Do changes in the unnested sequence get reflected in the nested sequence?

I frequently work with multicam sequences and am trying to rid the audio tracks of delays between them. Even after syncing, a frames difference is audible as room sound. I know I can sync them tighter if I use the waveform. But I was wondering if I do this after I've nested the tracks, if this gets reflected in the nested tracks?

Yes.
From the help: "A nested sequence always represents the current state of its source. Changing the content of the source sequence is reflected in the content of nested instances. Duration is not directly affected."
Adobe Premiere Pro Help | Create and change sequences

Similar Messages

Track the changes in the entries of the table

Hi,
How to c when and by whom the stnadard table has been modified.
Through SPRO some changes are done which are getting reflected in a standard table.
Though Log data changes in the technical settings of the Table in se11 is checked, im not able to c the changes using the tcode scu3.It displays "No logs Found" .
I tried to search the tables CDHDR and CDPOS,but of no use.
Please give some inputs in this regard.
Thanks in Advance.
Dharani.

Dharani,
Just some additional info:-
Open the table in SE11.
go to Utilities in the Menu bar
click onVersions- versions management
You will be able to see the current active version which is indicated by a tick mark in the extreme left.
Down that you will be able to see the previous version
Now select this previous verion.(i mean tick it).
press f8 or the button with two down arrows to compare.
In this way you will be able to see even the modification too which are highlighted.
The same applies to programs in se38 too.
K.Kiran.

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Changing the report in one client , it is getting reflected in other client

Hello experts,
We are having one development system(EID) in which we are having two clients.One is development client(100) and one is sandbox client(710).We are having repository object like report.We are changing this report in EID 710 and it is getting reflected in EID 100.Now we want that once we changed this report in EID 710 it shld not get reflected in EID 100.We want to parallely work on this report.We tried with client change option "no changes to cross client customizing object" but it is not working.Can you plz suggest something.

Hi,
you can not do like this...
if you want to work parallely copy the same report to $temp program. then you can work parallery on both.
Regards,
Satya.

Changes getting reflected as per the"version labels" Functionality

Hi,
We have a requirement , in which we need to update the owner ship details and the construction changes , which should get reflected in the version labels when we pass the changes to the update API.
Please let me know in case of any pointers on the above functionality.

Hi,
This issue is resolved
Thanks & Regards
Ravi

Chnages in the Graph properties are not getting reflected in the Browser.

Hi,
I have made some changes in the Graph properties in web template,
Eg. : 1. change in color of a series for a columnar type graph
2.change in the Text properties of Graph Series..
When I save the template and try to run in the Browser, these changes are not getting reflected.
Can anybody help me in this aspect ?
Thanks.
Regards.
Amol Bade

Same here :´(
Thanks In Advance
Juan

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

Reg: View changes not getting reflected

Hello All,
I made some view changes like field mapping for the Family Dependents view.
I Created the Activity and deployed using NWDI but the changes are not getting reflected.
Please assist me in resolving the issue.
What might have gone wrong? and how to solve the problem.
Thanks in advance for the time.
Regards,
Pramod

The issue is with the activities queued up in TCS Deployer.
Rerun the TCS deployer and the issue is solved.
Thanks,
Pramod

If i made any changes for one employee means it get reflect for others

Dear friends..
I am Abaper, i am in Support phase, i am facing one HR issue. kindly give me some idea to solve.
i have 2 employee number 2025 (VIJAYAN.M) and 2925 (VIJAYAN.M). in this both case employee name is same..
if i made any changes for employee 2025 infotype (for eg bank details) means, 2925 also get reflect the same changes vice versa..
Kindly give me some idea
Regards
Deva

Hi! Deva,
As you are ABAPer , and if you are doing it through some programing , then you must have getting same problem for all those employees who have similarity in their name or other,
so, please check or debug what criteria you have given for search ,for changing/updating bank key field,
check, it should be perner base not name base or any other.
Please check and revert so that we try to resolve.
Check one thing that is it only problem with bank key any other infotype also.
*Sneha.

When does an object gets refreshed, if its state has changed in the cache?

