Do I need to create ip address to another switch when i use stack?
Good Day!
Please help me to answer this question in my title. I have 2 switches my old switch has configure ip address and i will use stack to my another switch the old one will be the primary and new switch is the secondary do i need to configure the ip address of the new 1 or no need? i'm totally confuse on it. I hope you can help me regarding on this matter.Thank you.
no Need.
Here is the procedure:
Tips to Add a Switch as a Slave to the Stack
To add a switch, as a slave, to a stack, complete these steps:
Note: Make sure the switch that you add into the stack has the same IOS version as the switches in the stack. Refer to Catalyst 3750 Software Upgrade in a Stack Configuration with Use of the Command-Line Interface to upgrade the IOS in a catalyst 3750 switch.
Change the switch priority of the switch to be added to "1".switch stack-member-number priority new-priority-valueNote: This step is optional, but it will make sure that the switch has fewer chances to become a stackmaster in the future.
Power off the switch that is to be added.
Make sure that the stack is fully connected so that, when you connect the new switch, the stack will be at least in half connectivity and does not partition.
Connect the new switch to the stack with the StackWise ports.
Power on the newly added switch.
After the new switch comes up, issue the command show switch to verify stack membership.
HTH
Regards
Inayath
***********Plz dont forget to rate all usefull posts*********
Similar Messages
-
I need to create a Notification in CRM WebUI When we create a new contract
Hi Experts,
I am working in Utility Industry and as per the business requirement I need to create a Notification in CRM WebUI
When we create a new contract & click on apply button.
As per my knowledge we are not maintaining Notification information in CRM System. So could you please
help me to call IW52 during the new contract creation when we click on apply button.
Thanks
RoliHello Roli,
If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
Calling Transaction Launcher on user action
BOR object or ITS based Transaction Launcher
Regards,
Ashik -
How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.
You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad -
The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.
Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html -
Need help creating return address labels
Which application do I use to create return address labels?
That's kind of a vague question.
Do you mean you just want to print a sheet of address labels? or you want to print entire envelopes with recipient and sender addresses intact?
If the former, then Address Book will happily print a sheet of address labels and has presets for many common label sizes (e.g. Avery and Dymo). If the latter then any word processing app such as Pages or Word can do that. -
In our country we dont have iTune Store if i create iTunes accounts in another country (example UK) can i use my local bank credit card??
No, you need to be in a country and have a valid billing address in that country to be able to use a country's store. If there isn't an iTunes store in your country then unfortunately you won't be able to buy any content from iTunes.
-
I have deleted and recreated "My Card" several times, but iCal is still not recognizing the card. The application was working fine until a few weeks ago. I recently purchased Microsoft Office for Mac but have not installed any other new software. Also checked to make sure my mac software is updated. Help!!!
ebnovotny,
Have you also used Address Book>Card>Make This My Card?
If you have, you could also quit iCal, find the com.apple.ical.plist file in your Macintosh HD/Users/yourusername/Library/Preferences folder and drag it to the Desktop. Then log out/in or restart and check if your card is recognized. -
Do we need to create a bapi, badi and how can I use them
Hi all,
Please write me about the topics at subject.
Will I use BAPI with Java or C# or VB, whatever...
And for example for what I will use BADI.
Could you provide me code sample to use these?
Thanks.Hi,
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
for VA01 use BAPI_SALESORDER_CREATEFROMDAT2
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Regards,
Raj. -
Can't open either my version of iDVD (and seems Apple no longer has iDVD??) or iMovie (8.0.6) with my MacBook Pro with Mavericks? Is it not possible to create DVDs anymore with Mavericks, which is what I want to do? Creating DVDs with iDVD was what I do most?? Any help with these issues?
Thanks
HalAllen, Thanks for answering. When I try this, I get nowhere:
In the Finder, click the Go menu and choose Home.
Open the Library folder and then the Preferences folder.
Remove the "com.apple.x.plist" file, where "x" should be replaced with the iLife application you are troubleshooting (for example, "com.apple.iphoto.plist" or "com.apple.imovie8.plist").
Remove receipts and reinstall iLife applications
I cant find either the Library or Preferences folders. Are they invisible and somewhere else?
