Do i need an extreme base station if i have an airport express?

I just got an Apple ibook G4 laptop through a program at my school which is Airport ready. I'm not really that computer smart. At home we have 1 ethernet cord attached to a different computer but I want to set up a wireless connection in my room just for my laptop. Can I do that with just an airport express base station, or do I have to have a stationary one first? Would it be easier just to buy the extreme base station even though it costs more? Also, how does the express work? Do you just plug it into the wall, or does it have to be connected to some sort of phone jack, or what? Again, not computer smart at all. HELP!!!

bcbandtiger, Welcome to the discussion area!
Since an AirPort Express (AX) won't support a wired (Ethernet connected) computer, you can't solve your problem that way.
If your only goal is to create a wireless network for the laptop, you need either the AirPort Extreme base station (AEBS) or any other inexpensive 802.11b/g compliant wireless router. These will provide an Ethernet port for you wired computer and create the wireless network for your laptop.
Do you just plug it into the wall, or does it have to be connected to some sort of phone jack, or what?
It would plug into your home Ethernet connection.

Similar Messages

  • I have a Cisco wireless router.  Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

    Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

    You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
    Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
    Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
    Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
    If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
    The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

  • If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

    Hi I'm from Australia.
    If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

    Any specific recommendations for a standalone ADSL modem though?
    Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
    I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
    The ISP blamed the modem. The modem support folks blamed the ISP.

  • Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
    As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
    Power off the AirPort by pulling the power cord
    Wait a minute or two
    Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button and allow a full minute for the AirPort to restart
    Now try to configure the AirPort again.  If you continue to see the same symptoms as before, the AirPort will need to be replaced.

  • DrayTek Vigor 120 + Airport Extreme Base Station?  I have queries.

    Ok, so my 3 or 4 year old USR 9108 router went down today-- again. I'm fed up and want a new one. It dies on me once or twice a month. It has decided it doesn't like my powerline adapters lately. and I'm fed right up. I run an internet radio station and what I need is stability.
    At the moment, I'm thinking of setting up a DrayTek Vigor 120 ADSL modem (modem-only) with the Airport Extreme Base Station for my router. (I already have an Express on my network.)
    First of all, can anyone please comment on whether they have this set-up and whether it's solid? I've heard good things about both of these devices, and I need something that's not going to flake out as regularly as my USR has been doing of late. Rock solid is a good thing for a 24/7 stream.
    Second, can I just confirm a few questions that I think I know the answer to, but want to be sure before shelling out?
    I am in the UK using an ISP that uses PPPoA; so I need to be sure the modem has a PPPoA to PPPoE bridge in order for the Airport to talk to the outside world. (Right?). I gather the DrayTek will do this. Will it therefore be just a question of setting the Airport to connect via PPPoE and then entering my ISP login settings in Airport Utility?
    I need a setup ideally that, like the USR, will allow me to assign IP addresses manually to some machines or devices on my network but allow DHCP on other things (like my iPhone). It's particularly important that the radio stream should have a static IP. I gather, from having a play with my Express's settings, that I'll be able to accomplish this either directly or by DHCP IP-reservation. Directly would be preferable. Therefore, if I, e.g., assign my computers an IP address on their local network settings and then just shift the Airport's DHCP range so that it starts with (say) 192.168.1.10, rather than, 192.168.1.2, will the Airport be happy with that?
    I also need port forwarding / port mapping. This should be o.k., right?
    Thanks for help, people.

    I'm running a very similar setup here in the UK. I use a Netgear DG834 rather than the Draytek 120 which I was looking at. I use a Time Capsule connected to the router which is in half-bridge mode and this allows me to connect using PPPoE, which is possible on the BT ADSL network, which I didn't know before! - there's no need to get an expensive PPPoA-PPPoE bridge. I guess the Draytek would do an even better job than the Netgear, but mine was the free solution
    I use the TC to give out addresses to a network of various kit, with one fixed IP for a specific device. I find the TC and my airport express very easy to set up and run, if slightly light on the details of what's actually going on. That said, if it doesn't work, then they're probably broken!
    Nothing you've asked for is out of the ordinary / impossible on the apple kit.
    Hope that helps!

  • Can't set up Aiport Extreme - base station doesn't have valid IP address?