Do I have to use transactional reads for an object to get the changes done
by another web application ?
Thanks
Wolfgang

Hi Marc,
I have a shop system comprised of two web applications where one is for
maintaining the shop and the other for using the shop. When I do changes
to the shop from the one webapp they do not show up in the second, unless
I call refresh. Also, I have to switch off the cache, it seems and do a
flush on the changed objects. There are some questions now:
a) when I call refresh, is the complete state reread regardless whether
there have been changes or not or does it know, when the state has not
changed in the DB ? it is a performance question, I guess.
b) can I use transactional reads to do the refresh automatically ?
c) I noticed that refresh does not do a deep refresh of all the objects
referenced by the one to be refreshed. Is there a way to do this or do I
have to go thru all the objects ?
I asked some questions some time ago in another thread, which might refer
to. I am sorry, if I am not clear enough.
Best regards
Wolfgang
Marc Prud'hommeaux wrote:
Wolfgang-
I take the question to mean that you are wondering how you can refresh
the state of a persistent instance to reflect changes in the data store.
If that is the case, then you can just call
PersistenceManager.refresh(ob) on the object, and the newer values will
be obtained.
If that doesn't help, can you clarify the question a little?
In article <cj7ris$mhr$[email protected]>, Wolfgang Kundrus wrote:
Do I have to use transactional reads for an object to get the changes done
by another web application ?
Thanks
Wolfgang
Marc Prud'hommeaux
SolarMetric Inc.

[svn] 3839: Update the channel url to reflect the change in the runtime channel

Revision: 3839
Author: [email protected]
Date: 2008-10-23 07:42:37 -0700 (Thu, 23 Oct 2008)
Log Message:
Update the channel url to reflect the change in the runtime channel
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-manual/ajax/messaging/TextMessageRuntimeDest.html

Many ways to do this. The easiest is to have a method in one of your classes that reads the data from the database and creates all the proper structure under a RootNode and then returns that RootNode.
Whenever you want to refresh the tree, just call that method to recreate the root node (and all the underlying structure/nodes) and then re-set the root node of your tree model using the setRoot() method. That will cause it to refresh the display given the new root node.
Once you have that working, you can get fancier and make it more efficient (only updating/firing events for the nodes that actually changed, etc).

Reflecting the XML Data Changes in the online swf

Hi pals,
I am accessing an xml file which is in the server
continuously with in the distinct time intervals from my swf in an
online page.
If I make any change in the xml data it’s not
reflecting my online page because it’s accessing the xml file
from offline content.
How to avoid this? I want my page to be reflected immediately
when I make any change in my xml file.
Is there any wawy to clear the offline contents in
ActionScript or ASP?
*I had given the full server path to load the xml file in my
ActionScript.
Thx in advance... - ****

Hi,
just add a changing variable to the URL of the xml file:
xml.load("data.xml?foo="+getTimer());
That way, the URL is never the same, so the xml gets loaded
again every time. You can't test this movie locally anymore, as it
throws file not found errors, but with a server it's working fine.
cheers,
blemmo

How to make sure the Live cache information is getting reflect in the bex?

Hi All,
When the user enters some data in the planning book as soon as he saves it. It should be getting reflected in the cube isnt it? when i run the query it doesnt get reflected?
What is the technical settings should i do ? to reflected those changes in apo 3.5 verison.?
Thanks
Pooja

Hi Pooja, Rafael,
You can actually have a bex report with life data.
For that you need to use a remote cube, and not a basic one.
On comment though: you access only the information stored in the live cache, so for example you will not get the projected stock easily.
By default the projected stock is not stored; but even if you sotre it in a time series key figure, you still need to run the calculation... so any changes in order will not be reflected untill the next sotck calculation...
So to get the projected stock real time is more complex and required some abap coding... to get the the order real time is quite easy to do with remote cube
Good luck
Julien

In version 3.6 I can not open a website link from original page, I keep getting a new window that is blank and asking me to put in a web address. What has changed with the new version?

When on a page if I click on a web link I get a new window that is blank and asks me enter a web address. This started happening with the new 3.6 version. It seems to have something to do with what I choose for the location in my privacy settings as the window changes with each setting but I still cannot get to the new site. Any ideas? I have no problem with this in IE and I have to keep opening IE when I encounter the problem on Firefox which is annoying.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Do changes in the unnested sequence get reflected in the nested sequence?

Similar Messages

Maybe you are looking for