"do not use proxy server for local (intranet) addresses" IEM setting

Hi, i would like to find out where can i find the following setting in GPO which used be found in IEM.
"do not use proxy server for local (intranet) addresses" Enabled/Disabled
as currently im setting the IE proxy exception list via GPP, i don't see that option.

Hi,   
As you notice that when we use GPP Internet Setting item to configure bypass proxy servers, there is no "do not use proxy server for local (intranet) addresses" option in GPP Internet
Setting item. However, as suggested by zanderol24’s reply, we can use bypass proxy server for local addresses option under
Proxy server to achieve the same function.
Best Regards,
Erin

Similar Messages

  • JRE proxy bypass for local addresses always bypasses proxy

    Hi all,
    I'm currently dealing with an issue with the proxy configuration in java.
    Situation: I need a proxy server to connect to the internet, and I have some addresses configured in Internet Explorer that bypass the proxy.
    example of the way I configured it : *.google.com;212.115.*;62.69.179.198
    The address that I am trying to reach is not in the bypass list, or in any of the excluded ranges in the bypass list.
    Initially I had java configured using browser settings. I thought it did not pick up the browser settings at all.
    However after configuring the proxy manually in java it was still not working.
    During the research I came to the conclusion that as soon as I enable the "bypass proxy server for local addresses" in Internet Explorer, or manually in java.
    The JRE client automatically bypasses the proxy and is always using "proxy=direct" . As soon as I disable that feature it starts using the proxy server.
    I have no idea why this is happening ?

    Your message was an eye opener for me. Thanks!
    You were right, that option shouldn't be enabled. During testing I got confused and was told that option needed to be enabled to enable the exception list.
    But that was a stupid assumption.
    I disabled the option bypass proxy for local addresses and just filled in the exception list and now it works again.

  • Why does my laptop use a proxy server for mozilla or chrome when i check in internet explorer it sais my system isnt but it is it jumps back to a proxy server in mozille when i tick no proxy ?? help please im not wizzy thanks

    Why does my laptop use a proxy server for mozilla or chrome when i check in internet explorer it sais my system isnt but it is it jumps back to a proxy server in mozille when i tick no proxy ?? help please im not wizzy thanks

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.com/kb/Preferences+are+not+saved

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Can I use Leopard Server for a few things without a static IP/DNS mapping?

    Caveat: I'm pretty capable at setting up and running macs, but not a crack server admin or anything like that. I don't write code and my eyes start to glaze over when you start talking about Kerbos and the like...
    Question: I'd like to use Leopard server for a few things on my local network - with some vpn access to the same services:
    - iCal server (the most important feature) for 3 users
    - File server services for Time Machine (yes, base Leopard can do this)
    - vpn access into the iCal server for one user
    Do I have to go through the headache of switching over from a dynamic IP to a static IP, setting up DNS mapping, etc? Or is there a simpler way?
    Any help appreciated. Thanks

    Caveat: I'm pretty capable at setting up and running macs, but not a crack server admin or anything like that. I don't write code and my eyes start to glaze over when you start talking about Kerbos and the like...
    Question: I'd like to use Leopard server for a few things on my local network - with some vpn access to the same services:
    - iCal server (the most important feature) for 3 users
    - File server services for Time Machine (yes, base Leopard can do this)
    - vpn access into the iCal server for one user
    Do I have to go through the headache of switching over from a dynamic IP to a static IP, setting up DNS mapping, etc? Or is there a simpler way?
    Any help appreciated. Thanks

  • Remote Desktop "Bypass RD gateway server for local addresses" no longer working in Windows 8

    Hi,
    After installing windows 8, it seems like the "Bypass RD gateway server for local addresses" is no longer working.
    In Windows 7, when the option is checked, I could have the server name set always and the client will automatically detect whether to use the RD gateway or not. For example, from my house, if I am connecting to a computer at my work, which requires
    the RD gateway, it will automatically pops up the dialog for authentication method. However, if I connect to a computer in my home network, it will just automatically connects without asking authentication for the RD gateway.
    However, after installing windows 8, this does not seem to work as expected anymore. The option is checked but the Windows Security dialog pops up in both situations and so i have to either save the rdp file locally and pin it to the taskbar or switch between
    disabling and enabling the RD gateway whenever I need to connect to different machines.
    Is this a regression in Windows 8? Is anyone else experiencing the same issue?
    Thanks

    Another way to resolve this issue for me, beside of configuring RDP to connect directly to server also on unmanaged network, will be to turn the "wifi" subnet in a managed network, as the "wired" subnet is.
    The differences between thoses to subnets, dynamically assigned by the same DHCP server, are:
    The "wifi" is in a private IP range, the "wired" is in a public IP range
    There's an ACL on the "wifi" subnet, not on the "wired"
    The next step is to compare frames send/received when on the two networks. Something will likely tell for the network to be managed.
    Beside, I'm still searching informations about NLA, which is responsible for setting a nework as managed or not.
    Here are some clues:
    http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
    http://social.technet.microsoft.com/Forums/windows/en-US/49ea0a6b-9c03-407d-8e26-24a92849a282/network-location-awareness-signature?forum=w7itpronetworking
    If anybody has official MS informations about NLA (A for Awareness and not Authentication), please share!

