Do I still have to calibrate my macbook pro battery? (early 2011)?

Hi, I recently got my first mac computer which is a macbook Pro. I was really excited when I got it but I also want to take really good care of it and make it last as long as I can so my question is do I still have to calibrate the battery on my mbp? because I read this article from apple stating that I don't http://support.apple.com/kb/ht1490. Please inform me thank you!

That is the exact article I was going to refer you to.

Similar Messages

  • 15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

    Hello All,
    I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
    I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
    I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
    I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
    My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
    Could this be a hard drive issue?
    Has anyone had similar symptoms and how was it resolved?
    Does anyone know what I can do to alleviate this issue?
    I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
    Thank you so much for your input!
    -Christina C.

    Problem description:
    The Hard Disk is failing.
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 7:59:28 AM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:3:43
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      HDV4 (disk0s2) /  [Startup]: 749.30 GB (712.10 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [invalid?] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      AdobePDFViewer: Version: 10.1.1 Support
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
      Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
      Avast Online Security
      Trovi Search for Safari
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          16% mds
          7% WindowServer
          1% loginwindow
          1% fontd
          1% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB com.avast.daemon
      86 MB Google Chrome
      52 MB Finder
      52 MB WindowServer
      41 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      13.45 GB Free RAM
      1.34 GB Active RAM
      944 MB Inactive RAM
      1.43 GB Wired RAM
      1.11 GB Page-ins
      0 B Page-outs

  • MacBook Pro 13' Early 2011: Still Slow After 16GB RAM Upgrade

    Hi,
    I have a MacBook Pro 13' Early 2011 running Yosemite. After the RAM upgrade to 16GB, the speed of the computer is still not satisfactory, having some lag times in launching softwares and startup. Please suggest me what to do. Below is the report. Thank you!
    Problem description:
    The computer is still running slow even after the RAM upgrade to 16GB.
    EtreCheck version: 2.0.11 (98)
    Report generated November 18, 2014 at 5:40:20 AM EST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:7:52
    Disk Information: ℹ️
      ST9320325ASG disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 318.84 GB (156.62 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
      [not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) Support
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
      [not loaded] com.wacom.kext.pentablet (5.3.0 - SDK 10.8) Support
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.rim.BBAlbumArtCacher.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
      [running] com.wacom.pentablet.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.rim.BBDaemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [not loaded] com.valvesoftware.steamclean.plist Support
    User Login Items: ℹ️
      Dropbox Application (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      DirectorShockwave: Version: 11.6.5r635 Support
    User Internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
      WebEx64: Version: 1.0 - SDK 10.6 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 318.84 GB Disk used: 162.22 GB
      Destinations:
      LACIE SHARE [Local]
      Total size: 350.07 GB
      Total number of backups: 5
      Oldest backup: 2012-07-17 01:12:57 +0000
      Last backup: 2014-03-19 07:05:24 +0000
      Size of backup disk: Too small
      Backup size 350.07 GB < (Disk used 162.22 GB X 3)
    Top Processes by CPU: ℹ️
          9% mds
          6% WindowServer
          1% BBLaunchAgent
          0% AppleSpell
          0% fontd
    Top Processes by Memory: ℹ️
      103 MB mds_stores
      86 MB Dropbox
      86 MB ocspd
      69 MB com.apple.WebKit.WebContent
      52 MB Safari
    Virtual Memory Information: ℹ️
      13.07 GB Free RAM
      1.71 GB Active RAM
      740 MB Inactive RAM
      1.66 GB Wired RAM
      1.31 GB Page-ins
      0 B Page-outs

    First go to the RIM web site and look to see if they have an uninstaller for the device you had.  Some times a reinstall of the application and then running the uninstaller is required for complete removal.
    If no uninstaller is available, then you will have to use Spotlight to find all items with 'Blackberry' and 'Rim' in the titles.  I would also download EasyFind and use that to locate such files.  Often it will locate items that Spotlight misses.
    Ciao.

  • HT201343 I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?

    I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Another solution is the Air Parrot.

