Displaying a mix of L to R and R to L readable strings in a single text box

Folks,
Is it possible to get accurate display of fields when English string values and hebrew characters are dragged into a single text box for viewing.
Currently while doing this the display gets erratic as some of the english strings gets displayed in the middle of a hebrew word.
the whole text box data needs to be read as R to L , with the exceptions of a few English string DB values.
Is this achievable ? Thanks for your help.
-Jayakrishnan

Thanks for your reply Jamie.
I am not sure whether I made my requirement really clear.
I have these formula which display words in multiple languages, say english , hebrew , korean etc. The data value for this formula will be supplied by the framework externally at run time depending on which language has been selected.
Now for this scenario I got to display 50 + objects in a concatenated fashion containing the combination of above said formula ( Labels ) and their DB values.
For hebrew language the text growth should be R to L even if it would containg DB fields which may be integers or strings.
The logic you have mentioned in the txt file, I have not understood why we need to reverse the string as I am assuming the characters would be laid out correctly.
The missing part is when the string grows to the next line the printing should start from the Right and not from the Left.
Hope this would be a little more clear. Appreciate your time.
-Jayakrishnan

Similar Messages

In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height

Want to display the both hindi and english font in single text object

hi...
my problem is i want to display both Hindi and English font together in a single text object...
the data is retrieved from Database in detail section...
is there any font which supports both Hindi and English font for single text object...
help me...

hi,
Is your single Text object contains combination of two strings?
for example:
{State}{City}
If yes,
Right Click the 1st string object within the Text box and 'Text Formatting' specify the Hindi Font
Right Click the 2nd string object within the Text box and 'Text Formatting' specify the English Font.
Regards,
Vamsee

I want to display strings which are in case structure ,into one text box

hi,
i am writing a vi, which has event structure inside that a
case structure.
i problem is , i have two cases,
1) when the value is true it executes the true case, first it reads the string constant and second is the string indicator which is my out put.
2) in the false case it does pritty much same.
i want to display the inputs and out puts of different cases into the same text box that is one for input and one for output.
Can some one help me.
Solved!
Go to Solution.

Did u tried as Ravans suggested.
Put the indicators outside of the case structures. Wire across the borders of the case structure. It creates "tunnels".
I am not getting
but it displays both result at a time. but i want
to display the instruction first, to the user, so that they act
according to the instruction and ,than i want to display the result.
Try this VI.
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
string display-1.vi ‏22 KB

I just did the photoshop camera raw update and now everytime I try to do a text box or change the text the whole program crashes.

I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.

All fixed!!! My Aperture wasn't being recognized because it was in a folder. OK, now I can use my camera with Aperture.

Link text boxes and duplicate contents?

I'm working on a template for business cards in CS4 and was wondering if it was possible to link text boxes together in a way so that when information is entered/changed in one it would do the same in all the others. There are 8 business cards on one sheet. If I could link the text boxes containing the Name/Position and change the information on the top left card it would then automatically change on the other 7 cards. Does anyone know if this is possible?

Export it as an InCopy story and then place that multiple times.
Bob

3 Questions- Two about text boxes and one about something else! (10 Points)

Hi, I'm doing a large project in java and have ran into several issues. These are summed up in these three questions:
1. How would I make certain words certain colours/formats? I have been told I should a JTextPane, but all my text is currently in a box created like this:
static JTextComponent textbox = new JTextArea("", 23, 60);
2. How would I give that above box (or the JTextPane if I used that) line numbers next to each line. Not part of the text box, but on the left hand side numbers go down every line, however (and here's the catch) when you scroll the text box, the line numbers have to scroll also, so they stay in touch with the lines.
3. How would I launch an external application? At the start its just an .exe, however I have to load it with certain parameters? any ideas?
Thank you
Alex

1. How would I make certain words certain
colours/formats? I have been told I should a
JTextPane, but all my text is currently in a box
created like this:Then you have a problem. You need something that can handle a StyledDocument
2. How would I give that above box (or the JTextPane
if I used that) line numbers next to each line. Not
part of the text box, but on the left hand side
numbers go down every line, however (and here's the
catch) when you scroll the text box, the line numbers
have to scroll also, so they stay in touch with the
lines.http://www.developer.com/java/other/article.php/3318421
3. How would I launch an external application? At the
start its just an .exe, however I have to load it
with certain parameters? any ideas?http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

How can I have a button that will show/hide a text box and images on the same page?

I have a page like below:
I want to make so that those 3 buttons show different text under them when they are each pressed. How can I achieve this?
Thanks.

Hello,
Please try using Tooltip Composition Widget to achieve that..
You need to customize the trigger as the button and you can use the target to insert desired text box or images.
you can find this in Widgets library panel > composition
Please let me know in case you need any other clarification on that.
Regards
Vivek

Single text and date/time line still stays?

i think ios 8 update did this
with IOS 7 you were able to delete a single text message within a message string and the date and time stamp of the message string was reset back to the last message in the string. In IOS 8 even if you delete a single text message is still tracks the date/time when the last message was received/sent even after it's been deleted. I don't want to delete the whole string just a single text message and have it look like it never appeared. But with it still storing the date/time stamp it's sorted in messages like something was there. Anyone know if I can fix this??

i think ios 8 update did this
with IOS 7 you were able to delete a single text message within a message string and the date and time stamp of the message string was reset back to the last message in the string. In IOS 8 even if you delete a single text message is still tracks the date/time when the last message was received/sent even after it's been deleted. I don't want to delete the whole string just a single text message and have it look like it never appeared. But with it still storing the date/time stamp it's sorted in messages like something was there. Anyone know if I can fix this??

Find and Replace Text box

I have a document with roughly 50 pages. At the bottom of each page is a text box about with my address going across. I moved so I need to update the address, only problem is the address is longer so after using find and replace I would have to go to each text box and re-size. IS there a way to replace them all with new one or is there some way to add footer and I have been doing it wrong all along?
Thanks for your time and help.

This is what master pages are for.
Bob

HT4061 Help! My iphone displays a cord to an itunes icon and I can't get it to go away...even when I plug it into my computer. My computer is not recognizing it as a device.

Help! My iPhone 4 displays a cord to an itunes icon and I can't get it to go away...even when plugged into my computer. My computer doesn't recognize it as a device. How can I just cancel all this and get my phone back to normal?

You might want to try performing a hard reset of your device; this will restart it and generally clear out any errors, it will not erase any data on your device.
Press and hold both the home button and the lock button (the button on the top right of the iPhone) for several seconds until the Apple logo appears.

The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??

The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism

Fetching data from a table and displaying it on the text box

Hi,
I have created a dialog program in which created a container(text box) to enter data upto 1000 characters.
Iam capturing the data and storing it in a custom table. In PBO I want to fetch data from my custom table (if data is already present :1000 characters data) and display it on screen.
Please let me know how do i do it?

hii Pavani,
declare this two sttements in Screen
MODULE STATUS_DATA.
MODULE SELECT_DATA.
In PBO, Under SELECT_DATA write Select query like:
(considering the DB field to be text and Screen Field to be SC_TEXT)
select text from <DB Table> into SC_TEXT where <condition>.
*note if u r selecting more than one field than write fields in ( ),eg. (f1....f2) )
Plz let me know for any further queries.
Regards,
Apoorv

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Displaying a mix of L to R and R to L readable strings in a single text box

Similar Messages

Maybe you are looking for