DMV to get Backup and Restoration complete percentage

hi all,
Any DMV to get Backup and Restoration complete percentage in SSAS Database like what we have sys.dm_exec_requests in OLTP.
Thanks

Hi Devbi,
According to your description, you want to get Backup and Restoration complete percentage by using DMV, right?
Analysis Services DMV are query structures that expose information about local server operations and server health. The query structure is an interface to schema rowsets that return metadata and monitoring information about an Analysis Services instance.
All the DMV are list on the link below, and based on my research, there is no such a DMV that return the Backup and Restoration complete percentage.
http://msdn.microsoft.com/en-us/library/hh230820.aspx
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

TS3198 After doing the backup and restore how do you know if the phone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

After doing the backup and restore how do you know if the iphone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

If you don't get the message, your phone is NOT unlocked.

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

I lost my music after backup and restore. can i get it back

is it possible to get my music back after a backup and restore ? i lost all my music.

Is all your music in iTunes on your computer? If so with your device plugged in make sure the sync music box is checked.

I have an iPhone 4, and I DESPISE iOS 7. I'm only 13, so too anxious to backup and restore for fear of losing apps and music. Any solutions on how to get back there without backup and restore? I'm desperate.

I have an iPhone 4. I DESPISE iOS 7, I'm only 13 so
I'm too nervous to backup and restore my phone for
Fear of losing apps, music, notes, etc..
Is there anyone out there who can help me get back
With iOS 6 without the backup and restore? I'm desperate.

Here are few tips to speed up your phone http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
battery issues look here http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Also you can try settings - general - reset - reset network settings.

I recently did a backup and restore on my Iphone 4 because I was switching carriers. When i switched carriers i went back to I tunes to restore all that iI backed up I can't get any of my pics back contacts or anything. is there a way to recover the data?

I recently did a backup and restore on my Iphone4 because iI was going to switch carriers. When I switched carriers I went back to I tunes to restore my backup and nothing was there .Some how I lost all of my data, is there a way I can retrive my data or not? I had all of my pics and contacts on the backup. please help..

When you say nothing was there, do you mean the backup wasn't there?

RMAN backup and restore for Disaster Recovery

Hi Guys,
I am very new to Oracle and have a question about RMAN backup and restore feature. I am simulating a disaster recovery scenario by having two VMs running oracle 11g, say hosta and hostb, hosta is sort of production db and the other a disaster recovery db (one that will be made primary when disaster occurs). My goal is to backup production db using RMAN and restore it on the other machine. For some reason when I restore the db on hostb, the command restores the previous backup but not the most recent one e.g. I took a backup yesterday (09/20) and applied it to the hostb that worked fine, but when I try to apply a fresh backup from today (09/21) it always picks up the old backup. Here's a dump of the screen:
Starting restore at 21-SEP-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /oracle/app/dev/oradata/forums/s
ystem01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /oracle/app/dev/oradata/forums/s
ysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /oracle/app/dev/oradata/forums/u
ndotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /oracle/app/dev/oradata/forums/u
sers01.dbf
channel ORA_DISK_1: reading from backup piece /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp
channel ORA_DISK_1: piece handle=/oracle/app/dev/flash_recovery_area/FORUMS/back
upset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp tag=TAG20110920T040950
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:05
Finished restore at 21-SEP-11
Notice that it reads the backup piece from this location /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/
whereas my latest backups are stored at a different location.
I am executing following steps at the RMAN prompt on hosta and hostb:
hosta (production site)
backup as compressed backupset database plus archivelog
backup current controlfile format'/oracle/oracle_bkup/ctl_%U'
backup spfile
hostb (Disaster site)
set dbid=13732232063
startup force nomount
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/2011_09_21/o1_mf_nnsnf_TAG20110921T114945_77ndg9ys_.bkp'
shutdown immediate
/* create a init<db_name>.ora file with SPFILE= /oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora */
startup force pfile='/export/home/dev/restore_db/initforums.ora' nomount
restore controlfile from '/export/home/dev/restore_db/backupset/2011_09_21/ctl_1hmn3mic_1_1'
/* restart rman here */
quit
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/2011_09_21' noprompt;
/* call the next two commands on run */
restore database;
recover database;
alter database open resetlogs
quit
Any help will be greatly appreciated.
Thanks,
Rajesh