    I recently bought an AirPort Extreme to replace my old Linksys wireless router. I am have a cable modem/router supplied by my cable provider and I was using the ethernet cable to connect the modem to the Airport. However, every time I attempt to configure it I get the following message: "Your Apple Wi-Fi base station does not have a valid IP address." I tried to call Comcast to see if there is something I need to get from them, but they want to charge me ~ $45 to enroll me in wireless tech support! Anyways, I'm at my wits' end - please help if you can!

    Hello MrRuminator. Welcome to the Apple Discussions!
    Each time I attempt to connect to the internet with the AirPort Extreme I run into "Base Station does not have valid IP address -- make sure your base station is connected to your broadband modem..." error. What's odd about this is the fact if I simply plug the ethernet cable back in the older Airport (like right now), I'm able to access the internet once again. Have tried powering off and resetting everything, to no avail.
    It still sounds like your modem is not "recognizing" the new 802.11n AirPort Extreme Base Station (AEBSn).
    Try the following, in order, until (hopefully) resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AEBSn, & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • Airport extreme base station do i have to connect a modem

    just bought a base station connected it to a BT home hub(which constantly dropped the wireless connection on both windows and mac)and it works really well fast and no drops
    the only question i have is i thought it was a wireless router why do i have to connect it to a modem the guy in the Apple Store said i just had to connect it into the broadband plug but this didnt work??

    The AirPort Extreme base station (AEBS) must connect to an Ethernet connection. Usually this is provided by an ISP's modem or ISP's modem/router combo device.
    Typically you would connect the AEBS's WAN port to the Ethernet output of the BT home hub.

  • AirPort Extreme Base Station is not Available in AirPort Admin Utility

    I don't see my APEX Base Station in the list in AirPort Admin Util. I can configure by opening by IP. I have no software firewall. I have plugged in directly to base station, and have reflash with 5.7 firmware. I am using 4.2 of AirPort Admin. I've Tried everything I can find in forums. Anyone else have issues?
    I'm using Mac OS 10.4.4

    I have tried resetting it. It doesn't always work. Sometimes the base station is listed, and sometimes it is not. The base station is functioning though. I can access the newtork, It just doesn't show up in Admin Util.
    I also have an AP Epress connected to AP Extreme via WDS. From the wired side, they either both show up or both do not, which is expected. When they don't show up on the Admin list, the Express also doesn't show up in iTunes from the wired side. Wireless clients don't seem to exhibit this problem.

  • HT4262 Can I extend a WiFi Network, using a 802.11n Airport Base Station with a 802.11g Airport Express?

    Having a new Apple AirPort Extreme (802.11n) I need to extend the network since even the AirPort Extreme provides after about 30 Feet maximum only 50% signal strength in 2.4 GHz and maximum 41% signal strength in the 5 GHz band.
    I have an Apple Airport Express (802.11g) but I am not sure that it can extend with it the network to get a better signal strength?
    I know I can only use the Apple Airport Utility 5.6 to access the AirPort Express, but I can see also the AirPort Extreme though it (5.6).
    Also, it seems that my "old" Wireless Motorola Cable Modem (SBG900) for the same distance (about 30 Feet), which is a 802.11g, gives still a better signal strength (62%) than the Apple Airport Extreme...
    I guess I need the proper instructions how to, if it is possible.
    Any intelligent answers available? Thanks.

    This is very confusing. The AirPort Express Base Station has three settings (under "Wireless" in the AirpPort Utility 5.6) "Create a wireless Network", "Participate in a WDS network" and "Join a wireless network".
    Whereas the first is self-explanatory the second and third seem to indicate, that a relation with an existing Network can be created. This is also indicated, when selecting as the "Wireless Mode:" "Join a wireless network" and then selecting "Wireless Network Name:" where then all available networks 802.11 b/g/n pop up you can choose which to use.
    Now, it does not make any sense, that if all these settings and selections are available, that the AirPort Express cannot extend an existing network, considering that the AirPort Extreme, which is a 802.11b/g/n can be connected to. Even the AirPort Utility 6.0 sees the AirPort Express 802.11b/g but when selected alerts that "This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." And as said, that AirPort Utility 5.6 sees everything and has said setting options.
    The way as I see this it is, that if I can pickup an existing network, created with an AirPort Extreme 802.11b/g/n with an AirPort Express 802.11b/g and have the option to "Join a wireless network" such AirPort Express should be able to broadcast the picked up and joint network. Otherwise the setting options for the AirPort Express are nothing else than a distortion of reality to me.
    Also, before I got the new AirPort Extreme 802.11b/g/n I had an AirPort Extreme Base Station 802.11b/g (gray) and there I was able to extend the network via the AirPort Express 802.11b/g.
    So the above comments do not make sense to me.
    Hope you understand that and have a better explanation available.

