DMS for iOS 64 bit arm64

Trying to develop a mobile app on iOS, and enable it to sync with backend oracle 11g database via the database mobile server. However the iOS SDK library provided by Oracle (libosync.a) was complied for armv7 - the 32bit iOS system architecture. But Apple now requires all the new submitted app to be 64bit. To my knowledge, a library complied for armv7- 32bit architecture can not be used on a arm64 iOS system architecture.
My questions are:
1. if I am wrong about the armv7 library not being able to be used on an arm64 system architecture, how can this be done?
2. If/Where can I find/request the libosync.a (Oracle library) which is complied against an arm64 - 64 bit iOS system architecture?
Many thanks

Thanks for bringing this issue to our attention.
1. if I am wrong about the armv7 library not being able to be used on an arm64 system architecture, how can this
be done?
       It is not possible to use a 32 bit library on a 64 bit system.   The 64 bit requirement was announced in late 2014, well
after we had released 11.3 and we after we had frozen the 12.1 release.
2. If/Where can I find/request the libosync.a (Oracle library) which is complied against an arm64 - 64 bit iOS system architecture?
     You are going to need to go through Oracle support and we can provide this to you.    The other option will be to wait until this is addressed
in an official patch release.   Dates for the patch release have not been set yet, so I cannot provide any additional specifics today.   The best option is to file a request
through Oracle support.

Similar Messages

Flash CS 5.5 Professional requires 32-bit JVM when publishing for iOS

When trying to publish my file to AIR for iOS I get the following error:
Error: This Java instance does not support a 32-bit JVM.Please install the desired version.
I'm on Mac OS (Mavericks) and have both java 6 (which supports 32-bit) and 7 (which does not) installed. I've verified I can launch a 32-bit jvm from the terminal with "java -d32".
Interestingly, it publishes to AIR with no problems when it's not to iOS.
How can I get Flash to use the correct version of Java? I've tried setting JAVA_HOME to point to version 6 in /etc/profile with still no luck.
Thanks for reading, I will really appreciate the help!!

Ok, found the answer thanks to Christopher Caleb. Needed to upgraded CS5.5's bundled AIR from 2.6 to the current one, and it compiled with no errors. Directions are here for anyone that winds up having the same issue:
http://www.yeahbutisitflash.com/?p=2949

Can Garageband for iOS record 24bit? (24-bit)

Can garageband for iOS record 24bit? I see other competitors can so wondering if Garageband? Would be a shame
if it can't as of the whole scaling up opening sessions in Logic for further work..
Thanks!

I can't find a defitive support docuemnt from Apple, but as far as I can tell the camera kit can handle 44.1 or 48 kHz 16-bit audio. No evidence of 24-bit support in GB for iOS, either for import or export. Uncompressed audio input files are expected to be in 44.1kHz/16-bit.
tt2

How to address a specific time in VOD for iOS

Using Flash and RTMP it's easy to go to a specific time in a VOD stream served from AMS using the seek method.
Is there similar ability to seek to a specific time in VOD delivered to Safari on iOS? The native video player provides a currentTime method, but I've not seen documentation anywhere to suggest currentTime or another method to provide rapid and accurate time based access from AMS.
FWIW, Wowza documentation provides an answer:
http://www.wowza.com/forums/content.php?326-How-to-specify-a-play-start-time-and-duration- for-HTTP-streaming
TIA,
RT

Nitin, the link you provided is a bit better than nothing, but it refers to the AVPlayer object in applications, rather than iOS delivered data. In our experience currentTime is a settable property for the native video player in mobile Safari, using a normal progressive uploaded stream, as the documentation shows:
http://developer.apple.com/library/safari/#documentation/AudioVideo/Reference/HTMLMediaEle mentClassReference/HTMLMediaElement/HTMLMediaElement.html
The question is "Are there browser based methods that seek AMS delivered streams more quickly or with better accuracy?"
Everyone is aware that mobile is exploding. On some of our videocentric apps the share for iOS is approaching 20%. PM Kevin Towes, what are you doing to accomodate this need???

