Do JSP applications run under Oracle 8i?

How can I run my JSP application under Oracle 8i?
Do Oracle 8.1.5 or 8.1.6 include JSP server?

Oracle 8.1.7 (the next release of Oracle8i) will have the webserver to support JavaServlets and JavaServer Pages
raghu

Similar Messages

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMAN

Hi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

JSP's running under Resin server engine???

I have a JSP application that I am trying to move from running under Tomcat 4.0 to Resin web server engine.
When trying to run the application, I get this error:
java.util.MissingResourceException: Can't find bundle for base name AppProperties, locale
I think the error is happening because I have the AppProperties file in the wrong place under the Resin directory. Could someone please let me know how to properly use a Resource Bundle Properties file using Resin for my JSP's to run???
Please help...
Thank you...

Never mind....I got it....

How can I config my jsp application run via port 80 or 443

Hi All,
I had jsp application, I deployed into Oracle Application Server 10g, when I test http://myhost.mydomain:7781/myapp then it is ok.
Could you show me the way to config myapp run via default port 80 in Oracle As 10g. It is that if I input http://myhost.mydomain/ then it refrence to my jsp aplication.
Thank All.
Thanh.

Thanh,
check the $OracleAs_Midtier_Home/install/portlist.ini file for the ports that are configured for Oracle Application Server.
If port 80 wasn't configured for the HTTP Listener then you will have to change the Application Server listener settings to make this work the way you want it.
From the "Oracle Application Server 10g Administrator's Guide 10g (9.0.4) "
Using the Application Server Control:
Navigate to the Application Server home page and click Ports.
On the Ports Page, locate the Oracle HTTP Server Listen port and click the icon in the Configure column.
On the Server Properties Page, in the Listening Addresses and Ports section, enter the new port number in the Listening Port column. There may be more than one listening port listed. The only way to tell which is the non-SSL listening port is to choose the one with the old non-SSL listening port value.
At the bottom of the page, click Apply.
On the Confirmation Page, click No, you would not like to restart now.
Using Manual Steps:
Edit the following file:
ORACLE_HOME/Apache/Apache/conf/httpd.conf
Update the Listen directive with the new port number. Do not update the Port directive.
There may be multiple Listen directives in this file. Modify the Listen directive that is not enclosed in an SSL virtual host container. The easiest way to locate the proper Listen directive is to search the file for the old listen port number.
Save and close the file.
Run the following command:
dcmctl updateConfig -ct ohs
Frank

RE: How to have multiple application running under one server

 I have one server
 I have many application
 Question: Is it possible for me to have a weblogic properties file under each
 of this application.


If your question is whether you can run multiple instances of WebLogic
 (or multiple applications) on one server, the answer is yes. The only
 problem is, you must have a unique port for each of the servers to run
 on. I.e., they can not all run under port 80 which has obvious
 internet/network implications.
 This also means you have multiple weblogic.properties files etc. for
 each instance.
 We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
 multiple developers run their own instance on one box.
 Dano
 Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
 > No if you are running single instance of wls.
 >
 > Kumar.
 >
 > Sonny wrote:
 >
 > > I have one server
 > > I have many application
 > > Question: Is it possible for me to have a weblogic properties file under each
 > > of this application.

How to avoid of application running on Oracle 10g to be copied?

I am a newbie to the security issues, so I need your help, please, where to start / what to read:
I have an application running across many customers on Oracle 10g. I have faced lately that our users
can use their daily backups to establish a totaly new database on a same / different server
and point our application to use it as well.
Is there any way to avoid it? F.e. I thought to use SELECT * FROM v$instance; to get the server instance details, and
in result with some other function to obtain, let say, local server's (WIN2003) details,
such as HD Serial Number, MAC number or so and then to check these values each time user runs the application.
Is it the correct way? What are the basics here at all?
Many thanks in advance to all!

A lot of enterprises, however, actively avoid systems which are locked down to a particular server for very legitimate reasons. If my data center dies in the middle of the night, I sure don't want to have to call your mobile phone so that you can get to a computer, log in to the office network, and get me a new key so that I can finish my emergency failover. If I've got dozens of applications, I absolutely don't want to do that with dozens of different vendors.
It sounds like your problem, though, isn't that users are installing your software on multiple computers it's that they are accessing functionality they haven't licensed. That is generally a much easier problem to solve and doesn't require you to lock anything down to a particular machine. You can create a table LICENSED_CONTENT, for example,
CREATE TABLE licensed_content (
client_id NUMBER,
content_type VARCHAR2(30),
key RAW(128)
)In this case, KEY is, say, a hash (using the DBMS_CRYPTO or DBMS_OBFUSCATION_TOOLKIT packages if you'd like) of the client_id, content_type, and a bit of salt (i.e. a fixed string that only you know). When you sell a license to manage diamond content, you provide a script that inserts the appropriate row in the LICENSED_CONTENT table. When your application starts up, it reads the LICENSED_CONTENT table and verifies the hash before allowing users to access that type of content. This allows legitimate customers to move the software from one system to another but prevents them from accessing new functionality without a new license.
Justin

Opening a Powerpoint in JSP and run under Linux

Hi,
I need to have a JSP page that provides a link to open a powerpoint file and this JSP is to be run under Linux. When I try to click on the link in Linux to open the powerpoint, it gives me a lot of junk characters. Can somebody please help mi, thanks a million!