  • I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

    I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

    It mostly depends on the damage that was done (the LCD, keyboard, etc) but yours does not turn on so I am assuming it was fully submerged and completely damaged. Therefore, I would think your warranty is most definitely void.
    When did this happen? How bad was it? Have you taken any measures to get it to dry? You can go online and you can find tips on how to dry it at least a bit so that it is not as bad, it might not get it to work, but it can help you prevent rusting, which would cause further damage thus reducing the probability of getting repaired/replaced. Also, do not try to turn it on unless you have tried to dry it as it will damage it even more (electricity + water = destruction). I would suggest giving this a try, and if it is still not working then it is probably worth a try with Apple, just go in for a consultation in terms of pricing. If they seem too high and/or the warranty is void, then you can opt for after-market products which significantly reduce the repair costs... as you would have nothing to lose anyway in terms of warranty.
    It's $3,000, that pays my rent. Even investing $1,000 would be better than just not giving it a try at all lol.

  • I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    There is no need for anyone to use 32-bit version anymore.
    Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
    Better support for today's hardware with larger video graphic memory and systems.
    Better memory management.

  • I have a MacBook Pro 13 early 2011. I can't use Gmail because it says my version of Safari (5.1.7 (7534.57.7) is not compatible. What can I do?

    I have a MacBook Pro 13 early 2011. I can't use Gmail because it says my version of Safari (5.1.7 (7534.57.7) is not compatible. What can I do?

    Niel, I found a way to download Safari 6.1.6 but it failed because the installer couldn't create the folder '/var/folders/lg/pqypcsnn715btrs106b9crpr0000gn/T//Install.3334NgcMxu"

  • Macbook Pro 13" Early 2011 Lag Spikes

    Okay let me just brief you on my Macbook.
    In September 2011 i bought a Macbook Pro 13" Early 2011 model, 4GB RAM, 2.7GHz Processor, you can get the rest on the site.
    ( http://support.apple.com/kb/sp619 )
    I bought it as a ex-display model, so you can imagine it already has some milage from it.
    Through the (almost) 2 years i've had it, apart from the odd overheat shutdown, and a 1 charger replacement, it's been no hassle, even with me constantly shutting it and moving it. It seems that all the issues are coming in bulk.
    I generally use the laptop for gaming, mostly World of Warcraft, sometimes Minecraft, and lately Starcraft, and Spellforce on BOOTCAMP or virtual machines.
    About 2 weeks ago, the laptop started refusing to charge, i couldn't understand if it was the charger (as i only replaced it a few months earlier and the cable was still in perfect condition) or the port itself in the laptop. I took my laptop to an Apple store, found it was the Magsafe on the cable, replaced it on the spot, but the reason why i'm saying this is i'm wondering why it broke so quickly, and if lack of power has anything to do with it.
    I've grown a liking to Spellforce so instead of having to restart into the Windows side of my Mac, i just use the Virtualbox Virtual OS i already have set up from when i used to work from home and have to use certain software on windows because Wine just couldn't cut it (and lets face it, Mission Control is awesome, then you go on Windows and everything just seems to cluttered). So i read the default specs for the game on Steam (2GB) so i give Virtualbox 2GB, but this was a MAHOOSIVE mistake, because as soon as i clicked start, it's been a down hill spiral.
    The computer immediately started lagging, to the point where the laptop was actually unusable, so i force restarted it by pressing down the power button for 5 seconds and i let it restart. After it booted, everything seemed fine (i expected nothing else) so i decided to only give it 1GB of RAM, and just turn down the settings to the lowest possible (which is something i've had to do with World of Warcraft recently. It used to be able to run on Ultra when i first got the laptop, now it struggles on low and if i have a browser up at the same time). Again, big mistake, it lagged to unusability. So i restart again, but this time it takes 5 minutes to boot, and once booted everything is so slow, so i decide to re-install the OS, so i get my flash drive and spend the next hour moving things over from my user folder because when i would try to move a folder that had 5+ files or something that was 100MB or larger, it would error out saying a certain file couldn't be read or written, and would cancel and remove everything else that was transfering at the time.
    So i restart but boot into the recovery option, and do a refresh the OS, and i let it download and install. I was surprised to see when it had all completed that it still had all my files, but it still ran slow, not as slow as before but definitely not as good as before, i would estimate at quatre the performance. So i assume that Virtualbox must have editted some system setting and my Mac thinks i only have 2GBs of RAM and not 4GB, so i search on how to reset the bootloader, and i was tried the alt + cmd + r + p, but after that when it booted, it came to the wallpaper but i was getting these popups that Finder had unexpectedly quit, so i click Okay a few times, they keep coming back up, so i look at the details and it says that the app had failed 500+ times before.
    So i put my Snow Leopard disk in, use Disk Utility and use erase on my Mac OS partition, then i re-install Snow Leopard, then i download and install Mountain Lion again, but the snails pace remains. I do alittle more research and someone suggested modifying the partition size by a few gigs or so to re-write it and reset certain variables attached, didn't work, even after a reboot.
    So yesterday i just put the Snow Leopard disk in, and i remove both partitons (Mac and Windows) and i make one partition. I install Snow Leopard and then Moutain Lion, and so far it appears that everything it back up to speed... however, i've been keeping a keen eye on Activity Moniter and "top" in Terminal, and my CPU usage and RAM usage are always relatively low. I always seem to have 1GB-2GB RAM free, and my Idle CPU always seems to be above 80%-90% but i'm getting these weird lag spikes. I notice it most when i try installing World of Warcraft again, the download speed averages around 3MB/s (my ISP is Virigin Media and i get 60Mbs/s fibre optic so i know it's not my connection failing) and then the app seems to freeze (stops refreshing the average speed, and then about 5-10 seconds later, it starts refreshing again but it's at 12-50KB/s. This also seems to happen a lot when i use web browsers.
    I have noticed something new, literally only about 30 minutes before i started writing this. There is a noise that happens every 2-4 seconds, it's pretty regular, it sounds like a grasshopper, or other chirping bug/insect inside my laptop. It sounds like metal scraping against metal, which is worrying. It's coming from the right hand side of the Magic Track Pad, which is where i believe the Hard Drive is. I've looked online and this seems to be a sign that the harddrive is dying.

