Distorted video in finished dvd.

Hello, this is my first dvd I created.
From premiere I exported a 3min long avi video.
Aspesct Ratio: 720x576
Pixel aspect ratio 1,422.
Copressor: Indeo Video 5.10.
Interlace: Lower Field First
In Encore DVD I imported the video as an asset, menu is set to PAL 16:9. All works fine in preview view. But when I play the finished DVD the video looks like the picture in the link below, the menu works fine. But when I try to play the transcoded video in Encore Preview after I completed the burning. I got an error message "abnormal condition". And after that I am not able to import the 3min avi file, I got the error message: Error loading transcode preset.
You can see the snapshot here:
http://forum.videohelp.com/images/guides/p1506704/snapshot20060423165953.bmp
What is happening?

Martin,
Did you try exporting as DV AVI yet? (Also see:
Video in finished DVD is really distorted
in the PPro forum.)

Similar Messages

  • Why am I getting wavy, distorted video on a DVD made with iDVD?

    I made a DVD with iDVD 5 that has wavy, distorted video. It is watchable but you can clearly see that vertical lines are somewhat wavy whenever the camera pans across the scene. An up-down pan doesn’t distort the horizontal lines, however.
    The source video file doesn't display this waviness. Also, I created a DVD of the same video using a PC and the resultant DVD didn't display the waviness. The waviness occurs whether the DVD is played on the computer or a TV monitor with a standalone DVD player. From all this I conclude that it has to be a consequence of the iDVD5 burning process.
    Here’s some additional information: The PC burned the video from its original MPEG-2 format. The Mac burned the video from a .mov file that I created from the original MPEG-2 file using MPEG Streamclip. (I need to use MPEG Streamclip to restore (actually convert, I suppose) the audio as the source file has AC3 audio that doesn’t play in iMovie or Quicktime.) The resulting .mov file - when played with Quicktime before burning - does not exhibit the waviness, so I don't think the MPEG Streamclip conversion process is at fault.
    On the same DVD I also placed a different video from the same source. It doesn’t display any of the waviness that I get from the other video. The only difference between the videos is that this latter video – after the MPEG Streamclip processing - was chaptered in iMovie HD and then exported to iDVD as a .mov file. I’d hate to think that I have to run every video through iMovie to eliminate the waviness.
    So is this just an inexplicable defect or is there something that I might do differently to avoid the waviness that I’m getting in this video?
    Thanks, Robert
    Powerbook G4   Mac OS X (10.4.4)  

    Robert,
    To me, the red flag is that you've created a .mov file from Quicktime for import back into iDVD. A .mov file is generally a smaller formatted movie, typically only 320X240 pixels in size. This size movie, by default, would look perfect when played in QT. But, to go back to iDVD or iMovie, the movie must be expanded back to a 720X480 size movie (typically the DV stream that these programs want and need), so expanding will cause all sorts of distortion. Can you go back to your original MPEG2 source movie and get the movie info on it? You should be able to see the original size. If it is something like 640X480 or 720X480 then use QT to create a .DV file. This will maintain the original size.

  • How much video on a finished DVD total?

    I'm authoring my first DVD and I don't know how much video each DVD can hold. I'm putting together a seminar that is 18 hours of total video.
    How much compressed video can each DVD hold?
    On one of the DVD's I plan a slideshow of some 40 pics. The rest of the DVD's will contain video only.
    thanks!
    G4 Dual 1.25   Mac OS X (10.2.x)  

    Depends on how you compress the footage.
    http://dvdstepbystep.com/faqs_7.php discusses how to calculate the rates
    The rates also depends on the type of footage, talking head type video can still look good with lower rates, while race cars will usually be better with higher rates.
    Kind of broad stroke - in general 2 to 2 1/2 hours or so can usually look good on a single sided DVD-R but it varies. 2 Should usually be easy to do
    There were some threads awhile back discussing all possible ways to squeeze the most onto a disc
    One was here and Hal has some good info
    http://discussions.apple.com/thread.jspa?messageID=3956144&#3956144

  • How do I include the photos in a imovie project to the finished dvd so the users can have access to them?