I search with Spot Light for them, I also do not find them....
Advice?
Thanks,
Hal -
Changing address to another country when ordering books.
I'm trying to order a book to a new address. The book is for a friend in the US but Aperture (2.1.4) will not let me add a US address (I live in Canada) when selecting "Add new address". There must be a way to do this.
Try to set the region in your "Language&Text" preferences to US. Then you will be ordering from the US store. But to be able to use that, you will need a credit card with US billing Address and an AppleID regstered to that billing Address.
Apple will only ship to a verified billing/shipping address located in the country whose online store you use: buy from US online store, requires a verified billing/shipping address in the US. -
Hi,
In case if we use Weblogic we give following command on console to create a deployable ejb, while weblogic.jar is in classpath.
java weblogic.ejbc temp.jar StudentBean.jar
1)What are the classes or jar files we have to set in classpath,
2)What console based command(like what I mentioned above for weblogic) can we use,
so that we can create a deployable jar file in case if we are using Oracle application server.
thanks,
MilindYou can discover the origins of a loaded class programatically. You want to print:
TheClass.class.getProtectionDomain().getCodeSource().getLocation().toString(); -
We don't know exactly how does lookout handle .bmp or .wmf files created in third party programs like CorelDraw, since we have a different response from lookout to those graphs. We loose the shadows effects, we don't have a transparect effect, etc.
Thanks in advance, any help is welcome.It shows Peter's doing its jobs properly.
Anyway there is no more communication from Sony since awihle. If you can have any news.
Anyway good job Zero! -
HT4314 Game center : I need to change my user name to another name when I use games with apple
Your support needs in this situation
Chaging your user name is easy. I can see you haven't upgraded to ios7, but that is okay.
Go to the gamecenter app> click your email> sign in> and scroll down until you see your user name> Then you can cahnge it from there. -
I need to change my user name to another name when I use games with apple
Your support is highly needed
Chaging your user name is easy. I can see you haven't upgraded to ios7, but that is okay.
Go to the gamecenter app> click your email> sign in> and scroll down until you see your user name> Then you can cahnge it from there. -
Error 'Invalid address style' when create new address Legal Entity R12
Hi,
Did somebody had the same problem like i do.
I am trying to create a new dutch address for a new legal entity in Oracle R12.1.1 Vision, but however hard i trying to do so i always received the error message 'Invalid Address Style' and i filled in all the required field.
When i tested with the country 'US' or 'Australia' is could create a new address without any problem.
I hope you can help me to solve my problem.
Thanks in advance...!!
WimHello Sandeep,
You were right, I checked the dff for the address style and activated the once for the countries I needed and now I can create new address for the required countries by using the legal entity configurator.
Thanks for your help..!!
Regards,
Wim
PS: Incase somebody else has they same problem, let me know and i send you the worddocument i made with the solution
Maybe you are looking for
-
MacBook Pro Retina to TV via HDMI
So, I have my MBP Retina and I would like to connect it to my television via HDMI. I have my Mac connected to my TV via HDMI, and it shows the picture, but there is no sound! How do I fix this?!?!?!?!?!?! I need help ASAP!!!! Thanks, Kynan
-
Error while importing data in DTW
hi, while importing the data for items in DTW the option for browsing templates differs from normal DTW. "query params" the odd structure displayed in the tree structure when we select the data source file.for items alone i had this type of tree s
-
dear masters In maintain operation data of WCM there is one option physical bloking, can any one tell me in simple own language whats the meaning of this and in which situation and where we can used it thanx
-
Photosmart 7510 Prints the text offset to the right
I use MS Word 2010 and when I print text it appears offset 7 mm to the right. e.g. Left margin set at13 mm starts printing at 20 mm, and Right Margin set at19 mm stops printing at 12 mm. The same offset appears when using other applications e.g. Pub
-
CC says I'm up to date with Ps 13.0.1
How do I download Photoshop e 13.1? The CC manager says that I am up to date with Version 13.0.1. I was going to uninstall but Photoshop is not listed in the installed programs. I'm using Windows 64bit. Thank you for your help.