Do we have any functionality in OBIEE that does Rolling Difference

Hi Gurus,
In one of my report we have to calculate what is the Projected Available Inventory Quantity. The Report has columns for an Item number how much quantity has been planned for using which is GROSS REQUIREMENTS and the other one gives the BEGINING INVENTORY.
The pseudo report, pivot view
2feb 19feb 16feb 23feb
Item 123 Gross Requirments 1 0 2 5
Begining Inventory 659 659 659 659
Projected Available 658 658 656 651
I need to calculate this Projected available column the way we need to calculate is in the first coloumn we have 659 as Begining Inventory Gross Requirments as 1 so the projected available becomes 659 -1 =658. on 19 feb when i calculate the projected avaiable i should pick it up from the previous weeks projected available and subtract gross requirments from it so wheich will be 658-0=658 and then on 16 feb I have 658-2=656 and so on. How do I calculate this projected available column. Unfortunaetly I dont have access to the RPD :((
Waiting for your inputs.
Thanks in advance.
Chary

Try using RSUM().
you can use Running sum in formula for that measure and tweak it to match your requirement.
Vinay

Similar Messages

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • HT201272 I no longer have any of my pcs that I had registered on iTunes and I am at my limit on the number of registered devices  how do I unregistere old machines that I no longer have so I can get my old music that I have down loaded.?

    I no longer have any of my pcs that I had registered on iTunes and I am at my limit on the number of registered devices  how do I unregistere old machines that I no longer have so I can get my old music that I have down loaded.?

    Go to your account in the iTunes Store and look for the De-authorise All button in your account's details. Use the De-authorise All and then authorise the PCs you still have.

  • How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account

    How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue

    you can try:
    *Wireshark: http://www.wireshark.org/download.html

  • Do we have any WMI class so that we can use it for Drive Extension?

    Do we have any WMI class so that we can use it for Drive Extension?

    Could you please provide some more information about what you are trying to accomplish? 
    Do you need a WMI class because you are trying to write a program?
    By 'drive extension' do you mean extending a volume that resides on a drive?
    If trying to accomplish this via scripting, you can readily use diskpart.
    You don't say what operating system you are working with - PowerShell 4.0 that comes with Windows 8.1 and Windows Server 2012 R2 has a Resize-Partition cmdlet.
    I could go on guessing, but more information from you would be helpful.
    .:|:.:|:. tim

  • My Email does not have any functions on the bottom bar?

    My Email does not have any functions on the bottom bar?
    I open an email and there no functions to delete forward or reply with.  Anyone have an idea?

    Hi
    Just to clarify what your saying under menu > settings > Connectivity the only option you can see is Bluetooth? There are no other options to select?
    Because under the connectivity menu you should be able to Network, WiFi, Bluetooth, USB, Settings, Connection manager, Mobile data tracker, Data Transfer, Video sharing, Admin settings and play via radio.
    All the options should be visible on the connectivity menu on a N8 with Nokia Belle installed.
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • TS1398 After updating to ios 6 my iphone 4 would no longer connect to my home wifi. At work we have a free wifi connection that does not require a password. However my wifi at home is password protected. I have the right password. It works on my ipod touc

    After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!

    I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
         One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
         to do this on a motorola router: type 192.168.0.1 in your address bar.
    username: admin and password:motorola if you have not changed the factory defaults.
    Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
    The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
    There is a fair bit of buzz about this issue out there, some other things I've seen:
    This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
    Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
    IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
    Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
    Good luck, more to come if I figure out anything else, and please post any solutions you may find.

  • How do I hook up MIDI to my Mac? I have a new I/O that does not have MIDI in/out.

    How do I hook up MIDI to my Mac? I have a new I/O that does not have MIDI in/out. I do have a M-audio Midisport 1x1.

    Yall rock.  Just tested Back to my Mac with my phone's hotspot and it worked!  and so does airplay!  Much Much appreciated!!
    For double NAT the reset didn't work at first and I had to unplug all the connections but eventually got it back.  I also checked "Enable detection of router-behind-router conditions" in the RG.  Not sure if that did anything but I'm not seeing any AE warnings anymore. 
    Thanks again!

  • HT3371 My Macbook Pro does,nt seem to have any life in the battery does it need a new one

    My Macbook Pro does,nt seem to have any life in the battery does it need a new one

    You can check the actual capcity by opening the "System Information" application in the folder "/Applications/Utilities".
    Then you can select the information section "Hardware > Power" to see the information regarding the battery:
    The important information is highlighted in the image above.  The ratio of Charge Remaining (when fully charged) to Full Charge Capacity is a good metric of how "healthy" the battery is.  The Number if cycles is another indicator.  The higher the number of cycles the lower I would expect the ratio of Charge Remaining (when fully charged) to Full Charge Capacity.