    I've included alot of old photos in an iMovie project and would like to include them on the finished DVD I create with iDVD. I woud like the users to be able to have access to them so they can print them, store them on their own computer or whatever they would like to do. How would I do this?

    You do this by creating a DVD-ROM section on your DVD. See this explanation from iDVD Help.
    Adding files to the DVD-ROM portion of a disc
    You can let viewers copy files directly from your DVD by adding the files to the DVD-ROM portion of the disc. These files are burned onto the DVD and are accessible when the disc is viewed on either a Windows PC or a Macintosh computer, but not a DVD player.
    You can add any kind of file to the disc. For example, if your disc contains a slideshow, you can add the image files to the DVD-ROM portion of the disc so viewers can download them to their own computers and print them. You can also add a file containing your movie production notes and other “extras.”
    To manually add files to the DVD-ROM part of your disc:
    Choose Advanced > Edit DVD-ROM Contents.
    The DVD-ROM Contents window opens.
    Click Add Files, or click New Folder first if you want to create a folder to put the files in.
    Browse to select your files or folders, then click Open to add them to the disc.
    You can also drag files directly to the DVD-ROM Contents window. When you are done, just close the window.
    When you add a file to the DVD-ROM portion of your disc, before you burn the disc the project contains just a reference to the location of the file on your hard disk, not the actual file. So if you delete a file from your computer or move it from its location after adding it to the DVD-ROM contents, you get a “File not found” message when you try to burn your disc. You can either remove these missing files from the DVD-ROM contents or find them on your computer and put them back in the original location so iDVD can access them.
    As you add files to the DVD-ROM contents, be sure to check the DVD Capacity meter in the Project Info window to find out how many gigabytes of disc space are being used. The Capacity meter shows the disc space taken up by the video portion of the disc as well as the DVD-ROM portion.

  • Missing media in finished DVD but not missing in Timeline

    Dear Gurus and others-who-know-far-more-than-I-do
    In my latest video, exported from PPro (CC 2014) via Media Encoder and Published with Encore CS6...my finished DVD has a number of red "Missing Media" spots, but going through the PPro timeline there does not appear to be ANY "Missing Media".  I've never had this problem before.  Any ideas, anyone?
    Regards
    Roy

    Please do not EVER download a codec pack !!!
    Some people who have done so have then had to wipe their hard drive and install fresh to fix the problems
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    What you LIKELY have is an issue with the MJPEG codec... so IF that is what is inside your file, read...
    MJPEG http://forums.adobe.com/thread/730396

  • Distorted video - too wide

    I have posted about this on Crackberry.com.  But maybe should bring it up here.
    The main problem is that when viewing a video on my Z10, images are stretched left to right and so people are wider than normal and also objects like buildings, etc also are too wide.  It is less noticeable in landscape screens.  Upon a suggestion I received today, I opened the same video in the Z10's Browser and the video is NOT distorted.  But I think that the app should work properly.
    Here's some extracts from the thread:
    http://forums.crackberry.com/blackberry-z10-f254/distorted-video-too-wide-849144/
    I copied a homemade mp4 file to the z10 of one of my vacation trips (I create a dvd movie from the digital photos). The image is "widened" and frankly I don't need any help in the WIDENING area. It seems to show correctly on my PB and on my computer. But on the Z10 it is wide. Pinch does not HOLD - bounces right back to wide.
    There does not seem to be a setting to alter this behavior or appearance. If not connected to the tv, the DISPLAY/hdmi setting is grayed out.
    I just created a new video. Since the phone was going downstairs, I copied the mp4 video to the phone. Plugged it into my tv but, once again, the images are distorted - too wide. So the screen is spread left to right and people are too wide. The effect is less noticeable on Scenery but you can see it for buildings and such. And, it is not just on my TV but it is also evident on the Z10, itself. So, the z10 appears to not be displaying the image or video WIDTH correctly.
    I then copied the same video to my Playbook (another BB device) and the video is fine and NOT DISTORTED.
    I am still on the original Verizon bb10.1.xxxxxxxxxxxx OS.
    Any idea if there is a setting on the phone that I am missing.
    **bleep**! I had not thought about opening the video in the Browser. You are RIGHT - the video proportions are correct when opened in the Browser. So this is a definite bug in the Video app's software or settings. Of course, one should not have to go into the browser to view videos because the app is BROKEN.
    I wonder if Kalemsoft or other video apps performs correctly?
    When I first posted the thread, I did not know if it was my desktop software's coding or resolution or .... So I burned off the video in format after format to no avail. I am somewhat surprised that no one else has raised this issue. Maybe I will take it to the official bb forum.