Get an older version of GarageBand for iOS (pre 2.0.1)?

How do I get an older version of GarageBand for iOS (pre 2.0.1)? Other than this method :
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/app-store -downloading-older-versions-of-apps-ios
I have been all over that article trying to figure this issue out. The problem for me is, my app store, my wife's app store, my friend's app stores, etc. all have updated versions of GarageBand iOS and we have updated iOS to 7. I can't downgrade to iOS 6 any longer. I've asked a friend to trade me his old iPad for my newer one! And on and on to no avail.
Is there a way I can download a pre - 2.0.1 version of GarageBand iOS from a 3rd party? Can the file be placed somewhere and then onto my Mac via iTunes? I have contacted app store support about this. They offered to refund my $4.99, but cannot give me my also purchased (on a different account and updated there as well) old version of GB iOS.
I have a compatibility issue between the latest GB for iOS and Logic Pro 9 on the Mac. LP 9 will not open the latest version of GB iOS. I cannot download LP 10 bc my 2007 MP is 32-bit EFI. I'm not comfortable w/ the hacks for getting Mavericks, etc. as I'm not computer savvy. I'm a songwriter who wants to write and record as simply as possible. My current set-up runs like a tank. GB iOS is great for getting ideas down when on the road. Then I flesh things out on the Mac in LP and add the audio tracks there as well.
Anyone know a workaround for opening GB 2.0.1 iOS in LP9? I don't want the audio BTW, just the MIDI. I can find the audio by show package contents, etc. but I can't see the MIDI info in the folder. Maybe my OSX won't recognize as I could possibly do this manually? When I unpack a pre-2.0.1 GB file on the Mac, I can see both the audio and the MIDI, but not on the new GB ".band" file. Any thoughts or ideas are welcomed. Thank you!
Mac Pro 1,1 June 2007
2x Quad Core 2.66 Ghz Intel Xeon
16 GB RAM
2 HD's
Logic Pro 9.1.8
Snow Leopard 10.6.8

Thank you! Can you please explain? Can I still record in GB iOS and then use the MIDI synth app? Where is the MIDI synth app - on the iPad or Mac? How do I get the MIDI info to the Mac - by iRig MIDI or USB? Please break down the process if you can and I will try it. Looks like great idea, I just need a little more info. Thanks!

In what way is iTunes for 64-bit windows 64-bit?

I keep finding conflicting info on this topic. There appears to be a version of iTunes for 64-bit Windows, but task manager shows itunes.exe as being 32-bit.
In what way is this installer 64-bit? Does it install 64-bit drivers for iOS devices and iTunes, but the program is still 32-bit?

The itunes.exe process itself is 32-bit (on a 64-bit install). Most of the iTunes program files are also 32-bit.
The miniplayer is 64-bit, and there are 64-bit plugins for Outlook. (You'll see those items in the iTunes folder in your "Program files" rather than in the iTunes folder in your "Program files (x86)".)
The GEAR drivers itunes uses for burning will be the 64-bit versions on a 64-bit system.
The iPod service will be 64-bit on a 64-bit system.
Apple Mobile Device Support is 64-bit (so you'll have the 64-bit Apple Mobile Device Service, and usbaapl64.sys and netaapl64.sys rather than usbaapl.sys and netaapl.sys, on the 64-bit system.)
Some of the bonjour componentry on the 64-bit install will be 64-bit.
Most everything else is 32-bit (QuickTime, Apple Software Update, Apple Application Support).
(Apologies for inaccuracies ... it's been a wee while since I checked the noir-household 64-bit Vista box for locations. The precise details of what is 32-bit and 64-bit can change between versions. For example, one of the big changes between the itunes 8.x 64-bit versions and the itunes 9.x 64-bit versions was the iPod Service going 64-bit.)

