Dist. of Header Condition based on the material Value
Hi All,
I have one query regarding the header Condition.i have selected the Calculation type as B - fixed amount (mandatory) for a particular Condition type and also selected the header and Item condition indicator.Now if the material have more than one line item then the system distributes this condition based on the quantities in PO.
My client requirement is that they want to have a header condition as we are using now. But they want to distribute this header condition according to the material values for each line items in a PO. please Mention that this condition is a fixed value (mandatory).
So, how can we make a Fixed Value (Calculation type) for a header condition to be distributed among the line items based on the base Value?
Please revert back asap.
Sure, points will be awarded for the same.
as explained earlier ,
system is distributes the header amount on the basic of value calculated by Basic X qty
e.g.
header value =100
two line item
1 is with Rs 4/- and qty is 10
2 is with Rs 10/- and qty is 15
so distribution is
Rs 21.05/- for 1st item
and
Rs 78.94/- for 2ed item
regards,
sujit
Similar Messages
-
Make field in Material master mandatory based on the material group
Hello all,
I need to make the field "post to inspection flag" mandatory based on the material group while creating the Material master.
I found options for making the field mandatory based on Material type,Industry sector and plant NOT based on the material group.
Could anyone please provide suggestions on setting up the field as mandatory based on material group while creating material master
Thanks,
SreHi Sre,
You can make Material Group field as Mandatory while Creating Material Master.
SPRO>Log General>Material Master>Field Selection>Maintain Field Selection for Data Screens
Select Screen # 48
In the Field selection (Field Ref.) of (MARA - MAKTL) screen , Change the settings from Optional to Required Entry for T Codes MM01, MM02 or you can select the Material Type ;
Please note this by choosing this selection the fields of Profit Center and Division will also become Mandatory.
Hope this helps,
Best regards
Amit Bakshi -
"Conditions" button at the material master - Change the related condition
There is "Conditions" button at the material master ("Sales: sales org. 1" tab). We can make condition record of PR00 by this button but at our system the condition for the material price is different (it isZPR0 at our system). How can I change the related condition type as ZPR0 for this button?
Thanks in advance for the answers....Check program LMGMMF0Q and FUNCTION SD_COND_GET_DEFAULT_CONDITION for details.
It looks it is hard coded, but they also mention that Via a user exit (business transaction event), the
default KSCHL and KOTABNR can be set.
Regards, -
Inspection types to be defaulted based on the Material Types
Hi Guys,
Do we have any specific setting to maintain the Inspection Type to be defaulted based on the Material Type.
For Example:We have inspection Type 01& 07.....This Inspection Type has to be defaulted to the One material Type when ever we are creating the material.
Pl suggest me.
Regards
KumarDear in Standard SAP it is not possible.
check this relevant thread : DEFAULT VALUE OF INSPECTION TYPE IN MATERIAL MASTER.
Cheers
KK -
Freight Calculation based on the net value of the Line item
Hi SAP Gurus,
I have one requirement for Freight calculation(Sales order is created through an IDOC) :
In the idoc,we will receive a freight dollar amount - which will be the total amount of freight.(example 100)
We will also receive sales dollar for each line item ,which is then passed to the pricing procedure, for a total amount of sales for that Sales order.
(examples below, for a total of 1500)
The 100 is to be posted to a freight G/L account.
The 100 is further divided by each profit center of the materials on the Sales order.
The freight is split out amongst the profit center , based on the net value of the line item.
Freight value to be allocated = Line item value/total value of the sales order * Freight amount.
Total of the sales order =1500
Line item value Freight value calculation Profit center
Material A: 800 800/1500*100 = 53 Profit center A
Material B: 500 500/1500*100 = 33 Profit center B
Material C: 200 200/1500*100 = 13 Profit center C
Please let me know how to achieve this functionality in pricing procedure or what changes i need to make in Freight condition type.
Thanks in advance,
Bhakar SahaWere you able to resolve this issue of allocating freight costs to line items/profit centers using the net value of the line items?
-
Setting the series color of a bi beans graph based on the data values
How do I conditionally set the series color of a bi beans graph based on the data values?
