Display problems on android and apple
hello, I made a photo gallery with Abode Edge and had trouble display it on: Android smartphones, Apple iphone, iPad, ect.
May depend on the total weight of the photo gallery?
Is there a way to make it work properly?
Hi Stefan,
This is the content from a feedback form that appears when you visit some of the pages on the Adobe website. Is there any other information that you need?
Thanks,
Preran
Similar Messages
-
Can't send messages to friends on BBM Android and Apple
Recently many of my friends added me to their new Android and Apple BBM applications.
It all worked fine yesterday. Today, they can send me messages but all my replies are marked with an X so non deliverable.
Any known issues or are there any current things I can try? I tried deleting them and re-inviting but no success.
Thanks in advance.
Dan
Device: Bold 9900
Up to date OSHi,
wish i could help you but it looks like we've been left out to dry.
well over a month since this problems started and as far as i can see BB have not acknowledged the problem nor offered a solution. -
Image display problem in safari and app store
i have problem as pictures appears pixelated in safari and app store i tried to adjust display settings but there is no difference
file:///Users/macbookair/Desktop/Screen%20Shot%202013-12-30%20at%207.08.03%20PM. pngReset PRAM. http://support.apple.com/kb/PH4405
Best. -
Dual Display Problem - Mac Pro / 23" Apple Cinema
Hey guys, I'm having a bit of a hard time right now. Here's my situation. I'm using my Mac Pro with a primary HD Apple Cinema Display 23". I just recently stumbled upon a Sony HS95P. I've used this monitor before as a second display a few years back. I bought a " DVI 24+1 male to VGA female adapter DVI-D DVI-I DVI-A " and plugged it into my computer, no problem. Display shows up in system preferences, when I check mirror displays it takes the resolution of the 2nd display and the Sony flashes. However no screen, Blacked on the Sony. When I set up the displays to run into eachother, I can venture my mouse over onto where the other monitor would be, however it's black on the Sony.
What could be the problem? I didn't buy the Apple adapter, but could this REALLY be that serious of an issue? I didn't use it in the past, atleast I don't think I did.. Also could it be the OS? I'm using 10.6.8. Any help or advice/things to try would be awesome... I have two DVI slots in the back of my Mac Pro, gfx card is a NVIDIA GeForce 7300 GT. Thanks guys.I'm back. Got my Mac Pro back from repair today. Ahhh...25" screen. However, they (the Apple Repair People) have put a new GeForce 8800GT in, to replace the old one.
And the final bill was $380 CDN ($40 for work, the rest for the card, around $300.)
What's Apple's policy on graphics card replacement, even if the customer is paying for it? I thought I asked for a new ATI 5770 card, but maybe I was wrong. I don't think I can take her back in and ask 'em to put a better card in there, and only ask for a bit more to cover the difference in price. I've got a feeling it doesn't work like that.....
thanks
John B -
Unibody Macbook Pro 17inch Display problems, vertical lines and artifacting
Hey everybody
I bought my 17inch MBP at B&H in June (week before WWDC, D'oh) and it was working fine until I came over to Ireland to work on a editing job for the summer, as soon as I attached it via mini display to a second monitor I started getting artifacts and vertical lines in certain shades and colours on the macbooks display, its gradually gotten worse so much so in fact that it is nearly unusable.
I have seen the thread about the firmware update, but my computer is already up to date with that but it still has this problem, I contacted apple and was told to take it to the apple store and the genius bar in Belfast, as helpful as the rep was he told me it would be two weeks for a repair, by replacing the logic board. Which I just can't do as I've only got three weeks left on the job and need my mac every day. I've searched and it seems no-one is having this problem except me since the firmware update, but clearly my machine still has problems.
Never had a problem with all my previous Mac's but I'm close to tossing this in the bin please help because if I can't get this solved I will have to move to PC and install my copy of AVID on it as this is the only other available computers at this production company.
What to do? Has anyone else had this problem recently? Or know of a fix for it? I've tried everything downloaded the firmware told me its already installed, switched the graphics displays etc etc
Please help
Thanks
Tom Lindsay
Message was edited by: tomlindsay101Welcome to Apple Discussions!
