Do I have control over "USE flags" when compile from source

I have  used Gentoo and like it's system specific customizations, but am looking for something a slight bit easier to maintain.  I noticed that Arch also compiles as part of the installation.  Do I have control over the system wide compile setting in order to customize the builds similar to what is done is Gentoo?  Or, is the pacman process a "one size fits all" installer without customizations, for such things as architecture, with or without certain extensions...
Thanks for your info.  This looks like the distro for me, but am researching first.

It's a one-size-fits-all approach for the official binary repos and many weird and wonderful things can be found in the AUR or unofficial user repos. You can also use ABS to alter the configuration yourself, but you would have to edit PKGBUILDs for every package you want to change (e.g. add '--enable-foo') as Arch doesn't use the USE flags.
Official Arch packages support only i686 and generic 64-bit architectures, but e.g. linux -ck kernel https://bbs.archlinux.org/viewtopic.php?id=111715 is provided optimized for many specific processors.

Similar Messages

  • How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

    I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address.  Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

    Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder.  That is what you need to do if you don't want your site name to be included in yoru url.
    It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
    Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
    It really isn't rocket science!

  • Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    4. Reset the System Management Controller.
    5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • I'm not able to close the filefox or any tab in Firefox 28.0 v for sometime. It seems that i don't have control over it.

    I'm not able to close the filefox or any tab in Firefox 28.0 v for sometime. It seems that i don't have control over it. Also if i'm watching any video not able pause it or move forward or use full screen.
    While as i'm opening the same like in IE itz working fine.
    I'm using firefox from past 5 years. Can u fix it as i temporary moved to chrome.

    hello, i'm not sure what filefox is - can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • HT1386 How do I copy music from an old iPod?  Why do you have to make things so difficult?  These are my files that I paid for but once I put them on your devices, I no longer have control over them.  I've wasted so much time on these stupid problems.

    How do I copy music from an old iPod?  Why do you have to make things so difficult?  These are my files that I paid for but once I put them on your devices, I no longer have control over them.  I've wasted so much time on these stupid problems.  I used to be able to do this until you "improved" things.

    Thanks, Deggie. I thought Apple would see my feedback.  I would just like to know if there is a simple way to copy just a few music files from an old iPod.  I saw instructions on how to copy all of them from the iPod but it was complicated and I really didn't want to copy all the songs.  I guess I could delete all the songs but the ones I want to copy then go through that process again.  Do you know how to back up music to my computer?  I don't want to have to go through this again and possibly lose music.

  • I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud

  • Java.lang.NoClassDefFoundError when compile SQLJ source file

    Always got error message java.lang.NoClassDefFoundError: sun/io/CharToByteConverter
    when using sqlj to compile SQLJ source file.
    The CLASSPATH (partial) .:$ORACLE_HOME/sqlj/lib/translator.zip:$ORACLE_HOME/sqlj/lib/runtime.zip
    I am able to compile the demo TestInstallCreateTable.java and TestInstallJDBC.java but not TestInstallSQLJ.sqlj in the same directory.
    I am using Oracle 8.1.6 R2 client in Linux Intel on Red Hat 6.0. Can anyone explain why this happened ?

    From the forthcoming new version of the SQLJ FAQ:
    "NoClassDefFoundError: sun/io/CharToByteConverter"
    (This is likely a general configuration issue, not something specific to your code.)
    Running sqlj results in the following error message.
    java.lang.NoClassDefFoundError: sun/io/CharToByteConverter
    at sqlj.tools.Sqlj.initializeErrors(Sqlj.java:519)
    This happens if you are running under a JRE environment, and not a full JDK environment. You need to download and install a full JDK environment. Note that the Oracle
    database installation will only set up a Java Runtime Environment. Oracle does not distribute the Java Development Kit - you have to get it from http://java.sun.com
    If that did not help, you'd need to give us a fuller picture of your environmnet (JDK versions, PATH, CLASSPATH settings, etc.).
    Thanks!

