DNS stopped updating

NW 6.5.8
dhcpsrvr Version 3.14 30 October 2008
Noticed recently that DNS stopped updating
Local client get the IP correcty, but the info is not writen/updated in DNS
DNS Zone is setup for Dynamic Update (and that was working for years)
Any ideas?
Thanks
Seb

I had this setup years ago, as to when I noticed few week(s) back the
updates were happening with no problems
Checking log I get:
DHCP & DNS are on separate servers, both have RW replicas, communicating
just fine
1 zone, 1 subnet, 1 pool, flat network
Get type:4, IPAddr:0.0.0.0, LeaseTime:0, MacIndx:29277, pIP:6DEB0180
Using existing IP with subnet A000000
SubmitJob called with addr=10.0.5.32, leaseExpiration=0,
lease=5184000, operation=2
DetermineLeaseTime: proposed=0, return=5184000,
pSubnet->leaseTime=5184000
AMAGet() exit err:0, subnet:10.0.0.0, addr:10.0.5.32
2011/01/21 08:31:32 <DHCPDISCOVER> packet received from client
<0:21:70:A4:14:D7>.
Sending reply as a subnet broadcast.
2011/01/21 08:31:32 Sending BOOTP/DHCP reply <DHCPOFFER> to
<0:21:70:A4:14:D7> as <255.255.255.255>.
ProcessJob pass IP DN: 10_0_5_32.SPGS_10_Subnet., hostname
SPGS-D630-11-, operation 2
ProcessDNSUpdate entered, operation DELETE
ProcessDNSUpdate, domain name:SPGS-D630-11-.spgs.org
SendWakeupMsg: sent 10 characters.
Got the signal pattern.
InitiateDNSUpdate: writemsg() called with len=5A
AddZoneRecord: dnsLogInfo.LastZonePosition = FFFFFFFF, err=0
InitiateDNSUpdate: writemsg() failed, wrote to file
Seb
"joharmon" <[email protected]> wrote in message
news:[email protected]..
>
> I think a little more info is needed. Are you logs reporting the
> updates as even being attempted and failing? or do you not even see DHCP
> sending the updates over to DNS? Are you allowing updates under the
> zone's control lists? Primary server the same for the forward and
> reverse zones? etc . . . It could be a dozen different things based on
> the info provided.
>
>
> --
> joharmon
> ------------------------------------------------------------------------
> joharmon's Profile: http://forums.novell.com/member.php?userid=15424
> View this thread: http://forums.novell.com/showthread.php?t=430439
>

Similar Messages

  • HT201077 After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter.  From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer.  Help!

    After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter.  From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer.  Help!
    I have signed out then back into the cloud.  I have comfirmed location of the photostream folder.  I have have even restored settings on my phone.  any ideas on what I can do to get it working again?  or do I have to accept defect, and manually save my photos?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • How can I make sure iTunes doesn't stop updating my podcasts

    OK I'm subscribed to multiple podcasts, but I don't always get a chance to listen to them so some of them will stop updating and it says something like "iTunes has stopped updating this podcast because you haven't listened to any episodes lately".
    How can I make sure it doesn't do that? When I do get to listen to my podcasts, I would really like it if they weren't 3 weeks old.
    Message was edited by: MacAttakk

    someone made a script that fixes this. It seems to work for me. If you want it to do it automatically just make an iCal even for every 3 days or something that runs this script.
    http://dougscripts.com/itunes/scripts/download.php?sc=updateexpiredpodcasts

  • Multiple apple ID's stopped updating to pc

    I have multiple apple ID's for multiple devices.  I use icloud on my pc to sync the photostreams for all of them.  In the last 2 weeks they all stopped updating completely but one.  I have tried everything but 2 dont work and one still does. I have turned it on/off uninstalled, reset photostream.  Is there someway that they eventually just stop working?

    bump

  • My 80 gig ipod color stops updating half way through

    My ipod 80 gig color stops updating half way through the synch process. I have tried to restore it and it still fails and gives me an error message saying it cannot read or wrtie to the ipod after it is half way loaded after trying to load 5000+ songs only it gets to about 2,250 and stops.