You have the mimetype for the HTTP response set to something other than what will make the browser start a powerpoint viewer and direct the content of the HTTP response to it.
In your jsp use the setHeader(String key,String key) method to set the value of "Content-Type" to the mimetype for powerpoint.
Of course the users must have browsers that are configured to launch a powerpoint viewer or plug-in. If you provide the correct mimetype and peoples browsers desn't have this, then they will get the "save to file" dialog box.

Applications running under Managed Account not able to connect to servers

My kids use a Managed Account on my MacBook (running Lion). They have two games (Roblox and Minecraft) which can not connect to their particular game servers. These games work fine when running under the Administrator account. I believe that the ports that these games are trying to connect to may be blocked when running under a Managed Account. The firewall is disabled. Is there a way to open up specific network ports to programs running under Managed Accounts?

Still don't have an anwer for you, but just a few thoughts... So it would seem that creating a Managed account automatically invokes some user account firewall settings, since the game works under your admin account. I was able to access the System Prefs under a managed account to see about opening up the port in question, but if this is indeed the problem, the firewall isn't the GUI kind.
It's possible that there would be a terminal command to do so, but I wouldn't have a clue about how to do that.

Can JDev 10.1.3 ADF application run in Oracle Fusion Middleware 11g?

Hi,
We have a 10.1.2.0.2 application server and our JDeveloper 10.1.3 ADF application is running in a separate 10.1.3 home because it was unable to run in the first one. We are thinking about upgrading to Fusion Middleware 11g and I'm wondering if anyone knows will I be able to set it up somehow so that the JDev application runs in this or would I leave it in the 10.1.3?
Thanks
Adam

I dont think this would be feasible till project fusion is through.
Thanks
Tapash

Crystal Reports for Eclipse issues running under Oracle Jdeveloper.

I am having issues trying to get a small application that I developed in eclipse that uses Crystal Reports to work with Oracle's JDeveloper OC4J embedded server. I can run the application fine and when I try to view a report I get a partial report rendering and then get the following exception: 2006-10-03 06:55:38.778 NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.IllegalStateException: Writer already retrieved at com.evermind.server.http.EvermindHttpServletResponse.getOutputStream(EvermindHttpServletResponse.java:882) at com.evermind.server.http.EvermindHttpServletResponse.getJspOutputStream(EvermindHttpServletResponse.java:877) at com.evermind.server.http.EvermindJSPWriter.initServletOut(EvermindJSPWriter.java:480) at com.evermind.server.http.EvermindJSPWriter.writeOut(EvermindJSPWriter.java:492) at com.evermind.server.http.EvermindJSPWriter.jspflush(EvermindJSPWriter.java:391) at com.evermind.server.http.EvermindJSPWriter.close(EvermindJSPWriter.java:361) at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1574) at sample20_reports._MartyRpt_2d_viewer._jspService(_MartyRpt_2d_viewer.java:143) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) Does anyone have any idea of what is causing this? I really need help fixing this issue. Any help would be much appreciated.Marty 

I agree with Rob that it is likely the OutputStream object throwing the error. Another option is to try the following code for your viewer code: // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** { // Create the CrystalReportViewer object CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer(); // set the reportsource property of the viewer IReportSource reportSource = clientDoc.getReportSource(); crystalReportPageViewer.setReportSource(reportSource); // set viewer attributes crystalReportPageViewer.setOwnPage(true); crystalReportPageViewer.setOwnForm(true); // Apply the viewer preference attributes // Process the report String output = crystalReportPageViewer.getHtmlContent(request, response, application); out.print(output); } // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** Regards, Sean Johnson (CR4E Product Manager)

Crystal Reports for Eclipse issues running under Oracle Jdeveloper(10g)