PDF-3D in Adobe Reader for iOS

When will PDF-3D (viewing of 3D CAD within an PDF file) be available for Acrobat Reader for iOS ?
Thanks for your help
Rainer

Hi Steve,
have you a little bit more background info on your answer for me?
Why shouldn’t I count on it ?
Thanks for a short feedback.
p.s.: Sorry I didn’t find the button to raise this question directly in the forum.
Mit freundlichen Grüßen / Best regards
Rainer Kemmler
DC-IAP/MKT2, -MKT5
Tel. +49-711-811-35556
PC-Fax +49-711-811-50510342
Von: Steve Werner [email protected]
Gesendet: Dienstag, 9. Oktober 2012 04:37
An: Kemmler Rainer (DC-IAP/MKT5 DC-IAP/MKT2)
Betreff: PDF-3D in Adobe Reader for iOS
Re: PDF-3D in Adobe Reader for iOS
created by Steve Werner<http://forums.adobe.com/people/Steve+Werner> in Adobe Reader for iOS - View the full discussion<http://forums.adobe.com/message/4759596#4759596

Why do videos show up in photos and why can't i export them from iPhoto for iOS

Somehow, I just don't get it:
If I take a picture on my iPhone 5s, it is saved to 'Pictues' ... sound reasonable.
If I take a video on the same device, it is saved to 'Pictures' ... that's where it gets messy.
If I receive a video on an app like e.g. WhatsApp ... it also get's stored in ... guess what ... 'Pictures'!
Now that's a little bit confusing.
Generally I would like to keep these different types of media (still pictures vs. moving images) in separate spaces, but it seems like that is not possible out of the box, because if go ahead and tab on that share-button in iOS 7 i get prompted to share the videos to various installed apps like e.g. YouTube, Vimeo, Twitter - you name it.
It seems like there is no way to export videos from 'Pictures' to 'Videos', even if you use iPhoto for iOS in the gap.
The only ways (that I found) to get what I want are way to circumstantial:
Either use iPhoto for the Mac to import videos from the iCloud Photostream to the Mac and from there via "Show in Finder" re-import to iTunes' 'Videos'
or use iExplorer (a third party application for the Mac) and export the videos from the iPhone to a temp-folder and from there re-import with iTunes to 'Videos'.
Why isn't there just a simple share-sheet or export label called 'Export to Videos'.
Why doesn't it just work?
Am I missing out on something?
Is there an easier way to complete this relatively simple task?
Hints and support are very much appreciated!
Kind regards,
Chris

