Display/View of GL Account

Hi FI Gurus,
Can it be possible to view Text field in GL Account (FBL3N) with details of sub-modules customer / Vendor (FBL1N or FBL5N) so that it is possible to make analysis between GL and Customer/Vendor. Whether it is possible to bring details from MM or SD module or need some enhacement. Thanks in advance.
Regards,
Prakash

Hi,
If you are on ECC 6.0 there are some enhancement points available in the programs please check if you can use those to get customer vendor information in the report.
Thanks and regards
K.R

Similar Messages

IPad can find cellular connection settings no longer displays View Account Tab

yesterday iPad could not find cellular data connection...Settings under cellular data no longer displayed View Account tab. (Image below is from my older iPad to show what is missing on newer one with the issue.)
iPad then displayed notification that it could not connect to cellular data and said to restore iPad.
I tried to restore via cable to iTunes on home iMac. All attempts failed.
By the way I checked the AT&T Accout which is a grandfathered "unlimited" act that is current and up-to-date
Can anyone help?

I would take the SIM out and then reinsert it. Next I would restore from backup. Lastly I would restore to factory new to see if it works in that condition before you add things to the iPad.

Custom view in contract account screen

We added custom fields/view in contract account screen. The new section is confidential and can only be seen if there is proper authorizaion.
I was able to hide the fields in the new view/section but not the view/section itself. If the user has no proper authorization, all the fields are hidden but it still leaves a box with nothing in it.
Is there a way to hide this box or to only display the view/section according to certain conditions?

Hi Bluemountain,
I do not believe there is an option to hide the section / view completely through any of the configs. Since SAP is building that subscreen area based on config, it would not be possible to suppress it through code either.
Warm Regards,
Sumith

Cannot display view BP_HEAD/BPHEADOverview of UI Component BP_HEAD issue

Dear all, I am facing a strange issue in CRM 7.0 web-UI.
I have created an attribute set with attributes and was trying to assign this to an Individual account.
The moment I click on "Marketing Attributes" assignment block, I face the following error message:
Cannot display view BP_HEAD/BPHEADOverview of UI Component BP_HEAD
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Window 'BP_DATA/MarketingAttributesEOVPList' is not defined in the component 'BP_DATA'
Method: CL_BSP_WD_COMPONENT_USAGE=>GET_INTERFACE_VIEW_CONTR
Source Text Row: 28
Window MainWindow of UI Component BP_HEAD cannot be displayed
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BP_DATA.BP_DATA/MarketingAttributesEOVPList in component BP_HEAD could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
I tried with many different business roles but always faced the same problem.
Consequently, I had to logon using GUI, open tcode BP and assign the marketing attributes.
After that, when I try to login in web-UI, I face the same issue again.
Tried to search in Forums but couldn't get a relevant situation. So please suggest if you have any solution.

Hi Animesh,
Please check the runtime repository for the component bp_data. In the component Interface, add the window 'BP_DATA/MarketingAttributesEOVPList'. This should resolve your problem.
Regards,
Radhika

FICO - how to view the offset accounts while viewing ledgers

Hi Friends,
When I open a ledger to view, I need to display also the offset account .
Example. If the entry is Dr. Repairs and Cr. Vendor
If I go to the vendor account , in that particular line item , I should be able to see the offset account as Repairs .
Is this possible ?
Please help.
Regards,
Rajesh

Hi,
You cannot see the offsetting entry in a ledger instead you can see the details of corresponding.
FBL1N - Vendor Line Item Display
FBL3N - GL Account Line Item Display
FBL5N - Customer Line Item Display
Warm Regards,
Sivakumar Sathiyamoorthy

How to handle the button "cancel" in a dialog box for displaying views?

Hello!
I ve a question about handling the cancel button in a dialog box for displaying views.
I ve already implemented the dialog box by using the following code:
METHOD eh_onnewqact.
DATA stitle TYPE string.
IF m_popup IS BOUND.
    stitle = cl_bsp_runtime=>get_otr_text( alias = 'ZCC_ICRM/NEW_TASK' )."cl_wd_utilities=>get_otr_text_by_alias( 'ZCC_ICRM/NEW_TASK' ).
    m_popup = comp_controller->window_manager->create_popup(
      iv_interface_view_name = 'ZCC_POPUP_NEWBT/NewQActWindow'
      iv_usage_name = 'CUNewQAct'
      iv_title = stitle
    CALL METHOD m_popup->set_on_close_event
      EXPORTING
        iv_view       = me
        iv_event_name = 'NEWQACT_POPUP_CLOSED'.
ENDIF.
m_popup->open( ).
ENDMETHOD.
My dialog box consists two buttons - cancel and create.
The cancel buttons should close the popup and the create button should create an entity of a specified object. but let us come to the cancel button. I did´nt find any information about implementing an cancel button. So, how should I implement it? I thougt
me->close( ). But that didnt works!
Could u give me further information about that, because my cancel event-handler is empty?
method EH_ONCANCEL_QACT.
endmethod.
After that I would know how my calling view could know that the user pushes the Create Button and how the data of 2 inputfields of the dialog box finds their way to the calling view in order to process this data there?
Thank you very much!