  • I have an itunes gift card that does not work what should I do?

    I have an itunes gift card that does not work what should I do?

    Give me more details (but don't state the code).

  • Do I have any function/way to divide the rows into un-equal size buckets?

    Just like the function NTILE divides the rows into almost equal size buckets, do we have any way to divide the rows into un-equal (randomly decide) buckets so that eg. I can get 4 rows in bucket_1, 38 rows in bucket_2, 17 in bucket_3, ..... Only things is that each bucket should have rows from 1 to 50. (fixed limit).

    with source_table as (select object_type, object_name from all_objects where rownum <= 100),
         t            as (select rownum as rn, s.* from source_table s),
         cnt          as (select count(*) cnt from t),
         bucket       as
         ( select bucket_id, bucket_width,
               sum(bucket_width) over (order by bucket_id) - bucket_width + 1 as rn_start
             from
             ( select level as bucket_id, ceil(dbms_random.value(0, 50)) as bucket_width
                 from cnt
                 connect by level <= cnt
    select bucket_id, object_type, object_name from t, bucket
      where rn between rn_start and rn_start + bucket_width - 1
      order by bucket_id
    ;

  • I need to know how to deauthorize itunes sync.  I don't have any of the computers that it were previously synced with iphone

    I need to know how to deauthorize a computer for itunes sync but don't have any of the other computers where itunes was previously synced.

    Read this. You will need to deauthorize all computers. If you don't have all 5 computers authorized, apparently this will not work. You have to reach the 5 computer limit first.
    https://discussions.apple.com/message/12641802

  • I have a old excel file that does not show hiding cell boxes on my Mac.

    I have a old excel file that has some hiding info. in some of the cell boxes.  I can not see them on my Mac computers.  When I click on the cells to see the hidden info. it does not show up.

    Are you using Mac OSX version of Excel or the Windows version of Excel?  Regardless being specific to Excel, it would be best to ask in the Microsoft Office forums.
    Microsoft Office for Mac forums
    http://www.officeformac.com/productforums/
    Microsoft Office for Windows forums
    http://answers.microsoft.com/en-us/office

  • I have a sonos music system that does not yet work with Lion and will not for about 3-weeks.  I need to uninstall lion and go back to snow leopard, how do I do that?

    I have a Sonos music system that is not yet compatible with Lion and will not be for several weeks.  How do I uninstall Lion and go back to Snow Leopard?

    While we all have MacBooks only a few have Lion. There's a Lion Support Community. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Do we have any functionality to handle stale cheques in sap

    Dear Guru's,
    I need the functionality to handle stale cheques in sap.  If any configuration is required then plz let me know, it's urgent.
    Thanks in Advance,
    Kishore

    Hi,
    You have to void cheques individually.
    What we are doing is that we have done a Z program calling FCH9 and created a BDC for mass void
    in selection you give the date range so that you can choose a date prior to six months.
    Get the help of an ABAPer
    Assign points if useful
    Sunoj

Maybe you are looking for

  • Can I import and view from a camara

    I was reading on the new that there are a few ways to import pictures from my Canon G5 camera. The two most common are the Belkin compact flash reader, or the apple iPod camera connector (I think it is called). the thing that plugs into the ipod and

  • Cross Domain Connection Issues with Test Controller

    I am having trouble resolving a problem I have connecting a build agent with the test controller in a cross domain environment.  I have purged out the actual machine names, domain names, and IP addresses just in case that is a security concern.  Situ

  • How to access HTTP Header from within Web service?

    Hello, Is there a way to access HTTP header variables like CONTENT_TYPE, CONTENT_LENGTH from within Web Logic web service. I was able to get the HTTP header variable from within Apache AXIS services by calling context.getProperty(HTTPConstants.MC_HTT

  • Use standard PP in Footwear industry

    Dear Guru!        My client intend to use PP standard for Footwear industry(Not use AFS), every product has 2 dimention: Color and Size.      Do you have any experiences like:            - GAP            - Issue            - Business process. Regards

  • The Apps tab does not load.

    Just signed up for creative could. I just get a spinning dial but no applications to download. All of the other tabs (home, assets, community) load the information. Any help would be great.