Display Problem - Video noise with 15" Powerbook and 23" Studio Display

I just bought a used 23" Studio Display to act as a second monitor for my 1.0 GHz 15" Powerbook. In my set up, the display is rather noisy -- there are consistant flickering lines of white pixels throughout the display. The lines are worst in dark areas, though they may just be showing up under contrast. The Powerbook it is connected to still looks normal.
The first strange thing is that the display works perfectly with another 1.25 GHz 15" Powerbook I have to test it on. In both cases, I have connected the monitor to the Powerbooks with a new Apple brand powered DVI to ADV Adapter.
The second strange thing is that the display seemed to act fine until I reinstalled my Wacom tablet driver so that it would work with dual displays. I've uninstalled the driver, but it the problem is still there.
The third strange thing is that the display is fine while booting up. The blue boot up screen is very crisp looking and noiseless. It only starts showing noise when the login screen shows up.
Any thoughts about what may be causing the problem or how to fix it would be appreciated.
Thanks.
angus.
Powerbook 15" G5 dual 2.0 Mac OS X (10.4.7) 23" studio display

Well I called AppleCare yesterday and, believe it or not, we actually got the USB ports acting normally - well at least I can boot up with the keyboard plugged into the back of the monitor.
They had me reset the Open Firmware and that seemed to do the trick. Of course, the night before I updated to 10.4.10 so that may have had something to do with it, too. No idea.
As for the power sensor button thing, they wanted me to plug the monitor into a different system, either at a Genius Bar or a friend or whatnot to see if it would behave in the same manner - not wanting to activate. I took it to school with me and hooked it up to one of my teacher's G5 and it behaved the same way. It took like 15 times touching the sensor to bring the system up.
So I'll be calling them back and see where they want to go with this. Maybe I'll get lucky and get a new shiny monitor - or not...

Similar Messages

Ichat video works with some people and not others

Can someone help me? I can video Ichat with some people and not others. HOwever, if the people I can video ichat with put me in a three way chat with someone I can't Icaht video with, it works. Here is the first half of the error I get when I try to call someone with whom it doesn't work:
Date/Time: 2008-05-08 20:59:35.554 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-05-08 20:59:21 -0400: AVChat started with ID 2203145046.
2008-05-08 20:59:21 -0400: scddean8: State change from AVChatNoState to AVChatStateWaiting.
2008-05-08 20:59:21 -0400: 0x1946a450: State change from AVChatNoState to AVChatStateInvited.
2008-05-08 20:59:24 -0400: 0x1946a450: State change from AVChatStateInvited to AVChatStateConnecting.
2008-05-08 20:59:24 -0400: scddean8: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-05-08 20:59:32 -0400: 0x1946a450: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: 0x1946a450: Error -7 (0x1946a450 cancelled the connection.)
2008-05-08 20:59:32 -0400: scddean8: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: scddean8: Error -7 (0x1946a450 cancelled the connection.)
Video Conference Error Report:
950.806728 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.000000 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK253ca464241b86c5
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 443
v=0
o=SDEAN 0 0 IN IP4 68.109.25.62
s=skiier526121
c=IN IP4 68.109.25.62
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 110
a=rtcp:16402
a=rtpmap:110 X-AAC_LD/22050
a=rtpID:163897054
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:160:120:320:240
a=framerate:20
a=rtpID:4247390608
0.130320 @SIP/Transport.c:347 type=2 (00000000/0)
[ACK sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK758f935e51030677
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.3
Content-Length: 0
0.131540 @SIP/Transport.c:2362 type=1 (00000000/0)
[SUBSCRIBE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.258925 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>;isfocus
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.266139 @SIP/Transport.c:347 type=2 (00000000/0)
[NOTIFY sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]:16402>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.3
Content-Type: application/conference-info+xml
Content-Length: 0
[<c-i v="0" st="f" en="sip:user@lip:16402">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
0.267647 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.3
Content-Length: 0
0.489410 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from 24.9.170.64:16402]
0.809558 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=98115.00, NSDev=6.54%]
1.049428 @:0 type=1 (00000000/1)
[Bandwidth Detection]
[Avg=1063830.90, NSDev=55.48%]
1.396681 @:0 type=1 (00000000/2)
[Bandwidth Detection]
[Avg=1218589.60, NSDev=19.06%]
1.555003 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 8
[SECUPD:0]
1.555264 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
22.411383 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
22.552977 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
23.667085 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
23.667857 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0

I found the following comment the other day that goes some way to explaining why iChat might have problems with some NAT routers:
http://www.technologyevangelist.com/2007/02/ichatav_the_bestun.html#comment-53326
While it doesn't offer any solutions it might be worth firing off some iChat feedback to Apple referencing it. It seems like it might be a trivial bug for Apple to fix and could well alleviate many of the problems people are having.
In the mean time if your router is one that has SIP ALG you could try disabling it and forwarding all relevant ports to your machine.

