Displaying pdf in browser when using Windows 7 Beta & AR 9

Early indications are that "Adobe Air" and/or "Acrobat.com" are breaking the display in browser function in Windows 7 Beta when using Adobe Reader 9.
On a fresh install of Windows 7 Beta, I installed Adobe Reader 9, and as everyone is finding out, you cannot display a pdf in a browser window. Doesn't matter which browser either. IE8, Opera 10a, Mozilla SeaMonkey 1.1.14 had the same result for me. The only workable option was to have the pdf open in a separate window of Adobe Reader itself. Oddly though, on rare occasions I could get a pdf to display in a browser window, but 95% of the time it would not work.
On another fresh install of Windows 7 Beta, I installed Adobe Reader 9. After installation I opened Adobe Reader and accepted the license agreement, then closed Adobe Reader. Next I uninstalled "Acrobat.com", then uninstalled "Adobe Air" using Programs and Features in Control Panel. So far, I have not had any problem downloading and viewing pdf's in a browser window. Tested with IE8 and Opera 10a. Note that I did not run compatibility mode on Adobe Reader.

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Similar Messages

Trouble Setting "Display PDF in browser using" by MCX

I want to force the PDF viewer in Safari to Mac OS X v10.6 built-in Preview Application instead of Adobe Acrobat Pro (9.4.0).
I found that unchecking "Display PDF in browser using:" in Acrobat's Preferences, sets the viewer in Safari to Preview. It seems unchecking this box modifies ~/Library/Preferences/com.adobe.Acrobat.Pro_x86_9.0.plist. by creating the entry root => Originals (dictionary) => BrowserIntegration (array) => item 0 as number with value 0, item 1 as boolean with value 0.
With that in mind I tried creating a MCX setting in my OD to apply root => Originals (dictionary) => BrowserIntegration (array) => item 0 as number with value 0, item 1 as boolean with value 0. Witch resulted in a grayed out, but checked settings for "Display PDF in browser using:"
I was wondering if any one has successfully figured out how to set this setting?

Hi,
Firstly during the installation of Reader X, there is an option of Customize Install. You can uncheck the Safari browser plugin from there. But this was possible before install. Now since you have installed in default mode (with above option checked during install) the method to disable plugin is as follows:
To disable the plugin-
1. Go to Library > Internet Plug-Ins
2. You will see AdobePDFViewer.plugin in the list of plugins
3. Create a new folder called Disabled Plug-Ins
4. Move the AdobePDFViewer plugin into the Disabled Plug-Ins folder
5. Restart Safari
In future if you want to re-enable this then you can put this plugin back to its original location or Reinstall Reader X (if you have permanently deleted the plug-in from your system). Reinstallation works as installing in repair mode.
AcrobatX/ReaderX uses MANAGED installation method on Mac(as compared to MANUAL installation method used in earlier versions). In case of manual installation method installation and repair was dependent on "Self heal" mechanism that required the admin privileges each time it was invoked. This raised a bit of concern so to remove this Adobe now uses Managed installation method and discontinued Self Heal mechanism.
You can check out this link for more information or if you want to track this discussion -
http://acrobatusers.com/forum/deployment-installation/acrobat-x-installation-installed-saf ari-plugin-without-asking
Thanks,
Karan

Can't uncheck 'display PDF in browser using' on mac

Reader 10.0.0
'display PDF in browser using' in the Internet preferences is stuck on to Adobe Reader. The checkbox is checked/disabled, and cannot be unchecked.
Also, viewing a PDF in the browser via FTP sticks the entire browser (hence my reason for noticing/disabling this plugin)
Had to remove the plugin file from file:///Library/Internet%20Plug-Ins/ to remove.

Hi,
Firstly during the installation of Reader X, there is an option of Customize Install. You can uncheck the Safari browser plugin from there. But this was possible before install. Now since you have installed in default mode (with above option checked during install) the method to disable plugin is as follows:
To disable the plugin-
1. Go to Library > Internet Plug-Ins
2. You will see AdobePDFViewer.plugin in the list of plugins
3. Create a new folder called Disabled Plug-Ins
4. Move the AdobePDFViewer plugin into the Disabled Plug-Ins folder
5. Restart Safari
In future if you want to re-enable this then you can put this plugin back to its original location or Reinstall Reader X (if you have permanently deleted the plug-in from your system). Reinstallation works as installing in repair mode.
AcrobatX/ReaderX uses MANAGED installation method on Mac(as compared to MANUAL installation method used in earlier versions). In case of manual installation method installation and repair was dependent on "Self heal" mechanism that required the admin privileges each time it was invoked. This raised a bit of concern so to remove this Adobe now uses Managed installation method and discontinued Self Heal mechanism.
You can check out this link for more information or if you want to track this discussion -
http://acrobatusers.com/forum/deployment-installation/acrobat-x-installation-installed-saf ari-plugin-without-asking
Thanks,
Karan