  • How to set username and password when using Proxy class for SOCKS5?

    Hi all,
    I use the proxy class for SOCKS5, so need to set username and password, I don't find where can I set the value. whether the API support it.
    Thanks in advance!

    System.getProperties().put("proxySet", "true");That does nothing. Remove.
    System.getProperties().put("proxyHost", getProxyHost());
    System.getProperties().put("proxyPort", getProxyPort());You should be setting socks.proxyHost and socks.proxyPort here.
    System.setProperty("java.net.socks.username", getSOCKSUsername());
    System.setProperty("java.net.socks.password", getSOCKSPassword());
    Authenticator.setDefault(new ProxyAuth(getSOCKSUsername(), getSOCKSPassword()));You either need the first two lines or the third, not both. See the last link posted above.
    1. After I set the value, I connect internet by proxy, how the proxy server knows the values?Because Java tells it during the SOCKS handshake.
    2. In my app, I just set the values in the system properties, then JVM does remaining work? Remaining work is not concerned?Should be OK unless you have to connect to a different SOCKS proxy from the same JVM, but that kind of thing is problematic anyway due to the curious Authenticator design which is set globally, not per connection as you might expect.

  • Connect to Internet use proxy server (N82/WLAN)

    I can not connect my N82 to Internet use proxy server

    15-May-2008 09:10 AM
    duchung91 wrote:
    I can not connect my N82 to Internet use proxy server
    Hi I have had the same problem but think I've cracked it with the help of the IT guys at work.
    Steps:
    1)Goto Wifi wizzard,
    2) find the network you want to connect to.
    3) Click on options
    4) click on 'define as access point'
    5) enter the key when prompted. Go back to main screen.
    6)Now goto tools, (from main screen), settings, connection, access points.
    Find your network, click on options and then edit. Check your details are correct.
    7)Click on options, advanced settings. Type in your proxy address and port number. Get back to the main screen.
    8)Click on the web icon. Find your network. You might have to scroll past the standard gprs networks.
    9) Surf (hopefully).
    This worked for me. I hope it will for you too. Not an expert but just determined.
    Dan

  • When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

    When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi  using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

    It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
    I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
    Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
    To answer your questions,
    1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
    2. Make sure the two iPhones have different names to reduce sync/restore issues.
    3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
    Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
    Let me know if you need any more tips for iPhoning across the pond.

  • Problem while connecting to site using proxy server in weblogic 8.1

    Hi All,
    I am able to connect to the site www.testtest.com when i am running the below
    program out side a bea weblogic server. but i couldn't able to connect to the
    www.testtest.com when i am accessing thru a progam that was running in weblogic
    server. i am getting the below exception
    Tried all: '1' addresses, but could not connect over HTTP to server: 'www.testtest.com',
    port: '80'
    I am using weblogic server 8.1. Pls help me out in solving this.
    import java.io.*;
    public class testurl
    public static void main(String[] args)
    try
         String username = "username";
         String password = "password";
         String proxy_internet_address = "111.111.12.12";
         String proxy_internet_port = "80";
         String urlString ="http://www.testtest.com/";
         java.net.Authenticator.setDefault(new SimpleAuthenticator(username,password));
         java.net.URL url = new java.net.URL(urlString);
         java.util.Properties systemProperties = System.getProperties();
         systemProperties.setProperty("http.proxyHost",proxy_internet_address);
         systemProperties.setProperty("http.proxyPort",proxy_internet_port);
         java.net.HttpURLConnection aConnection = (java.net.HttpURLConnection)(url.openConnection());
         aConnection.setDoInput(true);
         aConnection.setDoOutput(true);
         aConnection.setUseCaches(false);
         aConnection.connect();
         java.io.InputStreamReader insr = new java.io.InputStreamReader(aConnection.getInputStream());
         java.io.BufferedReader br = new java.io.BufferedReader(insr);
         String s="";
         String textString =null;
         while((textString = br.readLine())!=null)
         s = s + textString;
         }//end of while
         br.close();
         aConnection.disconnect();
         PrintWriter pw = new PrintWriter(new FileOutputStream("test.html"));
         pw.println(s);
         pw.close();
    }catch(Exception e){
         System.out.println(e.toString());

    I have a similar problem. I want to connect to a URL, but not using proxy. From outside BEA or in BEA 6.1 it works OK, but not in BEA 8.1.
    Did you get to solve your problem ?

  • How to set a Proxy Server for appletv

    The network I'm on requires that I set a Proxy server to get out to the internet.
    Is there anyway to specify a Proxy server for AppleTV?

