Do I need to enter Pipeline URL in SLD for Business System in PI ?

Hi PI experts ,
I am having problems with my file adapter sender adapter .There is error :
2008-09-30 18:40:17 Success The message status set to DLNG.
2008-09-30 18:40:17 Error Transmitting the message to endpoint http://xxxxxx2230.wdf.sap.corp:51080/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.UnknownHostException: xxxxxx2230.wdf.sap.corp.
2008-09-30 18:40:17 Success The message status set to WAIT.
More info : I don't have anything enter for Pipeline URL under Integration right now
Do I need to enter Pipeline URL  under Integration under Business System in SLD?
I don't have anything right now? Shouldn't this entry be automatic?Why I need to enter manually if I need to at all?
Please help!
Thanks
Bob

Do I need to enter Pipeline URL under Integration under Business System in SLD?
--> yes, we shd provide this in SLD.
I don't have anything right now?
--> http://<ur server>/sap/xi/engine?type=entry
       give your server at <ur server>
Shouldn't this entry be automatic?
-->it shd be entered in SLD once.
Why I need to enter manually if I need to at all?
--> if you configure it in SLD once then there is no need for you to do it again.
     By giving this URL yoou are connecting your adapter engine to Integration engine. once your adapter picks the message, it will check the BS and based on the configuration of BS it will push the message.
some times we can configure our adapter engine as a stand alone system with out IE or with different IE's, that is the reason SAP allows us to configure it.

Similar Messages

  • Pipeline URL in SLD not shown in SAP PI

    Hello PI-gurus,
    I've got a problem with the SLD PipeLine URL data of a Business System and the SAP PI Integration Engine Configuration Data.
    I've changed in SLD the name of the Pipeline URL in the Integration tab
    of the Business System of SAP PI. Saved the entry and after restarted SLD and SAP PI Istill see in SAP PI the wrong (old) name.
    When I perform in SAP PI (SXMB_ADM) the Global Configuration Data and
    do a System Landscape - Load Configuration the wrong (old) entry is set in
    SAP PI. When I look in SLD the name of the Pipeline URL is correct.
    I've also refreshed all the caches in de exchangeProfile and also in the ID en IR.
    Please advise.
    Best regards,
    Mike Laanen

    The RFC between SAP PI and SLD is working correct, an other strange thing is that the sldcheck provides the same wrong (old) name in the section:
    Calling function LCR_GET_BS_DETAILS
    Retrieving data from the SLD server...
    Function call terminated sucessfully
    Details of own business system TXE100
      caption = TXE100
      product = SAP NETWEAVER
      IS-URL  = http<b>:/</b><host>:<port>/sap/xi/engine?type=entry
    Regards,
    Mike Laanen

  • Why do i need to enter the credit card information for downloading free apps and redeem the codes?

    getting a message says apple id has not yet been used with the itunes store while trying to download apps
    why do i need to enter the credit card information for downloading free apps and redeem the codes?

    As a security precaution, Apple verifies your billing credentials with every transaction whether paid or free apps or using the balance of a redeemed code.

  • "You may need to enter the name and password for an administrator"

    I am suddenly getting this message when I try to copy a file from my new Macbookpro to my Powerbook running 10.4.9.
    "You may need to enter the name and password for an administrator on this computer to change the item named "file i am trying to transfer". stop continue
    I hit continue and get the error message: "The item "that I am transferring" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?
    I say continue and get the error: "The operation cannot be completed because you do not have sufficient priveleges for some of the items."
    My network was working fine until today. I can copy fine to all other computers on my network. But not this one.
    If I initiate a transfer from the Powerbook, everything works fine.
    Ideas?

    I experience the exact issue between a macbook pro and an iMac.
    I can access the files locally on my macbook, copy them on usb-stick, etc.
    but ... when I try to copy the files to my iMac ... it fails with the sequence of questions you mentioned.
    However!
    I can copy whatever I like from my macbook if I use my wifes account.
    So...
    Imho there is a problem when the SAME account is used on both systems.
    In my case, I copied my account from the macbook to the (new) iMac.
    Mac OS X seems to be confused when the same accounts are used.
    Does this makes sense?
    All help welcome.
    Luc

  • "You may need to enter the name and password for an admin" ....