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    If necessary, post the resultings numbers and we can verify what the next steps to take.
    B-rock

  • Bug:iTunes 7 stops updating podcasts that I do not want it to stop updating

    Some podcasts that I subscribe to are updated as often as every hour (for example, CNN's hourly update). I do not listen to the podcasts every hour, but always want the latest podcast there, or the podcast becomes useless. iTunes keeps deciding not to update those podcasts, and then I have to manually tell it to keep updating. There is no way to turn this off. Since I listen to a lot of podcasts of news shows and other content that is only useful to listen to soon after it was broadcast, this really degrades the usefulness of listening to podcasts in iTunes.
    Apple needs to provide a way to disable this behavior, or even better, to allow users to set a per-podcast update frequency and maximum stored podcast count. (I want all available unheard podcasts for my comedy podcasts, for example, but I only want the latest one or two podcasts for news podcasts because older ones are no longer useful.)
    Apple describes this behavior on this web page:
    http://docs.info.apple.com/article.html?artnum=301872
    "You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
    iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
    You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update."
    Thanks!

    And you're sure no one in your household is downloading them?

  • ITunes stops updating podcasts / iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?

    Hi,
    My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
    However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
    This is not what I intend... and not  what I  told iTunes to do... (at least this my reading of the below settings)
    This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
    How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
    Thank you for your ideas!

    Thank you for the response, Roger!
    OK, that's how it is then.
    The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
    Btw., for anyone interested, this is external script I am using now:
    http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
    Including the "cron job" setup here:
    http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
    Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
    If anyone knows of in-app solutions, please share...

  • IPod wont stop updating when ipod is connected, wont update on itunes 7!

    What is honestly wrong, every time i update my ipod now with itunes 7, it wont stop updating and it says its updating but it isnt, why is it doing this with itunes 7???

    I am having the same problem, did you get an answer on how to correct? Every since I downloaded the update, the update keeps going and there is no way to disconnect the IPOD button there anymore..

  • Mail stops updating

    I have a new issue with Mail where it stops updating. I have it set up with my Gmail via IMAP and have it set to check for new mail every minute. I do not have any input managers installed for Mail.
    I will often get new mail and Mail won't notify me. I can see it at the Gmail website, but it won't show up in Mail. Right clicking on the dock icon and picking "Get new mail" does not work, nor does right clicking in mail and picking "Synchronize Gmail". No errors appear and Mail plays the "no new messages" beep.
    However, relaunching mail will fix the problem, but only temporarily. So, it shows the inbox as empty, but if I relaunch mail, it will get the new mail and synchronize fine. This tells me that my account information is entered correctly because Mail can connect, it just stops working occasionally until I relaunch it. This is an annoyance because I can't rely on it to tell me if I have new mail.
    Anyone else have this problem or have any help for me? Any help is appreciated.
    Thanks.

    I don’t know how to solve your problem, but telling
    Mail to go offline, then online again (Mailbox >
    Go Online/Offline) might also work and you may
    find it more convenient -- you can put a button in
    the toolbar for that.
    That seems to do the trick, and it's definitely a lot easier than shutting down Mail. Thanks for the tip!

  • In the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??

    in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??

    Unknown "source"?  Do you mean unknown "error" followed by a number?
    http://support.apple.com/kb/TS3221
    Follow the instructions in the article.  When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode.