  • HT204053 Is there a limit to the number of devices I can have on one account.  I have all two of my kids ipods, plus, mine, an ipad, and my iphone, and need to add one more.  I do this so that I have control over and can see what they are downloading.

    Is there a limit to the number of devices I can have on one account.  I have been putting my kids' ipods on my account so that I can manage their downloads, and control it.  Then I just create playlists for them specifically.  Now, adding another one for my youngest, but have no idea if there are limits. 

    Well the part about putting songs in the "iTUnes Music" folder I only brought up because it seemed you liked things very organized. You could use iTunes to so all the organizeing. Plus once you add something to the iTUnes library, if you change ANYTHING about it in windows explorer, like its name, change the name of the folder its in or move it to another folder, iTUnes "Looses Track" of it. Its not like other programs that "Watch" files and folders for changes outside its "iTUnes Music" folder
    But to have iTUnes auto search, you have to delete a hidden pref file. After doing this, when you open iTUnes again it will throw up a setup wizard, just like its the first time ever installing it. Its in this wizard where you get your ONLY chance to have iTUnes auto search and add files from the system. Just goto the link below and follow Scott P's steps
    http://discussions.apple.com/message.jspa?messageID=607357
    Also since your new to the ipod, you my want to check out the "iPod 101" section so you can learn the ropes of everything
    http://www.apple.com/support/ipod101/

  • Using fonts when launching from JNLP

    Hello,
    I followed the directions in this link http://fxexperience.com/2010/05/how-to-embed-fonts/ and was able to add and use fonts in my javafx program when launched from Netbeans. But when I try to launch from JNLP, the fonts do not show up (the text shows up as Arial).
    Is there something special I need to do to access the fonts in the jar and utilize them?
    As the link directed I created a fonts folder in my src folder where I store all the .ttf file, and created a fonts.mf file in META-INF where I map a name to the font file. Works fine when launching from netbeans.
    thanks in advance for your help
    jose

    I've found the problem! It's the timestamp for the JNLP file. But unfortunately I can't figure out the workaround as yet.
    To explain the problem it would be best to start with my application's installation procedure:
    The applcation is installed by way of CD (using javaws -import) as downloading an 8mb jar file over dialup is unwieldy. Subsequent updates are retrieved from the server. Jardiffs are sent back to the webstart client so updates over dialup becomes manageble.
    The application jar file in the CD is version 1.0. Let's say the server is now at version 1.3 with the timestamp 2005-10-01 00:00:00.
    The user installs the application using the CD today which gives his JNLP file the timestamp of 2005-10-03 00:00:00.
    When the application is started, it calls the server to check for updates. Although the JNLP file returned from the server specifically states that the current version is at version 1.3 Java Web Start insists on using the timestamp to perform the comparison first.
    Since the timestamp of the JNLP file in the user's pc is dated later than the JNLP file in the server, Java Web Start ignores the version checking and assumes that the application in the server is the latest and greatest.
    Has anyone encountered a similiar situation? The only solution I can think of is to hack the JNLPDownloadServlet to return a date that's way in the future so that Java Web Start picks up the changes... sigh.
    Is it possible to disable the timestamp checking for the JNLP files? As again, help is mucho appreciated and there are 10 duke dollars at stake too :)

  • Keep getting "required file in use" error when importing from a disc

    Installed 12.0.1 this weekend and now cannot import songs from a disc (have tried on several different discs). I keep getting the error message that "Error occurred while converting the file. The required file is in use). Have rebooted several times with no improvement.  There doesn't seem to be any problem playing anything off my existing library, but I also get failure messages when purchasing from Amazon. Anyone have ideas?

    Any Suggestions?
    Dmitry

  • Overly Huge Files when Importing from DVC tape to IMovie

    When importing from my Canon ZR 600 60 minutes of tape equals 16.1 Gigs
    I am looking for what I am doing wrong I have 10 hours of Disney I would like to turn into 5 dvd set not 15 dvd set. Any help would be greatly appreciated.