Hi Michael,
thank you for your advice! This problem is solved...
...but I have another issue. Ive implemented 2 editable fields in my popup. The user should fill that fields with context and that context should be processed in the calling view of my popup.
My question is how to transfer these information from my popup to my calling view or method?
I tried the following...
      lv_context_node ?= m_popup->get_context_node( 'QUICKACT' ).
      IF lv_context_node IS NOT INITIAL.
        lv_text = lv_context_node->get_date( attribute_path = '' ).
      ENDIF.
But it doesnt work! The context node object is always empty/initial.
Thank you!
PS: Another possibility could be that the object / node of the calling view is transferred to the pop-up in order to process it there.
Edited by: Marcus Findeisen on Feb 22, 2011 12:13 PM

How to create individual view (like MRP,Accounting..)for existing material

Hi,
I have a scenario as below:
Suppose I created a Material using MM01 txn only entering data in 2 views i.e Basic data1 and Basic data2.
Now my workflow triggers. I have done this using 'Create' event of BUS1001006 Object type.
Now i need to send workitems to all those who are responsible to create rest views like MRP,Accounting,Work scheduling etc..Workitem will take them to MM01 txn with Material No. and user will select the view which he has authorization and will enter the relevent data and save.For this i have used 'CreateView' method of BOR BUS1001006 but its not working properly.
I hope you could understand the scenario.If need more clarity then please revert.
Can anybody tell the solution please.It will be very helpful to me.
Regards,
Madhu

I am passing the object also..but its not helping.
I think Parameter 'ViewListLine' of method 'CreateView' is not passing properly.
Can you please give any solution where to get this parameter value.
Regards,
Madhu
Edited by: Madhusmita Acharya on Mar 10, 2010 10:06 AM

Display view scrambles pages that display fine in browser

Help would really, really be appreciated.
I have a number of pages for a site (at
www.cognographics.com) which display perfectly in the browser.
Until recently, they also displayed perfectly in display view in
DW4. Then I replaced my PC (power surge zapped it), reinstalled
DW4, and now the same pages appear scrambled, with layers scattered
across the page, tables mixed up, etc.
Nothing changed in the code, and as I said, the pages display
fine in IE7. I know the code is not the cleanest, with some of the
styles in the CSS style sheet and others defined on the page, but
(a) the browser does not complain and (b) when I created the pages
in DW they looked fine.
I have installed DW4 on four different PCs, I've even tried
my pages in a friend's DW MX -- same result: Perfect preview in
browser, but pages are messed up in display view in DW.
I'm at my wits end -- any help would really, really be
appreciated
Thanks
Johan

> I downloaded several free templates
You got what you paid for, no?
> Now, how the ^!#!@#$ is this possible? And why would
these templates
> display
> fine in DW on my PC a few months ago, and now suddenly
they're screwed up?
It's entirely possible. Dreamweaver's Design view is not
nearly so
forgiving as a browser's rendering.
> I've tried an upgraded DW (MX);
Ahh right. The bad news is that DMX is just pretty awful at
rendering CSS
layouts. Unfortunately the only thing you can do about this
is to upgrade
to a more current version of DW. The Design view in DW CS4 is
perfect, for
what that's worth. This page contains all the elements that
will cause DMX
to fall down (floated containers, and absolute and relative
positioning).
Sorry about that. And since DW4 is the immediate predecessor
to DMX, it's
not going to do as well as DMX even.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"JohnPerth" <[email protected]> wrote in
message
news:[email protected]...
> Hi -- thanks for your comments -- much appreciated.
>
> I carefully checked the validation, but unfortunately
sorting out those
> problems didn't fix the problem.
>
> Here's the thing: I downloaded several free templates
from
>
http://www.freewebsitetemplates.com
-- including the template which I
> originally I used for my site (it's called
architecture).
>
> So, these templates have not been touched by me -- their
code is still
> 100%
> unmodified. But when I open them in Dreamweaver -- same
problem: they are
> entirely screwed up in Display view, but they render
just fine in the
> browser.
>
> Now, how the ^!#!@#$ is this possible? And why would
these templates
> display
> fine in DW on my PC a few months ago, and now suddenly
they're screwed up?
>
> You can see the magnitude of the problem. I've tried
files that have not
> been
> modified by me. I've tried an upgraded DW (MX); I've
tried both DW4 and DW
> MX
> on several different physical PCs; I've tried them on
both XP and Vista
> machines. Still the problem persists: In display view,
the pages are
> screwed
> up, while they render just fine in the browser.
>
> Where do I go from here?
>
>
>

