Displying wrong data after entering estimated cost while creating travel request.

Hi Team,
We are facing an issue while creating travel request from portal.
When we are entering estimated cost and after clicking on save and send button we are getting data is saved as correct.But after clicking on display form button the data is showing as different.
But after clicking on display form it is showing as 298900(adding two zeros at end for every cost).
Please help on this.
Thanks & Regards,
Kumar.

Hi Shankar,
Thanks For the reply. Can you please let me know what settings need to be there in SU3. This issue is effecting for all the users belongs to that country. Can you please suggest me!!
Thanks in advance.
BR,
Kumar.

Similar Messages

  • Error while creating Travel request

    Dear All,
    ESS 2005/SP6
        While creating travel request in I am getting following error
    "Errors have been discovered when checking the Expense Report. Please correct them in order to proceed."
    Regards,
    Kamal Rawal

    Hello Kamal
    Did you manage to resolve the issue in relation to "Errors have been discovered when checking the Expense Report."?
    Best Regards
    Roger Earle
    [email protected]

  • Error while Creating Travel Request ..thru TRIP

    Dear all,
    As I am suppose to creat a travel request thru TRIP but i am geting the below error and the msg no..............
    Error: Trip country IN / trip region do not exist in the system (T702O)
    Message no. PTRA_WEB_INTERFACE031
    As Mr. Paulo Vitoriano suggested me to Define Trip Areas, etc......... but my Trip Areas has already been defined and i have checked it also .... but still the error is same ....... so frnds pls tell me wat else may be the problem....
    I read thred Error while Creating Travel Request ..thru TRIP which is posted by prasanth but what they suggested i maitained already but still i am facing same problem could you pls suggest me where i missed.
    Waiting for Reply.
    Regards,
    Nagaraju

    Hi,
    Please check the following:
    1. Just check have you assigned country India to the trip provision variant you have created.
    2. Just check whether you have assigned the trip provision variant correctly to the respective country.
    Regards,
    S.Srikanth

  • TRIP END DATE greyed out while creating Travel Request IN SAP ESS Portal

    Dear Friends,
                               I am trying to create a Travel Request from my ESS Portal,when I am entering the trip details as follows:
    General Trip Data  (header)
    Start: *    (Have to enter trip date)
    End:        (greyed out)   **** problem with this field
    First Destination:  Country/Region:     open field
    Reason for Trip:    open field
    Activity:     open field
    Estimated Cost:
    Previous Step  Review     Exit  (these are all tabs)
    The problem is that the END DATE is greyed out ,how do we enable it,is it a configuration setting or some code change in the function module
    PTRA_UTIL_GENERAL_DATA_FIELDS
    My portal consultant said that this FM is called in the backround R/3....please let me know ure views on this...
    Thanks,
    Best Regards,
    Karthik

    Hi Kartik,
    We are getting the same problem. Can you please share how did you solve this.  It is urgently required.
    Thanks,
    Vishal Patel