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

Recording with Garageband for IOS

I wanted to share a recording or two using the ipad so that people could see that garageband for IOS doesn't suck. I didn't spend too much time throwing them together, but at the same time they're not too horrible either. They give a pretty decent idea of what a 1st gen ipad with a 5 dollar app is capable of in regards to guitar and shred-type guitar stuff. I'm kind of sick of reading and listening to scathing reviews on how the ipad and Garageband in particular is for non-musicians and noobs who want to sound like they're making music... (ooo that could describe me... yikes!) If I could have had an ipad-like device when I was just getting started, I think that I would be a much better player today. I am totally blown away at the expectations people have of a 5 dollar program, when they haven't spent the time trying to see what it does do well. Anyways, here's hoping that this post helps people out that are trying to find out what the capabilities of an ipad with GB are, especially if they are a guitarist. At the end of the day, it is still the person using the device that either makes it sound horrible, mediocre or amazing...
So anyways, I decided to make a quick track where I didn't spend too much time on the music, and I used only what was in GB in regards to my tones and stuff; That means all stock amp and pedal combinations. I also wanted a track that focused on guitar parts, and making the best of what the app has to offer. I'm sure with some tweaking and mucking around there could be some much cooler tones generated, but hey... it is what it is. Also, I used a Godin LGXT direct into the ipad with an Apogee Jam. Very inexpensive. Bass and drums were recorded with the Line6 Mobile25. The tablet's screen works too, but I find that the keyboard is a lot more accurate, especially for drums. Obviously, you could go into the drum and guitar parts and edit and tweak the parts further, creating drum parts that feel and sound a bit more lifelike, but I didn't do that here; this one was about direct recorded electric guitar...
https://soundcloud.com/jayesskerr/ipadgination
Arguably, you could also record your stuff via microphones also. In this case I used a Roland VS880 as a mixer (It was handy), with 4 CAD microphones connected to it to capture my drum kit. (I'm not much of a drummer, but you get the idea...) I then just lined out of the VS880 into the apogee Jam into the ipad. BANG! This app could work very easily for drummers also... or people who must have their tone and not a digital preset...
https://soundcloud.com/jayesskerr/just-drums
I own a couple of good mac boxes loaded with killer software, and I also have some decent interfaces. They are pretty superior in regards to the amount of options that they present, without a doubt. And then when you include all of the 3rd party plugins and loops and stuff that you can get... well, it's very, very nice. The ipad intrigued me because it's self contained, and is extremely portable. It has limitations which force one to be kind of clever in order to work around them. Also, the recording process with an ipad is very, very quick. Setup time is minimal. So anyways, with just Garageband, and an Apogee Jam (I have the irig connector also, but in my opinion the Jam is so much superior...). The only other thing I'd reccomend is the Line6 Mobilekeys25 which I used here; MUCH easier to enter notes in on bass and drums. Here's some points to sum up my opinions on my experience with the device;
No it's not better than Logic or Cubase or prottols or something with an interface. It's only a 5 dollar app on a 600 dollar tablet (In my case an outdated 1st generation ipad).
There's only 8 tracks, but you can bounce and merge.
The amount of sections is limited, but you can work around that too...
It's extremely portable. Way less gear to haul and set up, but feel free to use your own stuff with it also...
GB on a tablet is very, very easy to learn. Super intuitive and quick to use.
The amount of sections is limited, but again you could always just make another song project and then stitch it together later...
The amp and pedal emulations aren't as good as Guitar Rig, a line6 Pod Pro hd, or a FAS Axe-FXII. But they aren't horrible, they are certainly pretty good for the price of 5 bucks...
If you're broke/poor and want to get into recording and sharing your music, this is the ideal way to go about it. Your recording device (The ipad) also makes documents, does email, takes and edits pictures, takes and edits video... The only thing standing in the way of you sounding great is you...
The 'merge track' option is a powerful tool, especially on your midi tracks.
No pitch correction. Waaaaaahhh boo hoo! You're gonna have to learn how to sing. Plus, it's only 5 bucks!
Don't want to use the internal drum sounds? Or want to use your amp's miced sound? Get a small mixer, and connect your mic to that. Then connect the mic to the Apogee Jam (There are other products out there that work better and in stereo, but this would do in a pinch) and you should be good to go.
I recommend using a small keyboard like the Line6 Mobile Keys 25 to enter your midi/virtual instruments stuff in. For me, using just the pad means more track editing after I enter it...
The last point is this; there's other software besides just GB. Cubasis anyone?
Anyways, thanks for checking this out, I hope that it helps, and if anyone else has any opposing viewpoints or points to add, please do.
http://www.guitarius.net
http://www.youtube.com/user/Scottulus

Yes, I do it all the time. The best I have found is the Apogee iMiC. Here is a link. http://www.apogeedigital.com/products/mic.php

HT4559 How do I get a list of the 200 new features for iOS 5

How do I get lists of the apparent 200 new features of iOS 5 for some reason I cannot find any in support on this website or anywhere!
Also I want a description of what each feature does. Mainly in safari but I'm getting a bit suspicious if any of the features exist. We pay our money there needs to be a list of what we get.

You mean for iOS 6 that was recently announced and won't be released until this fall?
If so, iOS updates are free - you won't be paying anything for it, and the same for iOS 5.
Apple has provided some of the new features included with iOS 6, but not list of all since iOS 6 has not been released yet. Some of the features included with the current iOS 6 BETA version may be removed or changed.