Thanks guys, I really appreciate all your help here. I redid everything all over again to get all the information you guys wanted. Since I noticed that more eyes are looking into this I am going to reiterate my steps one more time followed by specific answers to questions. My first backup on Host B is located under ..../restore_db/backupset whereas the subsequent one is under .../restore_db/backupset/backupset2.
I take backup on Host A using:
rman target /
backup as compressed backupset database plus archivelog;
backup spfile;
quit;
I restore the backup on Host B using:
set dbid=13732232063;
startup force nomount;
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/o1_mf_nnsnf_TAG20110928T171830_787gbpxh_.bkp'
shutdown immediate;
startup force nomount;
restore controlfile from '/export/home/dev/restore_db/backupset/o1_mf_ncsnf_TAG20110928T171638_787gbkxn_.bkp'
quit;
/* restart rman here */
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset' noprompt;
restore database;
recover database;
alter database open resetlogs;
quit;
I take another backup on Host A using (notice no spfile backup this time):
backup as compressed backupset database plus archivelog;
quit;
I restore the database on Host B using:
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/backupset2' noprompt;
recover database;
alter database open;
quit;
Output of List Backup of database (I have done this after I recovered the second time, also note that it is referring to backupset2 which is were my second backup is stored)
RMAN> list backup of database;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 91 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /export/home/dev/restore_db/backupset/o1_mf_nnndf_TAG2011092
8T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
97 Full 259.16M DISK 00:00:00 28-SEP-11
BP Key: 100 Status: AVAILABLE Compressed: YES Tag: TAG20110928T18352
7
Piece Name: /export/home/dev/restore_db/backupset/backupset2/o1_mf_nnndf
TAG20110928T183527787lv0nb_.bkp
List of Datafiles in backup set 97
File LV Type Ckp SCN Ckp Time Name
1 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
Output of list backup (done after restoring the control file)
RMAN> list backup;
BS Key Size Device Type Elapsed Time Completion Time
87 89.20M DISK 00:00:26 28-SEP-11
BP Key: 87 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g50bm_.bkp
List of Archived Logs in backup set 87
Thrd Seq Low SCN Low Time Next SCN Next Time
1 34 1302253 20-SEP-11 1306439 20-SEP-11
1 35 1306439 20-SEP-11 1307647 20-SEP-11
1 36 1307647 20-SEP-11 1307701 20-SEP-11
1 37 1307701 20-SEP-11 1311393 20-SEP-11
1 38 1311393 20-SEP-11 1311511 20-SEP-11
1 39 1311511 20-SEP-11 1332479 20-SEP-11
1 40 1332479 20-SEP-11 1344418 20-SEP-11
1 41 1344418 20-SEP-11 1350409 20-SEP-11