    Hi everyone!
    I'm getting this error when trying to copy files over to a network drive. First, it'll pop up and say:
    "You may need to enter the name and password for an administrator on this computer to change the item named"
    At the same time, it will create an empty file on the target drive. When I click "Continue", it asks me for my username and password, which I happily enter. At that point, it errors out and says "The operation cannot be completed because an item with the name "xyz" already exists".
    I've tried repairing permissions, chmod 777'ing a file, etc. It did work for a short time (it seemed to work while I was at work, but once I arrived home, it quit working and hasn't worked since.) I've tried rebooting as well.
    Does anyone have any suggestions? I'm really puzzled over this!
    Thanks!

    Actually I get some other errors as well:
    "You may need to enter the name and password..."
    Then I click continue...
    "The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
    I click continue...
    "The operation cannot be completed because you do not have sufficient privileges for some of the items."
    I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
    But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share.

  • Adding pipeline url in SLD buisness system

    Hi,
    I am trying to add "pipeline URL" in an exisitng buisness system in a central SLD. The role of the buisness system is Integration Server. But i am not able to save the pipeline url , after clicking the save, the url value is again showing as blank.
    i have checked the SXMB_ADM in integration server and the url value is showing as correctly and also successfully loaded the system configuration from SLD with correct Integration server url.
    How can i make the pipeline url entry in SLD buisness system definition?

    The role of the buisness system is Integration Server.
    Does that business system refer to the XI system? Ususally only XI business system is assigned as the role of Integration server. Make sure that if it is an R3 or ECC system, the role is Application Server.
    Regards,
    Prateek

  • Help with "You may need to enter the name and password for an administrator

    I'm trying to move files from one of my external harddrives to another external harddrive. I keep getting this message "You may need to enter the name and password for an administrator on this computer to change the item named "Documents". I also get this for other folders I want to move, but not all folders on that drive.
    I am the administrator, and it only gives me an "ok" button, no option to enter my name and password again.
    Any ideas?

    I have the same problem, trying to copy items from external hard disk to another computer on the network. I can copy without problems from external hard disk to my laptop. But not from external hard disk to another computer on the network, and neither from my laptop to another computer on the network, but ONLY if the files I try to copy from my laptop were first copied from that external hard drive. It keeps popping me up with this message. Please help, or fix.

  • Need to change Pipeline URL

    Hello,
    I need to change the pipeline url for my XI. I did changed it in SLD -> Business System and in SXMB_ADM -> Integration Engine Configuration. But when I check the configuration in SXMB_ADM (F7), it seems that everything is not correct:
    Yellow triangle and this message: "Corresponding Integration Server: Current Configuration <> System Landscape"
    What can I do to force the new pipeline url to be used ? Restart something, refresh something ? I did refresh everything I can, but it didn't fix the problem.
    Please be specific in your directions, my XI administrative knowledge is limited.
    Thanks
    Jerome

    Hello,
    First thanks everyone for your help. Now Pipeline url are the same everywhere.
    However, the server seems to still listen on the old url... Just to give you the context, the old and new url are almost the same, I just changed the port. Currently, old url still returns "Empty HTTP query received" and new one return "http error 404".
    I did restart all instances in sapmcc  to try to force the change, but it didn't help.
    What should I try next ? Change another setting, refresh/restart something ?
    Thanks again,
    Jerome

  • SAP_HTTPServicePort URLs in SLD for PI are updated by SLD host name itself

    We have upgraded our PI 7.0 to 7,1. We have a central SLD. After the upgrade, SAP_HTTPServicePort URLs (in SLD Content maintenance) for the PI are all getting initialized with SLD host name itself.
    Example: for port.CIDX.af.pip.<PIPhostname>
    URL: http://solman:50100/MessagingSystem/receive/CIDXAdapter/CIDX
    solman is my central SLD.
    This is happening in our production system only. In Dev/QAS systems, the behavior is normal like
    http://PIDHostname:50000/MessagingSystem/receive/CIDXAdapter/CIDX
    I have tried to update the URLs manually, but, when the instance is bounced, the SLD is getting refreshed with the erroneous URLs.
    I want to know where from the SLD content is refreshed?