Display PDF in Browser Option

I am able to open a PDF file from a particular protected Website. I can fill in the required info, but when I attempt to Save/File it back to the site, the following pops up: "For security reasons your return could not be saved. Please ensure that the 'Display PDF in Browser' option is selected under the Edit-Preferences-Internet Settings in Adobe Reader."
Adobe Reader XI, Internet Explorer 10 & Windows 7 are loaded on my PC.
I cannot trace 'Display PDF in Browser' under settings, but using Tools>Manage Add-ons>Toolbars and Extensions>Show>All Add-ons, I can see that 'Open PDFs in the Browser' is Enabled.
I also used the Registry Editor: Adobe>Reader>exe to confirm the Name, Type & Data in the string value: (ab), REG_SZ, C:\Program Files\(x86)\Adobe\Reader11.0\Reader\AcroRd32.exe
No help is forthcoming from the Website, despite me logging a call to their service centre
Does the problem lie at my end, or the Website?

Hi Ben,
I manually added the registry setting but it made no difference.
I uninstalled 10.1.4 and reinstalled 10.1.3 and with 10.1.3 I am able to view a PDF in IE when launched from the command line.
I re-downloaded and reinstalled 10.1.4 and retried and now I can view a PDF in IE when launched from the command line.
Strange.
Regards
Craig

Issues with Display PDF in Browser option

We've recently hit a problem with our application that used to successfully display PDFs in a web browser control. In Adobe Reader 9.x it worked no problem. In Adobe Reader 10.1.3, it stopped working. I'm working along the line that it is something to do with the interaction between the ActiveX viewer and Internet Explorer when in a Citrix environment. (IE is version 8, OS is Windows 2003 Server). To help determine it was the Citrix element that was the cause, with the 'Display PDF in Browser' option active and using Adobe Reader 10.1.3 I launched IE from a command window passing the pdf file name as an argument and the PDF was successfully displayed in the IE browser. Now Adobe Reader 10.1.4 the latter is no longer working; the PDF is always displayed in the Adober viewer.
Has Display PDF in Browser been effectively disabled in 10.1.4?
If it should work as before, what can I do to restore the situation?
TIA
Craig

Hi Ben,
I manually added the registry setting but it made no difference.
I uninstalled 10.1.4 and reinstalled 10.1.3 and with 10.1.3 I am able to view a PDF in IE when launched from the command line.
I re-downloaded and reinstalled 10.1.4 and retried and now I can view a PDF in IE when launched from the command line.
Strange.
Regards
Craig

Adobe Reader X - Disable "Display PDF in Browser" via Registry

I'm trying to configure my organization's Windows workstations so that web-based PDF files open in Adobe Reader rather than in internet browsers. I have been able to configure Adobe Reader 9 installations to open web-based PDF files in Reader rather than internet browsers by using the following registry setting:
Hive
HKEY_CURRENT_USER
Key path
Software\Adobe\Acrobat Reader\9.0\Originals
Value name
bBrowserIntegration
Value type
REG_DWORD
Value data
0x0 (0)
My problem lies with Adobe Reader X: I used the following settings in attempting to prevent Adobe Reader X installations from opening web-based PDFs in internet browsers:
Hive
HKEY_CURRENT_USER
Key path
Software\Adobe\Acrobat Reader\10.0\Originals
Value name
bBrowserIntegration
Value type
REG_DWORD
Value data
0x0 (0)
Hive
HKEY_CURRENT_USER
Key path
Software\Adobe\Acrobat Reader\10.0\Originals
Value name
bAllowByteRangeRequests
Value type
REG_DWORD
Value data
0x0 (0)
Hive
HKEY_CURRENT_USER
Key path
Software\Adobe\Acrobat Reader\10.0\AVGeneral
Value name
bBrowserDisplayInReadMode
Value type
REG_DWORD
Value data
0x0 (0)
I've only had partial success, though. Internet Explorer respects the registry settings and opens web-based PDFs in Reader X. Firefox 14.0.1, though, ignores the registry settings and opens web-based PDFs in Firefox.
Is there a different registry setting I should be using so that Firefox sees "Display PDF in Browser" unchecked and allows web-based PDFs to be opened in Reader X? Is there another method I should be following for deploying this setting to Adobe Reader X clients?

