DMS Server with File server

Hi,
I have installed DMS, Content server and using KPRO.
I need that when I check in my files, It may go to file server instead of Content server or R3 database.
What all configurations need to made? Can you please guie me step by step, or if you have any document kindly inform me.
Regards,
Manish Sharma

Hi Christoph,
Thanks for replying, But I am really not able to understand.
When I try "check in" documents in vault, it works perfectly fine.
When I try to "Check In" Docs in R3 database, it wors perfectly fine.
But when I check kpro, I get errors while creating repository in CSADMIN, i get Microsoft ODBC Drivers error. Moreover where I have to define path of the fileserver where my files will be stored. Can you please provide me some procedure where I can get step by step information for configuration.
Kindly help me. Witing for your reply.
Regards,
Manish Sharma

Similar Messages

How to use quota on a desktop folder for all users with File Server Resource Manager.

Hi there,
I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
The path I'd like to use is d:\home\%username%\desktop.
Like to hear from you all if there is a solution or workaround for this one :)
Thanks for your time.
Ben.
Ben van der Meer

That's a question about Automator, so I'd pop that one here
http://discussions.apple.com/forum.jspa?forumID=1339
Regards
TD

How to use webmail address book on Mac Mini Server with Lion Server.

I have a Mac Mini Server with Lion Server installed; the webmail is setup and working but I can not get the address book to work.
I have followed an instruction from this website on how to activate the address book icon in webmail but can not add any addresses. Is there something that needs to be activatied before it will work?

No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

Error while Integrating Experience Server with Document Server

Hi All ,
I am following tutorial http://help.adobe.com/en_US/enterpriseplatform/10.0/InstallDEP/adep_install_experience_ser vices.pdf
Following step resulted into error
6.1 Integrate Experience Server with Document Server
http://<host>:<port> and click OSGi Console.
Log in using admin/admin as the username/password > Click the Document Services Settings tab. ... click Configure.
Please help
Thanks
YogLC
Error occurred while performing last Command [CreateLCAdminUserCommand]
chainedException: com.adobe.idp.um.api.UMException| [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient] errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCException is Null or NOT An Instance of UMException chainedException:ALC-DSC-020-000: com.adobe.idp.dsc.InvalidStateException: Service: DirectoryManagerService is not in a RUNNING statechainedExceptionMessage:Service: DirectoryManagerService is not in a RUNNING state chainedException trace:ALC-DSC-020-000: com.adobe.idp.dsc.InvalidStateException: Service: DirectoryManagerService is not in a RUNNING state at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:35) at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60) at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188) at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60) at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48) at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60) at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121) at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:131) at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:329) at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:139) at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81) at sun.reflect.GeneratedMethodAccessor459.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397) at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186) at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454) at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281) at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:86) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:179) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java: 157) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:580) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:662)

Looks like there is some issue on the Docuement Server side. Can you provide logs from the Document Server

How to connect message server with application server?

How to connect message server with application server?

Hello Damodar,
The connection is established at the time of installation only !!. At the time of installation you need to specify the Central Instance(message server in most cases unless you have a dedicated message-enque server).
Regards.
Ruchit.

Integrate On-Premises Exchange Server With Windows Server Essentials

I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!

Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu

TS1843 PowerMac G4 having issues with file server

My dad has 2 computers one is an old apple PowerMac G4 running mac OS 9.2 and the other is an Mac Mini running Mac OS X,
Recently I updated the Internet connectivity in the house by adding some routers. On all routers is the DHCP disable except on the main router (which is directly connected to the other routers). this works great for all computers/tablets/phones/...
Except the inner connection between those 2 doesn't work any more, but for being able to anything on the G4 you have to login on the file server of the mac mini. but I always get an error that he can't connect to the server (or similar, this error is in Dutch).
they used to be connected via a hub which was connected to the main router (even installing that one back doesn't work anymore), they do have the same IP as they had before the upgrade.
When I do an IP swipe, or check the connected devices(on any router). the G4 isn't connected, but the light on the router is flickering (although the light on the router is not fully on). I got a couple of times that the G4 showed up in the list, I could ping it, but still I wasn't able to login.
I think there is a possibility that the IP that it currently has is conflicting with an other device on the network, the main router is provided by my ISP and they say you can't use the 192.168.x.100 IP, but the g4 uses that one. (so if I would be able to change it before launch, that would be a way to cancel out that problem)
I tried just having those 2 computers in a network disabled from all the rest, with the DHCP enabled on the router, but still no connectivity.
I'm completely out of ideas on how to fix this.
greetings Glenn

What software is the file server running? If it is a Mac OS X server, the forum for that is here.

