Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...

There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/

Similar Messages

The picture ID on my outgoing Mac mail is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo. I have no link or connection with anybody or other accounts whatsoever, and I don't have ANY third-party networks myself.

The picture ID on my outgoing Mac mail is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo. I have no link or connection with anybody or other accounts whatsoever, and I don't have ANY third-party networks myself. HELP!!!

Nobody but you sees that photo, it does not appear on outgoing emails.
To remove the picture rather than change it, open Address Book and select your personal card, then from the menubar select Card > Clear Custom Image. Now the system will use Apple’s generic user picture in the login window and System Preferences’ Accounts pane. Mail and Address Book will remain blank until you designate a new picture in Address Book or System Preferences > Accounts.

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Is there any third party app to recover a lost backup password for an iPhone on mac?

I accidentally restored my iPhone 4 to factory settings after a problem in the music app. I do have a backup but it is encrypted and I do not know the password. All password retrieving apps I've found are not supported by mac. Can someone point me to one that does work? Preferably a free one? Thanks!

Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Restart the computer.
Quit MacKeeper before dragging it to the Trash.
Don't empty the Trash. Let MacKeeper delete itself.
Don't try to drag the MacKeeper Dock icon to the Trash.

I have problem with daq..when it is connected with laptop it asks for all the options like sampling rate etc..It displays building VI and it stops..it is not processing further..cau u plz help to solve this problem

i hav problem with daq initialisation...plz help to solve the above mentioned issue

Hi muthu,
we also have a problem: to less information…
- What is connected to your laptop?
- What is "it" in "it displays building VI"? Do you use the DAQ Assistent ExpressVI?
- What means "plz"?
And could you please put less text in the title of your message and more text (with relevant information) into the message body?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager. Why ?

Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager. Why ?

http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Upload Third Party Software Component and assignment to Track

Hi,
I created a Track where I have to add a Third-Party Software Component (HMVCGLXBRIDGE.sca).
How can I upload Third-Party Software Components and make it selectable for adding it to the Track under SAP NetWeaver Development Infrastructure > Change Management Service > Landscape Configurator > [Track] > Add SCu2026
THX for any comment
Regards

Hi Pascal,
my structure in detail
Track: BOM
Product: SalesBOM
Software Component: SC_SALESBOM
Dependencies (Context: BuildTime): BPEM Buildt 7.12, ..., HMVCGLXBRIDGE, ..., VC FREESTYLE KIT 7.12
--> I added the SC "HMVCGLXBRIDGE" afterwards in the SLD und after an update and synchronisation in CMS it is also not shown
I checked the HMVCGLXBRIDGE.sca and there are two files in the BUILDARCHIVES folder:
- test.sap.comhm-vc-glx-bridge.dcia
- test.sap.comtcvcglxbridgecomp~.dcia
Furthermore there are this folders:
DEPLOYARCHIVES
- test.sap.comhm-vc-glx-bridgetest.sap.com~hm-vc-glx-bridge.sda
- test.sap.comtcvcglxbridgecomptest.sap.comtcvcglx~bridgecomp.ear
META-INF
- MANIFEST.MF
- SAP_MANIFEST.MF
You can also download the file at SDN [right here|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5011e388-9417-2c10-14a5-b79912aad1ea].
At "LocalDevelopment" in NWDS everything works fine but I need this SC in a track!!!
I have the feeling that it stuck at a little little point
Regards

Installation hangs with Third Party Source component

Hi,
The installation hangs when it is installing Third Party Source (57%) in my environment.
This is my environment:
1. Solaris 10 x86 5/08
2. SunStudio12ml-solaris-x86-200709-pkg.tar
3. Installation method: single user, graphical user interface
4. Hardware: VMware Workstation 6.0.2, CPU 1.5G, memory 400M
I searched in SunStudio12ml-solaris-x86-200709-pkg.tar, and I could not find SPROrdbks package which belongs to Third Party Source component.
I suspect this is the root cause of my installation problem. I restart the installation, and I do not select to install Third Party Source component. But the installation process now hangs when it is installing Performance Library (56%). I don't what is the root cause :P
Can anyone help me?
Thank you very much!
Regards,
O2Cabin