    derf1 wrote:
    Since I have installed the new update for my Z10 the pages are oversized and I am unable to get to many of the functions in different areas. How do I re-install the software?
    Check Accessibility, magnify mode may be ON.

  • IMovie 09' poor video quality on DVD

    I'm using the latest updated iMovie 09, and using iDVD to burn the final project.
    The picture quality is not very good on the finished DVD.
    Here is what I did:
    Compose and edit 7 short projects in iMovie 09, send to Media Browser (as "large" files), export to iDVD, add theme and titles, and burn.
    When I view the completed project on the screen before burning, it looks GREAT! .. but when the DVD is played it is not crisp/sharp. I'm very disappointed in the final results.
    The imported media was both video and digital pictures.
    What is going wrong? .. any ideas .. how about it Steve Mulins or anyone else...
    I'm desperate !!!
    Chuck
    Chico, CA

    The problem is NOT iDVD 09 (or iDVD 08).
    There is a significant regresssion in quality of the image between iMovie 06 and 09.
    I did a compare one day using the same clip burned to DVD from iMovie 06 and from iMovie 09.
    The iMovie 06 clip looked like it came from the DV camera directly and the iMovie 09 clip looked worse. The difference is the single field processing used by iMovie 09 and the fact that it throws out every other horizontal line.
    If your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie '08 / 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
    iMovie 06 and iDVD 08/09 is a "lossless" combination.

  • Color Bars Flickering in Finished DVD

    I have been converting my 8mm analog videos using a Pinnacle converter. Using imovie I create movies and then create dvds using idvd. My finished dvds tend to have flickering (rolling) color bars in the movie. These bars are usually horizontal and appear in images which are usually vibriant red and blue (happens in ilife 4 & 5).
    This condition does not appear in imovie, it only appears in the final burned dvd. I don't get the condition when I make movies with DV from my new Sony DV camcorder.
    Any ideas?
    Rich

    It may not be a feature of your DVD, but of that particular DVD player or TV screen (..if you're watching it on a TV).
    Some players - and TVs - play 'interlaced' video, and others can play 'progressive' video.
    iMovie generally shows video in the format which computer screens show it; that's to say a whole picture at a time, refreshed, say, 75 times a second. 'Interlaced' TV shows pictures refreshed 60 times a second (in the US) or 50 times a second (Europe) ..and each of those pictures has just half the complete picture ..showing odd or even interwoven horizontal sections (lines) of the picture.
    'Progressive scan' devices (players and TVs) collect both those halves, then display all the picture, either 30 times (US) or 25 times (Europe) a second. Some people say that gives a 'sharper' picture, but others find that it 'flickers' slightly, and looks more jerky.
    Sometimes those 'fields' (half-pictures) get reversed, so that movement seems particularly jerky, or 'backwards-jumpy'.
    The characteristic you're seeing - if I understand you correctly - may be incorrect 'interlacing' by the Pinnacle, giving emphasis to the 'wrong' field (..in the US, in NTSC video, it's upper field [half-picture] first; in Europe [PAL video] it should be lower field first.
    You probably wouldn't see any result of this in iMovie, or on a computer screen ..but when seen on a TV it can give this odd 'fringing'.
    Also, anything with vibrant red is difficult to process well in video (..professionals avoid solid reds, and try to 'weaken' them to prevent 'bleed' or other artifacts at the borders between red and other colours).