DMS link with content server

Hi All,
Plz let me know that how the DIR is getting path of content server where it needs to get saved.
Means i want to know that where we have to put the path of Content server into the system(SPRO) .I found some place to put the same in "Define Data Carrier" but still i am not getting that how the DIR if finding that particular path..how it is linked as we put only Storege category during CV01N not datacarrier anywhere.
Thanks & Regards,

Hi,
Content servers are used to save large quantities of documents, either within SAP Media on the SAP database, or in an external system via an SAP-certified interface. The Document Modeling Workbench in SAP Media is structured so that one document class (for example, a physical storage place) is available for each business object. A content server therefore contains one memory space for every business object. In SAP Media Systems, documents are stored in the SAP Media database or on an external content server.
Using Content Server with database storage gives you a very stable, secure and fast environment. You can store documents in R/3 as well, but that is really only a good solution for few documents.
Additional information is available in the SAP Library under SAP R/3 and R/3 Enterprise ® SAP R/3 Enterprise Release 4.70 ® SAP SAP NetWeaver Components ® SAP Web Application Server ® Basis Services/Communication Interface (BC-SRV) ® ArchiveLink (BC-SRV-ARL) and Knowledge Provider (BC-SRV-KPR).
You can also check the document available on KPro
http://help.sap.com/saphelp_erp2005/helpdata/en/15/aea9375d79fb7de10000009b38f8cf/frameset.htm
KPro is mainly used to store and retrive content from Content Server.
Also check this link for KM,
http://help.sap.com/saphelp_erp2005/helpdata/en/42/d289ba46076bb2e10000000a1553f6/frameset.htm
Hope this helps.
Regards,
MRK
(reward points if useful)

Hyper-V 2012 High Availability using Windows Server 2012 File Server Storage

Hi Guys,
Need your expertise regarding hyper-v high availability. We setup 2 hyper-v 2012 host in our infra for our domain consolidation project. Unfortunately, we don't have hardware storage that is said to be a requirement that we can use to create a failover cluster
for hyper-v host to implement HA. Here's the setup:
Host1
HP Proliant L380 G7
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Host2
Dell PowerEdge 2950
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Storage
Dell PowerEdge 6800
Windows Server 2012 Std
File and Storage Services installed
I'm able to configure the new feature about Shared Nothing Live Migration - i'm able to move VM's back and fort between my hosts without storage. But this is planned and proactive approach. My concern is to have my hyper-v host to become highly available in
the event of system failure. If my host1 dies, the VMs should go/move to host2 and vice versa. In setting this up, i believe i need to enable the failover clustering between my hyper-v hosts which i already did but upon validation, it says "No disks
were found on which to perform cluster validation tests." Is it possible to cluster it using just a regular windows file server? I've read about SMB 3.0 and i've configured it as well i'm able to save VMs on my file server, but i don't think that my hyper-v
hosts are already highly available.
Any feedback and suggestions or recommendation is highly appreciated. Thanks in advance!

Hi Guys,
Need your expertise regarding hyper-v high availability. We setup 2 hyper-v 2012 host in our infra for our domain consolidation project. Unfortunately, we don't have hardware storage that is said to be a requirement that we can use to create a failover cluster
for hyper-v host to implement HA. Here's the setup:
Host1
HP Proliant L380 G7
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Host2
Dell PowerEdge 2950
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Storage
Dell PowerEdge 6800
Windows Server 2012 Std
File and Storage Services installed
I'm able to configure the new feature about Shared Nothing Live Migration - i'm able to move VM's back and fort between my hosts without storage. But this is planned and proactive approach. My concern is to have my hyper-v host to become highly available in
the event of system failure. If my host1 dies, the VMs should go/move to host2 and vice versa. In setting this up, i believe i need to enable the failover clustering between my hyper-v hosts which i already did but upon validation, it says "No disks were
found on which to perform cluster validation tests." Is it possible to cluster it using just a regular windows file server? I've read about SMB 3.0 and i've configured it as well i'm able to save VMs on my file server, but i don't think that my hyper-v hosts
are already highly available.
Any feedback and suggestions or recommendation is highly appreciated. Thanks in advance!
Your shared storage is a single point of failure with this scenario so I would not consider the whole setup as a production configuration... Also setup is both slow (all I/O is travelling down the wire to storage server, running VMs from DAS is ages faster)
and expensive (third server + extra Windows license). I would think twice about what you do and either deploy a built-in VM replication technologies (Hyper-V Replica) and apps built-in clustering features that does not require shared storage (SQL Server and
Database Mirroring for example, BTW what workload do you run?) or use some third-party software creating fault tolerant shared storage from DAS or investing into physical shared storage hardware (HA one of course).
Hi VR38DETT,
Thanks for responding. The hosts will cater a domain controller (on each host), Web filtering software (Websense), Anti-Virus (McAfee ePO), WSUS and an Auditserver as of the moment. Is the Hyper-V Replica somewhat give "high availability" to VMs or Hyper-V
hosts? Also, is the cluster required in order to implement it? Haven't tried that but worth a try.