GL master data - display translation in GL account list report

Hello all. I would like to produce a report that shows the Spanish translations we've assigned to GL accounts in the Translation section of master data. However, I can't see where I can define the language "ES" in any of the standard reports criteria. Any suggestions? Or do I have to log into SAP 4.7 with the language "ES" in order to see those translations?
Thanks!

Hi,
Try F.01.
Enter the chart of accounts, the comapny code. Select the FSV (use BABE, its like a trial) and input the language as ES. It should show you the text in Spanish.
If you just want to view the GL account and the Spanish description, you can view the table SKAT in transaction SE11 / SE16 and you will be able to see the text in the language of choice.
Cheers.

"Outlook cannot perform search. Cannot display view." error coming up when searching shared calenders in Outlook 2010.

Hi,
So I am having issues with the advanced find feature in Outlook 2010. When I goes to search a shared calender it gives me the "Outlook cannot perform search. Cannot display view." error. It is odd because it only does it with shared calenders
and only when a calender is selected. If I search my inbox it works fine. It also works fine when I first open Outlook and perform a search without selecting any calenders. If I select on it then gives me the error. I have tried resetting the views, I ran
cleanfinders and I went through this page (http://www.msoutlook.info/question/47) and rebuilt the index/scanned the pst/etc. Nothing seems to be working. I would appreciate some help if anyone knows why this would be happening.
Thank you for your time,
Gabe M.

Pst file size would not cause this and Outlook 2010 can have huge pst files as long as you use the new Unicode format.
If the problem is a corrupt view, cleanviews will clear it. I'm sure there are other causes besides corrupt views, but I can't think of any at the moment.
Does it work in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Editing Text in Dreamweaver Display View

I have just started using Dreamweaver CS4. In older versions
of Dreamweaver, I'm used to seeing text in Display view and being
able to edit the text directly in Display view, rather than having
to edit text in Code view. But when I'm trying to edit text in
Display view on a webpage that has text in a scrollable window,
Dreamweaver does not allow me to scroll down the scroll box, so I
can't edit text that is lower down in the scrollable area.
Anybody have an idea on how I can accomplish this?
Thanks very much.
Jason

That would be the way....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:go5tfn$r58$[email protected]..
> Double click in the scrollable area and see what
happens.
>
>
> jsaffer1 wrote:
>> I have just started using Dreamweaver CS4. In older
versions of
>> Dreamweaver, I'm used to seeing text in Display view
and being able to
>> edit the text directly in Display view, rather than
having to edit text
>> in Code view. But when I'm trying to edit text in
Display view on a
>> webpage that has text in a scrollable window,
Dreamweaver does not allow
>> me to scroll down the scroll box, so I can't edit
text that is lower down
>> in the scrollable area. Anybody have an idea on how
I can accomplish
>> this?
>>
>> Thanks very much.
>>
>> Jason
>>

Cannot display view MainWindow of UI Component BT111M_OPPT

Hi Experts
I have acceidently enhanced the std component & after that all the views have been deleted.
Now the issue i am facing is, whenever, i am trying to open the opportunity creation screen, i am getting an error saying
*Cannot display view MainWindow of UI Component BT111M_OPPT
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'CUBTPOPUPS'
Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
Source Text Row: 20
An exception occurred during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow in component BT111M_OPPT could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Saved Searches *
Is there anyway, the default / standard settings can be retained?
Thanks & Regards,

How did you delete the views? Have they been deleted from the enhancement or from rumtime repository?
Did you also try to delete your enhacement and see if it works fine?
There is a button in BSP_WD_CMPWB first screen, by clicking that you can show/hide the enhancement set field. Try to see by hiding the enhancement i.e. by navigating to the standard view that the configuration of run time repository is fine.
Regards
Prasenjit
Hi Prasenjit,
Thanks for continuous help. I havent deleted the standard views either from enhancement OR runtime repository. I selected the view & hit the enhancement button which is available on the screen, it gave some warning & i continued.
After compliation, i saw that the std views are missing & when i tried to open the opportunity creation screen i am getting the said error.
regards,

Where do I view my iTunes account balance?