Hi,
We'll, you've educated yourself well. Unfortunately, Acrobat products can't control what browsers do so uniform behavior is not possible. The setting is Adobe's best attempt and forcing some consistency.
The ReadMode setting only controls what happens in the UI after the PDF is open.
Ben

Display PDF in Browser(Embed PDF In IE 6)

Hi All,
I am Stuck in solving the below problem.
I am trying to dispaly the PDF in IE Browser 6, but i am getting the below error. Strange thing the same is working in IE 8.
"adobe Reader couldnot open 'A9R6B.tmp' becuase it is ither not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decode)."
System Details:
1. Windows XP
2. Adobe Reader 9
3. Using Weblogic Applicaiton server
4. Internet Explorer 6
Note:
1) I trying checking "Display PDF in browser" opiton in Adobe Reader ->Perferences -> Internet-> ---- But it did not work
2) I trying uncecking "Display PDF" in browser option in Adobe Reader ->Perferences -> Internet-> its worked but not embeded into the IE. It has opened seperatelly.
kindly help me by providied some clue to slove the above problem.
Thanks in advance
SIMHA

What is your operating system? Browser? Reader version?

I enable Display PDF in browser but still opens in Reader

Our current client PC's are Windows XP 32-bit, IE 7, using Adobe X v.10.1.2. We have an application that opens PDF files. We have the parameter "Display PDF in browser" enabled and it opens in the browser as it should.
However, new PC's are built with Windows 7 63-bit, IE 8, using Adobe X v.10.1.2. Using the same application with the parameter "Display PDF in browser" enabled, it always asks if you want to open in Reader or save the file. That shouldn't happen. It does this whether the paramter is enabled or disabled, it also does this using 32bit IE 8 or 64bit.
Is this a Adobe bug, Win 7 bug, or how can we make it open in the browser? Using another browser is not an option. IE is the company standard.
Thanks

Does it work correctly on "normal" web pages, e.g. the PDF links near the bottom of http://forums.adobe.com/community/adobe_reader_forums ?
In a 32-bit browser, the PDFs should open inside the browser.
With a 64-bit browser, the PDFs will open in an external Adobe Reader window.

Open PDF Slow Problem and Edit Registry to Disable "Display PDF in Browser"

There is around 400 users who were installed Acrobat Reader 9. But it is found that they open our intranet pdf very slow due to NETBIOS problem. The alternative solution is to disable the browser integration feature.
But how can I set Group Policy or Windows Registry to disable the "Display PDF in browser" feature for all the users?

If your users use Internet explorer, you can disable the add-on. to disable the add-on you will need to know the version of IE they are using. the most commonly used scripts to do that are kixstart or .VBS scripts.
e-mail me if you need any help with the script

Todays update to 7.1.0 broke "Display PDF in browser"

I do ***NOT*** want PDFs displayed in my browser.
I ***DO*** want PDFs displayed in a separate Acrobat window.
Version 7.0.9 was working this way until the update to 7.1.0 went in today.
Now, regardless of the of the setting of the Edit --> Preferences --> Internet --> Web Browser Options --> "Display PDF in browser" checkbox, all PDFs ARE being displayed in the browser window.
How do I disable this behavior or uninstall this last update?

I have managed to fix my problem with PDFs only opening in the browser. I went to MSIE(v7) Menu --> Tools --> Manage Add-Ons --> Enable or Disable Add-Ons... --> Add-ons that have been used by Internet Explorer --> [find/highlight the line with file = AcroIEHelper.dll] --> Disable --> OK --> Restart the browser (and maybe the PC).
As for 7.1.0 not being a real update, that is wrong. It is real.
Read about it here:
http://www.adobe.com/support/security/bulletins/apsb08-13.html
It says:
"Adobe recommends users of Acrobat 8 and Adobe Reader install the 8.1.2 update and users of Acrobat 7 install the 7.1.0 update to protect themselves from potential vulnerabilities. This is an update to resolve the issues previously reported in Security Advisory APSA08-01."

Adobe Reader XI enterprise deploy-disable display PDF in browser?

There appears to be conflicting information about Adobe Reader XI and how to pre-configure the "disable display pdf in browser".
The Enterprise Administration Kit/Guide says you can do this via the MSI Property:
DISABLE_BROWSER_INTEGRATION = YES
However, acrobat help, indicates you can ONLY do this manually via individual browser add-ons.
I have the redestributable version from Adobe and I used the Enterprise Guide to make the AIP and used the Customization Wizard to create the package and am using the properties line when the msi is installed to disable the display
so which one is right?