  • ACPI battery level stops updating

    Hello,
    I have a strange problem with battery level (displayed using xfce4-power-manager). At startup it updates but not very precisely (not percent by percent), after some minutes  it stops updating.
    I thought it was an xfce problem, so I installed xfce4-power-manager-git. But reading acpi status and getting /sys/class/power_supply/BAT0/ info reports same results as xfce. ACPI does not update battery level!
    Why acpi stops updating my battery level?
    I'm using kernel 3.15.10-1
    xfce4-power-manager-git
    xfce4-power-manager 1.4.1-1
    upower 0.99
    lah

    No one interested about this problem?
    Now, to get battery level I'm manually polling using a cron job executing acpi -V command...
    I've not yet found another solution to get battery level update working.
    I found another interesting point. When I resume from suspend battery level updates... Here are my logs when suspending / resuming
    dmesg
    [ 1137.086386] wlo1: deauthenticating from 00:1f:9f:e7:22:53 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 1137.092006] cfg80211: Calling CRDA to update world regulatory domain
    [ 1137.168083] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 1137.307402] PM: Syncing filesystems ... done.
    [ 1137.390588] PM: Preparing system for mem sleep
    [ 1137.390812] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 1137.392234] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 1137.393433] PM: Entering mem sleep
    [ 1137.393499] Suspending console(s) (use no_console_suspend to debug)
    [ 1137.394631] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 1137.394711] sd 0:0:0:0: [sda] Stopping disk
    [ 1137.557027] e1000e: EEE TX LPI TIMER: 00000011
    [ 1137.809968] PM: suspend of devices complete after 416.371 msecs
    [ 1137.823466] PM: late suspend of devices complete after 13.483 msecs
    [ 1137.824416] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 1137.824592] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
    [ 1137.824603] e1000e 0000:00:19.0: System wakeup enabled by ACPI
    [ 1137.824680] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 1137.836734] PM: noirq suspend of devices complete after 13.269 msecs
    [ 1137.837000] ACPI: Preparing to enter system sleep state S3
    [ 1137.853504] PM: Saving platform NVS memory
    [ 1137.853505] Disabling non-boot CPUs ...
    [ 1137.853535] intel_pstate CPU 1 exiting
    [ 1137.854780] kvm: disabling virtualization on CPU1
    [ 1137.854790] smpboot: CPU 1 is now offline
    [ 1137.855147] intel_pstate CPU 2 exiting
    [ 1137.856377] kvm: disabling virtualization on CPU2
    [ 1137.856383] smpboot: CPU 2 is now offline
    [ 1137.856949] intel_pstate CPU 3 exiting
    [ 1137.858168] kvm: disabling virtualization on CPU3
    [ 1137.858180] smpboot: CPU 3 is now offline
    [ 1137.859931] ACPI: Low-level resume complete
    [ 1137.859980] PM: Restoring platform NVS memory
    [ 1137.861096] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 1137.861225] Enabling non-boot CPUs ...
    [ 1137.861272] x86: Booting SMP configuration:
    [ 1137.861273] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 1137.873339] kvm: enabling virtualization on CPU1
    [ 1137.875919] CPU1 is up
    [ 1137.875970] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 1137.887493] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 1137.888105] kvm: enabling virtualization on CPU2
    [ 1137.890491] CPU2 is up
    [ 1137.890527] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 1137.902171] kvm: enabling virtualization on CPU3
    [ 1137.904609] CPU3 is up
    [ 1137.908608] ACPI: Waking up from system sleep state S3
    [ 1138.663122] acpi LNXPOWER:02: Turning OFF
    [ 1138.663203] acpi LNXPOWER:01: Turning OFF
    [ 1138.675606] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1138.675825] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 1138.675838] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1138.722182] PM: noirq resume of devices complete after 58.952 msecs
    [ 1138.722883] PM: early resume of devices complete after 0.648 msecs
    [ 1138.723159] mei_me 0000:00:16.0: irq 32 for MSI/MSI-X
    [ 1138.723478] e1000e 0000:00:19.0: System wakeup disabled by ACPI
    [ 1138.726178] snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X
    [ 1138.731841] sd 0:0:0:0: [sda] Starting disk
    [ 1138.841851] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
    [ 1138.928730] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
