DO YOU HALF TO USE THE FINGERPRINT TO LOCK YOUR IPHONE 5S

do you half to use the fingerprint id to lock your iphone 5s

Actually, you are never required to use the fingerprint sensor.  You can always unlock your iPhone and make purchases just as if your iPhone did not have such a sensor.

Similar Messages

  • Why cant you use the fingerprint to unlock phone after it is disabled?

    Is there a way to unlock your phone using the fingerprint scanner after it has been disabled?

    No - you will need to do the following: iOS: Forgot passcode or device disabled

  • Sometimes when I unlock my 5s using the fingerprint scanner it takes a blank picture!

    I'm a bit puzzled by this one, but one occassioin when I'm using the fingerprint scanner to perform an unlock from the phone being asleep, it will snap a picture of the black screen and save it in the photos.  I hear the shutter sound and that's how I know it has occured.  Very randomly, but I do notice that when it does happen, it seems like it's when I hold the button down (as if I was going to call up Siri) a bit longer, but not long enough to bring Siri to my attention.  It's hard to reproduce the problem on command, but it's something that will happen at least once a day. 
    Anyone else have this happen? 

    Seriously?!! Nobody elese is having this problem?!! I must have a defective phone!  It does this about half the time I use the fingerprint scanner to perform a wake from sleep/unlock!

  • Are you forced to use the latest version CC 2014 as a new customer or can I use a previus version

    Hi,
    As a new customer in CC Cloud are you forced to use the latest version CC 2014 or can I use a previus version

    You can any version you like. Check the lower half of the CC app and have a peek at the menu..
    Mylenium

  • HT204587 Do i have to use the Fingerprint identity sensor with the iphone 5s or can i opt for a passcode only?

    Hi,
    Do I have to use the Fingerprint identity sensor with the new iPhone 5S or can i simply opt for a passcode only?

    You can have passcode only. That is what I do with my phone.

  • Why I don't use the fingerprint reader in my 5S

    I loved the fingerprint reader when I first used it, until I noticed one thing: When you enable the fingerprint passcode unlock, you lose the ability to set a duration of the "Require Passcode" option to anything other than "Immediately". If I'm txting or driving with my navigation app, I constantly need to be able to get in and out of the phone, and it's very inconvenience to have to swipe the notification on the lock screen and then have to use my fingerprint to get in. I want to still be able to only have it require a passcode after x minutes, even if I use the fingerprint option. For that reason I have turned off the fingerprint feature. Is there a workaround? Does anyone else find this anoying?

    Not sure what you are asking. Does your account not work on your phone, are you getting an error message ?

  • 'You Are Not Using The Correct Type of Phone Cord' Error

    Having a issue with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it  received a send error.  I ran fax test and it came back with "You are not using the correct type of phone cord".  Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok.  Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call out and receive calls on the phone connect to the Officejet.  My assumption is that since I can use the phone without issue there is nothing wrong with the phone line.  Any ideas?
    This question was solved.
    View Solution.

    I was having the same problem.  I'm using a the 2 wire phone cord provided with the printer and still getting this error.  Turns out that it related to have a phone extension plugged into the printer.  If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes.   I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error. 
    Run the test without a telephone plugged into the printer's extension jack and you should be fine.
    Worked for me!

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Backbeat 906 - do you have to use the adaptor?

    I've just purchased the Altec Lansing Backbeat 906, which is just charging up right now (so I haven't been able to use it).
    What the instructions don't make clear is whether you have to use the adaptor or not? There is a section on pairing the headset with your phone, followed by a section on pairing the headset with the adaptor. Do I have to do both?
    Also, in the troubleshooting section, it says that you actually need to pair the headset with the adaptor before pairing with the phone (i.e. the opposite way round to what the instructions suggest).
    Can someone clear this up?

    Sorry, but please clarify:
    So you can not only use the telephone options, but also listen to music via the iPod functonality of iPhone without the dongle right?
    Thx & Rgds

  • Have just up dated my iphone 4 to ios5, is the notification centre supposed to show as icon on the main screen, if so how do i get it to show and also i thought you could now use the camera direct form the locked screen?

    Have just updated my iphone 4 to ios 5, is the notification centre supposed to appear on your main screen as an icon if so how do i get it to show, and i thought you could now use the camera from the locked sreen i can't seem to this at the moment can anyone help? thank you

    Double click home button for camera to show up (and iPod).  Notifications seem to show up on lock screen that way, too.

  • Can you manually add data to Nike + or do you need to use the Nano?

