Do I install both CS5 and CS6 upgrade or just CS6?

PC fried by lightning. My CS5 was updated with CS6 upgrade. Must I install both or can I only install CS6?
Thanks
Callie

You should only need to install CS6.  As part of the activation process after your CS6 serial number is accepted you will be asked to identify the qualifying version (CS5) and enter its serial number

Similar Messages

  • How can I force Indesign cs5 to open cs5 documents when both cs5 and cs6 is installed?

    We are using Indesign with cs5-specific plugins. Due to that we have both cs5 and cs 6 installed on our workstations. Trying to assign cs5 documents (INDD) to cs5, windows refuses to let us choose indesign.exe (cs5). How can we force cs5 to be the chosen application for .indd?

    The best way is using Soxy:
    http://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • Do i have to install both pse6 and 11 on a new laptop..or is 11complete without 6?

    My old laptop crashed  and I need to install elements on a new one.  I had PSE 6 with an upgrade to 11.//do I need to install them both or does 11 overwrite 6?

    do i have to install both pse6 and 11 on a new laptop..

  • Problem with installing both 32 and 64bit Java7u45

    Hi all.
    For some reson we need to install Java7u45 because of an inhouse made application only runs on java7u45 32bit,
    Now to my issue, we hava about 200 windows7 x64 machines who need both 32 and 64 bit java7u45.
    If i install the 32bit the inhouse appliction works, but then other third party application will not run (SoapUI, Eclipse).
    If i install both 64 and 32 bit the inhouse application will not run, i get this error message "NativeSwing[1]: Caused by: java.lang.UnsatisfiedLinkError: Cannot load 32-bit SWT libraries on 64-bit JVM"
    In the Java Control Panel only the 64bit java shows up, and if i try to add javaw.exe from C:\program files (x86)\java\bin it will add the correct line, and i looks ok until i close the java control panel and open it, it will still only show the 64bit java.
    So is there anyway to change the default 64bit java to 32bit and make it stick?
    Thank you.

    panosk wrote:
    uwinkelvos wrote:This isn't GWT, is it?
    Hi, is there anybody using Eclipse and GWT in arch 64?
    I use Eclipse Galileo 64 bit and trying to use GWT I get the error "...wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch)..."
    Should I nstall bin32-jre from AUR and use it to start a 32 bit version of Eclipse? Is there another way using the 64 bit version of eclipse?

  • Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

    Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

    Apple recommends separate partitions: http://support.apple.com/kb/HT4722

  • Installing both Reader and Acrobat 0 Standard

    Is it possible to install both Reader and Acrobat 9 Standard on the same computer?
    I want to be able to make sure whatever I produce in Standard will work and open up in Reader or any other PDF viewer someone might use.

    Hi,
    I have both the reader and Pro on my computer, however, there are some issues with default actions, such as opening documents.
    Is there some kind of guide to setup both reader and Pro on the same computer, just have them do different functions?
    Thanks for your input!

  • Should I install both 64 and 32 bit photoshop on my Vista 64 bit?

    Should I install both 64 and 32 bit photoshop on my Vista 64 bit?

    Some plug-ins require the 32-bit version. If you are going to just use it as is, no plug-ins for devices, then th 64-bit version should be fine.

  • Install both 32 and 64 JVM on the same machine

    Hello
    I wanted to know if by installing both 32 and 64 JVM (on a 64 bit system, of course), would cause any damage. I have installed the 64 version, but Eclipse doesn't want to start at all, so i was hoping to make it work my installing a 32 bit version and making eclipse use it.
    I am not sure how this will affect everything, because i will be using Jboss and Glassfish.

    Then please post into the CodePlex issues
    You may want to contact https://www.codeplex.com/site/users/view/kevinidzi and ask for a side by side support
    Arthur My Blog

  • Problem with re install of CS5 and photoshop CC

    Hi fellow Adobe users\\i have a new pc and have tried to re install photshop CS5 - it wont install  - i have also tried to install photoshop CC trial and it also fails - cchas the code 6 andsays it did not install everything
    thanks for your help

    Jondibbs what specific error are you receiving?  You can find information on how to locate and interpret your installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.  Please feel free to post any specific errors you discover to this discussion.

  • Just installed Photoshop CS5 and cannot figure out tablet sensitivity...