Problem in Multisim with transient analysis and initial conditions

Hello everyone,
I have a problem in multisim with transient analysis and initial conditions.
If I do transient analysis with automatically determined initial conditions the circuits works.
If I do transient analysis with user-defined initial conditions the circuits works in cases.
--Working with user-defined---
*## Multisim Component V2 ##*
vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
*## Multisim Component R1 ##*
rR1 3 0 10000 vresR1
.model vresR1 r( )
--Working with user-defined----------
*## Multisim Component V2 ##*
vV2 1 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
*## Multisim Component U1 ##*
xU1 1 0 MEMRISTOR__MEMS__1__1
--Not Working with user-defined-------
*## Multisim Component V2 ##*
vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} -3)
*## Multisim Component R1 ##*
rR1 3 1 10000 vresR1
.model vresR1 r( )
*## Multisim Component U1 ##*
xU1 1 0 MEMRISTOR__MEMS__1__1
The costum component includes something like that:
.subckt MEMRISTOR__MEMS__1__1 plus minus PARAMS:
*Parameters values
+rmin=100 rmax=390 rinit=390 alpha=1E3 beta=0 gamma=0.1 VtR=1.5 VtL=-1.5 yo=0.0001
+m=82 fo=310 Lo=5
blah blah ...
.ends Memristor
Namely, if I combine the resistor and my custom component in one circuit, transient analysis with user defined initial conditions gives an error (timestep too small).

Hi Nik,
If possible, please post the Multisim file. This way, I can get access to all your settings.
Tien P.
National Instruments

Video noise with Powerbook 15" and 23" Studio Display

I just bought a used 23" Studio Display to act as a second monitor for my 1.0 GHz 15" Powerbook. In my set up, the display is rather noisy -- there are consistant flickering lines of white pixels throughout the display. The lines are worst in dark areas, though they may just be showing up under contrast. The Powerbook it is connected to still looks normal.
The first strange thing is that the display works perfectly with another 1.25 GHz 15" Powerbook I have to test it on. In both cases, I have connected the monitor to the Powerbooks with a new Apple brand powered DVI to ADV Adapter.
The second strange thing is that the display seemed to act fine until I reinstalled my Wacom tablet driver so that it would work with dual displays. I've uninstalled the driver, but it the problem is still there.
The third strange thing is that the display is fine while booting up. The blue boot up screen is very crisp looking and noiseless. It only starts showing noise when the login screen shows up.
Any thoughts about what may be causing the problem or how to fix it would be appreciated.
Thanks.
angus.
Powerbook 15" G5 dual 2.0 Mac OS X (10.4.7) 23" studio display

It's plug and play, so that's not an issue.
The debate about running the clamshell closed is so that, if the extra desktop space is not required, there is no point "stressing" the video ram and videocard and cpu by having the other display running - all resources can turn to the external display.
As for extending the desktop, yes you can do that with Photoshop - you have the space of the PB and the new display, entirely up to you what you put where - just drag across.
Performance wise, I don't imagine that Photoshop would cause as many difficulties as say video editing might, and I've not come across anyone saying that they have had performance issues from running the extra display - you may get some extra heat as the processor is taxed though.
If in doubt, you could test at an Apple Store or reseller.
Also, you might find getting extra ram a useful upgrade.
Hope that helps, best of luck.

