Do not process the undelivered mails-Mail adapter

Hi Experts,
In my scenario, I am using sender mail adapter. PI is successfully polling the mails and sending it to intended recipient.
Now, if the mail is undelivered to recipient then a notification indicating undelivered status will come to sender' s mail box.Next the requirement is, PI should not poll this undelivered message again since it has already polled it once.
Is there any way to do it ,is there any property in mail adapter configuration.
Thanks
Ayan

Hi Ayan,
>>Now, if the mail is undelivered to recipient then a notification indicating undelivered status will come to sender' s mail box.Next the requirement is, PI should not poll this undelivered message again since it has already polled it once.
If that option is selected then the mail will be moved to another folder and it will not be available at the second poll..
Regards
Suraj

Similar Messages

Can't use Find My Friends on iPhone due to Apple ID not being verified. Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!

Can't use Find My Friends on iPhone due to Apple ID not being verified.
Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!
So my options are:
Create a new Apple ID, use that and lose all the apps I've purhcased with it (a fairly substantial amount)
Somehow Migrate these purchases over to a new Apple ID
Apple let me change the primary ID for the account
Anyone else ran into this before?
I've tried accessing the mail through a mail application using the correct server information, and trying both the old 6 character password and the one I had to change it too after they updated the security guidelines - neither work.
Help would be greatly appreciated as I can see more services down the line not working without the address being verified!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can I change the font in notes in the view in mail?

How can I change the font in notes in the view in mail?

Use the Fonts menu. Either -
• go to the Format menu and select Show Fonts
• or, in the Note creation window, click the icon for Fonts -
In either case, once the Fonts window is open, select the text you want to change then choose the font characteristics (face, style, and size) from the Fonts screen.

I am not receiving the validation e-mail to enable me to validate my iCloud account, any ideas why?

I am not receiving the validation e-mail to enable me to validate my iCloud account, I have resent the e-mail a dozen times and checked the address but I receive nothing, any ideas why?

criscotto
Check your email account's SPAM folder - I use YahooMail and theirs is VERY effective, but sometimes thinks legitimate emails qualify - SOME Apple emails are often affected
ÇÇÇ

TS2621 I can access yahoo mail from safari but not from the iphone ipad mail icon after changing password

I can access yahoo mail from safari but not from the iphone ipad mail app after changing my password

Go into your settings and remove the account. Add the account again with your new password.
Best of luck- K.

Concurrent Manager not processing the requests

Dear friends,
We are facing a serious issue with our production instance since morning.
The concurrent managers are not processing the requests. As its month closing, a lot of requests are being piled up in the Standard Manager's queue.
The Standard Manager is up. We have verified that by the processes at OS and Concurrent Manager Administer form as well.
The Conc Manager Admin form shows:
Actual process: 50
Target Process 50:
Running Requests: 50
Pending Requests: 304
However, when we check from Concurrent Requests form by selecting Status=Normal, Phase=Running, its showing only 6 requests as running and rest all in pending phase.
These requests are running for long and no other requests seem to being picked up by the CM.
an urgent help is required as its production environment and all the users are complaining.
Thanks.

Its R12.1.1 Apps with 11.1.0.7 DB
We have found the issue. In the Concurrent Manager Administer form, when we clicked on the Requests Button, it shows a lot of the following requests:
Check Event Alert - ALECTC
This request is not shown in Concurrent Requests form.
We found that the Alert mails were not being sent. At OS level, we found 50 ALECTC OS processes were running.
We killed those and immediately Standard Manager started picking up the pending requests.
I am not yet sure of ALECTC processes. Can someone explain ???
Thanks.

JDBC Sender channel not processing the messages

Hello,
From yesterday onwards JDBC Sender channel not processing the messages. In CC monitoring it is showing in Green Led and status is functioning. Cahnnel is polling for messages to DB server as per polling interval. But it is not processing the msg's. Under Processing detials for cluster node it is showing only "Processing Started" for each polling interval.
I have done the check in DB server by executing the query in the channel, whether there are any records are exisitng or not. There are 1000+ records.
Previously the parameter "Disconnect from DB after processing each message" was not set. I have set the parameter and activated in Productiion. Still the messages are not processing by channel
What was the problem? How to rectify with this.
Cheers
Veera

Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)

OPP(Output Post Processor) not processing the report (XML Publisher)

Hi,
I have defined a concurrent program (XML Publisher report) then ran but failed with the errors below. I am running the report in Oracle E-Business Suite 11.5.10.2, thru a concurrent manager other than Standard Manager. My guess is that OPP(Output Post Processor) is not processing the request outputs coming from a different manager/work shift since requests ran thru Standard Managers are all OK.
In the OAM(Oracle Applications Manager)-> OPP, there is only 1 process allocated for both Actual and Target. If we increase the number of processes, will it work?
/home/app/oracle/prodcomn/temp/pasta19356_0.tmp:
/home/app/oracle/prodcomn/temp/pasta19356_1.tmp: No such file or directory
Pasta: Error: Print failed. Command=lp -c -dkonica4 /home/app/oracle/prodcomn/temp/pasta19356_1.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
Anybody who has experienced similar issue?
Thanks in advance.
Rownald