    Hi Gregory
    About 13-14 Gb per hour miniDV tape movie is as iMovie (QT) works. When
    it is stored down to a DVD disk it will be converted into a working format for
    DVD disks and that will mean that 1 hour will take up a DVD disk in max
    quality and 2 hours in slightly less quality. iDVD doesn't care about how
    many Gb Your movie takes up in iMovie or FinalCut JUST the amount of minutes
    this includes the DVD menues that also need spaces.
    55 min movie and 5 min for menues is OK in max qual.
    115 min + 5 for slightly less.
    You also need to think about how much free space there is on Your hard disk.
    After Your 115 min movie is ready to go to iDVD there should be about 20Gb
    free space left or iDVD will run into problems.
    Yours Bengt W

  • Can any solve this exception when compiling the source code

    when i compile the source code . i am getting the following exceptions
    1.java.lang.classnotfoundException and javax.jnlp.UnavailableServiceException
    BadFieldException[ The field <jnlp>codebase has an invalid value: $$context/adempiereHome,$$context/adempiereHome]
         at com.sun.javaws.jnl.XMLUtils.getAttributeURL(Unknown Source)
         at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.Main.launchApp(Unknown Source)
         at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
         at com.sun.javaws.Main$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    looks like you're using java web start to run app. am i right? personally i don't have much expertise in this area but i've had to deal with it before, essentially what your problem looks to me is that the codebase in your jnlp file is set up wrong
    under my definition (vague) the codebase points to where java should look at to find your files and run them
    do a search and read more about running apps. through web start if that's your case

  • Error FRM-91500 when compile from remote host

    Dear all,
    I have a problem when compiling forms from remote using 'frmcmp.sh'. It creates error :
    "FRM-91500: Unable to start/complete the build."
    and when I try to compile from remote host using 'frmcmp', it creates error:
    "frmcmp: error while loading shared libraries: libjvm.so: cannot open shared object file: No such file or directory"
    The problem is also occured when I use vnc, ssh, telnet. So I can't complie forms when I login from remote host.
    But,
    the problem doesn't occured if I compile forms by login FROM SERVER directly. There's no firewall between me and the server, network connection is good, and I already try some advice from this forum using:
    export ORACLE_TERM=vt220
    export DISPLAY=202.181.18.31
    But It still doesn't work. I try export DISPLAY using my local Ip-address, using my gateway ip-address, but none of them works. Please help me solve this problem so I can compile from remote host
    The server specification:
    Pentium 4
    RAM 1 GB
    OS Enterprise Linux AS release 4 (October Update 4)
    server IP adddress:x.x.x.x
    with product:
    Oracle DB 10g
    Oracle Apllication Server 10gR2
    My own IP address:192.168.13.34
    server see me as : x.x.x.x
    Regards,
    firman

    your DISPLAY isn't correct,
    it should be something like
    export DISPLAY=203.81.184.30:0.0
    where 0.0 stands for your local display and the virtual screen on it ..
    (or something like that ... )
    in any case I first would check the X-Session using some standard X-application
    like xterm or xclock
    as long as they don't work, your compile will fail
    hope that helps
    Volker