    There are two ways....
    Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
    Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
    Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
    regards,
    Arvind R

  • Help needed to figure out URL and username for the LDAP server

    Given that LDAP directory parameters as follows, how can i identify the exact parameters to be used in my LDAP service access Java code. Im using JNDI to access a LDAP server given by an Ip address (say, 10.1.1.20) and the port number (say, 389)
    Given: -D "cn=mycn,ou=mystaff,o=myorg,dc=test,dc=my,dc=org" -w secret
    Heres my sample Java code
    env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL, "<URL>");
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, "<PRINCIPAL>");
    env.put(Context.SECURITY_CREDENTIALS, "secret");
    ctx = new InitialDirContext(env);
    SearchControls controls = new SearchControls();
    controls.setSearchScope(SearchControls.SUBTREE_SCOPE);
    results = ctx.search("ou=mystaff,o=myorg", null);Could any one please help me to recognize what will be the values to be comes to URL, and PRINCIPAL , so that i can search all the objects inside "ou"
    Note: Actually i tried several times, bt i was getting "Invalid Credentials" exception.. i doubt that is because the URL or the user name i gave was not syntactically correct. Thats y i need to verify with you all.
    Thanks in advance
    Saj

    env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL, "<URL>");env.put(Context.PROVIDER_URL, "ldap://10.1.1.20:389");
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, "<PRINCIPAL>");env.put(Context.SECURITY_PRINCIPAL, "cn=mycn,ou=mystaff,o=myorg,dc=test,dc=my,dc=org");
    env.put(Context.SECURITY_CREDENTIALS, "secret");
    ctx = new InitialDirContext(env);
    SearchControls controls = new SearchControls();
    controls.setSearchScope(SearchControls.SUBTREE_SCOPE);
    results = ctx.search("ou=mystaff,o=myorg", null);

  • I need help entering ALL of my addresses for Christmas card address labels on my new iMac.  Whats the best way to do this?

    Anyone have any tips how to get started with address labels?  I went to my address book, but it looks so time intensive.  Can I mail merge addresses I put into a excell spread sheet to print labels?? 

    Don't waste your time with formatting in any of those programs - creating two pages for cards, blah blah blah.
    The best way to mail merge on a mac is using address book.
    People think merging got harder, but apple made it easier - more intuitive. You don't merge mailing labels through a word processor - you do it through the program which houses the addresses.  If the addresses aren't in address book yet, that's a snap.
    First, go to your program/file with the addresses (pages, numbers, excel, etc.). I think it's easiest to use numbers.
    make sure the column headings are set to Mac Address Book Standard Names - that way you won't have to spend too much time mapping them in address book. (if you're not sure what those are - open address book and just a view a card/record, or open pages or numbers and search in the help menu for the term "merge field names" and it will give you a list. They're pretty simple - things like "First Name" "Last Name" "Street Address" etc.
    For christmas cards, I add an extra column under the heading "Note" and input "Christmas Card List" for every record.
    Once your data is formatted with the correct column names, export the list to a csv file.
    Open Address book in mac and import the list - make sure the columns match up with the correct fields.
    It might ask if you want to overwrite or update - that's up to you.
    If you know your christmas card list has the most recent address info, hit update.
    Once the import is done it should take you to the front page for the address book in which you'll be given the choice to view Icloud addresses (if you sync those) and also the Last import. Any groups or smart groups you have will show up in the list too.
    Click on Last import - make sure all the addresses and names you just imported are there. If not, something went wrong - go back and check your import field mapping. If all's good, keep rollin'. (it helps to scroll to the bottom of the import list to get the count of imported records)
    Here, you can do one of two things - create a group or a smart group.
    For a regular group - Highlight all the records on the right panel in your last import, then go to file > new group from selection. Rename your group christmas cards or something like that.
    I prefer to create smart groups.
    For that, goto file > new smart group. You'll come to a filter window. Click on the first drop down box and scroll to "Note." Then in the second drop down box choose "is" and in the third and final input box on the right, enter the text from the note column you created in the address list file. I used "Christmas Card List".
    That will create a smart group, such that any time you enter a new address or contact in the address book with the note field that equals "christmas Card list" it will automatically be entered into this group.
    Either way, you're only one step away from labels.
    With that Christmas Card List selected in address book, go to print. When the print dialogue box opens, make sure to click on the button for show details toward the bottom left. That will open up your choices for style.
    Under "Style" click on mailing labels.
    Under "Layout" choose your label layout (i use avery 5160). It will show you a picture of the label and you can tell if it's the right one.  You'll also notice the labels are being merged correctly, with one address per label, rather than one name for the entire page - like if you try to do this through pages.
    Print away.
    Hope that helps.
    Craig

