DMS integration with PP and PS.

Hi SAP PLM experts,
I would like to know how mySAP PLM's DMS module is integrated with PS and PP module.
Any small scenario with T codes and configuration help is highly appriciated.
If you guyz have any documents/materials for this question, please mail the same to sudhu03 at gmail dot com.
Thanks in advance,
S.Achar.

It is only through the object linkwhich you provide.
In the business perpective, we attach the contract documents, design drawings and other doucuments to the project for ready referance.
You can create the DIR directly from PS transaction or you can create it in DMS and attach it to the Project.
We do have the red lining to identify teh changes reqd in the document.

Similar Messages

DMS-integration with CS01 and MM01

Hello,
I have a requirement here as follows.
1) i have created a material document in CV01N
2) I have attached the same document in MM01 while creating the Material
3) in CS01 while attaching the material to the line item it is receiving the material in the Material TAB but the document is not reflecting in the document TAB.
4) the documents in the document TAB have to be entered manually, while both the inputs in the material TAB and the document TAB are being diaplayed on the General TAB
I require a solution that the as soon as the material is entered in the material TAB the document corresponding to the material has to reflect in the document TAB.
Please suggest a solution if anyone has come across the relevant scenario and have resolved it.
regards

Hii Deepak,
Thanks for your response
but we are able to view the document that is created in CV01N and that which is attached to the material in the material master (MM01) in CS03.
In CS03 the material(BOM) that is keyed in as a line item with the attached document can be seen when the line item is clicked. But in the document TAB in the CS03 the document that is attached to the material is not displayed automatically.
The relevant document has to be entered manually.
But both can be displayed in the general TAB after entering manually.
I believe there is a BADI enhancement to meet the above requirement.
Please suggest about the enhancement as i am not so good at BADI
Please also suggest an alternative approach, if anyone has solved the situation like above.

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

Hi OHPCPaT Forum,
Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
Thanks in anticipation

Hi,
Yes all the users are facing the issue. Please find more details for the issue.
Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
Quality Center Details:
HP Application Lifecycle Management 11.00
ALM patch level: 07
Quality Center 11.00 Enterprise Edition
Component     Build
OTA Client     11.0.0.6051
User Interface     11.0.0.6051
WebGate Client     11.0.0.6051
Test Run Scheduler     11.0.0.6051
Execution Flow     11.0.0.6051
Site Administration Client     11.0.0.6051
Extension Version
Enterprise Integration for SAP applications     2.6.0.3232
Sprinter     11.0.0.6051
Application Model     2.6.0.917
Installation Steps followed:-
1.Installed HP ALM
2.Installed Patch Service Pack 2 (Patch 2,3,4)
3.Installed Patch 6
4.Installed Patch 7
5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
6.Created new project in HP ALM
7.Login to the project (no issue)
8.Enabled the Project Extensions
9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

Exchange 2013 owa integration with ADFS and cooexistance with exchange 2007

Team,
I have successfully integrated adfs 3.0 and Exchange 2013 owa and ecp. However, we have a coexistence environment with exchange 2007. When you access owa, which then redirects you to adfs, sign-in, and then get redirected back to owa. If your
mailbox is still within exchange 2007, you get a blank login page. If you mailbox is in exchange 2013 then you successfully get the owa page for 2013. The problem is that all exchange 2007 mailbox users get blank pages at login. So I have determined
that exchange 2013 cas is not doing the service location lookup on the mailbox to determine if a redirect to the legacy owa address is needed. Is there a configuration setting that I might be missing? Or does the integration with adfs and owa not support
the much needed mailbox lookup for a coexistance environment? A side note: if we enable FBA with owa, both login scenarios work just fine (legacy and new 2013). The legacy namespace has been created, and applied to the exchange 2007 urls.

Hi,
Try using AD FS claims-based authentication with Outlook Web App and EAC
http://technet.microsoft.com/en-us/library/dn635116(v=exchg.150).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

SAP -DMS Integration with MS-Outlook

How it will possible to attach originals in DMS to Ms-Outlook. (Just Click on originals and send it to email directly without checkig out and saving that on local drive).we have SAP ECC- 6.0

Hi,
Install EasyDMS software available freely from sap market place. It is MS explorer integration with sap. After creating document record in it, just select the file which you can send it to MS Outllook as similar as you do to send file from MS explorer to MS outlook.
Anirudh,

Excel integration with Entry and Approval for SSM not working

Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
-          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
-          The browser security is definitely set to accept all active X scripts
-          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
-          Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!

Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob

SocialMiner Integration with Linkden and Whatsapp

Hi Everybody,
One of my customers wants to integrate Cisco SocialMiner with Linkden and Whatsapp but I did not find integration information in product guides. One of my team members told me that we can achieve Linkden integration through REST APIs, but I am still doubtful because it was not mentioned anywhere in the documents. So please guide me, how can we achieve it.Thanks in advance
Cheers :)
Regards
Qamar Khan

I had the client implement a DMZ and have part of the public IP block be assigned to the it. We then placed the SocialMiner server in the DMZ and only opened the necessary ports from the OUTSIDE to DMZ and from the DMZ to the INSIDE. PDI said that doing NAT to the SocialMiner server is not currently supported. Also, we are doing this without setting up the optional proxy server.

JSF integration with Webwork and Freemarker ?

My company is investing a lot in an application that uses Webwork and Freemarker. I'd like to reuse chunks of that but with JSF components for new development. I know it's possible to link to and from external URLs using JSF's navigation, but I don't think that buys me much in this case. Is it possible to use the JSF View (as in Model-View-Controller) with someone else's (Webwork's) front controller? I'm guessing JSF can coexist with Freemarker as it does with JSP and HTML. Or, does anyone know of any successful approach to Webwork integration anywhere?
thx!

My company is investing a lot in an application that uses Webwork and Freemarker. I'd like to reuse chunks of that but with JSF components for new development. I know it's possible to link to and from external URLs using JSF's navigation, but I don't think that buys me much in this case. Is it possible to use the JSF View (as in Model-View-Controller) with someone else's (Webwork's) front controller? I'm guessing JSF can coexist with Freemarker as it does with JSP and HTML. Or, does anyone know of any successful approach to Webwork integration anywhere?
thx!

Integration with IP and other 3rd party procurement apps

I don't know about the rest of you, but one of the primary hurdles that we have to get past with target customers is that most of the big ones already have procurement systems that produce POs. Ideally, they'd like to post those POs as either an RFQ/Auction or directly as a PO for a particular supplier. This is particularly true for big manufacturers who initially want to bring their OEM suppliers and contract manufacturers into an on-line procurement environment and then expand that to auctions and RFQs later. The scenario refers primarily to those trading partners that do not have their own back-end systems and EAI solutions.
We think we have come up with a workaround by taking the EDI produced out of the buyer's system into our Hub, transforming it into our cannonical form, then turning the data into an OEX OAG XML auction document, uploading it through a dummy account for that buyer, once the bid is placed by the supplier, automatically accepting, and generating a final PO as a PO Akn back to the buyer's system. It is a little hokey, but it is the best we've been able come up with. (Of course, once the PO message from the buyer's system is sent, the buyer wants nothing to do with it after that. They just want to receive a PO Akn back).
Any ideas?
David Luper
[email protected]
415-325-5028

David,
It sounds like you are hitting on two of our critical issues. Specifically, our issues are the following:
1. We have customers with existing procurement systems containing requisitioning/workflow/approval functionality. They want to continue using this functionality while using our Exchange for sourcing/bidding/tabulation/etc. This gives us the requirement for integration to these procurement systems (iP, SAP, Peoplesoft, etc). We need the ability to load to the Exchange all the parameters for an Auction (open date, close date, type of auction, etc), line items, and potentially even suppliers. We envision that this document load generated from the requisition system could even be flagged to open the auction immediately without the buyer ever having to go to the Exchange. The buyer would then go to the Exchange to see bids and to do the award process. Once the bid was awarded, this would generate a document back to the requisition system for issuance of a PO by the procurement system.
Our second issue is the ability to simply issue a manual PO. This could be done within the Exchange and/or a procurement system. Right now we are missing significant transaction volume due to the inability for a buyer to go issue a direct PO to a vendor on the Exchange without going through the auction or catalog process. If the goods the buyer wants to buy are under their threshold for required bidding and are not in the catalog, they go around the Exchange with a paper PO. This eliminates all the benefits of integration and our chance to charge for this transaction
Both of these issues are extremely critical for us. Dee, what can you tell us about the integration capabilities with procurement/requisition systems or the manual PO functionality? We have heard multiple conflicting reports about the availability of integration with iP.
Thanks!
John Alexander
Way2Bid
[EMAIL][email protected][EMAIL]
417.447.5042 (Voice)