  • AUR docker-git issue when compiling from i686 machine

    Hello,
    From an i686 machine (old laptop) i've just tried to compile the AUR docker-git package source but then came to an error.
    I would like to understand if i missed something.
    Thanks.
    $ makepkg -s
    ==> Making package: docker-git 1:1.5.0.dev.13153.99ca215-1 (Sun May 10 12:32:22 RET 2015)
    ==> Checking runtime dependencies...
    ==> Installing missing dependencies...
    [sudo] password for op:
    resolving dependencies...
    looking for conflicting packages...
    Packages (1) bridge-utils-1.5-2
    Total Download Size: 0.01 MiB
    Total Installed Size: 0.05 MiB
    :: Proceed with installation? [Y/n]
    :: Retrieving packages ...
    bridge-utils-1.5-2-i686 13.1 KiB 570K/s 00:00 [#######################################################################################] 100%
    (1/1) checking keys in keyring [#######################################################################################] 100%
    (1/1) checking package integrity [#######################################################################################] 100%
    (1/1) loading package files [#######################################################################################] 100%
    (1/1) checking for file conflicts [#######################################################################################] 100%
    (1/1) checking available disk space [#######################################################################################] 100%
    (1/1) installing bridge-utils [#######################################################################################] 100%
    ==> Checking buildtime dependencies...
    ==> Installing missing dependencies...
    resolving dependencies...
    looking for conflicting packages...
    Packages (4) perl-error-0.17023-1 btrfs-progs-4.0-1 git-2.4.0-1 go-2:1.4.2-2
    Total Download Size: 52.76 MiB
    Total Installed Size: 335.07 MiB
    :: Proceed with installation? [Y/n]
    :: Retrieving packages ...
    btrfs-progs-4.0-1-i686 541.2 KiB 25.0K/s 00:22 [#######################################################################################] 100%
    perl-error-0.17023-1-any 18.4 KiB 65.6K/s 00:00 [#######################################################################################] 100%
    git-2.4.0-1-i686 4.2 MiB 25.4K/s 02:49 [#######################################################################################] 100%
    go-2:1.4.2-2-i686 48.0 MiB 27.7K/s 29:35 [#######################################################################################] 100%
    (4/4) checking keys in keyring [#######################################################################################] 100%
    (4/4) checking package integrity [#######################################################################################] 100%
    (4/4) loading package files [#######################################################################################] 100%
    (4/4) checking for file conflicts [#######################################################################################] 100%
    (4/4) checking available disk space [#######################################################################################] 100%
    (1/4) installing perl-error [#######################################################################################] 100%
    (2/4) installing git [#######################################################################################] 100%
    Optional dependencies for git
    tk: gitk and git gui
    perl-libwww: git svn
    perl-term-readkey: git svn
    perl-mime-tools: git send-email
    perl-net-smtp-ssl: git send-email TLS support
    perl-authen-sasl: git send-email TLS support
    python2: various helper scripts
    subversion: git svn
    cvsps2: git cvsimport
    gnome-keyring: GNOME keyring credential helper
    (3/4) installing go [#######################################################################################] 100%