  • Error message while creating Appropriation Request

    Hey there,
    I am getting Error message while creating Appropriation Request.
    I have done all the confiig according to SAP Best Practices U30 Investment Management.
    When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
    Any help would be greatly appreciated
    RAISE_ exception
    Runtime Errors         RAISE_EXCEPTION                                                            
    Date and Time          18.07.2011 07:15:07                                                                               
    ShrtText                                                                               
    Exception condition "ERROR_IN_STATUS" raised.                                                                               
    What happened?                                                                               
    The current ABAP/4 program encountered an unexpected                                         
         situation.                                                                               
    Error analysis                                                                               
    A RAISE statement in the program "SAPLAIA_TOOL" raised the exception                         
         condition "ERROR_IN_STATUS".                                                                 
         Since the exception was not intercepted by a superior program                                
         in the hierarchy, processing was terminated.                                                                               
    Short description of exception condition:                                                                               
    For detailed documentation of the exception condition, use                                   
         Transaction SE37 (Function Library). You can take the called                                 
         function module from the display of active calls.                                            
    Trigger Location of Runtime Error                                                                
         Program                                 SAPLAIA_TOOL                                         
         Include                                 LAIA_TOOLU11                                         
         Row                                     119                                                  
         Module type                             (FUNCTION)                                           
         Module Name                             AIA_TOOL_GET_STATUS                      
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    89 *                TYPE       = SY-MSGTY                              
        90 *                CL         = SY-MSGID                              
        91 *                NUMBER     = SY-MSGNO                              
        92 *                PAR1       = SY-MSGV1                              
        93 *                PAR2       = SY-MSGV2                              
        94 *                PAR3       = SY-MSGV3                              
        95 *                PAR4       = SY-MSGV4                              
        96 *           IMPORTING                                               
        97 *                RETURN     = ls_return.                            
        98 *   endif.                                                          
        99 *   if not ls_return is initial.                                    
       100 *      append ls_return to return.                                  
       101 *      raise error_in_status.                                       
       102 *   endif.                                                          
       103 *                                                                   
       104 *  Füllen der Ausgabetabellen                                       
       105    perform fill_output_tables tables lt_status                      
       106                                      lt_jsto                        
       107                                      et_appreq_status               
       108                                      et_appreqvarnt_status          
       109                                      et_appreq_user_status          
       110                                      et_appreqvarnt_user_status     
       111                                      lt_objnr                       
       112                                      lt_objnr_varnt                 
       113                                      lt_return                      
       114                               using  i_language                     
       115                                      i_with_text.                   
       116                                                                     
       117    if not lt_return[] is initial.                                   
       118       append lines of lt_return to return.                          
    >>>>>       raise error_in_status.                                        
       120    endif.                                                           
       121                                                                     
       122                                                                     
       123 ENDFUNCTION.

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

  • ARQ: What is the authorization object to restrict system selection while creating a request???

    Hi All,
    I am trying to know how I can restrict a requester to select specific system only while creating a request.
    I could find aut. object GRAC_ROLEP in role "XXX_requester". There is field GRAC_SYSID in this object wherein
    I can specify the connector name. Initially, it was having "*" value and then I changed it to specific
    connector. I sychronized the roles/users data and tried to raise a request. However, I still find all the
    connectors defined including LDAP!
    May I know how I can show only "required" connectors while creating a request?
    Regards,
    Faisal

    Dear Faisal,
    use GRAC_SYS and restrict GRAC_SYSID to the systems you want to display.
    Regards,
    Alessandro

  • Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

    Hi Team,
    We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
    We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
    Please suggest how to do this.
    Thanks,
    Ravi

    Hi Rajesh,
    Thanks for the reply...
    We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
    So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
    Thanks,
    Ravi.

  • No popup to select active implementation cycle, while creating change Request

    Hi,
    I have two active Implementation projects.
    While creating change requests, it is not giving any popup to select the specific cycle.
    It automatically assigns to newly activated Cycle.
    Please advise.
    Thanks & Best Regards,
    Kiran Sathyan

    Hi,
    if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
    Now I dont think so Popup functions applicable for implentation cycles.
    check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
    and regarding closing the project cycle check this out below informations,
    933705 - Closing inconsistent project cycles
    Change Request Management scenario: Usual questions and known errors
    question 10.
    Make sure you closed open tasks, chk in tcode scma
    Thanks
    Jansi

  • Wrong date after new photo

    The new Photo app was installed and some photos and full folders got the wrong date. I could not find a way to edit the date as single photo or from a folder like we had before on iPhoto. Is this something the developers forgot or there is a magic key combination to make it happen?
    Best Regards,
    GugaRibeiro
    Attached a screen shoot with a 2018 picture... the mac is now showing our future pictures...

    and to make things even more strange i just logged in to Photos online through icloud and  have a picture that was taken last Friday 1st May but online Photos is saying that it was taken 30 December 2014
    Photos app on MAC
    Photos app on Icloud.com

  • Entering Project Details while creating Direct PO

    While Creating a Direct Purchase Order(without requisition) for a Project.
    When navigating thru ... PO>Shipping>Distributions>Projects Tab
    the Projects and Tasks fields are greyed out(disabled)
    any idea y??