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
Thanks!

It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument. See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
Move a region
Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
Paste a region
You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
Move the playhead to the point where you want the region to start.
Tap the header of the track where you want to paste the region to select the track.
Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Request for iOS

Hi there,
I am new in this forum, and posting here as I haven't seen any other way to send requests for future releases.
I am quite sad to see there is no forum dedicated to iOS, as my post is related to it.
Firstable, want to say I have been quite happy with Apple products so far, in my opinion very high quality hardware.
It hasn't always been the same for iOS, but it definitely has changed and improved a lot with latest updates.
There are still some things that need improvement in order to become a bit more user friendly, and here goes one, very important for me:
I would appreciate some folder, same style as the 'fotos' folder, where you can download or transfer, and possibly view, all kind of documents (pdf, doc, xls, etc...).
And that those documents could be later sent attached to a mail, using 'mail', or other third party mail application (example mBox mail).
I know there are applications like goodreader with which you can do that, but it would be nice to have a default iOS function for that (to download & send documents). Same thing that you can do with mac OS.
I am honestly missing as well, like many users, flashplayer, to see some websites that need it to be installed.
Thank you and happy year 2011 to everybody!

There is no forum specifically for iOS since there's no single version. It's a bit different on each device. Posting in the device forum is the best way to get assistance.
For providing suggestions to Apple, use their feedback page:
http://www.apple.com/feedback/ipad.html
I would appreciate some folder, same style as the 'fotos' folder, where you can download or transfer, and possibly view, all kind of documents (pdf, doc, xls, etc...).
There are many third-party utilities that provide this sort of functionality, including the ability to email a file. Dropbox is one I use and it works quite well. You might want to look into some of those.
Regards.

Native Mobclix Extension for iOS and Android

I'd like to announce to everyone that my Mobclix ANE for both iOS and Android is now available.
You can view the API, supported events, and download a full functioning demo from http://www.airextensions.com or directly by clicking http://bit.ly/mobclixANE
Support iOS 4.3 and greater, support for iPad ad sizes, receive event callback on all Mobclix events in actionscript, AdMob and iAd support for iOS, same API for both iOS and Android, support device rotation and more.
Hope you like it.
Mark Andrade
Sputnik Games

Well nothing prevent you from mixing flascc with native extension.
Also, I think that you can also use domain memory in AS3 with the Bytearray class (not sure about that).
Flascc vs normal as3 is mostly a question of language (portability) Do you want to write as3 or c++?
Native extension give you speed and native platform access(platform specific feature).
So, you should think about it this way:
AS3, run in flash and air. Is sandboxed. Can use domain memory, but it's a bit harder to leverage than flascc.
Flascc, run in flash and air. Is sandboxed, Can use domain memory. Give you the potential of leveraging the hundreds of opensources lib already out there.
Native extension, run ONLY in air. Is not sandboxed. Native memory management. Also let you leverage the c++ lib.
The best (in my opinion) is to write native code for mobile and desktop (no air or flascc involve) and use flascc for the flash/web platform. It's harder, because you have write portable native code (lots of abstraction), but you mostly have the same problem with native extension.

64bit AIR Native Extension for iOS

Hello,
I created a native extension to support ARM64 for iOS. The problem is I get the following error when packaging an ad-hoc build:
"Error: libgameCenter.a are required to have universal iOS libraries. Please contact the ANE developer(s) to get the same."
As I understand I need both armv7 and arm64 libraries. So I build for both of them using "xcodebuild" and then merge with "lipo -create" command.
However I think there is a step I'm missing. Please advice. Thank you.
AIR SDK: 16.0 beta
Xcode: 6.1.1

Well the change you need to do is inside your Xcode project, under Build Settings -> Architectures , make sure that you have selected "Standard Architectures (armv7, arm64)". One last thing to ensure that Valid Architectures should also contain arm64 entry along with other armv7 entries.

DMS for iOS 64 bit arm64

Similar Messages

Maybe you are looking for