Server 2012 File Server Cluster Shadow Copies Disappear Some Time After Failover

Hello,
I've seen similar questions posted on here before however I have yet to find a solution that worked for us so I'm adding my process in hopes someone can point out where I went wrong.
The problem: After failover, shadow copies are only available for a short time on the secondary server. Before the task to create new shadow copies happens the shadow copies are deleted. Failing back shows them missing on the primary server as
well when this happens.
We have a 2 node (hereafter server1 and server2) cluster with a quorum disk. There are 8 disk resources which are mapped to the cluster via iScsi. 4 of these disks are setup as storage and the other 4 are currently set up as shadow copy volumes
for their respective storage volume.
Previously we weren't using separate shadow copy volumes and seeing the same issue described in the topic title. I followed two other topics on here that seemed close and then setup the separate shadow copy volumes however it has yet to alleviate the
issue. These are the two other topics :
Topic 1: https://social.technet.microsoft.com/Forums/windowsserver/en-US/ba0d2568-53ac-4523-a49e-4e453d14627f/failover-cluster-server-file-server-role-is-clustered-shadow-copies-do-not-seem-to-travel-to?forum=winserverClustering
Topic 2: https://social.technet.microsoft.com/Forums/windowsserver/en-US/c884c31b-a50e-4c9d-96f3-119e347a61e8/shadow-copies-missing-after-failover-on-2008-r2-cluster
After reading both of those topics I did the following:
1) Add the 4 new volumes to the cluster for shadow copies
2) Made each storage volume dependent on it's shadow copy volume in FCM
3) Went to the currently active node directly and opened up "My Computer", I then went to the properties of each storage volume and set up shadow copies to go to the respective shadow copy volume drive letter with correct size for spacing, etc.
4) I then went back to FCM and right clicked on the corresponding storage volume and choose "Configure Shadow Copy" and set the schedule for 12:00 noon and 5:00 PM.
5) I noticed that on the nodes the task was created and that the task would failover between the nodes and appeared correct.
6) Everything appears to failover correctly, all volumes come up, drive letters are same, shadow copy storage settings are the same, and 4 scheduled tasks for shadow copy appear on the current node after failover.
Thinking everything was setup according to best practice I did some testing by changing file contents throughout the day making sure that previous versions were created as scheduled on server1. I then rebooted Server1 to simulate failure. Server2
picked up the role within about 10 seconds and files were avaiable. I checked and I could still see previous versions for the files after failover that were created on server1. Unfortunately that didn't last as the next day before noon I was going
to make more changes to files to ensure that not only could we see the shadow copies that were created when Server1 owned the file server role but also that the copies created on Server2 would be seen on failback. I was disappointed to discover that
the shadow copies were all gone and failing back didn't produce them either.
Does anyone have any insight into this issue? I must be missing a switch somewhere or perhaps this isn't even possible with our cluster type based on this: http://technet.microsoft.com/en-us/library/cc779378%28v=ws.10%29.aspx
Now here's an interesting part, shadow copies on 1 of our 4 volumes have been retained from both nodes through the testing, but I can't figure out what makes it different though I do suspect that perhaps the "Disk#s" in computer management / disk
management perhaps need to be the same between servers? For example, on server 1 the disk #s for cluster volume 1 might be "Disk4" but on server 2 the same volume might be called "Disk7", however I think that operations like this
and shadow copy are based on the disk GUID and perhaps this shouldn't matter.
Edit, checked on the disk numbers, I see no correlation between what I'm seeing in shadow copy and what is happening to the numbers. All other items, quotas, etc fail and work correctly despite these diffs:
Disk Numbers on Server 1:
Format: "shadow/storerelation volume = Disk Number"
aHome storage1 = 16
aShared storage2 = 09
sHome storage3 = 01
sShared storage4 = 04
aHome shadow1 = 10
aShared shadow2 = 11
sHome shadow3 = 02
sShared shadow4 = 05
Disk numbers on Server 2:
aHome storage1 = 16 (SAME)
aShared storage2 = 04 (DIFF)
sHome storage3 = 05 (DIFF)
sShared storage4 = 08 (DIFF)
aHome shadow1 = 10 (SAME)
aShared shadow2 = 11 (SAME)
sHome shadow3 = 06 (DIFF)
sShared shadow4 = 09 (DIFF)
Thanks in advance for your assistance/guidance on this matter!