    The "liteide" package provides an IDE for editing and building Go projects.
    Example use of the "go" tool:
    mkdir ~/go
    export GOPATH=~/go
    export PATH=$PATH:~/go/bin
    go get golang.org/x/tour/gotour
    Optional dependencies for go
    mercurial: for fetching sources from mercurial repositories
    git: for fetching sources from git repositories [installed]
    bzr: for fetching sources from bazaar repositories
    subversion: for fetching sources from subversion repositories
    (4/4) installing btrfs-progs [#######################################################################################] 100%
    ==> Retrieving sources...
    -> Cloning docker git repo...
    Cloning into bare repository '/home/op/admin/build/docker-git/docker'...
    remote: Counting objects: 123777, done.
    remote: Compressing objects: 100% (364/364), done.
    remote: Total 123777 (delta 227), reused 2 (delta 2), pack-reused 123409
    Receiving objects: 100% (123777/123777), 69.26 MiB | 15.00 KiB/s, done.
    Resolving deltas: 100% (81453/81453), done.
    Checking connectivity... done.
    -> Found docker.service
    -> Found docker.install
    -> Found docker.conf
    ==> Validating source files with md5sums...
    docker ... Skipped
    docker.service ... Passed
    docker.install ... Passed
    docker.conf ... Passed
    ==> Extracting sources...
    -> Creating working copy of docker git repo...
    Cloning into 'docker'...
    done.
    ==> Starting pkgver()...
    ==> Updated version: docker-git 1:1.7.0.dev.15438.340fd14-1
    ==> Starting prepare()...
    ==> Starting build()...
    # WARNING! I don't seem to be running in the Docker container.
    # The result of this command might be an incorrect build, and will not be
    # officially supported.
    # Try this instead: make all
    SIGILL: illegal instruction
    PC=0x81f4ea9
    goroutine 1 [running, locked to thread]:
    math.init·1()
    /usr/lib/go/src/math/pow10.go:34 +0x19 fp=0x1872ff4c sp=0x1872ff48
    math.init()
    /usr/lib/go/src/math/unsafe.go:21 +0x3f fp=0x1872ff50 sp=0x1872ff4c
    strconv.init()
    /usr/lib/go/src/strconv/quote.go:455 +0x45 fp=0x1872ff6c sp=0x1872ff50
    go/parser.init()
    /usr/lib/go/src/go/parser/parser.go:2462 +0x4a fp=0x1872ff78 sp=0x1872ff6c
    main.init()
    /usr/lib/go/src/cmd/go/zdefaultcc.go:6 +0x45 fp=0x1872ffcc sp=0x1872ff78
    runtime.main()
    /usr/lib/go/src/runtime/proc.go:58 +0xbd fp=0x1872fff0 sp=0x1872ffcc
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1 fp=0x1872fff4 sp=0x1872fff0
    goroutine 2 [runnable]:
    runtime.forcegchelper()
    /usr/lib/go/src/runtime/proc.go:90
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    goroutine 3 [runnable]:
    runtime.bgsweep()
    /usr/lib/go/src/runtime/mgc0.go:82
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    eax 0x1870a0c0
    ebx 0x856f650
    ecx 0x187000a0
    edx 0x2b7f865a
    edi 0x7
    esi 0x2b68
    ebp 0x1870a0c0
    esp 0x1872ff48
    eip 0x81f4ea9
    eflags 0x10206
    cs 0x73
    fs 0x0
    gs 0x33
    SIGILL: illegal instruction
    PC=0x81f4ea9
    goroutine 1 [running, locked to thread]:
    math.init·1()
    /usr/lib/go/src/math/pow10.go:34 +0x19 fp=0x1872ff4c sp=0x1872ff48
    math.init()
    /usr/lib/go/src/math/unsafe.go:21 +0x3f fp=0x1872ff50 sp=0x1872ff4c
    strconv.init()
    /usr/lib/go/src/strconv/quote.go:455 +0x45 fp=0x1872ff6c sp=0x1872ff50
    go/parser.init()
    /usr/lib/go/src/go/parser/parser.go:2462 +0x4a fp=0x1872ff78 sp=0x1872ff6c
    main.init()
    /usr/lib/go/src/cmd/go/zdefaultcc.go:6 +0x45 fp=0x1872ffcc sp=0x1872ff78
    runtime.main()
    /usr/lib/go/src/runtime/proc.go:58 +0xbd fp=0x1872fff0 sp=0x1872ffcc
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1 fp=0x1872fff4 sp=0x1872fff0
    goroutine 2 [runnable]:
    runtime.forcegchelper()
    /usr/lib/go/src/runtime/proc.go:90
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    goroutine 3 [runnable]:
    runtime.bgsweep()
    /usr/lib/go/src/runtime/mgc0.go:82
