Do I need to stop the SDM process on UNIX for backups?

We are running Netweaver 04 SP13 on HPUX. Can the SDM process stay running or do we need to shut it down during backups?
Thanks!
Steve

As the technical operations manual stated:
Create a backup of the SDM installation directory /usr/sap/<SID>/JC<inst_nr>/SDM.
Make sure the SDM is stopped during backup.
That should be clear enough...
Regards,
Benny

Similar Messages

Hi! I am stuck with my iPod, I have the 4th generation and I wanted to download the iOS7 but I accidently hit my iPod while doing homework and it discounted and stopped the whole process and now it says that I need to recover it but I can't recover it.

Hi! I am stuck with my iPod, I have the 4th generation and I wanted to download the iOS7 but I accidently hit my iPod while doing homework and it discounted and stopped the whole process and now it says that I need to recover it but I can't recover it. Please help me!

4th gen ipod cannot run ios 7 at all.
iOS: Unable to update or restore - Support - Apple

PFRD 11.1.1.4 - How to stop the In-process Reports Server

I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:

in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
Paulo

Thanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo

Would it cause any harm to stop the DBworker process on the logger and let it restart during business hours?

I'm trying to connect to a database in an ICM script for the first time and I added a new database user to the Router registry. I think I must have to restart the service to activate the new credentials. Would it cause any harm to stop the DBworker process on the logger and let it restart during business hours?

Lisa,
You shouldn't need to restart any processes. If you already had the database setup in Database Lookup Explorer before putting the credentials in the registry, you can just make a change to the Database Loookup entry, and the Router will try to reconnect.
Also, the Logger has nothing to do with ICM database lookups - the DBworker is part of the Router processes.
-Jameson

How can I stop the install process?

How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.

Hello Serau1s,
It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How do I stop the login process when I open iTunes?

How do I stop the login process when I open iTunes? It often request I login sometimes twice.

I amhaving the same issue of having to log into my apple account wheever I open I-Tunes. In my iTunes sharing my password requirment is unchecked and in filevault it is unchecked also. I have just upgraded to the newest version of iTunes and I still get the pop-up window asking me to login.
Any other thoughts?
thank you

Do I need to stop the dbTier or/and appsTier when ... ?

Do I need to stop the dbTier or/and appsTier when I run
perl adpreclone.pl dbTier
perl adpreclone.pl appsTier
or when I copy the Source System to the Target System (for the appsTier) ?
Thanks,
Paul

Do I need to stop the dbTier or/and appsTier when I run
perl adpreclone.pl dbTier
perl adpreclone.pl appsTierThe database and the database listener should be up and running when you run the above two commands. For the application tier, you can keep it up or shut it down.
or when I copy the Source System to the Target System (for the appsTier) ?It is recommended you shutdown the application services when you copy the application files. Some operating systems do not allow copying file while it is in use (like Windows).

CS6 3d: how do I stop the rendering process?

How do I stop the rendering process in CS6 3d? You used to be able to just click the mouse.

Steve:
Thanks for working with me on this. I'm not much of a techie, so bear with me. This is the info I think you were referring to. If it's not, just let me know and I'll try and get it.
Hardware Overview:
Model Name:     iMac
Model Identifier:     iMac10,1
Processor Name:     Intel Core 2 Duo
Processor Speed:     3.06 GHz
Number of Processors:     1
Total Number of Cores:     2
L2 Cache:     3 MB
Memory:     12 GB
Bus Speed:     1.07 GHz
Chipset Model:     ATI Radeon HD 4670
Type:     GPU
Bus:     PCIe
PCIe Lane Width:     x16
VRAM (Total):     256 MB
Vendor:     ATI (0x1002)
Device ID:     0x9488
Revision ID:     0x0000
ROM Revision:     113-B8030C-253
EFI Driver Version:     01.00.367
If you have any questions or concerns please don't hesitate to contact me.
Dennis

When I "share" to DVD the file is transcoded. When it reaches 66% it starts to "finishing", but the process stops and does not proceed beyond 66%. When I stop the sharing process I receive the following message "the share operation dvd has failed".

When I "share: to DVD the file is transcoded. When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish. The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
Is this a problem with FCPX or Create DVD? How can this problem be resolved?

The handshake between FCP and a hidden app called Create Disk wasn't completed.
Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
Russ

How can we stop the Collapse process in process chain.

hi
guys
How can we stop the Collapse process in process chain.if any one know's plz tell me
your regards
suresh

Hi,
All the above post duly suggest a the methods we usually follow to cancel a collapse request i.e sm37 ---> Cancel without core,but these solution only applies if we are running collapse as a seperate variant in the process chain, in case its running as a part of change run the all above process will lead to the locking of the target.
In that case if you could "lock the target" even before the collapse ran will result in the "Stopping of the collapse on the target automatically" .
As far as figuring out the exat job of the collapse, you can directly get the job details in the "display message' , context menu option of the "Collapse variant" in the chain, clicking on the batch monitor and then clicking on the job to get its detail,then going to the specific "Application server " via SM51 and cacelling the job.
Do check wearther the target is unlocked or not in sm12 if not then choose the object in se03 and select "Unlock".
Hope it will serve yoour purpose
Thax & Regards
Vaibhave Sharma

HT1222 how can i stop the update processing of ios7 on my ipad. I changed my mind and want to stop it

I need help stopping the apple software that I just started on my ipad...ios7. I changed my mind and want to stop it... HELP

Hi,
As I stated before you do not get iTunes 11 on your ipad. Are you getting a message on your works computer to update iTunes on the computer from version 11 to 11.1? If you select not to update iTunes, can you still sync your ipad to iTunes 11?
Jim

How do you stop updates on apps once you have selected to update all? I am limited on how much I can download daily and I need to STOP the updates

I only have a limited amount to download daily and I need to stop the updates.

Deletion of apps works as you describe EXCEPT in the case of apps that are pre-loaded as part of the iOS. Apps that are part of the iOS cannot be deleted by the user.
To free storage space, try removing unneeded videos, photos, music that take a very large amount of space.

Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

Do I need to stop the SDM process on UNIX for backups?

Similar Messages

Maybe you are looking for