    [ 1139.045227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1139.045398] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [ 1139.045414] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
    [ 1139.045416] usb 3-2: hub failed to enable device, error -22
    [ 1139.047871] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1139.057847] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1139.058273] ata1.00: configured for UDMA/133
    [ 1139.205382] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [ 1139.205409] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
    [ 1139.205412] usb 3-2: hub failed to enable device, error -22
    [ 1139.365138] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [ 1139.378870] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b3b73120
    [ 1139.841774] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
    [ 1139.841797] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
    [ 1139.841800] usb 3-2.6: hub failed to enable device, error -22
    [ 1140.098137] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
    [ 1140.098161] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
    [ 1140.098165] usb 3-2.6: hub failed to enable device, error -22
    [ 1140.101400] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
    [ 1140.101410] rtc_cmos 00:03: System wakeup disabled by ACPI
    [ 1140.354747] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
    [ 1140.370114] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b3b73180
    [ 1140.370126] usb 3-2.6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1140.380774] PM: resume of devices complete after 1658.753 msecs
    [ 1140.381265] PM: Finishing wakeup.
    [ 1140.381268] Restarting tasks ...
    [ 1140.381412] acpi PNP0501:00: Still not present
    [ 1140.382480] usb 2-1.6: USB disconnect, device number 3
    [ 1140.389100] done.
    [ 1140.421569] pci_bus 0000:01: Allocating resources
    [ 1140.421585] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 1140.421589] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 1140.421599] pci_bus 0000:02: Allocating resources
    [ 1140.421622] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 1140.421624] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 1140.421632] pci_bus 0000:03: Allocating resources
    [ 1140.421658] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 1140.421660] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 1140.421663] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 1140.421668] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1140.421670] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1140.421672] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1140.421674] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1140.421676] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1140.421677] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1140.421687] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref]
    [ 1140.421697] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xbf400000-0xbf5fffff 64bit pref]
    [ 1140.421702] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xbf600000-0xbf7fffff 64bit pref]
    [ 1140.421707] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 1140.421710] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
    [ 1140.421713] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
    [ 1140.421980] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 1140.422076] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 1140.549726] e1000e: enp0s25 NIC Link is Down
    [ 1140.550076] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 1140.577868] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
    [ 1140.662671] usb 2-1.6: string descriptor 0 read error: -22
    [ 1140.684516] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
    [ 1140.771126] usb 2-1.8: new full-speed USB device number 5 using ehci-pci
    [ 1140.784983] usb 2-1.6: USB disconnect, device number 4
    [ 1140.787680] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
    [ 1140.971041] usb 2-1.6: new full-speed USB device number 6 using ehci-pci
    [ 1141.055968] usb 2-1.6: string descriptor 0 read error: -22
    [ 1144.446140] wlo1: authenticate with 00:1f:9f:e7:22:53
    [ 1144.455094] wlo1: send auth to 00:1f:9f:e7:22:53 (try 1/3)
    [ 1144.457056] wlo1: authenticated
    [ 1144.459038] wlo1: associate with 00:1f:9f:e7:22:53 (try 1/3)
    [ 1144.463874] wlo1: RX AssocResp from 00:1f:9f:e7:22:53 (capab=0x411 status=0 aid=1)
    [ 1144.463995] wlo1: associated
    lah