Hi,
You could find log in the /var/sadm/install/logs directory. Probably it helps you.
(for example: /var/sadm/install/logs/Sun_Studio_Ceres_software_install.B09161643)
Unfortunately the SunStudio12 installer could have problems with virtual environments.
The Sun Studio is distributed as tar.bz2 archive (for latest Express it is wrapped into sh script).
You could just unpack it. The only difference is that there no packages are created.
Could this helps you?
Also if you use OpenSolaris you could install Sun Studio from IPS.
Thank you

Do we do any third party remittnaces for tax authorities?

Do you do any third party remittnaces for tax authorities?

Rakesh,
Yes, we can do that, check the table V_T51RH where you have to maintain the payee details. We can pay FICA, UI, Disability etc through 3PR
BR
Upen

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Faxing from Oracle EBusiness Suit with XMLP-Do i need any third party Tool?

Hi All,
We are having Oracle Apps 11.5.10.2 on Sun Solaris 5.8. We want to do faxing from our E Business Suit. I gone through the BLOG Entry for Faxing,where i found that i need to install CPUS. Can I installed CPUS on SUN Solaris? In the BLOG posted By TIM, it's wriiten there, that it can be installed on LINUX or UNIX only. Is there any way to installed it on SUN Solaris?
What is efax 0.9 software mentioned in user guide p.no. 11-38 for installing and setting up fax for CPUS.
Do i need any third party tool to do faxing from Oracle E-Business Suite.
OR if i am using XMLP for faxing then, it will take care of all the things, no need for any third party tool.
We are having XMLP 5.0.1 which comes by default with E-Business Suit 11.5.10.2.
Regards
Ravi

Ravi
SunSolaris is a flavor of UNIX so you can install and may even already have CUPS, get it to the latest version you can.
The efax soluition is an open source 'driver' if you will to enable faxing via CUPS.
You will not need anything else to do faxing from apps ... just cups and efax and your fax board of course.
Regards
Tim

I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

Unplug your iBook from the AC power, shut it down and take the main battery out for about fifteen minutes. Then you can put the battery back in, plug the power back in and restart. This should reset the USB and FireWire ports.
If that doesn't help, you could reset the Power Management Unit. Follow the instructions in Knowledge Base Article #14449 for resetting your PMU.
You probably should also startup from your Mac OS X install disk and run the Disk Utility to "repair disk" on your hard drive. This will determine if you've got some kind of file directory/software problems with the files on your hard drive.
I'm not much at decoding kernel panic logs, but this line jumps out:
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.udf(1.4.1)@0x28a79000
Did you have a DVD movie in the drive at the time? DVD movie disks are UDF format, but not much else is.
-Doug

Any third party software that replaces SecMon and IDS-MC

I am looking for any third party software that may replace SecMon and IDS-MC. We have had so many issues with it that it is time to find a solution by looking for another vendor to manage Cisco's NID's. If anyone has had any luck please let me know.

CWSIM is another tool that you can use to get log messages out of sensor. for management purposes if you have a few sensors then you can use IDS device manager.

Any third party mediaelement ?

Hi,
is there any third party media element for wpf which support wide range of formats including uncompressed formats.
media element - i found some rendering issued with the HD uncompressed videos.
mediaurielement - Flickering while playing high bitrate uncompressed movies and leak while using
the video as the visual brush.( tried filling many rectangle simultanously)
Visioforge - excluding this tool
is there any other media players for wpf.
Please list and help me

WPF MediaKit is an example of a third-party WPF media control:
http://wpfmediakit.codeplex.com/
There are some more suggestions under the Multimedia section of the following page:
http://www.wpftutorial.net/3rdpartylibs.html
But please note that these forums are intended for Microsoft's products and technologies only so if you have any questions about third-party software you should not ask these here :)
Please remember to close your threads by marking helpful posts as answer.

Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

Similar Messages

Maybe you are looking for