I am using the following code to get the data values and set the series color:
Graph gr=(Graph)CmdrDashboardP1_pres1.getView();
DataAccess da=gr.getGraphModel().getDataAccess();
DataDirector dd=gr.getDataDirector();
DataMap dm=dd.getDataMap();
int re=dd.ROW_EDGE;
int ce=dd.COLUMN_EDGE;
Object val=da.getValue(re,ce,dm.DATA_TYPE);
int seriesCount=da.getEdgeCurrentSlice(DataDirector.ROW_EDGE);
if (val <=45.0)
gr.getSeries().setColor(new Color(255,0,0),seriesCount);
I get a NullPointerException from the line of code "Object val=da.getValue(re,ce,dm.DATA_TYPE)." I have tried the code with DATA_UNFORMATTED as well, but get the same exception. When I print the DataMap value of dm the results are [dataUnformatted, dataViewFormat, value, dataIsTotal, dataType].
Also, I get the error "method <= (java.lang.Object,double) not found in class _CmdrDashboardP1" from the "if (val <=45.0)" code.
Thanks for any assistanceHow do I conditionally set the series color of a bi beans graph based on the data values?
I am using the following code to get the data values and set the series color:
Graph gr=(Graph)CmdrDashboardP1_pres1.getView();
DataAccess da=gr.getGraphModel().getDataAccess();
DataDirector dd=gr.getDataDirector();
DataMap dm=dd.getDataMap();
int re=dd.ROW_EDGE;
int ce=dd.COLUMN_EDGE;
Object val=da.getValue(re,ce,dm.DATA_TYPE);
int seriesCount=da.getEdgeCurrentSlice(DataDirector.ROW_EDGE);
if (val <=45.0)
gr.getSeries().setColor(new Color(255,0,0),seriesCount);
I get a NullPointerException from the line of code "Object val=da.getValue(re,ce,dm.DATA_TYPE)." I have tried the code with DATA_UNFORMATTED as well, but get the same exception. When I print the DataMap value of dm the results are [dataUnformatted, dataViewFormat, value, dataIsTotal, dataType].
Also, I get the error "method <= (java.lang.Object,double) not found in class _CmdrDashboardP1" from the "if (val <=45.0)" code.
Thanks for any assistance -
How to handle vendor discounts based on the qty / value procured.
Hello
How to handle vendor discounts based on the qty / value procured.
a. Scenario: you have entered into a contract with vendor that you will buy goods worth Rs 10000/- and if you buy goods worth more than 100000 the vendor says he will give a discount of Rs 5000/- @ the end of the year.
i) How to handle this sceneriou2019s with SAu2019s
ii) What does STD SAP offer.
Regards
Sapman manHi,
For the discucount condition type, you have to maintain scales.
Take Condition type - Discount Value ( RB00)
Discount Value ( RB00) - Means Fixed discount. For this condition type, you have to maintain Scale basis as Value scale 'B' in the condition type customization.
Transcation : M/06
Select your condition type RB00 and click on the details icon.
In the Scales block, you have to maintain and save.Calculation type = Fixed amount
Scale basis = Value scale 'B'
For this condition type, you have to maintain scales in the inforecord.
Transcation : ME12
Select this condition type, click on the Scales icon. There you have to maintain like
From : 10,0000 Rate: 5000.
It means, if the document value is reached 10,0000 then discount is 5000rs. If the value islessthen the 10,0000 then no discount.
Regards
KRK -
Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu NHey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS) -
Is there a way to hide some reports based on the selected values in prompt.
Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
AshishHi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/ -
How to find bpel instance in 11g based on the index values using Java APIs
Hi ,
In SOA10G we had option to find the instances based on the index value using Java APIs like below.
WhereCondition criteria= new WhereCondition(SQLDefs.CX_index_1 + " = ?");
criteria.setString(1, "indexValue");
Locator mLoc = getLocator();
IInstanceHandle[] foundInstances = mLoc.listInstancesByIndex(criteria);
Please tell me how to achieve the same functionality in SOA 11G using Java APIs
Regards,
SabaI have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???
-
Hide multiple rows in a dynamic table based on the row value.
Hi,
I need to hide multiple rows in a dynamic table based on the specific value of that row.
I cant find the right expression to do that.
please helpGo to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona -
How to view the Material Value Involved in the WIP Closing Balance Report
We are able to see the Itemwise WIP Closing Value using KKAQ.
We have one requirement that to know the Material Value & Quantity Involved in the WIP Closing Balance Summary.