Problems with recordset paging and dynamic menu displaying all the options

Hi hope someone can help on this - I've posted the code on the FoEd Backend Blight - with no takers/success yet -
I've created a jobs page using DWCS3 which has a dynamic drop down menu filtering the 'countries' that jobs are located in. When I introduce a recordset page only those countries associated with the jobs on that particular page are shown in the dynamic menu above, not all of the countries listed in the database. When I get to the second page of results - again - only those jobs' countries are shown in the menu (and not the previous pages/next pages as well).
I'd clearly like a user to be able to select from the menu of countries available for all the jobs in the database, and not just those on the page. Any ideas?
On a similar strain - my country menu/filter is wrapped up in a form above the list of jobs. On loading the page, only the search and menus appear. No jobs are shown until I hit submit. Is there a way to have all the jobs display on first load, and then for the search/menu filter to work on the displayed jobs. I've tried altering the variables on the search to 1 from -1, and other options but I can't seem to get a page of content on first load.
I'd really appreciate any pointers on the above, as this would help solve the final stage of my project. The full post and code can be seen on the friendsofed website under backend blight.
Many thanks in advance.
Matt

I'm still stuck on getting the page to load with some actual content, however. I'm just getting the search box and country filter displaying on first load.
Pages 584-6 explain why you get nothing when a page first loads. Dreamweaver sets the default value to -1. The problem with trying to change the default value even to an empty string or % is that Dreamweaver's security function, GetSQLValueString() changes an empty string to NULL and wraps % in quotes, so neither will work.
One way to display all records when the page first loads is to create another recordset that selects all records. Wrap the code in a conditional statement that checks whether the $_GET array contains any values:
if (!$_GET) {
// recordset to retrieve all records here
This means that you need two repeat regions to display the results. Wrap both of them in conditional statements:
if (isset($fullRecordsetName)) {
// display the full recordset
} elseif (isset($searchResultsRecordsetName)) {
// display the search results
You also need to wrap the mysql_free_result() statements in conditional statements at the end of the page:
if (isset($fullRecordsetName)) mysql_free_result($fullRecordsetName);
if (isset($searchResultsRecordsetName)) mysql_free_result($searchResultsRecordsetName);
Another way to do it is to use just one recordset, but split the SQL query into two sections:
$query_RecordsetName = "SELECT * FROM myTable";
if (isset($_GET['searchTerm')) {
$query_RecordsetName .= sprintf(" WHERE searchTerm LIKE %s",
GetSQLValueString("%" . $colname_RecordsetName . "%", "text"));
This uses the combined concatenation operator to add the WHERE clause to the query only if $_GET['searchTerm'] has been set. Notice that you need a space before the "WHERE".