  • Replacement base station is not allowing other airport express to work

    I recently had to replace a faulty airport express which I was using as a base station. I have 2 other aiport express units which are being used to extend the useable distance of the wireless connection, however since the new base station was replaced I find that the other 2 units do not stop flashing yellow and therefore I cannot connect to the internet from those other units

    Hard (or Factory) Reset your Airport Express units and re-add them to your network.
    The MAC address of the main base station has changed (as you have replaced it) which I suspect is causing your problem.
    iFelix

  • Airport Extreme base station not recognized anymore by Airport Utility software

    Hello,
    I just encountered the problem today.
    I have old Airport Extreme base sation (mushroom design).Picture below.
    I have iMac 24". About this Mac Picture below.
    Obviously, Airport Utility has been updated recently and today my network is not valid anymore, as well as the mushroom is not managed by Aiport Utility softwrare anymore. The only way to get WiFi now is using my computer as an antenna via the sharing of internet trough its WiFi card: not satisfactory.
    The message of the software led directly to this support community.
    The picture with the base station icon says: "this version of Airport Utility does not support this base station. To know more, check the Sevice and Support Community."
    I did reset the base station may times, without success. I can't rename the base sattion, i can't create rename my network, i can't set up password access, i can't use WiFi other than the default Airport Extreme network.
    Since this is not my field of knowledge, would anyone come up with a brilliant solution other than .... :
    "Did Apple just manage to make you buy a new Airport base station ?."
    Thank you for your time.

    Hello,
    Thank you for your reply and exlpanation.
    I just downloaded the Aiport Utility 5.6.1 from Apple site. Unfortunately the OS X version is not compatible with this Airport Utility.
    I don't have Time Machine neither.
    Below is the message I got:
    "Airport Utility cannot be installed on this hard drive. The Mac OS X version on this drive is not supported"
    Is there something inbetween: a correction to Airport Utility 6.2 plug in that would accept my base station and compatible with my iMac ?.
    Thank you for your attention.

  • Airport Extreme base station does not appear in Airport Utility

    I cannot see the basestation that I am connected to via WIFI or Ethernet.  I cannot see the basestation on ipad or iphone app either.  Basestation is working fine and i have connection working fine with a green light but cannot configure the basestation to allow guest networks or connect my external storage drive.
    any suggestions will be appreciated.

    OK. That should be a third or fourth generation Extreme, plenty new enough. (The most recent OS X and iOS versions of AirPort Utility cannot configure the original Extremes, but they can handle my mid-2007 second generation Extreme.)
    If two or three devices on the same network as the Extreme cannot "see" the configuration interface, I would guess that the problem lies in the Extreme itself.
    Have you tried power cycling the Extreme?
    Did you purchase AppleCare for your 2011 MBP? If so, and if you bought the Extreme less than two years earlier, the AppleCare should cover the Extreme also.

  • HT3500 I am trying to hook up my new Canon MG5320 printer wirelessly to my MacBookPro with OSX.8.2.  The Airport Extreme Base Station does not have a WPS button and so I seem to be stymied even though the printer detects the Airport Extreme.  Suggestions?

    I am trying to set up my new Canon MG5320 printer to my wireless network.  However, there is no button on the Airport Extreme to push when I get to that step in the set-up directions.  I am using OSX.8.2.  Suggestions please!

    If the display shows the "Press and hold the WPS button..." message on the MG display, press the red Stop button on the MG and then select Standard Setup. The MG will search for networks and should display your Airport Extreme's network name. Select this and then enter the password to connect to this network.

  • HT4259 How do I set up an Airport Extreme Base Station (v. 7.6.1) to allow wireless network extension?

    I have an Airport Extreme Base station (purchased in 2009) and an Airport Express base station (purchased in 2011 - the model that plugs directly into the electrical outlet) (both version 7.6.1 according to the Airport Utility info).  I want to use the Airport Express to extend my wireless network.  Using Airport utility setup I have a software option on the Airport Express to set it up to extend the network but I do not have an option on the Airport Extreme wireless setup screen that I can check to allow my wireless network to be extended. 
    All of the documentation I can find on Apple Support states that I should have an option I can check to allow the wireless network to be extended while in the wireles setup section for the Airport Extreme in Airport Utility; but, that check option isn't there.  Is this a case of my Airport Extreme base station being too old to offer that option?  Incidentally, when I try to select the extend wireless network option on the Airport Express from the Airport Utility wireless setup menu I get an error message (no details - just an error message).  The same Airport Express sets up fine if I select join a network (not what I want to do).  Am I just dealing with outdated equipment or does anyone have a suggestion?  Thanks.

