-tools to do some of that- however something is causing my directories to display incorrectly meening that when double click on say- /home/(username here)/ I have a big fat square block where files used to be- and any window moving over that gets fairly well corupted.
I can sort of work around this by changing from"icon view"- to info list view.
I'm not sure how to fix this
Anyway any kind of direction at all about what's causing this problem is great.

I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.

Font display problem after updating to 10.5.5

After updating to 10.5.5, I have an identical font problem on two different machines: an iMac and a Macbook. The problem concerns font display on the screen and only occurs when viewing PDF files using Leopard's built-in facilities. So the problem shows up in Preview and in Safari, but not when viewing the same file in Adobe Acrobat. (There's also no problem with the same font in MS Word.)
The problem: Many italic characters in Times New Roman Italic display with (more or less) vertical strokes are rendered very thin. The result is a bizarre, distracting effect. The result is particularly noticeable with lowercase "o", but is widespread. I don't have the same problem with plain Times. It's possible other fonts have this too -- I haven't checked them all -- but most don't.
The problem appears to be related to anti-aliasing. When I turn this off in Preview, the display is of course not pretty, but the problem is otherwise entirely gone. (Times New Roman text and Times text now look basically the same.)
I've tried obvious things along the way: reinstalling the font from the system disk, flushing the font cache, etc. even reinstalling the 10.5.5 combo update. Nothing helps.
Any suggestions?
(Here is a PDF file on the web that has this problem for me -- in case you want to check whether you have it too: http://www.latrobe.edu.au/linguistics/LaTrobePapersinLinguistics/Vol%2009/07Popo vic.pdf. Nothing special about this file, though. Any PDF in Times New Roman with italics has the problem for me.)

V.K. --
Boy, I'm hoping Kurt will come in here,
but the page linked shows up perfect on my iMac.
I have yet to update to 10.5.5. I'm at 10.5.4.
But for you guys, what the h*ll?
I'll be back after I update.
(Boy, if only the Powers That Be knew how much we go through being helpers on these boards, eh???

Sync Problems After Installing Vista Service Pack 1

I just installed Vista service pack 1. Hotsync ceased to work. So, after checking Palm online help, I downloaded and installed Desktop 6.2 and Hotsync 7. The instructions said not to uninstall my previous version of Desktop 4.2 and Hotsync 6.01. After completing the installation, I find that my data had not been moved to the new location and that some Hotsync items had changed such as Quick Intall to Install. And, I still can't Hotsync. So, here's a series of questions:
How can I get my data over to Desktop 6.2?
Do I want to move the data over or should I reinstall Desktop 4.2? (I use an XP machine to print my schedule and usually simply copy the user folder from the Vista system to the XP system. There's no Vista print driver available for my hp printer.)
Is Palm trying to become Microsoft by changing where they store information to the confusion of a power user?
Any and all help would be appreciated.
Post relates to: Palm Vx

The version 6.2 of Palm desktop does not support your Vx.
Click here for the support page for 6.2; http://www.palm.com/us/support/downloads/windesk62.html
The only handhelds supported are Palm TX, Z22; Tungsten E2.
You will need to install the version that is on the CD that came with the Vx. You will need to "clean" uninstall Palm desktop on the Vista PC in order to re-install the older version of Palm desktop.
First thing to consider is, where is the current data. On the device or in the PC?
If you have the data in Palm desktop 6.2, do an export of the data for backup. After the re-install of the older palm desktop, import the data for each category. Since you are still using the XP PC and has data on that system, you can export the data from that PC.
In Vista, the userfolder is in documents-palm os desktop. One caveat here, the data format in the 6.2 user folder is not compatible with the data format in earlier versions of Palm desktop so you cannot copy and paste the entire user folder into the older version of Palm desktop.
Here is a procedure for backing up your data.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
To do the "clean" uninstall on the Vista PC, here are the instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Disregard the first step above because your data is on the XP PC and we are just going to import the data.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Orcale not connect after updating to service pack 6 from 5?