    Hi everyone.
    Previously with my computer running Photoshop Elements 7, I had no problems using the brush tool with my Tooya Pro tablet. The harder I pressed, the thicker the line would become up to the full diameter of the brush selected.
    Just yesterday I installed Photoshop CS5 (wahoo!), and the brush works fine with the tablet- except there doesn't seem to be any pressure sensitivity. Clicking "Tablet pressure controls size" box on the top tool bar doesn't appear to do anything, and neither does setting the size jitter to "pen pressure" in shape dynamics in the brush menu.
    Does anyone know anything else I should try? I've gone back to PSE7 and found out it still works as it used to, but just for some reason it won't work right in CS5.
    Thanks for any advice!
    Additional details: running Windows 7 64 bit.
    I have tried the solutions in this troubleshooting section: http://help.adobe.com/en_US/photoshop/cs/using/WS7EE7587B-452F-4271-8252-898FCA43C27Ca.htm l#ionCTAAnchor

    Did you try it with the 32 bit version of Photoshop CS5?
    Normally both a 32 and 64 bit version are installed on an x64 system.
    -Noel

  • CS5 and Lion Upgrade--color change

    I am using CS5 on a Macbook and printing on an Epson Sylus Photo R2400. I recently upgraded to OSX 10.7 (from 10.58 if this matters). When I compare a photo that I printed before the upgrade with one printed after the upgrade (using the same paper and profile and the file has not been edited between printings), the one printed in 10.7 has a slight magenta cast (the original print has pastel greenish blues; the one printed from 10.7 is more greyish violet). The original print matches the calibrated monitor better as well. I am using photoshop to manage colors, and, as far as I can tell with the new driver, printer color management is turned off (this seems to happen when the settings are selected in the photoshop print window).
    I have read that there were potential issues with drivers, but I have cleaned out the Epson folder in my system library, reset the printing system, and reloaded the printer with newly downloaded drivers from Epson. None of this seems to change the output.
    It may be possible that the new Epson driver yields different color from the same file/profile combination, but this strikes me as unlikely.
    It may also be that there was some nozzle clogging in the original prints that, once cleared, has resulted in the color shift, but the number of consistent prints and timing of the shift makes this unlikely as well.
    I am tempted to get a custom profile for the printer to address the match issue, but if there is some software glitch that is causing the shift, am not sure this is the right solution either.
    Does anyone have any advice as to how to resolve this issue?

    I have CS4 and CS5 installed at present and have had no issues whatsoever, except a bit of slowness starting uo but I only have a 2.1ghz processor and 3GB Ram. But still a better startup and more solid platform than Snow Leopard, but do read the threads on auto-save/versions.
    http://kb2.adobe.com/cps/905/cpsid_90508.html
    Good luck

  • URGENT PLEASE HELP - Can I install BOTH panther and tiger?

    Hi,
    I recently upgraded to Tiger only now to find out that some software I use is only compatible with Panther. I really like the whole Tiger experience and am therefore very hesitant to switch back to Panther.
    I understand that I might be able to somehow partition my hard drive so that I am able to run both Tiger and Panther (I have no idea how to even go about doing this...I'm a bit technically unsavy).
    ANY help you may be able to offer is HIGHLY appreciated.
    Thanks guys (and gals)!

    To partition your hard disk, restart your machine from a Mac OS X install disk and open the Disk Utility when you are able to. Select your hard disk in the list of disks, click Partition, and set up the partition structure. Confirm that you want to partition the hard disk; doing this will erase everything currently on the hard disk. You will need to create one partition for each version of Mac OS X that you want to run; a Mac OS X boot partition must be in either Mac OS Extended, Mac OS Extended (Journaled), or UNIX file system format. More information is available in this article.
    (8988)

  • Why is my Photoshop CS4 not installing both 64 and 32 bit versions?

    Hello,
    I'm running Windows Vista Ultimate 64 bit.
    I purchased and downloaded Photoshop CS4 Extended and it installed as a 64 bit program. Now I need a 32 bit version also (for some Nik plugins), but the installer didn't install the 32 bit version (it would be in Program Files (x86). It should have installed both as a default.
    Also, I didn't change the default pathing as I know that can screw the install up.
    I ran the install program again and it runs through the complete install without giving me the Options Panel to select which version 64 or 32 (or both) to install.
    Should I completely uninstall PS and reinstall to see if I get the install Options Panel?  Other Ideas?
    Thanks!
    Chris

    "it is not possible to just install the 32 bit version without an uninstall?"
    It's a great idea, but I don't know how. I have the downloaded the PS CS4 file from Adobe that I used to originally install PS. I re-ran this install program and it reinstalled the same 64bit program that I already have; it never gave me any options as to which version to install.
    I'm think I'll just have to de-activate, uninstall, reinstall to get the PS install Options Panel.

