DNS Error shown when running the Webdynpro project

Hi All
When ever i try to run the webdynpro project i am getting the Error
Bad Gateway
The following error occurred:
[code=DNS_HOST_NOT_FOUND] The host name was not found during the DNS lookup. Contact your system administrator if the problem is not found by retrying the URL.
And also in SMMC when i click on Blue node the same error is shown.
The Host name in which i have installed the WAS is right.
How do i rectify it.
Regards,
Vijaya.

Hi Vijaya,
This could be problems with the static and dynamic IPs.
Try ping command
1. ping -a IPADDRESS
2. ping HOSTNAME
The above two commands should resolve to same machine.
If not the system administrator should delete the entry in DNS.
Regards, Anilkumar

Similar Messages

Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

When installing a NI 5112, I get an error message when running the test panel.

I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
Thanks,
Thomas

Hello Thomas,
The error code you are getting is related to the board not recording enough samples in the given time interval. May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
LeeM
AE,
National Instruments
Message Edited by LeeM on 10-31-2006 10:47 AM

Error when "run" the "helloworld" project

Hello the expert,
I am a newbie to the Weblogic. I am trying to setup a helloworld project on Eclipse using Weblogic server. When I "run" the project, I got the following error below. Could anyone please point me out what I did wrong on my setup?
Thanks,
Vincent
My web.xml is as the following
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
     <display-name>helloworld</display-name>
     <welcome-file-list>
          <welcome-file>home/index.jsp</welcome-file>
     </welcome-file-list>
</web-app>
=================================================================================
<May 2, 2012 7:03:39 AM EDT> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\first_Weblogicview\SoftwareRelease\Development\SourceCode\web\helloworld. Please make sure that the annotations are valid. The error is >
<May 2, 2012 7:03:39 AM EDT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1335956596075' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'helloworld''
weblogic.application.ModuleException: Failed to load webapp: 'helloworld'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.UIComponentTag
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
     Truncated. see log file for complete stacktrace
>
<May 2, 2012 7:03:40 AM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating distribute task for application '_auto_generated_ear_'.>
<May 2, 2012 7:03:40 AM EDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'helloworld'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.UIComponentTag
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
     Truncated. see log file for complete stacktrace

Please include the JSF implementation files (jsf-api.jar, jsf-impl.jar) in the application (EAR file) APP-INF/lib, and then add the following in weblogic-application.xml:
<prefer-application-packages>
<package-name>javax.faces.*</package-name>
<package-name>com.sun.faces.*</package-name>
</prefer-application-packages>For more information on configuring filtering classloader, please review the below documentation:
http://docs.oracle.com/cd/E23943_01/web.1111/e13706/classloading.htm#i1097253
Arun

Getting a runtime error when running the test project

I was running a test project which did execute without any problems. Then I added 2 extra DLLs and wrote some code as well. After that I got the below specified run time error. Though I removed those DLLs and new code still it doesn't run. This was running
fine though. Please advice.
Warning: Test Run deployment issue: The assembly or module 'Npgsql' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'IBM.Data.DB2' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'Oracle.DataAccess' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
mayooran99

@Mayooran99,
I agree with Andy. By the way, when you build a new test project and if you want to add dll to your project, please make sure you will follow this article:
https://msdn.microsoft.com/en-us/library/wkze6zky.aspx
When you use Add reference dialog please don't forget to set copy local to true.(By default I think new project will not have this problem, the reason may like Andy mentioned that you still have some references to those two dlls when you removed them)Best
regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when running the Webdynpro Application

Hi All,
I am getting the following error when testing the WDA Application. Please let me know what can I do to resolve the error. I appreciate the help. Thanks
The following error text was processed in the system DRD : Screen output without connection to user.
The error occurred on the application server DOWNEA023_DRD_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSTRD
Function: TRINT_POPUP_EDIT_CANCEL_SHOW of program SAPLSTRD
Form: RAISE_ERROR of program SAPLSTRD
Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
Function: TR_OBJECTS_CHECK of program SAPLSTRD
Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
Form: UPDATE_PLOG of program SAPLRHAP
Function: RH_UPDATE_DATABASE of program SAPLRHAP
Form: UPDATE_DATABASE of program MP100100
Form: LEAVE_ACTUAL_DYNPRO of program MP100100
Thanks