i have a machine running windows NT 4.0 as client connecting to oracle server, i just had to upgrade to service pack 6a, all other thing are ok thereafter but the i am not able to connect with oracle server running 8i ver. 8.1.6 and gives tns 12571 packet wiriter fialure error.
Anybody know any workaround? i did tried to install the sql again but of no use. Any help will be appriciated?
thanks

I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

HT5313 Second Display Problem after Update v10.7.5

I just updated my MacBook Pro (Late 2011) and the new OS 10.7.5 is not recognizing my second display (VGA connected emachines 19''). I have restarted, changed the resolution, and tried many things, but the display that was working perfectly two hours ago now does not work. Help pls

Hi There,
I suggested the solution on the link you refer (to solve this type of problem with gfxCardStatus)... unfortunately this solution did not solve the problem when upgrading to the 10.7.5, namely the new "supplemental update" that was released on the 4th of October (http://support.apple.com/kb/DL1599).
Here is a simple procedure I followed and solved the problem for me... this worked by chance after starting following the instructions in: https://discussions.apple.com/message/19979833#19979833.
Restart your machine and, when the machine is in booting press "alt" (left option) to show a booting menu.
Select "recovery mode" (do this with the external display connected)
In the recovery mode you can test if the external display is detected (it should work normally)
Do not do anything in the recovery mode... simply Restart you machine (now in normal mode)
It should work normally now... (at least it worked for me)
I think this has to do with a kind of "reset" on the external displays configurations... But I still do not fully understand why this happened.
I hope this helps some people! Cheers!

Bluetooth problem after update to lollipop

Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected . PLEASE HEEELP !

Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
- Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.