    Hi Red-Baron,
    The Apple TV does not support Proxy Server configuration (http://docs.info.apple.com/article.html?artnum=305010). An alternative is to enable internet sharing on a computer and have the Apple TV connect to that computer.
    Regards,
    John

  • Problem using application client for local stateful session bean

    Hi,
    I have deployed a local stateful session bean in Sun J2EE 1.4 application server.
    On running the applclient for the stateful session bean application client i get the following error:
    Warning: ACC006: No application client descriptor defined for: [null]
    cant we use application client for local stateful session beans. becoz the application runs smoothly when i changed the stateful sesion bean to remote.

    Hi,
    No, an ejb that exposes a local view can only be accessed by an ejb or web component packaged within the same application. Parameters and return values for invocations through the ejb local view are passed by reference instead of by value. That can't work for an application client since it's running in a separate JVM.
    --ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • JobOwner doesn't have permissions to use proxy 1 for subsystem CmdExec

    Hi All, 
    I got a strange issue on my SQL Jobs which run with Proxy. Some of the times, the SQL jobs run under job owner, instead of proxy account. Furthermore, it causes the SQL jobs failed. 
    "JobOwner doesn't have permissions to use proxy 1 for subsystem CmdExec"
    Kindly need an assistance on this issue.
    Note*: I have another solution by changing the job owner of the SQL jobs to user account of SQL Agent service. But in this case I want to keep current the job owner. 
    Thanks, 
    HR

    can you confirm if you did the same as explained in the last part of the blog?
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/10/14/who-owns-my-job-and-who-runs-it.aspx
    Also could you confirm if your proxy account has access to the subsystem and if not check this link to update it.
    http://msdn.microsoft.com/en-us/library/ms186760.aspx
    select ss.subsystem as 'subsystem name', sp.name as 'proxy name' from
    msdb.dbo.syssubsystems ss inner join msdb.dbo.sysproxysubsystem sps
    on ss.subsystem_id = sps.subsystem_id
    Inner join msdb.dbo.sysproxies sp
    on sps.proxy_id = sp.proxy_id
    You could run this to see if the proxy has access to subsystem.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • Use MacMini server for windows apps and save for windows files ?

    My question : Office equiped mixed computers , aslo Windows and Mac,
    Could we use MacMini server for both machines, working by windows apps and / or to save and work with windows files on MacMini server  and with Mac as well?
    We woud use it for normal office work and get it by internet from other places as well
    windows apps: merchandising, invoice, word, excel, pictures editing, Outlook Express + the Mac apps
    thnx ,
    MACIren

    In general what you can do is: in OS X, use Windows in virtualization (aka emulation), as a "virtual machine" with VMWare Fusion, Parallels, or Oracle VM Virtual box.
    That way you have both operating system open side by side without having to reboot into one or the other operating system.
    Not sure whether you need a Mac Mini Server per se to do that, I do that with my MacBook Pro for instance. But the server would help since it has a quad-core CPU (more cores that you can dedicate to the virtual macine), and you can put the virtual machine on the second harddrive for better disk access performance. Was there some particular reason you were thinking of the Mini Server -- do you want to use server side Windows apps?
    Again I have that setup on my MacBook Pro using VMWare Fusion with an XP virtual machine. In the Windows, I only use Office 2003 and some company apps that are Windows only. With Fusion (and I'm sure the other apps can do it as well) you can set a "shared" folder so both Windows and Lion will see the contents of it for reading and writing. I believe with Fusion you can also do your entire Home directory, but I prefer to limit it to a single shared "work" folder.

  • Media Encoder CC not using GPU acceleration for After Effects CC raytrace comp

    I created a simple scene in After Effects that's using the raytracer engine... I also have GPU enabled in the raytracer settings for After Effects.
    When I render the scene in After Effects using the built-in Render Queue, it only takes 10 minutes to render the scene.
    But when I export the scene to Adobe Media Encoder, it indicates it will take 13 hours to render the same scene.
    So clearly After Effects is using GPU accelleration but for some reason Media Encoder is not.
    I should also point out that my GeForce GTX 660 Ti card isn't officially supported and I had to manually add it into the list of supported cards in:
    C:\Program Files\Adobe\Adobe After Effects CC\Support Files\raytracer_supported_cards.txt
    C:\Program Files\Adobe\Adobe Media Encoder CC\cuda_supported_cards.txt
    While it's not officially supported, it's weird that After Effects has no problem with it yet Adobe Media Encoder does...
    I also updated After Effects to 12.1 and AME to 7.1 as well as set AME settings to use CUDA but it didn't make a difference.
    Any ideas?

    That is normal behavior.
    The "headless" version of After Effects that is called to render frames for Adobe Media Encoder (or for Premiere Pro) using Dynamic Link does not use the GPU for acceleration of the ray-traced 3D renderer.
    If you are rendering heavy compositions that require GPU processing and/or the Render Multiple Frames Simultaneously multiprocessing, then the recommended workflow is to render and export a losslessly encoded master file from After Effects and have Adobe Media Encoder pick that up from a watch folder to encode into your various delivery formats.

Maybe you are looking for