1 42 1350409 20-SEP-11 1350449 20-SEP-11
1 43 1350449 20-SEP-11 1350854 21-SEP-11
1 44 1350854 21-SEP-11 1350895 21-SEP-11
1 45 1350895 21-SEP-11 1353114 21-SEP-11
1 46 1353114 21-SEP-11 1353254 21-SEP-11
1 47 1353254 21-SEP-11 1353865 21-SEP-11
1 48 1353865 21-SEP-11 1353988 21-SEP-11
1 49 1353988 21-SEP-11 1375403 21-SEP-11
1 50 1375403 21-SEP-11 1376149 21-SEP-11
1 51 1376149 21-SEP-11 1376206 21-SEP-11
1 52 1376206 21-SEP-11 1376246 21-SEP-11
1 53 1376246 21-SEP-11 1379990 21-SEP-11
1 54 1379990 21-SEP-11 1380229 21-SEP-11
1 55 1380229 21-SEP-11 1380266 21-SEP-11
1 56 1380266 21-SEP-11 1380528 21-SEP-11
1 57 1380528 21-SEP-11 1380724 21-SEP-11
1 58 1380724 21-SEP-11 1380861 21-SEP-11
1 59 1380861 21-SEP-11 1381033 21-SEP-11
1 60 1381033 21-SEP-11 1381077 21-SEP-11
1 61 1381077 21-SEP-11 1402243 22-SEP-11
1 62 1402243 22-SEP-11 1423341 22-SEP-11
1 63 1423341 22-SEP-11 1435456 22-SEP-11
1 64 1435456 22-SEP-11 1454415 23-SEP-11
1 65 1454415 23-SEP-11 1490903 23-SEP-11
1 66 1490903 23-SEP-11 1491266 23-SEP-11
1 67 1491266 23-SEP-11 1491347 23-SEP-11
1 68 1491347 23-SEP-11 1492761 23-SEP-11
1 69 1492761 23-SEP-11 1492891 23-SEP-11
1 70 1492891 23-SEP-11 1493678 23-SEP-11
1 71 1493678 23-SEP-11 1493704 23-SEP-11
1 72 1493704 23-SEP-11 1494741 23-SEP-11
1 73 1494741 23-SEP-11 1494790 23-SEP-11
1 74 1494790 23-SEP-11 1510154 23-SEP-11
1 75 1510154 23-SEP-11 1514286 23-SEP-11
1 76 1514286 23-SEP-11 1531967 24-SEP-11
1 77 1531967 24-SEP-11 1543266 24-SEP-11
1 78 1543266 24-SEP-11 1558427 24-SEP-11
1 79 1558427 24-SEP-11 1566924 24-SEP-11
1 80 1566924 24-SEP-11 1578292 24-SEP-11
1 81 1578292 24-SEP-11 1596894 25-SEP-11
BS Key Size Device Type Elapsed Time Completion Time
88 84.03M DISK 00:00:30 28-SEP-11
BP Key: 88 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g63s9_.bkp
List of Archived Logs in backup set 88
Thrd Seq Low SCN Low Time Next SCN Next Time
1 82 1596894 25-SEP-11 1609028 25-SEP-11
1 83 1609028 25-SEP-11 1622303 25-SEP-11
1 84 1622303 25-SEP-11 1626430 25-SEP-11
1 85 1626430 25-SEP-11 1634486 25-SEP-11
1 86 1634486 25-SEP-11 1648398 25-SEP-11
1 87 1648398 25-SEP-11 1669259 26-SEP-11
1 88 1669259 26-SEP-11 1686820 26-SEP-11
1 89 1686820 26-SEP-11 1686959 26-SEP-11
1 90 1686959 26-SEP-11 1689168 26-SEP-11
1 91 1689168 26-SEP-11 1704759 26-SEP-11
1 92 1704759 26-SEP-11 1719597 27-SEP-11
1 93 1719597 27-SEP-11 1740407 27-SEP-11
1 94 1740407 27-SEP-11 1750125 27-SEP-11
1 95 1750125 27-SEP-11 1765592 27-SEP-11
1 96 1765592 27-SEP-11 1781498 28-SEP-11
1 97 1781498 28-SEP-11 1802311 28-SEP-11
1 98 1802311 28-SEP-11 1811009 28-SEP-11
1 99 1811009 28-SEP-11 1813811 28-SEP-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 89 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_nnndf_TAG20110928T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf

Attempting to use "backup and Restore" giver error message

In November 2014 I backed up my PC ( see below ) onto a 2TB ecternal drive ( Lacie). This ok and can restore. Spare space 1.2TB
Now when I attempt to Backup again, using Windows Backup and restore, with same settings I get an error message :
"The requested operation cannot be performed on a file with a user-mapped section open" This appears after some time of activity. There is no mention of WHICH file causes the problem. I have repeated with different settings ie with
part backups only, or just one drive only.
The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
I would very much appreciate some advice.

Hi and thank you Mandy.
After many failed attempts - even backing up a few files to test - I was getting nowwhere. Eventually I succeeded after disabling start menus and uninstalling some programs. I also disabled my Kaspersky anti-virus completely and disconnected
the internet!! This time the backup and system image appeared to be OK .
You have helped, Mandy, by identifying the anti-virus as a possible culprit!! Thank you. Next time I backup I will just
temporally disable it and see what happens.
Kind regards
Malcolm

How to backup and restore working Mac OS 9 computer ?

I have a working G4 running OS 9.0, and I would like to backup and restore that hard disk to a second G4 computer that is OS 9 bootable.
I have a CD backup taken by Toast v4, of the entire disk, but I do not know how to restore the contents to the second computer. My previous attempt hosed the hard disk inside the second computer.
I'm thinking I can boot up the second computer via cd-rom or external hard disk, but I'm not sure I can copy the contents from the cd-rom correctly. In particular, I'm guessing the boot sector is challenging to restore.
I probably have some old OS 9 cd-roms around here, if I need to go that route.
I've thought about removing the working hard disk, and using dd on a linux machine to make a clone of the drive. I'd prefer not to go that route, as I don't want to touch working hardware.
I've also thought about hooking up a portable USB disk drive to my working OS 9 machine, and doing some sort of cloning. I'm not sure what program I would need to do that, and whether it's part of the OS 9 suite of tools, or a 3rd party tool. I used to own some various disk tools, but it's been so long I'm not sure I can find the cd's.
So if anybody can point to some instructions on the net for me to follow, or have any suggestions, I'm all ears.
Thanks
mark

If the second computer originally shipped supporting a newer OS 9.x
system than the first 9.0, the other computer's OS9 version probably
won't work since it would be too old. In the case of drag and drop,
you can get away with a lot more than what an installer package may
allow, since the installer's software can be avoided with Pacifist. So
another computer's OS9.2.2 basic system could be used as a boot
volume even if it is sparse and not the fully complemented OS 9.2.2
that a full retail build would install from a rich full retail install disc.
Usually the retail path was an OS 9.2.1 retail and the update to 9.2.2;
but machines requiring OS 9.2.2 won't like a 9.2.1. Sometimes, since
a drag and drop is not driven by installer software, you can use older.
But machine specific bits, some critical for graphic card drivers & etc,
would be likely missing unless the software used offered that support.
If you can find one of these, it may work = note, out of stock:
691-3638-A Apple G3/G4 9.2.2 (CD) System Software
{This is a Mac OS 9.2.2 full installation CD, color Grey.}
These do not come in retail packaging.
http://www.welovemacs.com/6913638a.html
Have fun, even if it isn't exactly as planned.
Good luck & happy computing!
{ edited }

Reformatting Computer's Hardrive: Need help with Backup and Restore?

Hi,
I'm getting ready to reformat my hardrive and I'm backing up all of my files. All apps will be reinstalled after the drive is formatted.
I have a ton of music that I've purchased from itunes and mp3s that I've ripped from my CDs in my main itunes folder. I will backup this folder (if necessary). Do I need to back up the licenses? If so, where are they stored? Or, what's the best and most efficient way to go about this backup and restore process? If my Ipod has all my music/videos, will it just copy all the music/videos back to my newly reformatted hardrive while maintaining the original folder structure? I assume I will have to install a fresh copy of itunes first. Also, I'm worried about the licensing for the purchased music. Is there something special I need to do with these files?
I appreciate it if someone can give me the detailed steps to go about this without issue. I'm thinking this is a pretty easy question to all the techies out there...
Thanks,
Brandon

Back up or copy the iTunes folder. There are no licenses to worry about, buy Deauthorize your computer in iTunes before you reformat. After you restore everything play one of the songs you purchased from the iTunes Store and enter your Apple ID and password to Authorize your computer.