  • Installing both Lion and Snow Leopard on my Macbook Air?

    Hey guys please help me out here. I upgraded to Mac OS X Lion the past week and while happy with the overall update, I have 1 big issue. I have a few PowerPC exclusive apps and since Lion dropped the PowerPC support, I am stranded with non working apps. So I need to create a partition and install Snow Leopard on my Mac.
    So a couple of questions....
    1) Do I need to install Leopard first and then Snow Leopard or can I directly install Snow Leopard on my Machine? I had bought Snow Leopard for 30$ and I am pretty sure at that time it asked for Leopard OS. I just want to run the apps, so if I have to go through the long route, then I'd prefer staying on Leopard.
    2) How much space should I allocate to the partition? The App which I want to run just takes about 1 GB of HDD space, so I am guessing 10GB will be enough for the thing or should I allocate more cause I don't wanna starve the mac from any virtual memory issue. The main reason I am asking is cause I have the 1st gen Air which only has a 80GB Drive and I really don't have much to spare, so please suggest accordingly.
    Please help me out here. And no there is no Intel Version of the App as it's been discontinued.

    Thanks for replying. I don't understand the last point. Why would I have to reinstall Lion back since I just want to use 2 partitions with 2 OS. Woudn't it give me an option at Booting if I keep CMD key pressed to boot from 2 drives like it did with Windows bootcamp partition?
    Quiet frankly, I just need to install the application for a week and then I plan to delete the entire partition, so I won't be extensively using it, so I guess allocating around 15GB would be sufficient. But this whole installing Lion back thing would be really annoying since I have already installed quiet a few apps and even my iPhone is now syncd with Lion... So don't want to go through the entire procedure of relocating my music and stuff again.

  • [SOLVED] Having trouble installing both Steam and Desura

    I've been trying to install these but both are apparently having the same issue, maybe it's a KDE problem (I'm using a KDE setup) or something?
    I get a message like for libpng12 which is needed for Desura:
    File /var/cache/pacman/pkg/libpng12-1.2.50-4-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
    For Steam I get this:
    File /var/cache/pacman/pkg/steam-1.0.0.45-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
    Then it asks if I want to delete it, and either choice prevents me from actually installing.
    EDIT: I ran these two commands and tried installing steam again and had no issues.
    pacman-key --populate archlinux
    then...
    pacman-key --refresh-keys
    Last edited by felixculpa (2013-12-07 21:16:06)

    I think it's a signature/keys issue, I deleted the gnupg key directory and refreshed the keys and synced and updated. Then when trying to install steam I had to import PGP keys, and the signatures are of "unknown trust." Then I still get a corrupted package message afterwards. I'm thinking I will just disable signature signing and then trying to install, then reenable signature signing afterwards... I'm a little wary of this because of possible security issues.
    EDIT: installs and making the package for Desura run fine with signature checking disabled but I wonder if there is some kind of security exploit thing going on with them?
    Last edited by felixculpa (2013-12-07 20:40:02)

Maybe you are looking for

  • Source List validity dates for MRP only

    Hi. Is there a way to do the following: Set purchasing view "source list required" so that the material must be purchased from ANY of the sources on the source list...  AND... Setup the source list so that there are no overlaps, and MRP sources from

  • Can't create BAM Sensor Action - XSD schema file exists

    Hi, In JDeveloper, I created some activity sensors and when I try to create a BAM sensor action it complains about the schema definition of the variable and that it should not be inline in the WSDL. The fact is that my BPEL process communicates with

  • IPhone Email attachments

    Hopefully this will help others also. I contacted Apple iPhone tech support and was switched to the second level support (some very knowledegable people there). I was asking about the inability of the iPhones to send or receive attachments. Currently

  • Mail app freezes upon opening after Mavericks install

    Following my installation of mavericks, apple mail app freezes upon opening. Windows do not open; program immediately begins "not responding." Having followed this with a force quit loop for a day, I installed airmail, a serviceable alternative, but

  • Copying an html file

    I wanna copy the contents of an html file(only the contents)in to a text file..this should be achieved thru a java program.. can any1 guide me??