Hello Alex,
Thank you for your reply. I will go through your questions in order as best I can, though I'm not the backup expert here.
1) "Did you see any event ID when the VSS fail?
please offer us more information about your environment, such as what type backup you are using the soft ware based or hard ware VSS device."
I saw a number of events on inspection. Interestingly enough, the event ID 60 issues did not occur on the drive where shadow copies did remain after the two reboots. I'm putting my event notes in a code block to try to preserve formatting/readability.
I've written down events from both server 1 and 2 in this code block, documenting the first reboot causing the role to move to server 2 and then the second reboot going back to server 1:
JANUARY 2
9:34:20 PM - Server 1 - Event ID: 1074 - INFO - Source: User 32 - Standard reboot request from explorer.exe (Initiated by me)
9:34:21 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the running state."
9:34:21 PM - Server 1 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy49
F:
T:
The locale specific resource for the desired message is not present"
9:34:21 PM - Server 1 - Event ID 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy1
H:
V:
The locale specific resource for the desired message is not present"
***The above event repeats with only the number changing, drive letters stay same, citing VolumeShadowCopy# numbers 6, 13, 18, 22, 27, 32, 38, 41, 45, 51,
9:34:21 PM - Server 1 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy4
E:
S:
The locale specific resource for the desired message is not present"
***The above event repeats with only the number changing, drive letters stay same, citing VolumeShadowCopy# numbers 5, 10, 19, 21, 25, 29, 37, 40, 46, 48, 48
9:34:28 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Legacy Network Service service entered the stopped state."
9:34:28 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the stopped state.""
9:34:29 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Client Service service entered the stopped state."
9:34:30 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Discovery Framework service entered the stopped state."
10:44:07 PM - Server 2 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the running state."
10:44:08 PM - Server 2 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Microsoft Software Shadow Copy Provider service entered the running state."
10:45:01 PM - Server 2 - Event ID: 48 - ERROR - Source: bxois - "Target failed to respond in time to a NOP request."
10:45:01 PM - Server 2 - Event ID: 20 - ERROR - Source: bxois - "Connection to the target was lost. The initiator will attempt to retry the connection."
10:45:01 PM - Server 2 - Event ID: 153 - WARN - Source: disk - "The IO operation at logical block address 0x146d2c580 for Disk 7 was retried."
10:45:03 PM - Server 2 - Event ID: 34 - INFO - Source: bxois - "A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data contains the target name."
JANUARY 3
At around 2:30 I reboot Server 2, seeing that shadow copy was missing after previous failure. Here are the relevant events from the flip back to server 1.
2:30:34 PM - Server 2 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy24
F:
T:
The locale specific resource for the desired message is not present"
2:30:34 PM - Server 2 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy23
E:
S:
The locale specific resource for the desired message is not present"
We are using Symantec NetBackup. The client agent is installed on both server1 and 2. We're backing them up based on the complete drive letter for each storage volume (this makes recovery easier). I believe this is what you would call "software
based VSS". We don't have the infrastructure/setup to do hardware based snapshots. The drives reside on a compellent san mapped to the cluster via iScsi.
2) "Confirm the following registry is exist:
- HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VSS\Settings"
The key is there, however the DWORD value is not, would that mean that the
default value is being used at this point?

Integrating calendar server with messaging server

hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"

Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha

Check-out originals from Content Server to File server?

Hello Experts,
We have urgent requirement to check-out huge number of originals from the Content server and send to an application server (ftp server).
The input data that we can use to fetch the originals are PHOIO nunber or LOIO or Original File name.
I tested below function module but they does not seem to meet our requirements.
BAPI_DOCUMENT_CHECKOUTVIEW2 - Originals are checked-out to C:\Temp\
CV120_KPRO_CHECKOUT_TO_SERVER
CV120_KPRO_CHECKOUT_TO_TABLE
SDOK_PHIO_LOAD_CONTENT - here the content is written to table in binary mode.
CV120_DOC_GET_FILE
Also i tested program - DMS_KPRO_READ. In this case, manual action is required to select the path in front end where the originals needs to be checked-out.
Please help if you have suitable solutions.
Thanks!
sandeep