    Yeah, the problem has been solved.
    Unfortunately, the solution is buying a new storage device.
    So if you're having these issues, i tried almost everything consumer possible, that's free anyway, and the hard drive was just too faulty to work properly. So backup all your stuff whilst you still can.
    I bought an SSD for around £80, only 120 gigs of storage, but i have iTunes Match so i don't need to have my films and music downloaded.
    If you're very mobile with your laptop, then i suggest getting an SSD. Lugging about a laptop with a storage device with moving parts is very very risky.
    As soon as i got a new storage device, everything was back to normal. It was like it was new again.
    Anyway, sorry i can't give you a free solution, but it's the only solution i got.

  • MacBook Pro 17" Early 2011 Model: Auto Shutdown/Restart Problem

    Hey guys!
    This is my first time to sign in, join the community, and ask a question or create a discussion. FYI, I really have little knowledge on tech stuff so please bear with me. Here's my problem, and I hope you can give out your suggestions:
    I have a MacBook Pro 17" Early 2011 Model which I have upgraded to OS X Mountain Lion.
    A month or two ago, it had started shutting down or restarting at random times. As time passed, this problem became more frequent.
    I finally decided to have it checked at Digital Hub, a licensed Apple distributor. After almost a week, they've finally diagnosed that the problem is with my battery. I got my MacBook pro back around 2 (two) weeks ago, and ever since then I had to use an outlet in order for it and myself to work properly. Right now, I'm still saving up to purchase new batteries.
    Recently, however, I've noticed that my MacBook Pro auto restarts even when plugged. Take note, RESTART and no longer shutting down completely. Upon further trials, I've finally concluded that it does so only during the use of heavy programs such as Diablo 3, Final Cut Pro X, and when rendering with iMovie. I have yet to try with Adobe products, particularly with Lightroom and Photoshop, and see if it does the same. But more or less, that's what I've noticed so far.
    Given that I still haven't purchased the battery yet, I know it's still vague to know the real probelm/solution. But with the given situations, what are you views on this matter? Please let me know. It'd be of great help. Thank you and I hope to hear from you soon!
    Brent Hughldridge A. Chua
    Multimedia Arts Student
    Philippines
    (Note, I'm a starting out Multimedia Arts Student and photographer. I have little knowledge of the industry for now, but I'm willing to learn. So please forgive me if I don't understand your suggestions at once if they are very in depth or technical.)