  • Video on burned DVD drops about 5 minutes in

    So my graduation open house is this weekend. I created a slideshow using iMovie, brought the file into iDVD, and set up the menu and all that. On the computer, it ran very smoothly. The burning process also went very smoothly. I was able to put it into my DVD player, and the menu came up perfectly.... everything was still running great until about 5:25 into the movie, when the screen went green. The audio remains unaffected throughout the entire movie, but the video never resumes.
    I tried re-burning it after changing my energy-saving preferences, in order to avoid computer sleep while burning. This didn't change anything. Also, it behaves the same way in my Macbook as it does in my DVD player, so I'm pretty sure it's not a compatibility problem.
    I am currently trying to burn it using a PC (I had to create a disk image file, convert it to .iso using Disk Utility), but I'm not sure if that's going to work. Does anyone know the cause of this problem? I had a friend who had this exact thing happen to him when he made his open house slideshow.

    Hi Brianna Rae
    And welcome to apple discussions. You're correct in not allowing your mac to sleep while encoding or burning through iDvd. If you forget about this option and walk away from your computer, then the net effect is a green screen on the finished dvd.
    What I suggest in this situation is to first make a disc image. Double click on the image and then use apple's dvd player app to test for proper playback. Assuming it plays as expected, then use Roxio Toast (or apple's disc utility) to lower the burn speed to 4x. Choice of media is important here and I recommend using Verbatim or Maxell (your choice).
    Lastly, follow the advice in apple's KB:
    http://support.apple.com/kb/TS1044
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Judder in finished DVD

    I've had this problem for some time using the old iMovie HD/iDVD/Toast.  Now I'm using the latest iMovie and Yosemite I hoped the problem might have disappeared, but sadly, no.
    My proble is in bad judder
    Movie footage shot using a Camcorder, and 3 different cameras was imported into iMovie and edited.
    From here I tried 2 different methods to encode and produce a finished DVD.
    1st method:
    The finished movie was shared to "File" resulting in a .mov of around 52GB.
    This file was 'imported' into iDVD (which I still have from my pre-Mavericks days) and titles etc added.
    A Disc Image was created using iMovie.
    The disc image was opened and the Video TS folder was dropped onto Toast Titanium.  A DVD was burned at the lowest possible rate.
    2nd method:
    As above, the movie was shared to "File" resulting in the same .mov file.
    This file was dropped into Toast which encoded it (correctly using PAL) and, as above the DVD was burned at a low speed setting.
    In both cases the final DVD when viewed on a new iMac (the one which created the movie) has severe judder on virtually all panning shots and in movies created using Photo To Movie app.
    The same .mov movie viewed using QuickTime is far far  smoother in the above mentioned sequences.
    Can anyone please suggest where the problem may lie?
    Best,
    TonyT

    Thanks - I redid the project - used the DVD/hard drive as the source, checked using GSpot and found that the video did need an interlace change to reverse the field dominance (& did that), but the result still wasn't good, so I tried again & found the best solution was to burn with no interlacing at all.
    Checked the disc on 3 different DVD players & it worked great on all of them! Now I can get back to the old projects that had stalled.
    Appreciate your help.

  • My finished DVD is always of a poor quality, help please?

    (Encore cs5.1)
    My finished dvd normally is always:
    Very quiet / Poor sound quality
    Large black bars at the top and bottom of the screen
    Menu doesn't quite fit on the screen (even though it did within encore)
    Reduced video quality (pixelated)
    Can anyone please help me out the best export settings
    to combat these problems?

    Well the video it's self is generally fine until i put it into encore and it gets transcoded and what not and i was wondering what's teh best transcode / export setting for encore basicly but i've answered your questions anyway
    What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
    Cs6
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
    Yes
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    Windows Ultimate 64-bit (Service Pack 1?)
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
    usually .avi however i always experiment for the best result, i'm not sure what codec
    If you are getting error message(s), what is the full text of the error message(s)?
    No error messages
    What were you doing when the problem occurred?
    well there isn't one
    Has this ever worked before?
    never hasn't just poor quality after exproting and transcoding
    What other software are you running?
    well most other Cs6 programs
    Do you have any third-party effects or codecs installed?
    Nope
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
    intel i5 2500k
    8gb Ram
    1 terrabyte hdd
    2 terrabyte external hdd
    nvidia gtx 570
    guess that's all the important stuff
    Are you using Mercury Playback Engine GPU Acceleration?
    don't think so but don't know how to check
    Does the problem only happen with your final output, with previews, or both?
    Generally final output, howver sometimes the previews are off to
    I hope that's what you where asking for
    Message was edited by: ConnorJoe_97

  • How do I burn a video onto a dvd out of imovie 11?

