Do BPEL Dev Guide and Adapters Guide still on OTN?

Hi, all!
Recently, my system collapsed and I lost nearly all things on my hard disk, include BPEL developer's guide and Adapter guide.
I tried to found them on Oracle's Web site. After hours of searching, however, I still could not find these PDF files.
Would someone please tell me where these files are located or where I can download them? Thank you very much!
William.

Try this
http://www.oracle.com/technology/products/ias/bpel/htdocs/1012_support.html

Similar Messages

Question on Passivation / Activation example in Dev Guide

Adf 11g
Hello
I'm loading some values into the session UserData in my application module PrepareSession.
As I understand things I need to passivate/activate this information.
However the example in the Fusion Dev Guide on page 39-19 for the passivation
seems to be missing the caller to super.passivateState.
Is this correct ?
Best Regards
Paul

Surprisingly, no. The superclass method is basically a no-op. This method isn't involved in passivating the standard transactional and non-transactional state; it's just for custom data. Standard passivation takes place in passivateState(int, byte[], int).

Oracle 10g BPEL developers guide

Hi,
I am new to thw world of oracle 10g.I urgently need the developer's guide for BPEL 10g.
Please provide me the links for Oracle 10g BPEL developers guide.
You can also send me it, if you have it, to my email id: [email protected]
Thanks & Regards ,
Anuradha

Hi,
10g SOA Guide link is as below
http://docs.oracle.com/cd/B31017_01/core.1013/b28764/toc.htm
Complete 10g SOA Guildes of different versions is below
http://www.oracle.com/technetwork/middleware/soasuite/documentation/soasuite10g-161343.html
Best Practice guide is here.
http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.
Thanks,
Vijay

BPEL DEV and TEST Environment

Hello All,
I have situation with a client. The Client wants to install a BPEL DEV and TEST environment on one Server Instance and One Database Instance.
I know we can have multiple App Server Instances on a single Physical Server.
But the question is about having just one Database Instance. Can multiple BPEL schemas reside on same database with different schema names like orabpelDEV and orabpelTEST? Can the default schemas names orabpel, oraesb be renamed for different environment? If so how do I do it?
Any other suggestions is appreciated.
Thanks,
Abhay.
PS: BPEL 10.1.2 is being used with MID TIER Installation

In the documentation of the App Server in chapter 4 it's all about BPEL clustering:
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28980/clusteringsoa.htm
This can also apply to your environment. It is possible to have multiple BPEL PM server using one signle database and the same dehydration store. This helps you to increase the througput, scalibility and reailibility.
You can also implement multiple BPEL domains on a single BPEL server. In this way you can implement a OT(AP) environment.

Is it possible to keep all iTunes media on an external hard drive and not on my Mac Book and have ITunes still function?

Let me begin by saying I'm new to the Mac world as well as to the realm of online forums so I apologize if this is a question that was already asked and/or if it is a very noobish question...
But anyway, I just recently got the new Macbook Pro 15" with RD and I am curious if I can keep all of my Itunes media on an external hard drive without keeping any of it on the Macbook itself and have Itunes still function (when the HD is connected of course). I am trying to keep the computer memory clutter free and not fill it up with music and stuff so I want to keep all of my media on a 1T Buffalo external hard drive so the computer stays like brand new for a long time..Right now I have about 5G worth of music on my hard drive and I thought it was only on the hard drive and I just recently found out that it is also within the music folder on the computer itself. Any thoughts? Sorry if it is an odd question, I can try to rephrase the question if need be. Any tips or advice is greatly appreciated, Thanks!

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the iTunes Library.itl file in the moved iTunes folder.
If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
Longer answers if for any reason you do not think all library files are inside your iTunes folder (changed preferences settings at some point):
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168
2011 ilounge article: Transferring your iTunes library - http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/ - An article with good background information (similar to the links above), particularly if you are not sure your media files are all grouped for quick answer above. Unfortunately under the single term "transferring library" it describes two very different moves; relocating just your media (not really transferring your library and not recommended unless you really need this configuration), and relocating media+database (really your whole "library"). Make sure you understand the difference before electing to move only media.

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

One speaker of my i phone 4s does not working any more and my phone still new ?

One speaker of my i phone 4s does not working any more ? and it s still new !

There is only one speaker, other side is microphone. You
may wish to download and become familiar with the user guide.
It is a link in Safari on your iPhone, you can download the user
manual after you download iBooks app, or you can find it here:
http://support.apple.com/manuals/#iphone

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore

HT201444 4005 will appear in the recovery system hardware cause it? I have tried to replace numerous devices and cables, but still reported 4005.

4005 will appear in the recovery system hardware cause it? I have tried to replace numerous devices and cables, but still reported 4005.

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

How to set up DEV, TEST and PROD environment?

We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

URGENT - BPEL PM server and IE crash after re-installing jre - HELP

URGENT
After re-installing jre 1.5 update 3, still BPEL process manager and IE both crash when I click on the deployed process from the dashboard ..
Please help.
Thanks

bpel is NOT certiefied with java 1.5, and if you look at the start script for the server we take the java_home so setting that back to the old one should do it ..
thx clemens

Any way to start up a new iPad without using a pc that has iTunes? My pc was just stolen and I am still in Europe.

Any way to start up a new iPad without using the pc that has iTunes loaded. My pc was stolen in Italy and I am still in Europe.

So you don't have the cords I assume and the battery is dead? If you already installed songs, apps and other stuff via itunes you should be fine. Just buy or use the cords you received. You may need to buy the electrical adapters for EU connections.
Sorry to hear about the PC.
Brian

Dunning report difference in dev,testing and prod server in sap

Hi all..
we are facing a problem while executing the tcode f150 in dev,tsting and production server.
while giving the same run on and identification,the different parameters are coming and the status is geting changed.
in ker,the process is getting compelted,in testing the process is getting sceduled,complete but getting the status as"process completed but job deleted".
and in production,the status like testing server is coming but some tabs(from the too bar where delete,etc lies)are not getting to see,its not showing up.
please tell me if we can check it through some tcodes,or eliminate the eorr.
we are not able to locate the cause behind.thanks in adv.

Hi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy

Do BPEL Dev Guide and Adapters Guide still on OTN?

Similar Messages

Maybe you are looking for