    Thanks for taking so much time in helping me.
    Just an update:
    2 loops/passes done - no errors.
    Called up Digital Hub and talked to the technician, he says there are 3 possible problems:
    1. Battery (which is still inside the laptop) may cause some disturbances with the electric current
    2. Software related - most likely re-formatting may be needed
    3. Video card may have failed, which means complete change of the logic board ----> worst case
    I'm crossing my fingers that it's either of the first two.

  • Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

    Hi, everyone, I need help here.
    Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
    I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
    The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

    Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
    Csound1 wrote:
    lokiman wrote:
    I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
    You too have a black screen in Windows 7. ?

  • My Macbook Pro (15" early 2011) got blue screen every i normally booted it. It only can enter the OS when it's in safe boot. Solution please.

    My Macbook Pro (15" early 2011, Mountain Lion, but after reinstall i change it to snow leo) got blue screen every i normally booted it. It enter the OS only when it's in safe boot.
    I've tried any solution that i got from the internet, such as:
    -Reinstalling the OS X (normal install & clean install)
    -Reset PRAM and SMC
    -Repair Disk Permissions and Repair Disk from Disk Utility (the result is OK. There's no problem)
    -Repair Disk Permissions manually (with Command + S at the beginning of booting)
    -Checking Hardware from Application Installer DVD (result is OK)
    -Checking from Mac Resource Inspector/MRI (result OK)
    -Booting from Recovery Disk is same problem, blue screen
    All of that solution is not working. My Macbook still got light blue screen and sometimes blue screen with lines after apple logo and spinning wheel is shown.
    HDD is in good condition because when it's checked on the other macbook it can be booted. But if you must know, other HDD can't be booted when its plugged to my macbook (blue screen again). If i do safe booting, it works but can't play video and music also photobooth. I got confused with this case.
    Any solution or comment? Thank you very much by the way

    Hi. I'm not trying to rush things, you may have a different problem, but your issue looks quite familiar to me. I recently had a problem with the discrete graphics card (the Radeon GPU) due to overheating, all because a faulty application of the thermal compound in the factory.
    In my case, the problem started slowly and intermittently, a few days after a gaming session (Quake 3) of about three hours (at the moment, I didn't realized that could be linked to the problem).
    This issue is being actively discussed in another threads in this forum, but so far there's enough evidence that it's been causing similar problems for 2011 MBPs owners: screen corruption, black/blue screens, and in some cases, a total inability to boot. Some of the threads I'm talking about:
    https://discussions.apple.com/message/13150366#13150366
    https://discussions.apple.com/message/21110132#21110132
    So far, and since the problem seems to affect only the discrete GPU (that's why you can boot in safe mode) a possible solution is to disable it by removing some extensions which prevent OS X from loading the Radeon drivers. This post describing the process (there are different files involved depending of your GPU version, so make sure you are moving the right ones):
    https://discussions.apple.com/message/22521574#22521574
    In the case your discrete GPU survived and is not permanently damaged, I personally had success by changing the thermal compound myself, which completely fixed the problem (at least for now). I've posted about it here:
    https://discussions.apple.com/message/22630561#22630561
    I hope you can find a solution, believe me I know the feeling when you see your expensive machine turning into a brick and it *****.
    Good luck!