I have the same problem.
I'm trying to open up excel (Bex Analyzer) using the following code:
call function 'RSAH_LAUNCH_EXCEL'
    exporting
      i_genuniid                 = '4AW30ILXE3NN5MQTO3SW0GUY0'
     i_workbookid               =
      i_hide_sapgui              = 'X'
    importing
      e_log_handle               = l_log_handle
    exceptions
      excel_wrong_version        = 1
      excel_viewer_not_installed = 2
      bexanalyzer_not_installed = 3
      others                     = 4.

Error message when run the Cisco CRS Serviceability Utility on UCCX 4.5 server

Hi,
Everytime i run the Cisco CRS Serviceability Utility from the UCCX server, this message always appear "Error reading System Parameters" before the interface appear.
After that, when i click the "System Parameters" tab and there were no any information displayed.
So, i would like to know if there were any way could fix this problem.
Thanks for any suggestion.
B.rgds,
Tong

Tong,
The description that you are ginving us sounds preaty much like this bug : CSCsi25913
This is the link with the informatio:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCsi25913
HTH
Please rate this post if was helpful
Walter Solano
CCNA Voice
Cisco UCCX Specialist

Errors found when running the example of "Five XSLT 2.0 Features ..."

Does anyone encounter the error "XSL-1015: (Error) Function 'current-group' not found" when running Oraxsl grouping_20.xsl?
Despite I followed exactly what memtioned in the article, it still did not work.
Thank you very much.

Before running the samples, I downloaded the Oracle XDK 10G via http://otn.oracle.com/tech/xml/xdkhome.html
just a week ago.
So, I believe I got the most up-to-dated version of XMLparserv2.jar.
I spent a day or 2, trying to execute some samples in the article, but things did not work out well. Whenever a stylesheet file (*.xsl) contains "current-group()" functions, it raises the above error.

Error Message when run the Application

Hi
i am getting an error when i run my java application.
Error is like that-->
Cannot load tie class for com.inqmy.services.httpserver.server._HttpRuntimeInterfaceImpl_Tie.
java.lang.ClassNotFoundException: com.inqmy.services.httpserver.server._HttpRuntimeInterfaceImpl_Tie
at com.inqmy.services.iiop.server.IIOPProvider.loadObject(IIOPProvider.java:220)
at com.inqmy.services.iiop.server.IIOPProvider.getObjectReference(IIOPProvider.java:143)
at com.inqmy.core.service.context.container.cross.PortableRemoteObjectContainer.getReference(PortableRemoteObjectContainer.java:221)
at
Please tell me the reason for this error.
regards
Atul

yeah this is most probably due to the Environment which u've.
Try to reinstall the webcontainer and everything.
and Memory also caused this kind of problems most of the times.
this kind of errors encounters rarely. if your webcontainer is overloaded and the memory is low then u'll get such kind of errors.
Diablo

I need to help with splash top / quick start. I am getting and error message when run the app.

I just receive this computer in mar 2009. I found this app out and try to install it. When I go to run it give me error message. The installation is not complete please repair the software. I also update my bios like it says. It will not run can you help me fix this issue. I like this app. I want it to work.