  • That stopped updating with ios 4.2.1 currently almost every app requires ios 4.3or higher. what do i do with my iphone

    i have problem with my iphone 3G that stopped updating with ios 4.2.1 currently almost every app requires ios 4.3or higher. what do i do with my iphone

    App developers decide on what iOS versions to support with their apps. Also, Apple has identified certain updates that are necessary for particular applications. The only way to continue using certain apps on the iPhone 3G is to not update your apps if they require a higher iOS to operate. When you get ready to update an app, it will say what iOS is works on, and if it requires higher than the iOS you have, do not update. The only other alternative is to replace the device with a newer model.

  • TOC stopped updating properly...

    Hello - I'm having an issue with my Table of Contents.  It has stopped updating properly.  I have a 90+ page manual where I had the TOC working fine.  I have been saving revisions of the manual when edits were made.  The issue is that when I go to Update TOC, it clears the entire TOC of all the headings for the main body content.  It keeps the "title" and the "Index" heading which happens to be the last entry for the TOC (this heading/page is not threaded with the rest of the main body).
    I went back and looked at TOC for previous revisions, and I changed something 2 revisions ago and since then the TOC stopped working.  The only significant format change I can remember is that the TOC originally was not threaded in with the main content of the document.  Looking back a couple of revisions ago I had gone in and threaded it to the main body of the document.  By the time I realized there was an error occurring I had saved yet another revision.  But in this last revision I went in an unthreaded the TOC from the rest of document but it did not correct the issue.  Needless to say, I have made several edits within the document that I haven't necessarily tracked (grammer, spelling).  So going back several revisions to the properly working TOC would require re-edits of that revision....something I'd rather not have to do.
    I'm using 3 levels of Section Headings/Paragraph Styles in my TOC --- and i've gone into the main body and those headings are still properly set as their respective paragraph style.  I've even tried creating a completely NEW TOC in my latest revision with just one paragraph style and nothing comes up in my TOC.  Its like nothings there or it can't see the tagged style in the document, but I know it is there.
    Any ideas?  Please help.
    THANKS!

    Hallelujah!  I believe I've fixed it.  Thank you to whoever added that "more like this" box on the side of the forums!  And for the following forum post from 2008.  Ain't the internet grand?
    This appears to have fixed the issue:  http://forums.adobe.com/message/1313052#1313052
    I knew through my back revisions it was a threading issue.  So I followed the above poster's advice and I basically CUT my entire manual and then deleted all the empty pages.  Added 2 pages back and then pasted my content into those pages.  Tested the TOC and when it asked me If i wanted to include overset text I knew I'd fixed it and that it was looking at all the headings.  The whole content came up just like its supposed to.  Then I added 90 more pages and expanded the thread back. All seems to be good.
    Do NOT put TOC in your threaded story.  Not cool.  I had it right at first and then put it in there ---- that's what screwed me up.
    ....now back to work!

  • I want iTunes to STOP updating my information, is this possible?  how?

    I want iTunes to STOP updating my information.  Each time I open my 21,000 song library in which I have carefully customized 'genre' and 'album' and 'album sort' iTunes CHANGES MY SETTINGS.  I want to stop this unasked for and unwanted corruption of my entries, please.  (e.g. album sort undoes alphabetical song order for an artist, which is unwanted and irritating .. I have ALL of my 'album sort' set as * .. this provides perfect alphabetization .. please stop changing 'genre' and 'album' and 'album sort'.
    <Email Edited By Host>

    Without the previous user erasing, using their Apple ID/password, the iPad you have an "electronic brick". You may have purchased a stolen iPad.
     Cheers, Tom

  • It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?

    It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?

    Fix iPhone Apps Stuck "Waiting" During Installation

Maybe you are looking for

  • How do I make a Portfolio open in Details view ?

    Anytime I create a PDF Portfolio it opens in LAYOUT View in both READER and Acrobat (it was created in Acrobat Acrobat 9 Pro). How can I program the Portfolio open in DETAILS View when a user opens the file in Reader ? (or Acrobat for that matter)

  • Why can't Verizon fix ordering for current Verizon customers?

    It should be EASY to buy a Verizon offered phone off the Verizon website as a VERIZON CUSTOMER! I'm autopay prepaid.  All I want is to purchase the Samsung G4 refurb off the site for the free deliver and activation.  However, the system says I have t

  • HP monitor issues

    My monitor keeps acting like there is a second monitor being plugged in, and switches from the large screen to the small screen like it would if it was switching monitors. How do I fix this?

  • Can you create a digital negative from a digital positive in Aperture?

    Hi everyone, I'm wanting to make some cyanotypes and have converted images to B&W, but need to covert these to digital negatives so I can have them printed on acetate. Is it possible to create a digital negative in Aperture? Thanks, Andrew

  • Setup table

    HI all,           why we dont have setup table for COPA, FI-SL, PS. Any of them can give valid reason