Hello Sandeep,
You can use "DMS_KPRO_READ" report to achive your purpose. In this report you will get PHIO ID & LOIO ID. with these ID's you will get originals path to download the files uploaded on content server to application server or FTP server.
Use F_BROWSE function to select all files in foreground/background to downlaod it on desktop. I have implement in my project & it is working fine till date.
Thanks
Pravin

Connecting BI Web Server with SQL Server Express / Visual Studio Express for Report Development

Hi,
My company is using the Report Builder 3.0 to build the BI Reports ( I guess based on SQL Server 2008 R2). Our software vendor has provided us the web URL to access the BI Server. I want to generate the BI Reports with SQL Server Express or Visual
Studio Express instead of Report Builder 3.0. Need some guidance in this regard.
regards, BI.Developer.

Hi,
Based on my research, if we want to open the report from report server to Business Intelligence Development Studio, we should download the report from report manager, then add this item in Business Intelligence Development Studio. For more details, please
see the following steps:
Type the URL in IE browser to access the repot manager.
Browse to the RDL file folder or location.
Hover over the report, and click the drop-down arrow near the RDL file.
Click on download button, the download window will pop up now. Then save the rdl file.
Click Manage option in the drop-down list, make a note of its Data Source Connection string.
Create a Report Server Project in Business Intelligence Development Studio.
Right-click the Reports folder to open the Add Existing Item dialog box, navigate to the location where you saved the .rdl file for the report, and then click Add.
Right-click the Data Source to verify the connection string is correct.
Besides, please make sure that software vendor had assigned ‘View reports’, ’Manage reports’, ‘Manage folder’ and ‘Manage data sources’ tasks for your account, so that you can download the report and view the data source.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot save files to Windows server 2003 file server from MAC

Hi,
We have few MAC users and others mostly windows based users. Problem now is MAC users cannot save any files to the file server. I had the issues to save in the portable hard drive then i format the HDD to fat 32 and now i can save, But the file server cannot
be done like that.
What i can do to save the files to file server? please advice me
thanks
saththiyan

I cannot attach another NAS as CEO need to save files to all the folders which is there in the file server already,
You can share the folder and map a drive across the network to access the shared folder on the file server. Shared folders formatted NTFS do not affect network access. You would do that by using the SMB. Here's how:
How to Map Network Drive in Mac OS X
http://www.technipages.com/how-to-map-network-drive-in-mac-os-x.html
What OS version is the server? Is it a DC? You may need to reduce security on the server to allow Macs to access the server. Here's more info:
How to Disable SMB 2.0 on Windows Vista/2008/2008 R2
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
"To disable SMB ... Otherwise, disable SMB signing on Windows Server 2003 domain controllers.
http://support.microsoft.com/kb/325379
How to enable Windows 98/ME/NT and MAC clients to logon to Windows 2003 based Domains
http://support.microsoft.com/default.aspx/kb/555038
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

Replacing Exchange 2007 with another server with new server name

I am working with a client to move Exchange from the server it is on now to another server. This will be new hardware and new name. The current server Exchange is on will still exist by I want to move Exchange completely off of that server.
Current Network Setup:
Server 1: 1 SBS 2003 server is Domain Controller, Runs AD, DNS, DHCP, File Sharing, SharePoint 2003 and Remote Desktop
Server 2: Server 2008 running Exchange 2007, Backup Domain Controller, File Sharing, SharePoint 2007, Terminal Services.
Current Plan:
Introduce Server 3 to run just Exchange 2007. I would like to completely over a short period of time move exchange from Server 2 to Server 3. I have searched over the internet and found several articles but still have a few questions. There are roughly 75
mailboxes with 50 actual users. Some users are using Outlook 2003 that came with the SBS 2003 and others are using Later versions of office. Server 3 will be a Server 2008 R2 system.
1. What is the best method to perform this transfer. I found article TechNet
Article that explains with 2 remote offices how to do this but not sure if the same will apply.
2. Since I am not immediately decommissioning Server 2 how can I safely remove all the roles and add them to Server 3?
3. For the end user impact. Will the change make Outlook automatically pickup the new server name or will each user need to reconfigure their outlook profiles?
4. I will be moving OWA since there are several Remote and Terminal Service users that use OWA for email. I would like to keep the same certificate and domain name setup if possible.

Hi,
According to your description, I recommend you install another exchange 2007 on server 3, the exchange server role as the same as server 2.
And then, transfer all mailboxes and configurations(OWA,DNS..) from server 2 to server 3.
Finally, decommission the server 2 .
Thanks.
Niko Cheng
TechNet Community Support

DMS Server with File server

Similar Messages

Maybe you are looking for