  • LAN Networking / UUID error - "You may need to enter the name and password"

    I'm having an issue with networking via ethernet cable. I'm connecting to Windows Vista via ethernet from my macbook pro.
    Everything was going hunky dory until today when I connected and tried to copy a folder over from my desktop to a folder on my vista machine.
    The error is a three tier one, as follows:
    1. +"You may need to enter the name and password for an administrator on the computer to change the item name "..." - stop or continue"+
    2. +"The item "..." contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" - stop or continue+
    3. +"The operation cannot be completed because you do not have sufficient privileges for some of the items."+
    This happens with all files and folders that I try to transfer over. I have full permissions on both ends to do this and the folders have full permissions.
    I've done a bit of trawling and have found out that if you goto: system prefs - accounts (click unlock) - right click on the user in question - advanced options, you can click on the "create new" button under UUID and create a new UUID digit, then restart. This works!!!!... But...
    ...it only works for a little while. After transferring a few folders or files accross, it comes up with the three tiered warning: "you may need to enter the name and... etc etc."
    This is really annoying.
    I've found my initial answers on this thread: http://discussions.apple.com/thread.jspa?threadID=1823835&tstart=45, but this issue seems to go one step further by constantly not allowing me access
    Has anyone got any thoughts about what I can do? I've also tried running applejack on startup, but this doens't work either...

    Actually I get some other errors as well:
    "You may need to enter the name and password..."
    Then I click continue...
    "The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
    I click continue...
    "The operation cannot be completed because you do not have sufficient privileges for some of the items."
    I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
    But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share.

  • Adding URL to Services for Object for Invoice

    Hi Friends,
    I need to add a URL to 'Services for Object' drop down on the menu bar (so that it will appear in 'Attachment List' after clicking on which it will navigate to the link).
    I am not sure but will SWU_OBJECT_PUBLISH be useful? How to use this for URL insert?
    Can anyone please tell me how it can be achieved?
    Thanks in advance for your help,
    Sagar

    hi
    check out the function modules BDS_BUSINESSDOCUMENT* in transaction OAOR.
    hope this helps
    regards
    Aakash Banga

  • Need information on how to create Idoc Inbound Interfaces for Business Sys

    Hi,
    I'm losing it.
    Can anyone point me to some documentation or an example of how to create inbound interfaces for Business Systems in PI 7.1.
    Here's the scenario
    I'm working on a B2B integration process which sends inbound idocs to an ECC 6.0 system.
    I've created the Business System communication component  but under the Inbound Interfaces it is blank.
    I want to have MBGMCR.MGBMCR03 as an inbound interface.
    But I forget how to get it there.
    For Business components you can just add the inbound interface.
    I've already defined the Business System in the SLD pointed it to the correct Tech System, imported the idoc definitions in the Enterprise Service Builder and set up IDX1, IDX2 to ensure the metadata exists in PI.
    But for Business systems the hep says that it's got to come from the SLD.
    Outbound/Inbound Interfaces
    For each business system, the interfaces that are installed on the business system are also entered in the SLD. These interfaces are displayed in this frame. You cannot add any other interfaces.
    I know I've done this before, but I can't remember how.
    Cheers,
    John

    Hi John ,
    Please have a look at the following links which might be of help to you
    PI 7.1 IDocs interfaces act as operations
    http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/7933
    /people/peter.gutsche/blog/2008/10/27/what146s-new-in-sap-netweaver-pi-71
    There is a section in the following link on IDOC , have a look at the links in that section
    https://wiki.sdn.sap.com/wiki/display/XI/ImportantBlogsand+Notes
    Best Regards

  • When I try to enter target URLs in my campaign on Direct CPV and click save and continue, the target URLs don't go into my target box. Do I need to do something with the settings on Firefox?

    When I enter target URLs into my Direct CPV campaign, they don't carry over to my target list when I click save and continue. Is there a setting on Firefox I need to change to fix this?

    I only have the problem when trying to load targets into my Direct CPV campaign.

Maybe you are looking for