This page http://forum.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&thread.id=1742 provides helpful information on how to activate Splashtop on S10.
If it still can't help you, I guess you will get more help if you can provide more information like your detailed netbook version, os information, and the detailed error information.
Message Edited by DouDou2007 on 03-23-2009 12:24 AM

ERROR MESSAGE WHEN RUNNING THE REPORT

Hi Team
REP-0118: Unable to create a tempory file i am getting error when i am runnig the report ,
It is not problem in my system, i check in other system also same problem is comming
What to do?
Thanks

Hello,
CHeck the value of REPORTS_TMP.
Else, you can test with rwrun60 / rwrun and use tools like :
Windows : filemon
UNIX : truss / strace
To get more info about this error
Regards

Error occured when running the "Receiving Transaction Processor"

Dear all :
We just found the scheduled concurrent program "Receiving Transaction Processor" all failed from last day,
and this program is always trying to re-run till it could finished successful.
the request log like following :
采购管理系统: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: 接收事务处理处理器
当前的系统时间为 25-02-2013 17:10:28
并发程序 RVCTP 返回错误
原因：RVCTP 遇到内部错误。参数：RVCTP,BATCH,,,
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮助。
RVTBM-007：子例行程序 rvtbm_batch_mngr() 返回的错误
原因：子例行程序 rvtbm_batch_mngr() 返回时出现内部错误。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以
RVTBM-080：子例行程序 rvtptcontrol() 返回的错误
原因：子例行程序 rvtptcontrol() 返回时出现内部错误。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮
RVTLO-050：ORA-01403: 未找到任何数据
原因：在 RVTLO 中出现 SQL 错误。SQL 错误为 &LSQL_ERR。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理
在试图启动立即并发程序 RVCTP 时，并发管理器出现错误。例行程序 &ROUTINE 接收到返回代码失败的信息。
请与您的支持代表联系。
当前的系统时间为 25-02-2013 17:10:29
成功地重新提交具有请求编号 21500965 的并发程序 RVCTP，以在 25-02-2013 17:05:30 启动。 (ROUTINE=AFPSRS)
正在执行请求完成选项...
Output file size:
0
未打印输出文件，因为：
已禁用此报表的打印选项。
已完成执行请求完成选项。
thanks and regards
Filex Liu

Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu

Error when running the apxldimg.sql to update the images direct from rel3.0

Hi everyone,
I'm new to APEX. I'm upgrading from v3.0 to v3.1. I'm on the post-installation, section on "Updating the Images Directory When Upgrading from Release 3.0", I ran into error below when running the apxldimg.sql script. Has anyone run into the is error before. If yes, how did you fix it?
Directory created.
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
ERROR at line 15:
ORA-06550: line 15, column 36:
PLS-00306: wrong number or types of arguments in call to 'XMLTYPE'
ORA-06550: line 15, column 25:
PL/SQL: Item ignored
ORA-06550: line 38, column 15:
PLS-00302: component 'EXISTSRESOURCE' must be declared
ORA-06550: line 38, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 46:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored

My team member found another post that ran into the same problem and the section is for 11g only. My db is 9.2.0.5.

No Data Shown because an error occurred while running the query

Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product Manager

What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey

Error when running the ant task

Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java]      at java.lang.Win32Process.create(Native Method)
[java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
[java]      at java.lang.Runtime.execInternal(Native Method)
[java]      at java.lang.Runtime.exec(Runtime.java:566)
[java]      at java.lang.Runtime.exec(Runtime.java:491)
[java]      at java.lang.Runtime.exec(Runtime.java:457)
[java]      at weblogic.utils.Executable.exec(Executable.java:227)
[java]      at weblogic.utils.Executable.exec(Executable.java:156)
[java]      at weblogic.utils.Executable.exec(Executable.java:142)
[java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
[java]      at weblogic.utils.compiler.T

Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java]      at java.lang.Win32Process.create(Native Method)
[java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
[java]      at java.lang.Runtime.execInternal(Native Method)
[java]      at java.lang.Runtime.exec(Runtime.java:566)
[java]      at java.lang.Runtime.exec(Runtime.java:491)
[java]      at java.lang.Runtime.exec(Runtime.java:457)
[java]      at weblogic.utils.Executable.exec(Executable.java:227)
[java]      at weblogic.utils.Executable.exec(Executable.java:156)
[java]      at weblogic.utils.Executable.exec(Executable.java:142)
[java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
[java]      at weblogic.utils.compiler.T

DNS Error shown when running the Webdynpro project

Similar Messages

Maybe you are looking for