Where do I view my iTunes account balance?

Nope... Nothing there! Why is it so hidden? I have been informed by iTunes that my balance is zero - unfortunately I cant confirm that for myself because I cant find my 'balance'. Interestingly, I have redeemed several gift cards over the months and purchased some songs and there was a credit after those transactions, but coming back later there were no funds...
As people would know, it is very difficult to completely use a $20, $30, etc. gift card when songs cost $2.49 or some other odd amount. I smell a rat... Why cant Apple just reinstate the old system when you logged into your iTunes account the credit was shown next to your login?! Even if it was zero it still showed. Another interesting issue is that you can view your purchases, but NOT your gift card redemptions...
I am still waiting for iTunes to come back to me after their initial 'helpful' response with an explanation on this matter and where my credits have gone to. I have requested an account statement of all my iTunes transactions for the last 12 months which also show my gift card redemptions. Let's see if they deliver?!
I will post when I get a response.

HT2589 how can i skip the viewing on my account when i has not use my apple id in i tunes stores?

How can i skip the viewing on my account when i has not use my apple id? The main problem is i do not have a credit card... so what should i do?

You can't, you will need to enter a credit card number before you can use that account in the store.
There are instructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534

Com.waveset.util.WavesetException: Missing view id; Missing Account ID

Hi,
I have some users in IDM provisioned to LDAP.
I am now trying to find users and delete them thru the end user interface.
When i enter the ID, and click search, i get this error
"com.waveset.util.WavesetException: Missing view id.
Missing Account ID"
Here is my WF:
<WFProcess name='Find WF' maxSteps='0'>
<Activity id='1' name='Start'>
<Transition to='Accept User ID'/>
<WorkflowEditor x='43' y='10'/>
</Activity>
<Activity id='2' name='Accept User ID'>
<ManualAction id='0' name='Enter User ID' timeout='60' syncExec='true'>
<Owner>
<ref>$(WF_CASE_OWNER)</ref>
</Owner>
<FormRef>
<ObjectRef type='UserForm' id='#ID#CB00E29B1B211E5E:5673384:1141A79B1FE:-7FF3' name='Enter User ID Form'/>
</FormRef>
</ManualAction>
<Transition to='getView'/>
<WorkflowEditor x='191' y='10'/>
</Activity>
<Activity id='3' name='getView'>
<Action id='0' name='getView' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getView'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='type' value='User'/>
<Argument name='subject' value='configurator'/>
<Argument name='authorize' value='true'/>
<Return from='view' to='user'/>
</Action>
<Transition to='Delete User'/>
<WorkflowEditor x='123' y='73'/>
</Activity>
<Activity id='4' name='Delete User'>
<Action id='0' name='Delete' process='TaskDefinition:Delete User'>
<Argument name='type' value='User'/>
<Argument name='accountId' value='$(accountId)'/>
</Action>
<Transition to='End'/>
</Activity>
<Activity id='5' name='End'>
<WorkflowEditor x='508' y='10'/>
</Activity>
Not sure what the mistake it. Can somebody point out pls?
Thanks,