Mythbackend problem after update

I am facing the following problem after updating mythtv.
The installed packages are:
sip03ds ~ $ sudo yaourt -Ss mythtv | grep installed
extra/mythmusic 0.21-3 [installed] (mythtv-extras)
extra/mythtv 0.22-3 [installed] (pvr)
extra/mythvideo 0.21-2 [installed] (mythtv-extras)
extra/nuvexport 20090413-1 [installed]
after updating mythtv the backend refuses to start. Even though is displays that it is starting normally:
sip03ds ~ $ sudo /etc/rc.d/mythbackend start
:: Starting MythTV Backend [DONE]
sip03ds ~ $
for some reason it shows that the backend is unavailable.
sip03ds ~ $ mythfrontend
2009-11-21 10:32:59.615 mythfrontend version: tags/release-0-22 [0.22] www.mythtv.org
2009-11-21 10:32:59.668 Using runtime prefix = /usr
2009-11-21 10:32:59.668 Using configuration directory = /home/sip03ds/.mythtv
2009-11-21 10:33:00.548 Empty LocalHostName.
2009-11-21 10:33:00.549 Using localhost value of htpc
2009-11-21 10:33:00.570 New DB connection, total: 1
2009-11-21 10:33:00.587 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.588 Could not open settings file /home/sip03ds/.mythtv/config.xml for writing
2009-11-21 10:33:00.588 Closing DB connection named 'DBManager0'
2009-11-21 10:33:00.631 ScreenSaverX11Private: Gnome screen saver support enabled
2009-11-21 10:33:00.667 DPMS is active.
2009-11-21 10:33:00.710 Primary screen: 0.
2009-11-21 10:33:00.719 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.723 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:00.823 MythUI Image Cache size set to 20971520 bytes
2009-11-21 10:33:00.824 Enabled verbose msgs: important general
2009-11-21 10:33:00.889 Starting mythlcdserver
QWidget: Cannot create a QWidget when no GUI is being used
2009-11-21 10:33:01.408 Connecting to lcd server: localhost:6545 (try 1 of 10)
2009-11-21 10:33:01.911 Connecting to lcd server: localhost:6545 (try 2 of 10)
2009-11-21 10:33:02.412 Connecting to lcd server: localhost:6545 (try 3 of 10)
2009-11-21 10:33:02.913 Connecting to lcd server: localhost:6545 (try 4 of 10)
2009-11-21 10:33:03.414 Connecting to lcd server: localhost:6545 (try 5 of 10)
2009-11-21 10:33:03.915 Connecting to lcd server: localhost:6545 (try 6 of 10)
2009-11-21 10:33:04.416 Connecting to lcd server: localhost:6545 (try 7 of 10)
2009-11-21 10:33:04.917 Connecting to lcd server: localhost:6545 (try 8 of 10)
2009-11-21 10:33:05.417 Connecting to lcd server: localhost:6545 (try 9 of 10)
2009-11-21 10:33:05.918 Connecting to lcd server: localhost:6545 (try 10 of 10)
2009-11-21 10:33:06.471 Primary screen: 0.
2009-11-21 10:33:06.473 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:06.475 Using theme base resolution of 800x600
2009-11-21 10:33:06.500 LIRC, Error: Failed to connect to Unix socket '/var/run/lirc/lircd'
eno: No such file or directory (2)
2009-11-21 10:33:06.500 JoystickMenuThread Error: Joystick disabled - Failed to read /home/sip03ds/.mythtv/joystickmenurc
2009-11-21 10:33:08.531 Using the Qt painter
2009-11-21 10:33:08.535 Removing stale cache dir: /home/sip03ds/.mythtv/themecache/MythCenter-wide.1280.800
2009-11-21 10:33:08.557 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml
2009-11-21 10:33:08.891 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
2009-11-21 10:33:08.897 New DB connection, total: 2
2009-11-21 10:33:08.897 New DB connection, total: 3
2009-11-21 10:33:08.902 New DB connection, total: 4
2009-11-21 10:33:08.906 Current MythTV Schema Version (DBSchemaVer): 1244
2009-11-21 10:33:08.910 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.926 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.927 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:09.589 Desktop video mode: 1280x800 59.9125 Hz
2009-11-21 10:33:10.602 Registering Internal as a media playback plugin.
2009-11-21 10:33:10.958 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythmusic.so: undefined symbol: _ZNK15ComboBoxSetting9classNameEv
2009-11-21 10:33:10.958 Unable to initialize plugin 'mythmusic'.
2009-11-21 10:33:11.230 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythvideo.so: undefined symbol: _ZNK7Setting9classNameEv
2009-11-21 10:33:11.230 Unable to initialize plugin 'mythvideo'.
2009-11-21 10:33:11.248 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
eno: No such file or directory (2)
2009-11-21 10:33:11.259 MMUnix::AddDevice() Error: failed to stat /dev/power,
eno: No such file or directory (2)
2009-11-21 10:33:11.271 Loading window theme from /usr/share/mythtv/themes/MythCenter/menu-ui.xml
2009-11-21 10:33:11.377 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
2009-11-21 10:33:11.381 Found mainmenu.xml for theme 'MythCenter'
Any ideas or logs where to check would be more that appreciated.
Thanks
Last edited by sip03ds (2009-11-21 09:40:36)

I removed all the plugins and reinstalled mythtv. Configured it as advised on the wiki (without dropping the database schema) but the server is still not starting up correctly.
I found out that the server is starting and and stopping when I run:
sudo /etc/rc.d/mythbackend start
when I start the front end, the front end cannot connect to the back end because it is unavailable.
in case I start the server manually:
sudo mythbackend
I am able to connect via mythfrontend and mythtv is working correctly. Any suggestions to change the daemon script ?
Last edited by sip03ds (2009-11-21 22:56:51)

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Unlock problem after update to iOS 7.1.1

I'm wondering is anyone of you encounter above mentioned problem after update to iOS 7.1.1.
Usually will switch off the phone during sleeping time, today woke up urn it on and wanted to check mail, the screen is freeze when enter the passcode.
Even try calling in with another phone also unable to get through. Passcode unable to key and stop at the 'enter passcode' screen.
After awhile it show the "apple" icon and turn off.
Any solutons to solve it?

iPhone is unresponsive and displays the Apple Logo
Review this article: iOS: Unable to update or restore.

Display problem after update XP service pack 2

Similar Messages

Maybe you are looking for