Macbook Pro video issue with multiple Monitors and Powerpoint 2011

Hello all,
I have a major issue that is perplexing me. Whenever I hook up a second monitor or projector to my Macbook Pro 15" Early 2010 and launch a Powerpoint slideshow I lose video on both systems immediately and can only recover with a reboot. This is fully reproducable. It doesn't matter if I'm using the mini Display Port to DVI or VGA adapter, same results. Same results with monitors, TVs, or external projectors. I only experience this issue in MS Powerpoint 2011, no other applications. I have 8GB of Ram and a 2.66GHZ i7. It doesn't matter what my resolution is set to, same issue. I will post two error reports below for additional details.
Thank you for the help,
Eric
Interval Since Last Panic Report: 1489459 sec
Panics Since Last Report: 5
Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
Thu Mar 3 18:08:35 2011
panic(cpu 0 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5ea3000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x83701768 : 0x21b50c (0x5d4438 0x8370179c 0x223974 0x0)
0x837017b8 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
0x83701858 : 0xaee640 (0xe9c5c04 0xd551004 0x100 0xae881b)
0x837018a8 : 0xae5639 (0xd551004 0x100 0x837018d8 0x9c36d7)
0x837018d8 : 0x17169ce (0xd551004 0x100 0x438004ee 0x3)
0x83701a18 : 0xb0d2bd (0xd551004 0xd681004 0x0 0x0)
0x83701a58 : 0x9dce63 (0xd551004 0xd681004 0x0 0x0)
0x83701af8 : 0x9d946f (0x0 0x9 0x0 0x0)
0x83701ca8 : 0x9da2b7 (0x0 0x600d600d 0x7057 0x83701ce8)
0x83701d98 : 0xc94d1c (0xc1d00044 0xbeef0003 0xcaf0133e 0xcaf01340)
0x83701eb8 : 0xc94fba (0xee95804 0x18547e04 0x6d1c6460 0x8)
0x83701f18 : 0xc952a5 (0xee95804 0x18547e04 0x6d1c6460 0x83702180)
0x83701fc8 : 0xca94a9 (0xee95804 0x1844a8e8 0x8370233c 0x83702180)
0x83702238 : 0xc8ac0b (0x6d29e000 0x1844a8e8 0x8370233c 0x83702324)
0x83702398 : 0xc8ae49 (0x6d1de000 0x1844a800 0x1 0x0)
0x837023c8 : 0xc8d90a (0x6d1de000 0x1844a800 0x1 0x9e9de118)
0x83702408 : 0xcafb4e (0x6d1de000 0x1844a800 0x6d3f2274 0x140)
0x83702498 : 0xca13c1 (0x1855ec80 0x1844a800 0x0 0x1)
0x837024f8 : 0xca1628 (0x6d3f2000 0x6d3f277c 0x1844a800 0x0)
0x83702548 : 0xca1afc (0x6d3f2000 0x6d3f277c 0x8370286c 0x8370280c)
0x83702888 : 0xc9e945 (0x6d3f2000 0x6d3f277c 0x1 0x220673)
0x837028a8 : 0xc665a1 (0x6d3f2000 0x6d3f277c 0x18724240 0x500547)
0x837028d8 : 0xca0408 (0x6d3f2000 0x83702a1c 0x83702908 0x4ffa01)
0x83702918 : 0xc6a8de (0x6d3f2000 0x83702a1c 0x83702a1c 0x83702980)
0x83702a58 : 0xca3cfe (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
0x83702b08 : 0xc66c93 (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
0x83702b88 : 0x565a88 (0x6d3f2000 0x0 0x83702ddc 0x83702c14)
0x83702bd8 : 0x566327 (0xcf4e20 0x6d3f2000 0x1cac2d88 0x1)
0x83702c28 : 0x566bdb (0x6d3f2000 0x10 0x83702c70 0x0)
0x83702d48 : 0x285bce (0x6d3f2000 0x10 0x1cac2d88 0x1)
0x83703df8 : 0x21d8ba (0x1cac2d60 0x114625a0 0xfc330 0x8a03)
0x83703e38 : 0x210a3a (0x1cac2d00 0x0 0x1cab2ce0 0x10599fc0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
com.apple.nvidia.nv50hal(6.2.6)@0x15e0000->0x19f4fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 6097571436804
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x147f000, size 0x65536) - last unloaded 133585664378
loaded kexts:
com.aventail.xgfilt.kext 1.0 - last loaded 362791442640
com.aventail.tun.kext 1.0
com.google.filesystems.fusefs 2.0.3
com.McAfee.kext.AppProtection 1.0.0d1
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.mcafee.kext.Virex 1.0.0d1
MonitorControl.drv 1.0d3
com.apple.filesystems.udf 2.1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.GeForce 6.2.6
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
#2 Panic
Interval Since Last Panic Report: 1490834 sec
Panics Since Last Report: 7
Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
Thu Mar 3 18:30:57 2011
panic(cpu 2 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5e82000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x82f79bd8 : 0x21b50c (0x5d4438 0x82f79c0c 0x223974 0x0)
0x82f79c28 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
0x82f79cc8 : 0xaee640 (0xe4e0804 0xe624004 0x100 0x2)
0x82f79d18 : 0xae5639 (0xe624004 0x100 0x82f79d48 0x9c36d7)
0x82f79d48 : 0x171a9ce (0xe624004 0x100 0x438004ee 0x29eac3)
0x82f79e88 : 0xb0d2bd (0xe624004 0xe4db004 0x0 0x0)
0x82f79ec8 : 0x9dce63 (0xe624004 0xe4db004 0x0 0x0)
0x82f79f68 : 0x9d946f (0x0 0x9 0x0 0x0)
0x82f7a118 : 0x9db5fb (0x0 0x600d600d 0x7027 0x82f7a148)
0x82f7a1e8 : 0xc84975 (0xc1d00041 0xbeef0003 0x18512500 0x71)
0x82f7a288 : 0xc84e9f (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a2c8 : 0xc5ce0b (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a2f8 : 0xc84572 (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a318 : 0xc5c418 (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a338 : 0xc84e4a (0x6d204000 0x184fc000 0x2 0x2)
0x82f7a378 : 0xc5f7b9 (0x6d204000 0x184fc000 0x0 0x184fc000)
0x82f7a3b8 : 0xc5d269 (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
0x82f7a408 : 0xcafbed (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
0x82f7a498 : 0xca13c1 (0x1808d400 0x184fc000 0x0 0x1)
0x82f7a4f8 : 0xca1628 (0x6d3cf000 0x6d3cf77c 0x184fc000 0x0)
0x82f7a548 : 0xca1afc (0x6d3cf000 0x6d3cf77c 0x82f7a86c 0x82f7a80c)
0x82f7a888 : 0xc9e945 (0x6d3cf000 0x6d3cf77c 0x1 0x220673)
0x82f7a8a8 : 0xc665a1 (0x6d3cf000 0x6d3cf77c 0x18513100 0x500547)
0x82f7a8d8 : 0xca0408 (0x6d3cf000 0x82f7aa1c 0x82f7a908 0x6d3cf000)
0x82f7a918 : 0xc6a8de (0x6d3cf000 0x82f7aa1c 0x82f7aa1c 0x82f7a980)
0x82f7aa58 : 0xca3cfe (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
0x82f7ab08 : 0xc66c93 (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
0x82f7ab88 : 0x565a88 (0x6d3cf000 0x0 0x82f7addc 0x82f7ac14)
0x82f7abd8 : 0x566327 (0xcf4e20 0x6d3cf000 0x17ce2188 0x1)
0x82f7ac28 : 0x566bdb (0x6d3cf000 0x10 0x82f7ac70 0x0)
0x82f7ad48 : 0x285bce (0x6d3cf000 0x10 0x17ce2188 0x1)
0x82f7bdf8 : 0x21d8ba (0x17ce2160 0x1720f5a0 0x1fd590 0xa017)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.2.6)@0x15e4000->0x19f8fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 404911465926
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1483000, size 0x65536) - last unloaded 107949333800
loaded kexts:
com.google.filesystems.fusefs 2.0.3 - last loaded 376650877354
com.McAfee.kext.AppProtection 1.0.0d1
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.mcafee.kext.Virex 1.0.0d1
MonitorControl.drv 1.0d3
com.apple.filesystems.udf 2.1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.GeForce 6.2.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.NVDAResman 6.2.6
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000