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    eax 0x1870a0c0
    ebx 0x856f650
    ecx 0x187000a0
    edx 0x58e0ae9c
    edi 0x7
    esi 0x2b68
    ebp 0x1870a0c0
    esp 0x1872ff48
    eip 0x81f4ea9
    eflags 0x10206
    cs 0x73
    fs 0x0
    gs 0x33
    SIGILL: illegal instruction
    PC=0x81f4ea9
    goroutine 1 [running, locked to thread]:
    math.init·1()
    /usr/lib/go/src/math/pow10.go:34 +0x19 fp=0x1872ff4c sp=0x1872ff48
    math.init()
    /usr/lib/go/src/math/unsafe.go:21 +0x3f fp=0x1872ff50 sp=0x1872ff4c
    strconv.init()
    /usr/lib/go/src/strconv/quote.go:455 +0x45 fp=0x1872ff6c sp=0x1872ff50
    go/parser.init()
    /usr/lib/go/src/go/parser/parser.go:2462 +0x4a fp=0x1872ff78 sp=0x1872ff6c
    main.init()
    /usr/lib/go/src/cmd/go/zdefaultcc.go:6 +0x45 fp=0x1872ffcc sp=0x1872ff78
    runtime.main()
    /usr/lib/go/src/runtime/proc.go:58 +0xbd fp=0x1872fff0 sp=0x1872ffcc
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1 fp=0x1872fff4 sp=0x1872fff0
    goroutine 2 [runnable]:
    runtime.forcegchelper()
    /usr/lib/go/src/runtime/proc.go:90
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    goroutine 3 [runnable]:
    runtime.bgsweep()
    /usr/lib/go/src/runtime/mgc0.go:82
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    eax 0x1870a0c0
    ebx 0x856f650
    ecx 0x187000a0
    edx 0x67b18e06
    edi 0x7
    esi 0x2b68
    ebp 0x1870a0c0
    esp 0x1872ff48
    eip 0x81f4ea9
    eflags 0x10206
    cs 0x73
    fs 0x0
    gs 0x33
    ---> Making bundle: dynbinary (in bundles/1.7.0-dev/dynbinary)
    SIGILL: illegal instruction
    PC=0x81f4ea9
    goroutine 1 [running, locked to thread]:
    math.init·1()
    /usr/lib/go/src/math/pow10.go:34 +0x19 fp=0x1872ff4c sp=0x1872ff48
    math.init()
    /usr/lib/go/src/math/unsafe.go:21 +0x3f fp=0x1872ff50 sp=0x1872ff4c
    strconv.init()
    /usr/lib/go/src/strconv/quote.go:455 +0x45 fp=0x1872ff6c sp=0x1872ff50
    go/parser.init()
    /usr/lib/go/src/go/parser/parser.go:2462 +0x4a fp=0x1872ff78 sp=0x1872ff6c
    main.init()
    /usr/lib/go/src/cmd/go/zdefaultcc.go:6 +0x45 fp=0x1872ffcc sp=0x1872ff78
    runtime.main()
    /usr/lib/go/src/runtime/proc.go:58 +0xbd fp=0x1872fff0 sp=0x1872ffcc
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1 fp=0x1872fff4 sp=0x1872fff0
    goroutine 2 [runnable]:
    runtime.forcegchelper()
    /usr/lib/go/src/runtime/proc.go:90
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    goroutine 3 [runnable]:
    runtime.bgsweep()
    /usr/lib/go/src/runtime/mgc0.go:82
    runtime.goexit()
    /usr/lib/go/src/runtime/asm_386.s:2287 +0x1
    eax 0x187380a0
    ebx 0x856f650
    ecx 0x187000a0
    edx 0x665138d8
    edi 0x7
    esi 0x2ba8
    ebp 0x187380a0
    esp 0x1872ff48
    eip 0x81f4ea9
    eflags 0x10206
    cs 0x73
    fs 0x0
    gs 0x33
    ==> ERROR: A failure occurred in build().
    Aborting...
    $
    Last edited by Rone (2015-05-11 16:15:06)

    I think the links i gave before about "patching" only one line of git source code to allow build/compile the source for 32bit processors, won't apply exactly here, because the code has evolved and is not the same. But possible that it can continue to be as simple as reported by the articles pointed above, to compile the source code on 32 bit architecture.
    When searching into the git clone directory from which executed file came the WARNING message - short output pasted below but i also gave the full output before -  printed on the output, i saw that it was coming from the file  ./src/docker/hack/make.sh
    ==> Starting pkgver()...
    ==> Updated version: docker-git 1:1.7.0.dev.15438.340fd14-1
    ==> Starting prepare()...
    ==> Starting build()...
    # WARNING! I don't seem to be running in the Docker container.
    # The result of this command might be an incorrect build, and will not be
    # officially supported.
    # Try this instead: make all
    SIGILL: illegal instruction
    But starting from there, by now, i don't know what to do.
    Last edited by Rone (2015-05-11 18:09:04)

Maybe you are looking for