I am out of the office until 1/22/13.
If you need assistance with technical issues, please contact the Help Desk at: 518-402-8888
>>> Test Screen Name <[email protected]> 01/17/13 10:30 >>>
Test Screen Name http://forums.adobe.com/people/Test+Screen+Name created the discussion
"Re: Adobe Reader XI enterprise deploy-disable display PDF in browser?"
To view the discussion, visit: http://forums.adobe.com/message/5001441#5001441

Adobe Reader X - Display PDF in Browser Option is Greyed out

Looking for a registry fix to unlock the Display PDF in Browser option. Not sure how it is greyed out to begin with. My MST file was not set to Lock anything. Please help. I cannot find anything anywhere of use to "ungrey" this option.
It seems to happen when Acrobat is installed.
How can I fix and how can I prevent in future releases??
Matt

http://helpx.adobe.com/acrobat/kb/pdf-ownership-reader-x-installed.html

Reader X " display PDF in browser" is checked but greyed out

Hello
I have a user who wanted to print double sided by default when opening a PDF on a web page. I found that by downloading the PDF, not printing from a browser, the user can print double- sided. But when I go in preferences the option to uncheck " display PDF in Browser" is greyed out? I'm tried running reader as admin, logging out and logging in as admin, restarting the PC, running all updates. I was going to edit the registry next but wanted to see if anyone had been having this problem? THee is no Acrobat on this Dell laptop, only Reader X. It is a Windows 7 PC, fairly new. Any help would be appreciated.

Please update to the latest version of Adobe Reader i.e. 10.1.2 and enable the double sided printing as in the below figure:
Hope this helps.
Ankit

How to disable 'Enable JavaScript' and 'Display PDF in browser' in Adobe Reader 9.1 msi?

I'd like to how to disable 'Enable JavaScript' and 'Display PDF in browser' in Adobe Reader 9.1 msi.
Any help would be appreciated.

NeoChang:
You can modify the installation package using the Adobe Customization Wizard to toggle the "Display PDF in Browser" but I have not found a setting to disable JavaScript from the Wizard. I have created a script which makes the changes, but it has to be run for every user since that info is stored in the User hive of the Windows registry.
Disable JavaScript:
REG ADD "HKCU\SOFTWARE\Adobe\Acrobat Reader\9.0\JSPrefs" /v bEnableJS /d 0 /t REG_DWORD /f
Disable Browser Integration:
REG ADD "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /v bBrowserIntegration /d 0 /t REG_DWORD /f
Michael
~Simplicity of Character is a Natural Result of Profound Thought~

Acrobat 9 "Display PDF in Browser" on IE7 crashes the browser

Hi,
Here's what is happening. My company purchased a few licenses for Adobe Acrobat Professional 9, and they were installed on some of the company laptops. These laptops are in a UAC controlled SOE environment, so the employees are restricted to do any updates/installations that requires rights. The Adobe Professional 9 was installed through SCCM advertisement, and the "Display PDF in Browser" option was enabled.We discovered that when we attempt to download any pdf files off the web, the browser would stop responding/hangs during the duration of the downloads (shown at the status bar of IE), and we can only kill off the process.
The current workaround is to disable the "Display PDF in Browser" and download the file directly. However, it came to some points where the pdf documents contains some dynamic links over https on the site is is residing. In which case, the pdf have to be open to view from the secured site for the dynamic link to works.
Previously with Adobe Reader 9, we face no such issue. Only after we installed Acrobat Professional 9, this issue surfaces.
We have tried uninstalling the Reader before installing the Acrobat to prevent any chances of conflicts, problem persisted.
Here are the versions of the software involved.
Adobe Reader v9.3
Adobe Acrobat Professional v9.0.0
Internet Explorer v7.0.6002.18005
I have looked through the forums for similar cases, unless I have missed the keywords, I do not see any similar cases.
Has anyone encountered similar issues? Would appreciate if you could share on what was done to circumvent this. Thank you!
Jiang.

Hi broger_1,
Thanks for your reply.
In regards to your query:
Is the problem seen with both Reader and Acrobat?
No, this is only seen when Acrobat is install. It is working fine when only Reader is installed.
What is your definition of a dynamic link? Post example.
At the moment, I cannot find a online example for reference. I will try to describe by example.
Let's say if I goes to https://nonexistance_site.com/brochure_ folder/broc_1.pdf, and the "Display PDF in Browser" was already enabled.
The content of the broc_1.pdf contains a hyperlink that points to "../broc_2.html"
Our issue now is the we can only download the pdf file to a folder, say c:/pdfs/broc_1.pdf, so when we tried to access the dynamic link, it will tries to locate c:/pdfs/broc_2.html, which is non-existence. And direct access to https://nonexistance_site.com/brochure_ folder/broc_2.html would not work for some reason (possibily session restriction, or something else).
What are your security settings? (is Enhanced Security enabled?)
This setting is currently disabled in the Acrobat Pro 9 preference. Should this stays as disabled?
This only happens when attempting to "download & display" any pdf files from the net, displaying of local pdf that is already downloaded is fine.

Displaying pdf in browser when using Windows 7 Beta & AR 9

Similar Messages

Maybe you are looking for