I "fixed" it, I did a fresh install and restore and that power point issue is gone. It works now without crashing but I am using Snow Leopard 10.6.4 now instead of 10.6.7. I'm going to update and see what happens.

Why does my iPhone 4 not charge correctly? Problem is definitely with the phone and not charges or chords. Phone will charge but very slowly and no icon comes on. Computer and iTunes doesn't recognize it a being connected.

My iPhone 4 quit charging correctly. It does charge but very slowly and icon doesn't indicate it as charging. I've checked cables and charges and the problem is definetily with the phone. My car stereo no longer recognizes it as a device. Neither does the computer. The real strange thing to me is that when I plug it into my old klispch speaker dock it will play songs. My battery life is good when it is charged so I don't think its the battery. I've tried resetting the phone and cleaning the charging port. I'm out of warranty.
Would disconnecting the battery possibly reset it from some glitch or is the charging port got some bad contacts?

I checked with the Genius Bar. It was a new dilema to the lady that was helping me. She took it to a back room and worked on it but it came out the same. She gave me some options for repair or credit for replacement.
I just kept the phone and put up with slowly charging it by plugging it in and then turning it off.
I couldn't transfer anything from itunes.
I finally got fed up and bought a new charging port for $10. and a toolkit for $3. I looked up a video on youTube for the replacement and did it.
That solved all the problems, it was the charging port, must have been some bad pins or something because it patially worked.

Create previews of video clips with multiple thumbnail and export in html?

Hi all!
I am trying to make a list of the videos that i have shot with my digital camera....my 1Tb is almost full, so you can understand that is not that easy as looking into a folder with the big thumbnails
this is the expectation: to find an app that can
-create a preview of each video (qt, mov, m4v, wmv, avi, rm, etc)
-create few frames that shows the content of the video
-export the list of movies as web page, with the title of the video and the snapshot for each of them
Do you know if there is any way to achieve this result, without making manually everything?
I've found a software on pc, that i can use with parallels, but it takes just 1 shot of the video, and not multiple, with the result that is hard to get what is in the video, especially when the video is 10-15 min long, and the name doesn't help to recall what was happening in that video
Is there a way to achieve these results with just the apps available on the OS or is there an external sofware to do that?
thanks!