It sounds like there is a hardware problem of some sort with the graphics chips, and the only real fix is going to be to replace the logic board. So at some point, you will have to send your Mac off for repair.
In the US, you can sometimes arrange to get a loaner. You might ask if this would be possible where you are, since the repair is going to take so long.
Unfortunately, I don't know of anything that would fix your problem other than a repair.
Good luck! -
Problem with imac and apple tv - can't view movies to buy or rent, tv etc
I also am unable to view youtube and tv trailers to buy as well as movies to buy or rent! My apple tv is now redundant!!!!!
Does anyone know how to email apple in the uk re this problem??????
Does upgrading to snow leopard help?why did you start a new thread ??
1000flossy wrote:
I also am unable to view youtube and tv trailers to buy as well as movies to buy or rent! My apple tv is now redundant!!!!!
you have a different issue then, sounds like your appletv cannot get access to the internet.
Does anyone know how to email apple in the uk re this problem??????
there's no point emailing apple, as the issue is most likely internal to your network and not a fault with the appletv.
Does upgrading to snow leopard help?
that would have no affect on the appletv being able to access the internet. -
Tty display problems with nvidia and uvesafb
I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
Now, if possible, I need to use the actual console for the purposes of module development.
I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
I'm fairly certain there are no vga or video settings in GRUB that are interfering.Output of "pacman -Qi nvidia"
Name : nvidia
Version : 343.36-2
Description : NVIDIA drivers for linux
Architecture : x86_64
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
Optional Deps : None
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 5.30 MiB
Packager : Felix Yan <[email protected]>
Build Date : Thu 11 Dec 2014 08:32:19 AM CST
Install Date : Fri 12 Dec 2014 12:10:32 AM CST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
Output "cat /boot/grub/grub.cfg"
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
set menu_color_normal=green/black
set menu_color_highlight=black/green
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
insmod png
background_image -m stretch /boot/grub/archgrub.png
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Output "cat /usr/lib/modprobe.d/uvesafb.conf"
Video mode is set as "1920x1080-32".
# This file sets the parameters for uvesafb module.
# The following format should be used:
# options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
# For more details see:
# http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
options uvesafb mode_option=1920x1080-32 scroll=ywrap
This file is mirrored in /etc/modprobe.d/uvesafb.conf.
Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
---edit---
Output of "cat /etc/default/grub" in case it's helpful.
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
#GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="green/black"
GRUB_COLOR_HIGHLIGHT="black/green"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
GRUB_BACKGROUND="/boot/grub/archgrub.png"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
Also, it might help to describe the behaviour more specifically / more in depth...
The rendered part of the console occupies the same space as the GRUB boot menu.
I installed and configured virtualbox a few weeks previously.
I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
I haven't rebooted until attempting to rectify the issue with my console.
The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
Killing X doesn't - obviously - have any effect on console scale.
---/edit---
d(-_-)
Last edited by seppukuzushi (2014-12-31 14:01:23) -
Website display problems in IE and FF
hi all,
Really need some help with this website. Orginally it were
created using tables (not by me), and I have been asked to make
changes. I didnt want to redo the thing in CSS so I just added to
the tables. So far so good, I have an issue effecting the layout in
Firefox and Internet Explorer. If you check the link
http://www.acengineering.no/new_site/acc_employer.html
in both IE and FF, FF displays the layout exactly as I want it to
however IE displays the text and image blocks inwards eg, not
measuring correctly to the menu.
Does anyone have any idea how I can get IE to display the
website correctly like FF? Really really need some help here...
If this is not possible, would placing a div instead of the
main table menu suffice, and if so how would it be best to go about
this?
NB. Please excuse the inline CSS as I havent sorted this into
an external file yet. Also casually look away from the asortment
.styles; again havent got round to changing and correcting these.
1000 thx
SThe problem you have is whoever set up the tables should be
shot.
It's a very bad construction. The tables inside of the main
table
obviously add up to more than the 784px that they are
supposed to and so
IE has issue knowing what it is you want.
