Distribution Error Message
When I try to distribute my form, I receive the following error message:
"Acrobat is not able to create a usable responses file from the returned form because the form restricts needed operations."
"Failed to create a responses file at the location: "REO_MBP_Data:ISP2010New:BCPS - Internet Service Proposal "
The file that works has no password restrictions, while the one with the error message only allows filling form fields and signing existing digital signature fields (it contains no signature fields).
Mac OS X 10.5.6
Firefox 3.0.
Ensure no users are in BD64 also changing the configuration of SED230EREC at the same time. Check source and target, also check your locks in SM12
Similar Messages
-
I cannot download OS X Mountain Lion, I get an error message that says: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Why am I receiving this message?
Servers may be overloaded.
One user reported:
Deleted file com.apple.appstore in /var/folders/, dissabled VirusBarrier X6: problem solved! -
When I try to purchase Mountain Lion i get an error message: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
I can purchase other apps, why not Mountain Lion. I get the same message on my wife's IMAC.The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Hope it helps. -
Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PMThe only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
Distribution point, a TFTP error message
Hello,
I have a problem when I tried to migrate
a computer via PXE Network in an Annex or
there is a distribution point, a TFTP
error message appears as follows:
PXE-E32: TFTP
open timeout.
TFTP.
knowing that this problem does not arise
at the main site.
please help me and thank you in advance.
cdt.
Rayo_MuchachoAs Torsten mentionned, review the requirements for PXE boot.
http://prajwaldesai.com/boot-images-distribution-point-configuration-osd-sccm-2012-r2/
http://gerryhampsoncm.blogspot.ca/2013/02/sccm-2012-sp1-step-by-step-guide-part_9487.html
Benoit Lecours | Blog: System Center Dudes -
Why are we seeing the error message Forms Distribution Aborted?
We have been using Acrobat for years on a Windows XP platform, and now for the past 3 months, Acrobat XI on a Windows 7 Professional platform, creating distributed forms with no issue. In the last week or so we're seeing an error message indicating the Form distribution has been aborted, with an indication that the form is open with another user. It suggests to save as a different name or in a different folder. Saving as a different name doesn't resolve the issue, but saving it to a different folder does resolve the issue and the distribution completes properly. What would have changed and what do we need to do to eliminate saving to a different folder?
Thanks,
RandyHolsome1
I’m sorry to hear about the trouble with your MMS! I’d love to get this fixed. How long has this been going on? What location are you in? Are there any areas it does work for you? All contacts?
YosefT_VZW
Follow us on Twitter @VZWSupport -
Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Mavericks Update - Error message - The product distribution file could not be verified
Help!
Trying to download mavericks (from 10.7.5) as I have just had a new hard disk isntalled and need to start from scratch.
Wanting to re download iphoto but I can't as I need a newer OS so trying to download mavericks from the app store. My internet is very slow and keeps cutting out so I have tried a few times but it's not working.
Now I'm getting an error message - 'the product distribution fil could not be verified'
If anyone can help that would be great.
Or even let me know where I can get a copy of iphoto to suit OS 10.7.5 so I don't need to download a whole new OS.You're trying to download a 5 GB file. If your Internet connection is lousy, you won't have much success. Try another network.
-
I have a problem, i can't generate with DPS App Builder "App distribuzione.zip" to be sent to Apple to publish APP, this is the error message: is not a valid distribution certificate Apple. What do I do?
As Bern510 says, you'll need to recreate certificates that are valid. I suggest following our step-by-step publishing guide, which walks through how to obtain certificates correctly.
http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf
Neil -
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have this error message to but in French : We could not complete your purchase. Impossible de vérifier le fichier de distribution du produit. Il est peut-être endommagé ou non signé.
I have this error message to but in French : We could not complete your purchase. Impossible de vérifier le fichier de distribution du produit. Il est peut-être endommagé ou non signé.
-
Error Message: 'Distribution list still exists in the trash'
HI All
Please help us to provide the necessary solution as per the below query.
1. Which SAP transaction or program can I run to find information on when & what Distribution Lists have been deleted and by whom?
2. we are trying to recreate the same distribution list again by using transaction code S023, we are unable to create the same distribution, we are getting the below error message.
Error Message: 'Distribution list still exists in the trash'
RegardsSAp inbox
-
System error message and application crash - ModName: lvrt.dll Offset: 00080a6a
I'm running into an error message which is proving particularly difficult to debug. After my built application has been running for some time, a windows system error will pop up telling me my application has done something bad and needs to be shut down (and sorry for the inconvenience). Clicking through to the "see what the error report contains" page reveals the issue as being in the lvrt.dll module at offset 0080a6a.