Hi All,
I am having issues trying to get a small application that I developed in eclipse (CR4E)that uses Crystal Reports to work with Oracle's JDeveloper OC4J embedded server. I can run the application fine and when I try to view a report I get a partial report rendering and then get the following Exception:
Also while inserting on the page Showing error on the page
java.lang.IllegalStateException: Writer already retrieved at com.evermind.server.http.EvermindHttpServletResponse.getOutputStream(EvermindHttpServletResponse.java:880) at com.evermind.server.http.EvermindHttpServletResponse.getJspOutputStream(EvermindHttpServletResponse.java:875) at com.evermind.server.http.EvermindJSPWriter.initServletOut(EvermindJSPWriter.java:525) at com.evermind.server.http.EvermindJSPWriter.writeOut(EvermindJSPWriter.java:537) at com.evermind.server.http.EvermindJSPWriter.jspflush(EvermindJSPWriter.java:436) at com.evermind.server.http.EvermindJSPWriter.close(EvermindJSPWriter.java:406) at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1689) at NEWPROJECTR.jspService(_NEWPROJECTR.java:89) [/NEWPROJECTR.jsp] at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:598) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:522) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Can any boby tell me another way to integate Crystal report with Jdeveloper
Sincerely,
Amol

Something is writing out to both the JSP Response Writer and OutputStream. Writer is for text and OutputStream is for binaries.
This typically happens, especially on WebSphere and Oracle OC4J, when exporting a Crystal Report in the viewer. The DHTML view is HTML text, but the exports are binaries.
I'd recommend putting Crystal Report Viewer object in a Servlet - there you'd have full control over what goes in Writer and OutputStream. Once in the Servlet, ensure you don't write anything out yourself, but let the viewer have full control over what goes out.
Sincerely,
Ted Ueda

Application Images under Oracle XE - how to configure an alias path ?

Hi,
I've installed an APEX application on XE that was developed under Oracle10g and the Apache (basically so I can have a portable demo system).
There are two images for the application that show the logo. Under Apache, they have been put in a directory and aliased in httpd.conf - as described on p419 of ProApEx.
My question is : how can I achieve this under XE ?
Ideally, I'd like to move my application to XE and so want to create the same alias - but, XE doesn't use Apache and I can't find how to get my images recognised. All the Apex images are there as the load script apxldimg takes care of that. Do I need to create a bespoke load script for my images so that they are taken from the database under XE ?
Thanks for any suggestions,
Steve

Hi,
you need to configure the access to the XDB repository via some protocol (WebDav or FTP), thereafter you will be able to put files in the special "file system" of XE.
You can find some information about this in a posting i wrote some time ago, where there are also links to the documentation:
http://oraclequirks.blogspot.com/2007/12/on-oracle-xdb-repository-ftp-webdav-and.html
I normally develop on XE virtual machines (running on a Mac) and then deploy to a standard 10G database running on Solaris without problems, it's just a matter of configuring the right protocols and keep the directories in sync.
Bye,
Flavio
http://www.oraclequirks.com

Flex application running under AIR takes a long, long time to start.

I have a flex application which runs on a desktop under AIR. The application has an assets folder with 3,500 mp3 soundclips totalling about 50MB. The problem is, the application takes around 90 seconds to load. I'm sure that AIR is scanning the application folder and doing something with the contents because if I delete the assets folder it loads in about 5 seconds. Does anyone know why AIR/Flex would do this, and why it doesn't exhibit the same problem if I run or debug in Flexbuilder on eclipse? It's making my killer app unusable!
Thanks
Paulo

Well, I've spent a bit longer looking at this now, and the problem appears to lie with my encrypted local store. The first thing that happens is for the app to read the product key from the ELS. But, it fails (for some unknown reason). So, the app seems to hang there for 90 seconds until it eventually renders the welcome screen. If I remove the assets folder it still fails to read from the ELS, but only takes a couple of seconds to start the welcome screen. This is where the scanning of the application folder seems to come into play, because if I remove the code which reads from the ELS the app starts within 2 seconds whether the asset folder is there or not.
I think the slow startup and the scanning of the assets folder are just symptoms of a different problem, i.e. a problem with the ELS. I don't have the same problem with my development environment though - it's only when I test deploy the application.
Thanks for your help on this problem EgorKDie. I think I should be able to resolve it once I can sort out why the ELS is being awkward.

Application runs under 1 account not another.. 10.4.11

Hi
I have a G5 with 10.4.11 with multiple user accounts. I have a application which will work under 1 account but not another. I've erased and re installed the software under the account I want it to work but it still does not work. I erased the software and all the associated folders for preferences and such and it still does not work.
I've tried as well to fix permissions and set all access to read write for all users on various folders for preference and plists... still nothing. My last resort is to archive and install the OS again.
Any direction would be helpful.
Thanks
Steve

Which application?
I've encountered something similar with FujiFinePix for downloading pictures from a camera. It will only work in my admin. account, but the camera's not mine.

Do JSP applications run under Oracle 8i?

Similar Messages

Maybe you are looking for