    Close AirPort Utility if it is open.
    Temporarily, move the Express to the same general area as your AirPort Extreme and power it up and wait a minute.
    Hold in the reset button on the Express for 9-10 seconds and then release. Give the Express a full minute to restart to a slow, blinking amber light.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear
    Click on AirPort Express just below that and AirPort Utility will automatically open
    Wait a minute while AirPort Utility analyzes the network and announces that the Express will be configured to "Extend" the AirPort Extreme network.
    Enter a device name for the AirPort Express and click Next
    Wait another minute to allow the configuration to occur.
    When you see the Setup Complete message, click Done.
    Now move the Express to a location that is approximately half the distance from the AirPort Extreme and the general area that needs more wireless coverage
    Power up the Express and you are all set.  Trash those old instructions.

  • Printing wirelessly to MacBook Pro with Airport Extreme Base Station

    I have an Airport Extreme Base Station that I used to use wirelessly until I got Verizon Fios. The Fios technicians said the base station couldn't be used and so it's been sitting unused for a few months. However, I really, really miss printing wirelessly, and was wondering if it was possible to use the Airport Extreme Base Station ONLY to print wirelessly, and not connect it any way to my internet (I don't want to mess with any of the fios stuff at all).
    If it's not possible, is there any other way to print wirelessly without purchasing another product or special printer. I have a HP c4480 printer.
    Thanks!

    If your printer has a USB cable the easy way to go about this in my opinion is to plug that USB cable into your Extreme base station. I have the Extreme ABS that looks like a flying saucer. I plug the usb cable into the port that has the symbol that doe NOT look like this <--> rather it looks like a Saguaro cactus.
    My computer then sends print documents to the Extreme via WiFi and then Extreme sends them to the printer via the USB cable.
    If your Airport status is not showing in the Mac's menubar go to system Prefs/Network/Airport and check a little box so it will show up in the menu bar.
    Now if your Extreme is plugged in the wall and powered up your Mac should be able to find it. Click on that menubar item for Airport and scroll down and select your Airport Extreme. I don't know for sure what its name will be. It should still be the same as it used to be when you used it last.
    Now try printing a simple document. In the print dialog window you should be able to select what printer you want to use. If your new Extreme printer is listed select it. You may need to click on Print & Fax and figure out how to select it from there, and choose it to be the new default printer.
    I think this info will do the job. Whenever you want to print you have to go to the Airport icon in the menubar and change your airport connection from your Verizon stuff to your Extreme. Then of course you have to change back when you are done. That is why it would be great to toss the Verizon WiFi radio out the window and just plug your Verizon modem into your Extreme WiFi radio transceiver (router). But I understand you cannot deal with that at this time.
    If this does not do the job, if I have missed something, I will bet you 5 bucks that you can still figure it out if you just look at any error messages and/or look at the Print&Fax prefs and the Print dialog windows etc. and see what I may have missed. Maybe you have to go to SystemPrefs/Sharing and allow your printer to be shared. I don't think so. The way I figure any of this stuff out is to just look at stuff and think and try things and see what happens.
    Your Verizon setup should be something like this.... a cable comes into your house and goes to a 'modem'. From there and ethernet cable (CAT-5 cable) goes from that modem to your Verizon router (WiFi radio transceiver).
    As for getting rid of the Verizon router, when you are ready to give it a go, simply unplug the ethernet cable (it has a plug on the end that looks like the kind of plug that telephones use to plug into the wall, except it is a bit wider, but still has that same kind of snap-lock tab) that comes from the Verizon modem (the modem has the heavy round cable and probably many blinking lights) and plug it into the Extreme. Mine has an icon on the Extreme that is many dots in a circular pattern.
    At this point you may have to unplug the Verizon modem form the wall AC power and the Extreme also. Then plug them back in, wait a minute, go to your Airport icon on your Mac menubar, Select Extreme and start surfing the web.
    It really is that simple with a Mac. Maybe Verizon has found a way to make things difficult but my guess is no. Any password should be taken care of in your Airport Setup Utility program. It should be the same password(s) as you used before when you used your Extreme.

Maybe you are looking for