  • What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    Hello Alex,
    It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • MacBook Pro 15 (Early 2011) i7 Freezes in Windows 7 (Boot Camp)

    I have a MacBook Pro 15 (Early 2011) i7 that consistently locks up/freezes (10 - 15 times per day) when in Windows 7 via Boot Camp. There are no error messages, no Blue Screen of Death, nothing....just locks up. I have tried reloading the Boot Camp drivers but it still happens. I have a suspicion it is related to the AMD Radeon HD 6750M driver. Any ideas on what could be causing the issue or how I go about troubleshooting the issue? Thanks.

    msconfig / chkdsk / Windows 7 DVD system repair or rollback restore point
    Ccleaner 3.09 - remove temp files and caches / also run Registry section
    Start: Run %TEMP% (select all) and remove all the contents in there
    Heat, fans, poor Apple drivers, I would not blame ATI but I would upgrade/install those.
    And yes BC 4.0 probably was not tested fully.

  • MacBook Pro 13" Early 2011 - External display issues

    I have an early 2011 MacBook Pro 13" (2.7GHz version) that I am using with an external non-Apple display.  I am having issues when MBP goes to sleep or trys to sleep the display.  The external display exibits one of a number of problems:  goes dark but does not power off the backlight or freezes up and requires being powered off then back on.  My display is an ASUS VW266H but it seems like this problem, or other similar problems, are happening with other non-Apple displays.
    In calling Apple tech support of 5/27/11 they indicated that this is a known bug and they are working on a fix.  There was software update released 5/4/11 to  "improve graphics stability, address issues with external display" named MacBook Pro Software Update 1.4 (http://support.apple.com/kb/DL1382).  I downloaded this and applied it but it made no difference.
    I experienced these problems with three different video adapters:  Apple's own mini DP to DVI, Belkin mini DP to HDMI and another brand of mini DP to HDMI also sold by the Apple store.
    So the questions are:
    1) Will Apple release another updated to address this incompatability or are they done with the issue given that they released the update mentioned above?
    2) Has anyone compiled a list of monitors that are know to work with these most recent MacBook Pros (the early 2011 versions with the Thunderbolt/mini DP combined ports)?
    If you have used the MacBook Pro 13" early 2011 with an external monitor please respond to this post with your experiences so we can all know what works.

    With my new 2011 13" MBP I'm having no latency issues using my '08 Samsung SyncMaster 2253BW DVI (digital) monitor. Sleep function awakens fine, goes to sleep 3-4 sec.
    I'm using a cheapie model Syba MDP to DVI connector; here on Amazon:
    http://www.amazon.com/Syba-High-Quality-DisplayPort-Adapter/dp/B00342UT02/ref=sr _1_1?ie=UTF8&s=electronics&qid=1307389450&sr=8-1
    I bought 2 in case one craps out on me...knock on wood. Good luck hope you find a solution.

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

Maybe you are looking for

  • Searching a binary search tree  written to a file

    hello I have a binary search tree which has 10 levels. Now I want to search a node after writing all the nodes to a file. Can anyone help me in doing this. A sample code would be great ... Thanks K

  • Problem with new computer booting for xp install.

    I just built a new K8N Neo today with a 3000+. The computer POSTs fine and I can start the install of xp. Setup will copy the files over and then reboot. When the computer reboots, I get the error "cannot load operating system". Ive tried all kinds o

  • ASC2.0 ant compc

    Hi, I have some issues using ant compc/mxmlc from air3.4 sdk. I used to compile my project with: <target name="build" depends="directory">                     <echo message="building ${OUTPUT_DIRECTORY}/${ARTIFACT}.swc"/>                     <compc o

  • Submit to is blank

    I've spent about a day and a half trying to setup a qmaster network up and running. With no success. I can get qmaster to que up multiple scenes, but they will only render using my computer. I've now set up a quad g5 as the Services and Controller an

  • Is this a joke? I pay for the maximum package and...

    I have been complaining incessantly for 6 months about my broadband which has a speed of circa 2002 --- What is that powerful router for?  I phone every single week -- nothing is addressed I must say I am offended -- what are my rights under the cont