This unfortunately doesn't mean much to me.
On some occasions when I click "Don't Send", another error message pops up informing me there is "Not enough memory available to complete this operation".
The program will typically run between 8 and 24 hours before the error occurs, though I've had it run error-free for upwards of 48.
My program is unfortunately fairly large, and depends on communication with proprietary hardware so can't be uploaded in a functional state. In general terms, the body of the program (which is executing when the error occurs) involves RS-485 serial communication and simultaneous display of data to 7 continuously updating strip charts (producer-consumer design), along with envalope detection and RMS calculations in real time, all of which is multiplied by two parallel channels (around 1Mb/s data rate for each). The data is also buffered and stored in binary files for later review. Binary files are closed and a new one is opened for every 10 minutes of data collection (approx 50MB of data).
There are also about 40 user controls associated with each channel, and are polled periodically (a couple times a second). The crashes occur during over night tests, however, when there is no user input. Globals are used for inter-panel communication, but no global is written to in more than one location (most are read in multiple locations).
I know this is a bit of a shot in the dark here, but does the lvrt.dll error at offset 00080a6a mean anything to anyone? Are there any "typical" causes for a failure in lvrt.dll having to do with prolonged high data rate serial communications? For reference, this has occured on multiple machines, but all the machines it has occured on are identical out-of-the-box laptop models running XP 32. I'm going to try to run an overnight test tonight on the development machine and see if I get any different results (Vista 64 vs Windows XP 32).
I can't say my hopes are high with this one, and I'm gonna continue to comb over the code for any possible conflicts, but any insight would be appreciated.Claire,
Next time the error message comes up I will take a screenshot of it for you. Unfortunately that may not be until Monday, as tonight is the soonest I'll be able to run another long-term test. The time between failures is the most frustrating part to debug!
There are no errors on compiling or building the application in LabVIEW. My testing has been done mostly on the distribution laptops in application form, with no LabVIEW dev tools installed, Windows XP 32 bit.
The overnight test I attempted on the development machine (within the LabVIEW environment) welcomed me the next morning with a rebooted machine, and so I wasn't able to see an error message (if there was one). Vista 64 on the development machine. Reviewing the data files, I got about 9 hours worth before the crash.
Given the time between failures and the large volume of data I'm passing around, this seems like memory leak type behavior. I'm a bit confused by the fact that it seems to fail in lvrt.dll every time, though. I'm don't know what that indicates, if anything. -
A error message from running the jpa-cache-server.cmd file
When I try to run jpa-cache-server.cmd file, it show the following error message:
"failed to load main-class manifest attribute from %coherence_home%\lib\coherence-jpa.jar"
What is the problem?Forgive me but I do not see that file (jpa-cache-server.cmd) in the Coherence 3.5 distribution. With that said, I don't believe that coherence-jpa.jar is a executable jar. What exactly are you trying to do?
If you are trying to start a cache server with the jpa classes available to it I would suggest just adding the coherence-jpa.jar to the class path.
Rob
:Coherence Team: -
Error message for Confirmation
Hi,
We have a error message for back end service entry creation in the Application monitor for Confirmations.
There is no outbound or Inbound Idoc found with error.
From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
Thannks
JimmiHi,
If you are doing confirmation in SRM , it is Extended classic scenario.
error : There is no outbound or Inbound Idoc found with error
You have not created the IDoc for the outbound Idoc for the confirmation to take to the backend.
Create the Message type and partner profile in WE20
Create Distribution model in SRM -T.code :BD 64
we found the PO Number or Confirmation number to check whether the confirmation is posted or not
Soln: Check in confirmation in display/process confirmation in SRM enter the timeframe
(or) check in R/3 in ME23N by putting the Purchase order no and check the goods receipt
Regards
Ganesh Kumar.G.
Maybe you are looking for
-
Adobe flash player for lumia 520
Why can't I install Adobe flash player, I have to access medical records and most of them need Adobe. I purchased this phone because, I was told it's one of the best. I'm sorry it has a lot missing
-
I'm using 5.2 as my ldap server for naming services. is it possible to nest groups? I have 5 "test" groups and 5 "test" directories, each 770 with the group being test1, test2, test3... test5 If in ldap I'm a member of the group ( attribute is member
-
Why won't elements accept my youtube credentials?
Why won't elements accept my youtube credentials?
-
Can not delete an email that has nothing in the body. The email app exits.
Unable to delete a mail item that has nothing in the body. Delete, move or edit delete causes mail to exit. When re-entering mail, it is still there
-
Hi I created & saved a sales order. I want to check partner determination but determination log is empty. How to check partner determination log? Thanks