    How do I burn a video onto a dvd out of imovie 11?
    Also the program churns and churns, till I'm able to do something else. Why so slow? Is there any render button?

    Here is a step by step on how to create a DVD from iMovie 10 using iDVD 7.1.2. If you do not have iDVD, you can probably substitute Toast (or one of the programs Pieter mentioned) everywhere I used iDVD (I don't have Toast so can't verify this).
    1. Create a project in iMovie 10.0.1
    2. Go to File>Share>File... and for Size choose Large 540P (960 x 540) and click Next
    3. Choose a location on the hard drive to save the file to.
    4. Wait for the blue circle activity indicator to finish.
    5. In Finder, verify that iMovie created an MP4 file in the location specified in step 3.
    6. Open iDVD and click "Create New Project."
    7. Give the project a name and save it to your hard drive.
    8. Drag the file you created earlier from the Finder into your iDVD project window.
         (or go to File>Import>Video... and choose your video there)
    9. Make any adjustments to drop zones, etc.
    10. Click the burn button.
    11. Insert a DVD and let it do its thing.
    This produces a working DVD for me.
    Here are my software specs:
    OS X 10.9 Mavericks
    iMovie 10.0.1
    iDVD 7.1.2

  • Turning Off An Audio Track From Finished DVD Menu

    Hi, Folks. I asked this question a couple of years ago, perhaps it has been included in recent upgrades.
    I use Premiere Elements 11, happily, to make family activity videos. I would like to have a menu option on the finished DVD to turn on or off the narration track. I see other uses, for example, the music or background noise could be optioned for viewer preference. If PE will not do this, is there a comparably priced alternative? Or, could I make the video in PE and author in another program? I imagine a high end program would include this feature, but there is no income in this for me, so I'd rather spend money doing things that provide footage to make movies of instead of software purchase.
    Thanks in advance.
    Duke

    Duke
    Nothing has change with regard to Premiere Elements (any version) and obtaining from it a DVD-VIDEO on DVD that gives the viewer the option to listen to it with or without narration that was included in the project. You would do best to do a 2 disc production for this - one with and one without narration.
    The idea to have both versions on one Timeline is possible (and we can give you detail how to on that for an appropriate Adobe menu design), but it is space consuming especially if you are dealing with a large project. Are you prepared to go from DVD disc spec'd at 4.7 GB/120 minutes (in reality 4.3 GB) to DVD disc spec'd at 8.5 GB/120 minutes (in reality 7.95 GB) to accommodate this approach?
    As for alternative video editors and their disc menu options, I am not aware of one that could do what you seek.
    Please let us know if we can be of assistance with a step by step on setting up Adobe disc menus (as is) or customized to deal with the two versions on one Timeline idea.
    Thank you.
    ATR

  • Will PE7 burn a long video to multiple DVDs?

