Do I need to create new group for standby redo log files?

I have 10 group of redo log files with 2 members for each group for my primary database , Do I need to create new group for standby redo log files for the standby database
Group#     Members
==============
1              2
2              2
3             2
4             2
5             2
6             2
7             2
8             2
9             2
10           2
If So, The following statment is correct? or nto
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.LOG');
please correct me if am doin mistake
becuase when I issue the statment I getting error message sayin the group is already created.

Thanks John
I just find the answer
Yes, it's recomeded to add new group , for instnace If I have 10 group from 1 to 10 then the standby shoudl be from 11 to 20
Thanks I found the answer.

Similar Messages

Dataguard Solution for standby redo log file groups

Respected Experts,
My database version is 10.2.0.1.0 and Red Hat 5 os.I want to create a standby database using RMAN.
Can any one help me with the full steps.And i'm also confuse about number of standby redo log file members
need to be created.
Thanks and Regards
Monoj Das

My database version is 10.2.0.1.0 and Red Hat 5 os.I want to create a standby database using RMAN.To configure standby either you can use duplicate target database for standby
or
1) restore standby controlfile
2) mount standby database
3) restore database
and configure standby paraemter then start MRP, will do.
http://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ps.htm
Can any one help me with the full steps.And i'm also confuse about number of standby redo log file members
need to be created.It depends which parameter you want to use, if you mention log_archive_dest_2='service ARCH ' then no need to create any standby redo log file groups,
If you use log_archive_dest_2='service LGWR ' here transport will be in terms of redo and you need standby redo log files on standby database. Which is realtime.
When you use LGWR, data lost will be less if in case of any online redo log file lost. which is recommended.
HTH.

How to create new group for material type

Hello all experts,
Im unable to create a new group for materials types, diff groups for FG and raw materials material type??
Could you pls help ??
Thanks in advance.

Hi
When you create a new material you have to specify the material types like finished goods or raw material like that in the initial screen
For this new material types can be defined in
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T code OMS2
After specifying the material type and giving organizational data like plant, storage location,sales org etc we go on to create the material
In one of the tabs the material groups should be specified and from MM point of view it is a reqd entry
this can be defined in
Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T .Code: OMSF
I beleive this is what you are asking about
Regards
Raja

Oracle standby/redo log file shipping keeps needing logs re-registering

Hi
We have Log File Shipping enabled and the prod system ships redo logs over to the LFS server. It's kept 24 hours behind. It usually ships the logs (and I believe automatically registers them) without issue.
EXCEPT - it keeps complaining about missing redo log files.
The file is usually there; but just needs registering with:
alter database register or replace logfile '/oracle/S1P/saparch/S1Parch1_636443_654987192.dbf';
(we found if we left out the 'or replace' it takes a very long time or even hangs)
It then plods on and applies the next... can go for another 2 or 3... or 20... but then often gets stuck again, and you need to register the next.
Can spend whole days on this...!!
We did try running a script to register the next 1365 redo logs! It failed on 4, so I ran it again... it worked on those 4, but turned up 3 others it had worked with before! HUH?!? So manually did those 3 ... fine... it carried on rolling forward... but got stuck after 10 minutes again when it hit another it reckoned needed registering (we'd already done it twice!!).
Any ideas?
Ross

Hi
We have Log File Shipping enabled and the prod system ships redo logs over to the LFS server. It's kept 24 hours behind. It usually ships the logs (and I believe automatically registers them) without issue.
EXCEPT - it keeps complaining about missing redo log files.
The file is usually there; but just needs registering with:
alter database register or replace logfile '/oracle/S1P/saparch/S1Parch1_636443_654987192.dbf';
(we found if we left out the 'or replace' it takes a very long time or even hangs)
It then plods on and applies the next... can go for another 2 or 3... or 20... but then often gets stuck again, and you need to register the next.
Can spend whole days on this...!!
We did try running a script to register the next 1365 redo logs! It failed on 4, so I ran it again... it worked on those 4, but turned up 3 others it had worked with before! HUH?!? So manually did those 3 ... fine... it carried on rolling forward... but got stuck after 10 minutes again when it hit another it reckoned needed registering (we'd already done it twice!!).
Any ideas?
Ross

Create new group for texting

i am trying to create a new permanent group for texting in the future. surely an iphone 4 will create and save a specific group of certain people to send texts too later on.. please tell me how to create and SAVE new group?? its really important i figure this out and i appreciate your time and help. thank you

The only way to create groups for messaging is by sending a message to everyone in the group, and as long as you never erase the messages from the chaat it will always appear in your conversations in the messages app. Unfortuneatly there is no way to organize contacts into groups in any iOS as of now. They will add many new group chat features in iOS8, but you will not be able to upgrade to it when it does come out because you are using an iPhone 4.

Need to create Server group for Background processes

Hi Gurus,
I need to increase my background work process can anyone tell me how to configure it.There is only 1 background work process configured in my installation.
Thanks,
Ravi

HI Ravi
When you goto transaction rz10, you will rightly get 3 profiles,namely
Default profile
Start profile
Instance Profile
Out of the three, select the instance profile ( the one with the SID and the instance number) and get in the change mode by clicking on the spectacle button in the bar.
Further you will find the parameter rdisp/wp_no_btc in this profile. This parameter indicates the no. of background work processes set for this particular instance,
Change the value for this parameter. Also note that the no. ny which u increase the batch proceses, also reduce the dialog process by the same number in parameter rdisp/wp_no_dia.
Restart the system and the changes will come into effect.
I hope this helps you
Regards
Chen

Create new mailbox for existing users?

Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
Ram

Hi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK     |     ATINN     |     KLART     |     ATWRT
Release Grou+Release strategy |     Characteristic name     |     Class type     |     Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
multiple characterstics can be
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
PO01     |     EBAN_EKGRP |     032     |     100
Regards,
Yogesh

Standby redo log group for particular thread

hi masters,
actually i am performing an experiment to create physical standbyt database on the same machine as my primary database.
i ma going according to 'data guard admin guide'. while section for ading standby redo log group,it says that you have to add standby redo log group to "thread"....
what is this thread? and how can i foind to which thread i have to assign the next redo log group??
how can i find current thread??
what if i dont add "to thread' clause in my statement:-
ALTER DATABASE ADD STANDBY LOGFILE THREAD 5
2> ('/oracle/dbs/log1c.rdo','/oracle/dbs/log2c.rdo') SIZE 500M;
thanks and regards
VD

Vikrant,
First a question: Do you have a RAC instance? If so the paragraph even doesn't apply to you and I'm not sure why you are questioning it.
Secondly
"The THREAD clause is required only if you want to add one or more standby redo log
file groups to a specific primary database thread. If you do not include the THREAD
clause and the configuration uses Real Application Clusters (RAC), Data Guard will
automatically assign standby redo log file groups to threads at runtime as they are
needed by the various RAC instances."
this means you dont have to specify thread for RAC,as it will allocate one according to current thread.
Your conclusion is incorrect.
Where do you read the word 'current'?
Oracle will likely simply make sure each instance has sufficient standby redolog groups, the requirement is 1 standby redolog group per group + 1 extra.
Sybrand Bakker
Senior Oracle DBA

Separate ASM diskgroup for Online redo logs

Version: 11.2.0.3
Platform : Solaris 10
One of the Hitachi support guy has suggested to create a separate disk group for Online redo logs. His rationale was that ORLs was write only files and it would be better to put in a separate disk group.
What do you guys think ?

Tom wrote:
Version: 11.2.0.3
Platform : Solaris 10
One of the Hitachi support guy has suggested to create a separate disk group for Online redo logs. His rationale was that ORLs was write only files and it would be better to put in a separate disk group.
What do you guys think ?
A separate disk group for just the ORL's? The files are indeed write only but that does'nt mean that you would need to "isolate" them over a few disks by putting them in an individual disk group. With one diskgroup spread across several disks, ORL's would enjoy a better IO bandwidth as ASM knows how to deal with them by allocating the AU size of 128kb for them. So as the suggestion factor goes, mine is a no. If you haven't experienced a really really bad performance impact due to the ORL's than may be, you may want to think doing it.
Aman....

In contacts section for the groups section i want to delete old groups i have on the phone and then add a new group for easy access for work contacts for calling. rather then searching each individual contact when needed. is this possible?

i currently have about 6 different groups listed on the iphone in my contact list section and i want to delete the old ones and create a new group for work puposes!
i dont want any apps all i want is something similar to my favourites list but in a group so i can just go into that work group and scroll to the person i need to call and this way seperating my personal and work contacts.
because i do alot of calls from my car i dont want to have to search my contact lists to find the right person i just want them all in a simple folder.
is this possible because if i already have groups on my iphone i should be able to delete the old ones and create a new one?

Deleting groups on the phone and creating new ones is not supported with iOS4, you'll have to do that on your computer and sync again.
Let's see if they changed that in iOS5 when it is released.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Help! - need to create/list groups in OS 10.5.2 unix

I need to create some groups in order to install Oracle
on my 10.5.2 MAC. 10.3.6 MAC had nireport and nicl to
list and create groups. Unfortunately even tho I can get
man pages for these commands, the commands themselves no
longer exist.
When I posted this question to another forum they directed
me here, and mentioned that dscl would do what I want.
But I can't make heads or tails out of the man pages for
dscl!
Help!

SystemPreferences>Accounts, unlock the lock and click the '+' sign. The pull down of 'New Account' has a 'Group' item in it.

Creating Authorization groups for material types

Hi All,
I have a requirement to create Authorization groups for different material types we have in our company. Basically these are intended to restric the users from accessing the material master. Different material types needs to be assigned to differnt group of users.
So if we can create couple of Authorization groups, then I am thinking of assigning the material types to these groups.
I went to SPRO---Logistics general ---Material master -
Tools --- Maintain authorization and authorization profiles. TCODE : PFCG
Is this the right path?
Please advise
Shane

Hi All,
I don't think SPRO---Logistics general -Material master- Tools --- Maintain authorization and authorization profiles is the right path to create new authorization groups.
Can anyone explain how to create new authorization groups for different material types. The purpose is to create a role and assign this auth. group to this role and provide that security role to specific users.
Regards
Shane

Created New Group but cannot Search User

Hi,
I have created new group, added the required menu, I can see the Search User Form, but when I tried to search ALL or certain user there's no user(s) found.
Any settings or permission required forthis group?
Thank you very much.

If you are trying to search for users, you need to make sure your user who is searching has access to the Organization.
Go to manage organizations, select the organization, select the Administrators option from the drop down, and then add the group you want to give writes to. Then all users in that group can perform searches for users within that organization.
-Kevin

Do I need to create new group for standby redo log files?

Similar Messages

Maybe you are looking for