The easiest solution is to remove the middle nested table
(the one which
contains the iframe and image) and insert a new 1 row x 2
cols table at
840px wide in its place. Set the right cell to align right
via the
properties inspector if you're not good with code.
Then put back in the ifarme in the left cell and the image in
the right
cell.
That way it will work ok in IE.
It's a 'sticking plaster' solution. The table construction is
horrendously hideous for such a simple project.
Personally I would re-work the structure for peace of mind.
Stagtime wrote:
> hi all,
>
> Really need some help with this website. Orginally it
were created using
> tables (not by me), and I have been asked to make
changes. I didnt want to redo
> the thing in CSS so I just added to the tables. So far
so good, I have an issue
> effecting the layout in Firefox and Internet Explorer.
If you check the link
>
http://www.acengineering.no/new_site/acc_employer.html
in both IE and FF, FF
> displays the layout exactly as I want it to however IE
displays the text and
> image blocks inwards eg, not measuring correctly to the
menu.
>
> Does anyone have any idea how I can get IE to display
the website correctly
> like FF? Really really need some help here...
>
> If this is not possible, would placing a div instead of
the main table menu
> suffice, and if so how would it be best to go about
this?
>
> NB. Please excuse the inline CSS as I havent sorted this
into an external file
> yet. Also casually look away from the asortment .styles;
again havent got round
> to changing and correcting these.
>
> 1000 thx
> S
> -
When I switch to multiple displays the video transfers perfectly through my Apple TV but the audio doesn't come through unless I turn the volume all the way up to it's maximum level, and at that, it's hardly discernible.
Hi Pommedaddy!
Try using the following article to help you troubleshoot this Apple TV audio issue:
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Unusual Problem with Yahoo and Apple Mail
I hope it doesn't turn out that the user is the thing that is "unusual."
Background:
Devices: MBP, iPad, iPhone, iMac
Mail accounts: Gmail, mobileme, Yahoo
MBP settings: uses "default ports", SSL, and user name and password - Advanced Tab: Port 993 and SSL
iPad/iPhone settings: SMTP server settings - grayed-out - with SSL checked and Port 465
As of last night, I found four messages that were stuck in my Sent box, with the spinning gear that would not stop. This only happens when using my Yahoo account, and it only happens when sent from my MPB. It is also only related to outbound messages.
Now for the part that has me perplexed. My password for Yahoo (web), is the same as the password on my MBP (Apple Mail). The passwords that I have on the iPhone and iPad, are the same for both, but they're different than the password for the previous two that I mentioned. When I changed the password on my MBP to match the one that's on my mobile devices, it came up with an error for an incorrect username or password.
How can I have different passwords and still have mail working? What am I missing? Also - more to the point of my issue, can anyone offer some suggestions as to why the outbound side of Apple Mail, is not working for Yahoo?
Thank you.Sorry...it's too bad you can't delete questions... Problem solved - port number needed to be changed, and the password was deleted for some reason. I still don't know why I see two different passwords for the same account.... Thanks for looking.
-
Late 2011 model display problems: white screen and shuts off on its own
A few days ago my macbook pro (late 2011 model) starting going nuts. The screen would turn white or become pixelated all the sudden, even if all i'm running is Chrome. The laptop is not over heated. This is what would happen:
Screen goes white or become pixilated
Computer shuts off on its own after a moment
Attempt to reboot, stuck on apple logo screen (pixilated)
Shuts off on its own again
The only way to reboot is through safe mode.
I've tried resetting SMC and running an apple hardware check.It's most likely the macbook pro 2011 denied by apple GPU problem many many others suffer from too.
you can read about it here if you have a few days.
2011 MacBook Pro and Discrete Graphics Card:
https://discussions.apple.com/thread/4766577
728 Pages long allready, still no repsonse from apple. -
Problems with indexing and Apple Loops on External Drive
Ok, so I've recently moved my entire "Apple Loops" folder to an external drive and created an alias pointing back the "Audio" folder where the apple loops folder used to reside. The problem is when I bring up the loop browser, it's not finding the loops. Do I need to move the Apple Loops Index to the external hard drive as well? I assumed by creating an alias, it would just go to my external drive.