This is how i resolved:
I use a software called screen grabber, that reads video files and makes a sheet with previews
then i use thumbsplus on parallels to load these sheets and create an html page with the sheets and thumbnails.
Takes some time, is kinda cumbersome, but this gives me nice html pages with previews taht ar clickable (so you can see the full size sheet with the video preview).
Maybe someone else will stumble on the same problem that i had and find something better than my solution

Video Chat with Macbook Pro and Macbook

Hi,
IM have a problem with video chatting with my macbook pro, all my internet connections are fine, my camera is fine, and so is my audio. I can start video chats with my friends who have regular laptops that have windows xp/vista over aim. I just cant seem to get it started with my cousin who has a macbook. Can any one please help me? I've been struggling for a long time.
Thank You
P.S. The error states that it was a communication error and that my cousin cancelled the connection(which she didnt).

Denial of Service and Stateful Packet Inspection.
As to where they are on your device is anybody's guess as different manufacturers put them in different places.
Some like Netgear put them on the WAN page of the set up pages.
Linksys includes them in the Firewall in a tab called Security
Netopia included them as part of High and Medium settings of the firewall.
Some have them in "Intrusion Detection"
Some in a separate item in advanced.
The list goes on.....
If you tell us the device we may be able to pin it down further.
It is late here and I may not read any more til tomorrow
11:45 PM Thursday; August 21, 2008

Problems video chatting with Windows users

It seems like everytime I try and video chat with a Windows AIM user there is a problem. Ralph and other are very techy and know how to resolve these issues. Problem is that 99.9999999% of te people I chat with are not so the advice to resolve these issues proves to be worthless. However me and this individual were able to successfully do audio chat instead. Often when there is a problem like this do I switch people over to Skype which works far better going from Windows to Mac and vice versa and is easier to use. Generally I think iChat has better video quality over Skype, but only with Mac users.
I know there are others here that also have this problem and for you do I encourage the same resolution as bad as it is, but it seems to be the only way to chat with a non techy person who is on a PC.
John

Hi,
Any non Microsoft app on a PC has to allowed through the Firewall as a Exception (Or at least since Service Pack 2 for XP when Windows got a firewall).
In XP it goes like this
Open the Control Panels (I prefer the classic view)
Open the Firewall
Click the Exceptions tab
In the new window click the Add Button
Navigate through Program Files to the AIM Folder and the relevant AIM#.exe to allow the app itself. (# is the Version Master number)
Back in the Exceptions window also Allow UPnP
Enable UPnP in their Router.
I am not sure it is that different in Vista or Window 7
If there router does not have UPnP then open port 5190 and 1024-5000 (AIM video does not use all of these they are there to spread the load)
They would have to do similar things for Skype (although like AIM it has Fall Back ports below 1024 for logging in and Text Chatting that get around the firewall issue) other IM apps and On-line Games.
Of course if they are using some third party Firewall they would have to do the work there.
Audio Chats V VIdeo Chats
Both apps use the same ports when it comes to Audio and Video Chats (Tend to be the iChat ones)
I believe AIM still uses 4 ports (from the 1024-5000 range) for VId In, Vid Out, Audio In, Audio out, much the same way iChat 2 and 3 did.
It may pay for you to go to iChat > Preferences > Video Section > Bandwidth limit and try either 500kbps or 200kbps as the setting.
In earlier version of AIM (5.5 anbd 5.9) it was possible to reduce the Video quality at the AIM end (less frames per second) which allowed "Space" for the Audio part.
AIM 6.x onwards does not have this and the Video feed can be particularly Processor hungry. Your lower setting will be fed back to them and their end will make an adjustment of what can be sent.
Some of this knowledge has taken me since 2004 to acquire.
I can see that applying it might be considered "techy"
I can appreciate that it can be very difficult to persuade a Windows user to change any setting once they have their machine "working" (at least as they want).
I realise this was not so much of a Question as being more of a discussion statement.
I am not sure that there is a real answer other than the one you suggest.
10:35 PM Wednesday; August 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Problem Video Chat with AIM

I am having problems trying to video chat with someone on AIM (windows)
When I select video call they receive the accept message and accept.
I get that they accepted and starting video chat but then says the remove user declined.
The remote user says they get a timeout error.
Any ideas what might be the issue?