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

Ideas for Providing User Level Data Backup and Restore

I'm looking for ideas for implementing a user level application data backup and restore in an Apex app.
What would be great is to have a user be provided an export file and a way to import this file. A bit overkill but hopefully never needed.
Another option that is perfectly doable is a report that simply provides a means to create an export of the data. Since I already have an interface I can use an export to interface an export.
Any thoughts?
Hopefully I'm missing something already there for an end user to use.

jlincoln wrote:
"Do you mean "export" and "import" colloquially, or in the specific sense of the exp/imp/datapump utilities?"': I mean as in imp/exp Oracle utilities. Generally speaking, it would be neat to be able to export and import via an Apex an application. In this hosted environment I don't have that access but would this be a bad idea if you don't care about the existing data in the schema in which the data resides?I can envisage a mechanism using <tt>exp/imp</tt>, but since it requires <tt>dbms_scheduler</tt> external jobs and access to the file system it's highly unlikely to be possible in a hosted environment. (Unless you're doing the hosting?)
Backup: Necessary for piece of mind and flexibility. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group.
Restore: Like I said. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group. This is a very small data set. A restore would simply remove existing data and replace it with the new data.My opinion is that time would be better spent working on the user rather than a redundant backup and restore feature. Involve them in a disaster recovery exercise with whoever is hosting the environment to prove that their data is safe. Normally the inclusion of data in regular, effective database backups is sold as a major feature of APEX solutions.
"What about security/privacy when this data ends up in uncontrolled environments?": I don't understand the point of this question. The data should not end up in uncontrolled environments. Just like the data in the database or its backups.Again, having data in a central, shared location protected by multiple levels of application, database, and OS security is usually seen as a plus for APEX over VB/Access. Exporting the data in toto to a PC/laptop that can be stolen or lost, and where it can be copied to USB drives/phones/email loses this protection.
User Level: Because the end user must have access to the backup and restore mechanisms of the application.
Application Data: The application data. Less than 10MB. Very small. It can be exported in a flat file downloaded by the end user. This file can then be used to upload and import via an existing application interface. For example.
"I'm struggling to parse this for meaning.": When I say I have an existing interface I am referring to a program residing in the Apex application that will take data from a flat table structure (i.e. interface table), validate the data, derive data, and load into the target table structure.Other than the report export capability linked to above, there's nothing built-in to APEX that comes close to your requirement. If the data is simple enough that it can be handled in such a report, and you have a process that can read and recreate this export, then you have your backup/restore capability. If the data can't be handled in a simple report, then you'll need a more complex PL/SQL process to generate the file.

Synchronization Issue backup and restore errors

Hi,
I have implemented synchronization in local on two instances and worked well for me. But when I am trying to implement the same in Prod server, it is giving exception backup and restore errors. Please let me know, is it possible to implement Synchronization
on same server in two different instances ?
Thanks,
Moorthy

Hi Moorthy2015,
According to your description, you get issue when sychronizing SSAS database server. Right?
In Analysis Services, it is supported to do sychronization for SSAS databases between different instances on same server. We can also sychronize two different SSAS servers. So in this scenario, you can do sychronization between Pro server and Dev server.
Please refer to links below:
How to synchronize two SSAS Servers
Synchronization with Microsoft SQL Server Analysis Services
If you issue still persists, plesae share some detail information about the error.
Best Regards,
Simon Hou
TechNet Community Support

Backup and restore LMS 3.1

We have cisco works LMS 3.1 and the server have very problems, we need format the server and reinstall the Cisco Works, when I doin backup and restore of data LMS We lost the licenses? or when we restore the data in the server we have the same licenses? or get the new licenses to cisco?

If you dont have the data, I would recommend a clean install for LMS 3.2 and not an upgrade. without looking at the error, it is hard to tell if it is an cosmetic one or imapcting.
LMS 3.1 is anyways EOS/EOL soon. Follow these tips for windows:
https://supportforums.cisco.com/docs/DOC-9132
-thanks
Vinod

DMV to get Backup and Restoration complete percentage

Similar Messages

Maybe you are looking for