Someone had said that it's better to use the alias for the apple loops since Logic will always go to where it expects the loops to be first. Which I'm assuming would be faster. But, if it truly doesn't matter and I should just drop all my apple loop folders one by one from my external hard drive, then I"ll do that. Anyone heard about what's faster....alias Vs. external HD direct path?
-
Problem with iTunes and Apple TV
I downloaded the latest iTunes 11.1.1 (11) and my Apple TV icon has disappeared and my MacBook Pro will no longer sync to my Apple TV.
Thank you for your assistance.
...Billyes, me too. I went to play my stuff tonight - and blam, Apple TV icon is not there. Nothing I do brings it back. Reset everything - turn it all off and on. Nada. This is really annoying.
-
DW CS3 Display problem in Firefox and Netscape
I have a page created using css. I have a div wrapper set at
100% for height and width and it has a background image. It
displays correctly in IE, but in Firefox and Netscape it has a
white bar along the top. I don't have this online yet, so I know it
is difficult without seeing it or seeing the css, but any ideas are
welcome. If there is something, aside from the site being online
that would help to identify the issue let me know. As always, I
appreciate any and all ideas.
Thank you.100% height isn't going to work, you know?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Nancy O" <[email protected]> wrote in message
news:gohub8$1ej$[email protected]..
> Use these on-line code validation checkers:
>
> HTML -
http://validator.w3.org/
> CSS -
http://jigsaw.w3.org/css-validator/
>
> I don't know how you are applying max-height or to what,
if any, benefit
> so
> I can't comment. But min/max height/width are not
recognized in pre-IE7
> browsers.
>
http://www.quirksmode.org/css/width.html
>
>
> --
> Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
> -
Problems about airplay and apple tv
Hello,
I currently have two terminals wifi ssid with two different "alexmario" and "numericable" and are on the same network.
when I activate "airplay" and my "Apple TV" is ethernet, I the "airplay" broadcast on one of my wi-fi "alexmario" on my iphone ios5.0.1 and then when I conecté on "numericable" airplay function is not available ...
how do I get the "aiplay" terminal on both networks?from this support article: Using AirPlay
With AirPlay, you can wirelessly stream videos, music, and photos from your iPhone, iPad, or iPod touch to Apple TV (2nd generation) and stream music to AirPlay speakers or receivers, including AirPort Express. You can also wirelessly stream videos and music from your computer to Apple TV (2nd generation) and stream music to AirPlay speakers or receivers, including AirPort Express.
you can not airplay from ATV2 to other devices.
Maybe you are looking for
-
Unable to ping device behind Cisco 3750 on the same inside VLAN via Cisco ASA 5505 Anyconnect VPN
Hi Guys, I've been stuck with this for the last 2 days, and I thought to try and use Cisco's forum, I setup my home DC, and started having problems once I moved a Cisco 5505 behind a Cisco 1841 router (I wanted to eventually test DMVPN live on the in
-
Can not open Preview site in brouser
Everything was fine, but now can not open a preview site in browser. I do not know what happened. The browser opens Preview site in brouser http://192.168.0.102:33333/Preview/sitename/index.html but nothing show, is infinite loading. Please help me
-
Exchange rate difference posting deactivate in MIRO
Hi Exchange rate difference posting is active, I do not want to post to this account, How to deactivate this. Shoudl i change in the config under invoice verification - How to treat exchange rate diff ? will it create any other problem ? Pl Suggest.
-
How to create Spatial index in SQL Developer Data Modeler 4
Hi, What is the procedure to create a Spatial index in SDDM v4 ? I ended up in a deadlock due to the following issues : 1) Reverse engineering missed the spatial index, so I need to add them manually. 2) Adding an index does not allow me to check the
-
Hi Gurus, I am doing the system copy of ABAP + Java running on Windows 2008 with SQL server 2008. During import at target system I am getting the below error at Post Load activities. *sapinst.log* E:\usr\sap\BPD\SYS\exe\uc\NTAMD64\dipgntab.exe -rwr4