cutepaddy
Thanks for ur reply. However, it was not of much help.
The problem now is that, i dont get the suspended case workitems error anymore but, the WF is not doing what it's suppoed to do, i.e., delete the users. The dump shows that all activities and actions are being executed correctly, however, the user still is not deleted. Here are my updated forms and WF
Form 1:
Configuration id='#ID#CB00E29B1B211E5E:5673384:1141A79B1FE:-7FF3' name='Accept User ID Form' lock='Configurator#1186027075593' creator='Configurator' createDate='1185855280921' lastModifier='Configurator' lastModDate='1186026775578' lastMod='354' wstype='UserForm'>
<Extension>
<Form name='Accept User ID Form' baseContext='variables' objectLocationID='objectName=Accept+Store+ID+Form&isBegin=true&objectPath=0&objectType=UserForm'>
<Display class='EditForm'>
<Property name='title' value='Find ID Form'/>
</Display>
<Field name='view.waveset.accountId'>
<Display class='Text'>
<Property name='title' value='Enter User ID'/>
<Property name='size'>
<Integer>20</Integer>
</Property>
<Property name='maxLength'>
<Integer>10</Integer>
</Property>
</Display>
<Validation>
<cond>
<not>
<invoke name='testUser' class='com.waveset.ui.FormUtil'>
<ref>:display.session</ref>
<ref>view.waveset.accountId</ref>
</invoke>
</not>
<s>Not Exist</s>
</cond>
</Validation>
</Field>
<Field name=':complete'>
<Default>
<s>true</s>
</Default>
</Field>
</Form>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='Accept User ID Form'/>
</Properties>
</Configuration>
Form 2:
<Configuration id='' name='Search Results Form' lock='Configurator#1186027075593' creator='Configurator' createDate='1185855280921' lastModifier='Configurator' lastModDate='1186026775578' lastMod='354' wstype='UserForm'>
<Extension>
<Form name='Seach Results Form' baseContext='variables' noDefaultButtons='true'>
<Display class='EditForm'/>
<Field name='MatchTable'>
<Display class='SimpleTable'>
<Property name='columns'>
<List>
<String>Title</String>
</List>
</Property>
</Display>
<FieldLoop for='accountId' in='view.waveset.accountId'>
<Field name='XYZ'>
<Display class='Checkbox'>
<Property name='Label' value='$(accountId)'/>
</Display>
</Field>
</FieldLoop>
<Field name='deleteuserbutton'>
<Field name=':complete'>
<Default>
<s>true</s>
</Default>
</Field>
<Field name=':formButton' button='true'>
<Display class='Button'>
<Property name='command' value='Save'/>
<Property name='value' value='Continue'/>
<Property name='label' value='Delete'/>
</Display>
</Field>
<Field name='formButton'>
<Expansion>
<ref>:formButton</ref>
</Expansion>
</Field>
</Field>
</Field>
</Form>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='Accept User ID Form'/>
</Properties>
</Configuration>
WF:
<TaskDefinition id='#ID#CB00E29B1B211E5E:5673384:1141A79B1FE:-7FDC' name='Find User WF' lock='Configurator#1186881293625' creator='Configurator' createDate='1185857988234' lastModifier='Configurator' lastModDate='1186880993625' lastMod='185' taskType='Workflow' executor='com.waveset.workflow.WorkflowExecutor' suspendable='true' syncControlAllowed='true' execMode='sync' execLimit='0' resultLimit='0' resultOption='delete' visibility='runschedule' progressInterval='0'>
<Extension>
<WFProcess name='Find User WF' maxSteps='0'>
<Activity id='0' name='Start'>
<Transition to='Accept User ID'/>
<WorkflowEditor x='99' y='47'/>
</Activity>
<Activity id='1' name='Accept User ID'>
<ManualAction id='0' name='Enter User ID' timeout='60' syncExec='true'>
<Owner>
<ref>$(WF_CASE_OWNER)</ref>
</Owner>
<FormRef>
<ObjectRef type='UserForm' id='#ID#CB00E29B1B211E5E:5673384:1141A79B1FE:-7FF3' name='Accept User ID Form'/>
</FormRef>
</ManualAction>
<Transition to='Display Results'/>
<WorkflowEditor x='183' y='45'/>
</Activity>
<Activity id='2' name='Display Results'>
<ManualAction id='0' name='Results' timeout='60' syncExec='true'>
<Owner>
<ref>$(WF_CASE_OWNER)</ref>
</Owner>
<FormRef>
<ObjectRef type='UserForm' id='#ID#CB00E29B1B211E5E:-435E4C45:114554237BF:-7F8B' name='Search Results Form'/>
</FormRef>
</ManualAction>
<Transition to='Delete User'/>
<WorkflowEditor x='266' y='99'/>
</Activity>
<Activity id='3' name='Delete User'>
<Action id='0' name='Delete' process='TaskDefinition:Delete User'>
<Argument name='type' value='User'/>
<Argument name='accountId' value='$(view.waveset.accountId)'/>
</Action>
<Action id='1'>
<expression>
<block name='dump2'>
<invoke name='dumpFile'>
<invoke name='getTask'>
<ref>WF_CONTEXT</ref>
</invoke>
<s>c:\dump.xml</s>
</invoke>
</block>
</expression>
</Action>
<Transition to='End'/>
<WorkflowEditor x='411' y='101'/>
</Activity>
<Activity id='4' name='End'>
<WorkflowEditor x='529' y='121'/>
</Activity>
</WFProcess>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='Find User WF'/>
</Properties>
</TaskDefinition>
Thanks in advance for ur help

Display/View of GL Account

Similar Messages

Maybe you are looking for