ESS-portal integration with Time and Travel management(HR) in R/3

Hi,
Im doing with ESS-portal configuration with Time and Travel Management in R/3,So please kindly send me Documents for integration part.I'll b so thankful if u people send me docu as soon as possible.
send me documents to [email protected]
thanks
pavi

Hi
Please go through this functional module HRMS_BIW_EXTRACT_PY1 in r/3 side to know the exact table where u r getting the data.
There are lot of tables involved in HR-payroll info types.
As far as your problem is concerned you take one employee and go to PA20 and analyse the payroll for each week or twice a month (depends up on ur client)
run the report on the payroll cube and find out exactly what u want.
Thanks
Roopa
Assign points if help full

Portal integration with workflow and contracts

gurus,
are there any whitepapers on the integration of the portal with oracle workflow and oracle contracts.
it would be great help ...
has anyone done this before ...?
pls reply ...
thanx a bunch ...

reposted for attention ...
has anyone done this ??
oracle contracts integrated with oracle portal ...

Performance problem with Integration with COGNOS and Bex

Hi Gems
I have a performance problem with some of my queries when integrating with the COGNOS
My query is simple which gets the data for the date interval : "
From Date: 20070101
To date:20070829
When executing the query in the Bex it takes 2mins but when it is executed in the COGNOS it takes almost 10mins and above..
Any where can we debug the report how the data is sending to the cognos. Like debugging the OLEDB ..
and how to increase the performance.. of the query in the Cognos ..
Thanks in Advance
Regards
AK

Hi,
Please check the following CA Unicenter config files on the SunMC server:
- is the Event Adapter (ea-start) running ?, without these daemon no event forwarding is done the CA Unicenter nor discover from Ca unicenter is working.
How to debug:
- run ea-start in debug mode:
# /opt/SUNWsymon/SunMC-TNG/sbin/ea-start -d9
- check if the Event Adaptor is been setup,
# /var/opt/SUNWsymon/SunMC-TNG/cfg_sunmctotng
- check the CA log file
# /var/opt/SUNWsymon/SunMC-TNG/SunMCToTngAdaptorMain.log
After that is all fine check this side it explains how to discover an SunMC agent from CA Unicenter.
http://docs.sun.com/app/docs/doc/817-1101/6mgrtmkao?a=view#tngtrouble-6
Kind Regards

Integration with Hyperion and OBIEE

Hi All,
I am planning to integrate Hyperion Workspace and shared Services with OBIEE.
The Environment is windows server 2008 R2 64 bit OS, Hyperion 11.1.2.3 64 bit, Obiee 11.1.1.7 64bit and Database is Oracle Database 11g Release 2 (11.2.0.1.0) - 64bit.
We are planning to installing EPM System on the same machine on which Oracle BI EE or BI Publisher are installed, Can i install two different Middleware homes ? are Can i install Single Middleware?
Which product i nead to install first?( I am planning to install Hyperion first then configure it after i am planning to install and configure obiee is it correct process)
After the install and configuration of both the hyperion and obiee products i nead to configure any extra activities for integration hyperion (workspace and shared services)with obiee?

Hi,
It is mentioned in Jon's blog entry, you must edit the HSSRegistration.bat file.
Near the top add:
set ORACLE_BI_HOME=E:\Oracle\Middleware\Oracle_BI1
set ORACLE_HOME=E:\Oracle\Middleware\Oracle_BI1
set JAVA_HOME=E:\Oracle\Middleware\Oracle_BI1\jdk
Editing for your environment as appropriate.
-Dan

Integration with Radware and timesten

Hi
As per my understanding , Timesten or IMDB Cache can be connected through DSN by any external client. Want to know whether Radware can be integrated with
Timesten or IMDB Cache.
Regards
Siva Kumar

TimesTen supports industry standard APIs such as ODBC (2.5), JDBC and OCI. If 'Radware' (whatever that is) can communicate using one of those APIs then it may be able to work with TimesTen / IMDB Cache. This is really a question for the vendor of Radware. They would have to test and certify this not Oracle.
Chris

DMS integration with PP and PS.

Similar Messages

Maybe you are looking for