    Can you manually add data to Nike + or do you need to use the Nano?
    What if you are on a trip and forgot your Ipod. It would be great to be able to add lost data. or even edit the Ipod data on the Nike + website

    Hi Hrbrmstr,
    That will be very cool if you can create an xml file
    that will allow us to add runs and edit runs on the
    Nike+ site! The trick may be getting past the server
    dragon which sends out a warning saying, "Your
    workout data could not be sent to nikeplus.com
    because the data could not be accepted by the server"
    when it does not like the data it is sent.
    For example, my runs that did not post had something
    in common: when I read these xml files with TextEdit,
    both have a line that says,
    "<stepCounts><walkBegin>0</walkBegin>". There's also
    a line that tracks steps run. It also said zero. Of
    course, these lines should NOT read zero, because I
    was not starting at zero steps! My guess is that this
    anomaly makes the Nike+ server either reject or
    delete these runs because the step count does not fit
    my other runs.
    Well, I'll leave this stuff to someone who knows more
    than I. Glad you're here.
    For jackt123, the longer is answer to your question
    is that certain things that are not doable now may be
    doable in the future. Stay tuned.
    I just got the dragon today. "Your workout data could not be sent to Nikeplus because iTunes received an unexpected response from the server. Please try again later." Did you ever find out why this happened to you? I went on nikeplus and it did in fact upload my latest run. Now my goals are blank on nikeplus.

  • Tell me how on the iphone 5s to use the fingerprint lock  option

    tell me how on the iphone 5s to use the fingerprint lock option

    The following has instructions: http://support.apple.com/kb/HT5883

  • How do you download InDesign using the Adobe Download Manager?

    How do you download InDesign using the Adobe Download Manager?

    With the Adobe Download Assistant installed you should be able to initiate the download at http://www.adobe.com/cfusion/tdrc/index.cfm?product=indesign.  If this is not working for you then please try an alternate web browser.

  • I had an iphone 3GS, but received my new iPhone 5 with micro sim, but wanted to keep old mobile number so rang up to change it, that's all working fine, but iMessage is still using the number I received with iPhone, how do you delete a new number?

    I had an iphone 3GS (normal sim), but received my new iPhone 5 with micro sim, but wanted to keep old mobile number so rang up to change it, normal text messaging is working fine, but iMessage is still using the number I received with iPhone 5, how do you delete that number I can only receive iMessages on my original number?

    Issue solved

  • Are you allowed to use the buttons underwater

    Hey so i was taking some photos underwater with my REPLACED sony xperia z3 tablet compact and pressing the volume rocker i realized some bubbles...  Only after pressing it,  i didnt make a big deal out of it since the tablet was already in the water few times for over 15 minutes without a problem. However this time was different...  After taking the tablet out of water the camera had condensation. I opened all flaps took out the sd and sim but what i see is that its bone dry and all marks are white. What my question is,  if the camera starts to condensate does it only mean that the water entered a little bit? And are you allowed to use the keys underwater because the z phones have the dedicated camera key to use underwater idk about the tablets tho.

    Oops thats the z3 forum not z3 tablet.  My mistake. If any mods see this,  please move this to the Sony Xperia z3 tablet compact forum section 

Maybe you are looking for

  • Blotch on display

    In the lower left hand side of my display there is a redish (when on a white background) blotch, that is see through, but reveals an uneven color quality on my screen, how can I fix this, or should I return my whole laptop?

  • Missing Easy Setup File 1080i50

    Hi guys Just upgraded to Sony HDV camera (HVR-A1E) PAL (UK). Pop into FCP5.x easy setup menu for capture and only settings are for 1080i60. Where is the 1080i50 gone? Cannot capture more than a few seconds of HD before dropped frame rate window pops

  • Different results for the semantically the same queries

    Hi, I'm encountering a very odd problem. Before providing an XQuery code, I will ask on the abstract level. I have an XQuery module with my own functions defined. Then in my main query I import that module and execute one function from there. I get l

  • Payload with Spaces

    Hi, In my scenario I am getting the data transferred to the receiver system properly.But the input payload generated is having spaces . The input XML is as follows : The XML is generated correctly but there is a gap after Data. Each time a gap is gen

  • ITunes crash every time I tried to launch it

    I've updatet to the 10.5 iTunes and it worked properly, but after few days it just stoped launching. every time the same error OS Version:      Mac OS X 10.7.2 (11C74) Report Version:  9 Interval Since Last Report:          52955 sec Crashes Since La