How to fetch the information for Material Value , Process Value With Quantity on Itemwise from WIP Closing Balance.?
Thanks in Advance
Regards
K.NatarajanDear Premkumar,
Thankx for your reply. But when we execute the T-Code KKBC_PKO for an Item, It is giving an error like "No product cost collector exist for material/plan/prod.process <Matl.COde>"
How to see this report.
Regards
K.Natarajan -
How to increase the salary based on the percentage value
Hi All,
Could you please let me know which API need to be used to implement the hike in salary based on the percentage value. And what all the parameters to be used.
Appreciate your help...
Thanks...Dear All,
Any luck on this please?
thanks.. -
using Shading Dictionary to perform shading in pdf,before that the shading dictionary call from Pattern Dictionary.In the Pattern Dictionary there is an Matrix based on the matrix value location the shading operation is perform,So i dont know how to calculate value of pattern Dictionary matrix value.
10 0 obj
<< /Type /Pattern
/PatternType 2
/Shading 11 0 R
/Matrix [1.00 .00 .00 1.00 54.00 53.00] // the matrix value how to calculate
>>
11 0 obj
<<
/ColorSpace /DeviceRGB
/Function 12 0 R
/ShadingType 2
/Coords [109.2726 69.00 109.2726 .00]
/Extend [true true]
>>
12 0 obj
<<
/FunctionType 0
/Domain [.00 1.00]
/Range [.00 1.00 .00 1.00 .00 1.00]
/Size [1002]
/BitsPerSample 8
/Length 3006
>>
stream
here is an stream of colors
endstream
endobj
Can anybody help me please.
Regards, Sasi kumar sekar.Hi, Sasi -
The Matrix maps coordinates in your shading dictionary into User Space. That is, the Matrix entry in the Pattern dictionary specifies a coordinate transformation that will be applied to coordinates specified in the shading dictionary.
To take your example, you have an axial shading extending from (rounding off) 109,69 to 109,0. Your Pattern dictionary specifies the Matrix
[ 1 0 0 1 54 53 ]
This transformation matrix corresponds to a scale of 1,1 (that is, no change in scale) and a translation of 54,53. Thus, the actual endpoints for the axial shading will be the User Space positions 163,122 and 163,53 (assuming I’ve added correctly).
As to what values to use for your Matrix, it depends on how you’ve set up your Shading dictionary. If the coordinates you’ve specified are actually where you want the gradient to go, then just use an identity matrix
[ 1 0 0 1 0 0 ]
By the way, are you sure that the Pattern dictionary includes a Matrix entry? I seem to remember (it's been a while since I've looked at Patterns) that the matrix is supplied as an argument to the makepattern operator:
<<patternDict>> [ 1 0 0 1 0 0 ] makepattern
Hope that helps.
- John Deubert
Acumen Training
PostScript and PDF
Training & Consulting -
How to find bpel instance in 11g based on the index values
We have 10g BPEL process where we define 4 index values for all the instances. Whenever support request comes, we ask index values and based on that we search the process instance.
We have migrated this 10g bpel process to 11g now. How to find bpel instance in 11g based on the index values ???I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???
Maybe you are looking for
-
Past events are being altered automatically
For some reason my calendar has started to delete the contents of some past events. All events are in one iCloud calendar. I can't work out whether they were created on the iPad, iPhone or iMac in terms of synching. I need these to research comment
-
We want to prepare a central SLD by merging many instances of current local SLDs. We found note about merging and grouping instances... it is ok. My question deals with next steps because we want to keep local SLD in Production instances (PI, BW inst
-
Is it possible to buy "cheap" DAQ equipment for personal use?
Hi guys! I'm a huge fan of LabVIEW and I use it every day at work These days I've bought a house for me and my girlfriend. As we're currently renovation the house I got this crazy idea; why not make my own "smarthouse"??. I have LabVIEW at work so I
-
When do we use statement triggers? i need one practical example... like row level triggers help in audit or journalling. Plz reply asap.
-
Xcode crash when opening project
Hi, my MAC book is late 2008 mode with 4GB RAM upgrade. XCode works fine with Snow Leopard. I upgrade to lion recently and install xcode 4.1 from App Store, however, I never been able to open or create any project. It's crash. Here is the crash log.