Display will not sleep any more after waking from sleep

My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
Any suggestions? Anyone else ever see this? Seeing it now?
Thanks!

This is still an issue for me.
I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
Sometimes a reboot fixes it, sometimes I have to reset the SMC.
Any info out there?

Similar Messages

  • MacBook Pro late 2013 does not show login window after waking from sleep

    MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
    This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
    Any ideas?
    Thanks
    marcus

    Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
    I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
    I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
    sudo pmset -a autopoweroff 0
    We'll see if it helps.
    It happens toughly a couple of times a week.

  • Not re-connecting automatically after waking from sleep

    Hello,
    I have recently purchased the TC 1Tb version. I have set this up to be automatic for both channels and all seems OK. However, after I wake up the Imac from sleep mode, the wireless does not automatically re-connect. I have to manually re-connect from the airport symbol in the menu bar. I have an a normal AE before this, and I did not have this issue.

    Hello Diane:
    Welcome to Apple discussions.
    Try clicking the mouse if it does not automatically pair.
    I would also delete the preference file (com.apple.bluetooth.plist) and restart.
    Barry

  • Display will not come back up after waking up Pro

    Several weeks ago I increased the Pro's memory from 2 to 4GB. Since that time when I wake up the Mac, the display, (Westinghouse) will be all white. I then must turn it off and back on after that it looks OK. The increased memory might not have anything to do with the problem.

    The obvious question is, if you go back to the original 2 GB configuration, does the problem go away?

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this?

    On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this? Thanks --

    Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

  • Itunes will not open any more.

    itunes will not open any more. re-install and un-install are both unsuccessful (error code 2324). Windows 8.1

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • You sent me a notice letting me know that adobe forms central will not continue any more. What tool will replace it? How can I continue creating forms? Thanks for your responses.

    You sent me a notice letting me know that adobe forms central will not continue any more. What tool will replace it? How can I continue creating forms? Thanks for your responses.

    Hello Chalo,
    There are many FormsCentral alternatives. Our solution, JotForm, has the most complete Import Wizard both for your forms and for your response database.
    http://www.jotform.com/formscentral/

  • Since two days my MSN messenger service will not launch any more

    Since two days my MSN messenger service will not launch any more saying that I am either not connected to the internet or that the service is unavailable. Neither is the case as I can access my hotmail directly via the web. What can be causing this all of a sudden and how to rectify it? What am I missing.

    Sounds like you need a hardware repair. Contact Apple using expresslane.apple.com if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

  • I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be

    I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.

    Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?

  • Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface

    I'm having a problem I cannot seem to get around without force quitting Logic every time.  If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
    My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
    For the SSL controller, Logic automatically sets it up like this:
    Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
    After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere.  Clicking anywhere on the gui results in white flashes and nothing else.  doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting.  For an example, here's a pic of the file menu at this point:
    I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening.  However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
    Here is the setup screen of the MCU Pro:
    And here is the dialog for the missing ports after waking from sleep:
    This dialog is completely different than the other control surface's missing ports dialog.  When clicking on "Keep unassigned" here, Logic resumes working fine.
    The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
    I'm using a Mac Mini (late 2012)
    Processor  2,6 GHz Intel Core i7
    Memory  16 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000
    Software  OS X 10.9.4 (13E28)
    with Logic Pro X 10.0.7
    Any help would be greatly appreciated!!

    Did you ever figure out a solution to this problem?
    I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem.

  • Odd Keyboard/mouse failure after waking from sleep

    Here's an odd problem that's been bugging me for awhile now.
    Occasionally my iMac will not allow me to log in after waking from sleep. I always log out of the machine when I'm not using it, and after a bit it goes to sleep (usually I'll just click the "sleep" button on the login display).
    It wakes up with a wiggle of the mouse (Wacom Graphire), a tap of the keyboard (recent wired but numeric-keypadless Apple) or if I hit the button on my Griffin Power Mate.
    But then I cannot do anything. If I click any of the edit boxes in the login window, or any of the buttons, the mouse jumps to the "sleep" button but does not click it. I can't enter a username or password because those edit boxes never get focus.
    The machine is otherwise alive, as I can ssh to it from another computer or my iPhone and then from the command-line do a
    $ sudo /sbin/shutdown -r now
    for an orderly reboot.
    Very bizarre and rather annoying ... this has persisted since I installed Snow Leopard. Clues, anyone?

    Some, but not all of the time that the tower goes to sleep, when it wakes up the mouse works, but the keyboard does not. A restart solves the problem, but that's not practical.
    My aluminum keyboard did exactly the same thing when used with the USB extension cable, but not when plugged directly to the computer. Usually, unplugging the keyboard for a few seconds would fix it. The Apple store replaced the keyboard, and I have had no problems with the new keyboard.

  • Macbook Pro restart after waking from sleep

    Hi all,
    Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
    I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
    Thanks!

    Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
    https://discussions.apple.com/message/19675376#19675376

  • SMB shares die after waking from sleep mode

    When my Macbook is freshly booted, I can access the SMB shares on my linux server just fine. The fun starts when the computer is put to sleep and then awakened. About 50% of the time, the shares on my server are inaccessible after waking from sleep. When I click on the server in the Finder, it just says it's connecting and sits there. Not only are the shares inaccessible, but the server cannot be "ejected" (Item in use). Plus, the system cannot be rebooted nicely. It just hangs with the spinning wheel until I ctrlcommandreset the thing. Other services on the server remain accessible from the Macbook after samba dies (iTunes library, FTP). Occasionally, the shares will come to life if I sleep/wake the computer again, but that is rare.
    Tiger worked fine with the same server, it wasn't until the 10.5 upgrade that I began having trouble. I called Apple tech support about the issue, and waited 2 weeks for them to tell me to "install Bonjour on the server." I have formatted and reinstalled Leopard more times than I care to count, but the problem always remains. I've been dealing with this for almost a YEAR now and am totally desperate for a solution. Has anybody ever heard of this before?? The server is running Clarkconnect (Centos derivative).

    Hi Gary,
    This behavior is not a Safari issue but system related.
    Close all applications an run in utilities> disc repair permissions.
    After you done reboot an see what happens when your Mac gets to sleep mode again. This time don't open any applications to test it. Just leave it showing your desktop.
    Post back with the results ...
    Dimaxum

  • External Hard Drive Fail After Waking from Sleep

    Hi,
    I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
    I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
    Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!

    Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK.  I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
    I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Maybe you are looking for