    I've been working on a project that uses footage from 15 scientific conference presentations, each one lasting about an hour. The conference spanned two days, and I have two sets of footage plus literally thousands of PowerPoint slides to incorporate. I need to have scene markers set up, so the viewer will have a menu from which to select whether to "view all" or skip to a particular scene (speaker). All that is manageable.
    While I know that PE7 has the "adjust quality to fit media" option when burning the video to disk, what I'd really like to do is have PE render the files with the highest quality, even if it means that the resulting video will span a number of disks. Otherwise, my DVDs will each contain at least three hours of lower quality video. I know my client will be unhappy with this.
    I am separating the entire project into two sections - day one and day two.
    My question is, with day one being about six hours of video, is there a way to set up the burn so that it will maintain a higher quality video? While PE can fit several hours of video on one DVD (?), it sacrifices quality to do so. I want the highest quality video possible. Incidentally, what is a reasonable length to fit on one DVD?
    Do I need to break the project up into many sub-projects, or can I make the entire first day's video one project and have PE automatically break the burn into several DVDs, including scene markers?
    A second question has to do with scene markers. Once I have the entire first days video set up, including scene makers, should I decide to break the project up into two or three sub-projects, is there a way to delete footage including the scene markers? Obviously I can take all the footage AFTER a certain point and delete it and then render that part to disk, but is there a way to delete the footage BEFORE a certain point, including deleting the scene markers? When I tried to do this, the scene markers remained exactly where they were - they were not tied to the actual video.
    Thanks!
    Jim

    Jim,
    PrE has no way to "span" multiple DVD-Videos. It also balks at really long Timelines. My advice would be to assemble your footage into Projects, each one for one disc, so you can keep the quality high.
    If you already have everything in one Timeline, I'd then trim each to equal one disc, do a Save_As (Conference_Disk_01, _02, etc.) for each trimmed Project. Do the navigation for each disc, and then burn. Personally, I'd include Titles at the beginning and the end, to alert the user that they have, say Disc 1 of 6, and also "Insert Disc 2 now." That sort of thing.
    PrPro has a few more capabilities, such as separate Sequences (think mini-Projects inside of a master Project), but I do the multiple disc sets the same way. Each Sequence (or groups of Sequences) is a separate disc, and is Exported for Import into Encore (my authoring program) and each disc is burned at the highest quality that will fit. Just finished a 17 disc Project, and it was handled the same way. Each Sequence was titled with the disc # and the placement on that disc, so I knew what went where. Had about 80 separate Sequences, but it was easy to know which ones went into which DVD/Encore Project. I also had the Disc X of Y on both the front of each disc, plus on the case for it. That way, the user knew where they were in the order, and could get the disc back in that order. You can do the same thing in PrE, but will be using Projects for each disc. A bit of planning will go a very long way in the production.
    Good luck, and let us know if you have any more questions. BTW - for acceptable quality, I'd set a limit of 2 hours for any duration, with maybe 150 mins. as the absolute max. I've "stuffed" 3 hours on a DVD-5, but it is NOT a pretty sight. Can you go with DVD-9's?
    Hunt

  • I have just had all my video converted to DVDs and now I would like to edit them...how do I import them into imovie?

    Can somebody help me figure out how to import my home videos from a DVD into imovie?

    That means 'reverse engineering them'!
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Maybe you are looking for

  • All in one Printer hp psc 1410

    I am having problems printing online. I have done a Printer Test Page which was successful. When I try to print, it goes to the printer page and then it goes away as if something is blocking it. I have just installed Norton Interner security. Could t

  • Time to get charts correct.

    3D bar charts are all very pretty but sometimes people want to represent quantitative data in an genuinely informative way. To this end it is time to provide some simple changes to the way Pages does its graphing in order to provide this resource. (Y

  • AUTHORITY-CHECK before Selection-screen?

    Hi, i want to check the authority before the selection-screen. I do it in this way: AT SELECTION-SCREEN OUTPUT.   AUTHORITY-CHECK OBJECT 'Z_REPORT'            ID 'PROGRAM' FIELD SY-REPID            ID 'ACTVT'   FIELD '16'. "Ausführen   IF SY-SUBRC <>

  • BAPI for MFBF Scrap Transaction

    Does anyone know if there is a BAPI that can do an MFBF scrap transaction? The transaction would need to both accumulate earned hours and issue material.  The processing type would be ZB. Thanks, Lori Enos

  • Wifi Connection issue on iPad 3 when upgraded to iOS 8 onwards

    Hi, I am using iPad 3 from last one year. I didn't faced any issues with old versions of IOS. But after update my iPad OS to 8, I am facing Wifi Connectivity issue. Automatically Disconnecting Wifi when opened third party apps which need internet con