Hello,
Just an additional tests info. We have 2 concurrent managers which I think is affecting the XML report output - Standard Manager(running 24 hours) and a Warehouse manager (9am-4:15pm).
When I run the report before or after the Warehouse manager workshift(9am-4:15pm), the output is fine - which means PDF is generated and Pasta printing is OK. However, when report is run between 9am-4:15pm, the report only shows XML output with an error in Pasta printing(above). I also found that re-opening the output(ran prior to Warehouse workshift) on the period between 9am-4:15pm would also result to just an XML output instead of the previous PDF.
Anybody who has experienced similar issue like this? Any idea? The report is not directly defined as "inclusion" in the Warehouse manager, only the program calling it. Any effect of multiple concurrent managers in the XML Publisher output?
Thanks in advance for your ideas..

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Af:commandImageLink not processing the aboulite path for displaying image

All,
We are required to display an image in the UI. The image is not stored in the deployed ear file. It is stored in the "*<DOMAIN_HOME>\Inventory\images*".
Where DOMAIN_HOME=D:\JUPITER_CORONA\system11.1.1.3.37.56.60\DefaultDomain\inventory
I would process an image absolute path in the af:commandImageLink tag as follows,
*<af:commandImageLink "icon=file://D:/JUPITER_CORONA/system11.1.1.3.37.56.60/DefaultDomain/inventory/images/equipment.png" text"equipment" shotdesc="icon" />*
The problem is that the above tag is not processing the above mentioned absolute path and displaying text "icon" instead of actual icon image. As per the ADF documentation the tag processes absolute path as well.
Can someone suggest as to where I am going missing.
regards,
Chandra

I was not able to get what you want very well, the situation is a little bit un-usual,
but for solution I suggest the below way.
write a servlet/JSP that return the image (it is like copying the file, read the image from absolute path and send it to the OUTPUTSTREAM of the response aslo remember the MIME and the write filter for the jsp/servlet that end with .jpg or any extension for the image.)
then in the jsf page write the below code.
<af:commandImageLink icon="/jspOrservlerpath/servlet/filename.jpg" text"equipment" shotdesc="icon" />
your servlet (get the filename.jpg and then find the file and return it)
this solution is very common for cases that the file is not available physically such as when you want to read it from another place(your case) or database.
I hope this help you.
I can send you the source for the servlet/jsp if you want.

Windows setup could not process the Catalog setting

Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
If I don't use any file installation is performed correctly.
Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
See setup log files under [X:\Windows\panther] for details."
However, when I check this folder in Windows Server there isn't any updated log file...
My unattend.xml file contains:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Type>Primary</Type>
<Size>25000</Size>
</CreatePartition>
<CreatePartition wcm:action="add">
<Order>2</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
<Extend>false</Extend>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Extend>true</Extend>
<Format>NTFS</Format>
<Label>Media</Label>
<Letter>D</Letter>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<WindowsDeploymentServices>
<Login>
<Credentials>
<Domain>*********</Domain>
<Username>Administrator</Username>
<Password>*********</Password>
</Credentials>
</Login>
<ImageSelection>
<InstallImage>
<ImageGroup>ImageGroup1</ImageGroup>
<ImageName>TCImage</ImageName>
<Filename>Install.wim</Filename>
</InstallImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Anyone know how to fix it?
Regards

Well, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
http://oi61.tinypic.com/sxkjt5.jpg
I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
Regards

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

The Facetime can not process the registration of my Apple ID, I've tied several times, and it always says " The server encountered an error processing registration."

The Facetime can not process the registration of my Apple ID, I've tied several times, and it always says " The server encountered an error processing registration."

I had this problem and also was unable to directly access the App store and could not get iMessage to work. I disabled the firewall protection on my third party virus protection software, rebooted and was good to go. iMessage also works and I can directly access the App store, rather than enter via iTunes.

I want to update my credit card info. I have moved to a new country and can not process the payment. PLEASE HELP

i want to update my credit card info. I have moved to a new country and can not process the payment. PLEASE HELP

The same Adobe ID can not be used to make payment if you have changed country. To get complete resolution, please contact Adobe support Contact Customer Care.
Regards
Rajshree

Cisco Could not process the RSN and WARP IE's. station not using RSN

I keep getting this over and over in my syslog. I haven't been able to find anyhting out about it.
Could not process the RSN and WARP IE's. station not using RSN

Sounds like the infrastructure is configured for WPA1 and the client for WPA2.

Do not process the undelivered mails-Mail adapter

Similar Messages

Maybe you are looking for