    Hi
    When you enter a purchase order line for an item, the system default destination on the distribution line as INVENTORY.
    In such case the system verify that the receving inventory organization is enabled for Project Manufactuirng. Otherwise it will not allow you to enter project distributions.
    You should change the destination to EXPENSE. After that the distribution lines will allow you to enter project data on the appropriate fields.
    Dina

  • Freight cost to be included in the Raw material cost while creating VL31N

    Hi all,
    We are purchasing raw material from other country. we are paying freight for the imported material.
    My requirement is, when doing inbound delivery freight cost has to be included in the raw material cost.
    Now its not getting included in the raw material cost.
    What are all the necessary steps to be done to include the freight cost into the raw material?
    Thanks in advance,
    Babu

    Hi,
    You can create dummy material inmaterial master record.
    You can enter the material manually while creating inbound delivery, which will come as unplanned delivery cost.
    Br,
    Tushar Patankar

  • Need to change forecast data thru planning book + doubt while creating POS

    hi friends,
    my application creates forecast data for following.
    product , location start date , end date.
    i need to put this data into APO(DP).
    i know i can do it using BAPI CHANGEKEYFIGUREVALUE2 of Planning Book APs
    my doubt is while create a Plng Object store, what fileds do i take as charachteristics which match these, please reply if have some clue

    Hi Rohit,
    I believe i misunderstood your first post. I had given the BAPI parameters that you need to fill up for the given business requirements you have mentioned. I realized you were asking about the POS.
    Answer to Q1: You can not place time characteristics in the POS. You will define the "time characteristics" in your Planning Area by specifying a relevant storage bucket profile.
    Answer to Q2: You dont need to add time characteristics in the POS.
    Answer to Q3: 9AVERSION is not included in the POS. However, when you use BAPIs BAPI_PBSRVAPS_GETDETAIL and BAPI_PBSRVAPS_CHANGEKEYFIGVAL to read/write data from/to the planning area you need to supply a selection for the planning version (9AVERSION).
    Hope this helps.

  • Run time Error while Creating Expense request

    Dear Friends ,
    In   E-Payment ( Expense  Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.    
    Run time Error Info :
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis  
        An exception occurred that is explained in detail below.
       The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
        caught in
       procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
       Since the caller of the procedure could not have anticipated that the
       exception would occur, the current program is terminated.
       The reason for the exception is:
       You attempted to use a 'NULL' object reference (points to 'nothing')
       access a component (variable: "LR_CONTEXT_ELEMENT").
       An object reference must point to an object (an instance of a class)
       before it can be used to access components.
       Either the reference was never set or it was set to 'NULL' using the
       CLEAR statement.
    How to correct the error 
         Probably the only way to eliminate the error is to correct the program.
       If the error occures in a non-modified SAP program, you may be able to
       find an interim solution in an SAP Note.
       If you have access to SAP Notes, carry out a search with the following
       keywords:
       "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
       "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
       "PRESET"
    Information on where terminated
        Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
         in "PRESET".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 60
        of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
        The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
        procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
         code begins in line
        1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
    Regards,
    Suresh .

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

  • Error while creating billing request thr tcode DP91

    hi,
    while creating a billing request through dp91 we are getting an error mesage : "Error during material determination for sales document item 40000067/000020". i have checked the material determination for the material, but there is no material determination maitained for the material, the material here is a service material, after creating a contract we are trying to create a billing request through DP91. this is where wer are getting the error message.

    Hi,
    It looks like the DIP Processor cannot determine a material.Go you your DIP Profile and check the Material Determination settings
    Also run TCode ODP2 to check the consistency of your DIP Profile and also chk Material Origin field was not checked in the Costing tab of the material master.
    Check above and revert back.
    Regards
    Ashu

  • GOS: create attachment sent by PI while creating Service Request

    Hi Friends,
    I am developing a custom FM which creates Service Request Notification(QMEL).
    This FM will be called by PI with data using web services and gets back the results after execution of function module.
    PI receives the attachments also from the other systems which should be sending to ECC to create the attachments also.
    PI sends Filename, file type, file data text or binary which will be sent to FM to an internal table..
    I am trying to use the internal table data to create attachments in the FM. I am stuck here.
    Are there any thoughts how I should get data from PI to ECC to achieve the functionality??
    I appreciate if anyone gives me an idea how to proceed?
    Regards,
    Satya Denduluri.
    GOS: create attachment sent by PI while creating Service Request

    Hi,
    did you try business object SOFM ( transaction SWO1 ) ? It offers a lot of methods around attachments, documents.
    Regards
    Dirk

Maybe you are looking for