Hi,
AIM since they went above version AIM 5.9 has become more difficult.
The AIM on PC person needs to have allowed it as an Exception in the Windows Firewall.
If they are using a version with "Real Time" it seems to do better to iChat if this is turned Off.
Check your routing device is Not Ping Blocking.
9:23 PM Saturday; August 29, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

3 Monitors with 1 iMac and 2 Cinema Displays conected to Windows Gaming PC Help!

Hi
I want to set up a 3 monitor gaming set up with 1 iMac in the middle and 2 cinema displays either side. This would be a tripple monitor set up.
I am looking to set up a new computer and i want to have 3 monitors. I also want to have an iMac so i want the iMac in the middle and two cinima displays next to each other. i Want to also conect these monitors with a Windows 7 gaming PC.
I want to hook up my very powerfull windows 7 gaming computer wich has 3 SLI GTX 560 EVGA cards. These cards have a display port output.
So i want to run 3 monitors from my gaming machine and i also want to have my iMac use the 3 monitors aswell. I also want to take advantage of the full, maximum resolution. I would get the thunderbolt cinema display monitors.
Gaming comupter has 3 display ports so i need to connect each graphics card to one of the monitors. I then need to conect the two cinema displays to the middle iMac.
I have not bought anything yet i just need to know if i can do this. Need to know stuff like what adapers to buy and what compatabilties.
I need to know if this is posible and how i would do it.
Thanks

Could i use some of these cables?
It says they are thunderbolt conpatable.
http://www.macfixit.com.au/shop/index.php?_a=viewCat&catId=229
http://www.macfixit.com.au/shop/index.php?_a=viewProd&productId=2444

Problems sending emails with iPhone 3G and outlook exchange

I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
Any help much appreciated

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Newb- Video conferencing with Windows possible and with what Win app?

Giving video conferencing a shot for the first time. Is it possible to video conference with my (mostly) Windows using friends? If so, what program do they need?

No Problem.
For the points
8:03 PM Monday; October 5, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Can't play .tod video files with QuickTime X and Lion

I have a JVC Everio videocamera that generates .tod files in HD. With MacOs Leopard and QuickTime 7 I had to install the Everio component for QuickTime and it worked, so I could watch the videos in QuickTime and import them to iMovie HD. But with QuickTime X and MacOs Lion I cannot do any of those, and I cannot even install the Everio component. If I change the extension from .tod to .mpeg, QuickTime can reproduce it, but I cannot import the file either to iMovie HD or to iMovie of Lion.
Any suggestion?? I would rather prefer not to have to convert the files before importing due to time spent and to possible loss of quality.

MikelMadrid wrote:
I have a JVC Everio videocamera that generates .tod files in HD. With MacOs Leopard and QuickTime 7 I had to install the Everio component for QuickTime and it worked, so I could watch the videos in QuickTime and import them to iMovie HD. But with QuickTime X and MacOs Lion I cannot do any of those, and I cannot even install the Everio component. If I change the extension from .tod to .mpeg, QuickTime can reproduce it, but I cannot import the file either to iMovie HD or to iMovie of Lion.
Any suggestion?? I would rather prefer not to have to convert the files before importing due to time spent and to possible loss of quality.
.TOD is as you imply a JVC video format. It contains MPEG2 video and MPEG1 audio which makes it similar but not identical to what might be on a DVD.
MPEG Streamclip for Mac (free) can read .TOD files and save them to other formats, including more standard MPEG2 formats. However in this case MPEG Streamclip is still going to require the chargeable Apple MPEG2 QuickTime Component. Using MPEG Streamclip to convert to say a standard .m2v and .m1a pair of files would not lose any quality as you are merely changing the container and not the video and audio, if you changed to H.264 then you would potentially lose some quality.
It is still possible to install QuickTime 7 on Lion and QuickTime 7 will work with older style QuickTime components, possible including the JVC TOD one. You need to download and install QuickTime 7 from here http://support.apple.com/kb/DL923
This link may also be of use http://www2.cli.co.jp/products/ne/update_qtc_for_gzhd7/qtc3e_update.htm
Note: If the JVC QuickTime component is only written for PowerPC chips it will never work on a Mac running Lion, in view of the apparent considerable age of Everio cameras this seems likely.

Display Problem - Video noise with 15" Powerbook and 23" Studio Display

Similar Messages

Maybe you are looking for