Dock to USB Connecter - Ripping

Hello,
I noticed that my Dock Connector to USB Cable is ripping on the USB end of the cord. I haven't tried to pull it off or anything. Could I get it replaced? There is no Apple Store here for miles If so, how?
Thanks

You could call Apple and get them to ship you one or you can order one online at:
https://selfsolve.apple.com/GetWarranty.do

Similar Messages

  • Zen V Plus and USB Connect

    Hello everyone. First off... I love the look, feel, and design of the Zen V plus. I'm hoping to eventually get to compliment the actual functionality of it. It has been a long day of hurry up and wait since I sped off to Circuit City early this afternoon for the Zen V plus. I'm just DYING to test it out, but it seems there is a major stumbling block. Let me give you a step by step run down of what has gone on since I can't seem to find a solution in the other posts I've read:
    I put the installation disc and successfully installed the software on it.
    After installation, I connected the zen v plus to the USB port and it wasn't long before I saw the battery symbol, complete with lightning bolt to show that it was charging. I also noticed that it was "docked", and I saw the USB symbol on the screen of the mp3 player. The button lights were glowing on and off. No problems yet...
    I checked to see if you could sync songs while it charged - and it didn't recognize the player.
    Around the 4 hour later mark, it DID recognize the player, and allowed me to rip and sync my Maroon 5 CD. I decided to leave and let it charge fully before making any other attempts.
    I come home, and the mp3 player has been charging for approximately 6.5 hours. The lights are no longer flashing, and it has appeared to shut off, which I assumed meant it was done charging.
    I unplug - attempt to turn on - and nothing. It's dead. Now...it's not being recognized at all.
    I'm not good with electronics really, and never pretended to be, but something tells me the USB connection is weird. My brother owns a PSP - and sometimes it doesn't want to read *his* device either. I'm wondering if perhaps it did recognize the device long enough to give me confidence that it was charging, and then lost the usb connection at some point. (It's highly doubtful that my pc went into any sort of sleep/power save mode because there is almost always someone on the computer here.)
    For what it's worth, I am using WMP 0, Windows XP (service pack 2), and have tried ALL usb ports (front and back) to get some juice into this thing. The computer just won't recognize it now. I plug it in and hit the power button, and it won't show me so much as a sign of life.
    Any suggestions

    I had this exact same problem. you should see a little plug on the battery when its connected to the computer, you are seeing a lightning bolt because your V Plus has an old Firmware version on it. Head to the Support->Downloads section and download the latest (..03 I think). This fixed most of the problems I was having.

  • Ipod Shuffle (2nd Gen) USB connection

    Please can someone help me, i have a 2nd gen shuffle. i have downloaded the newest itunes. when i connect the shuffle through the dock that is connected to my USB, all that happends is that at the bottom right hand side windows pops up a box that says windows dont no recognise device, remove and replace or get new one. what can i do to make my computer see the ipod.
    thank you.

    Nope, according to both Apple, and everything I have
    read, The USB doesn't have to be 2.0, it can be 1.0
    or 1.1.
    That's UNTRUE... Apple has NEVER claimed ANY iPod could function with USB 1.0!
    I called Apple, was on hold for 15 minutes
    and they told me to take it back to Circut City. They
    didn't have a solution. I am taking it down there,
    and a salesman said they will plug it into their
    computer and see if it works. So no solution here.
    Good luck... perhaps they'll replace it. IF you have an Apple Store close by, you could take it there instead for replacement.

  • My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    You will need to install the printer on your Mac
    Open System Preferences (gear icon) on the dock
    Open Print & Fax
    Click the + (plus) button at the bottom of the printer list
    Wait for your printer to appear in the next box, then click it to highlight it
    Click Add at the lower right
    Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
    You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

  • HP Laserjet P1102 print  multiple pages - USB connected to Airport Extreme -

    Hello,
    My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
    Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
    Help anyone..
    Thank you very much,
    - eagleputt

    Hi gingerjedi,
    It's normal with your actual Airport and confirm by Apple, but ...
    Only If you see your printer in Airport Admin Utility under Printer :
    1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
    2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
    3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
    4) Repair permissions with Onyx or with your Install Disk
    5) Restart your computer
    6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
    7) In Prefs Panes, select Printer ( + ) and install a new Printer
    8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
    9) And click Done
    With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
    I think all is ok for you.
    Message was edited by: thebuzzman

  • I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac, editing in imovie and burning on idvd. The picture quality is awful. What can I do?????

    I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac then editing in imovie and burning dvd-r using idvd. The picture quality is awful. What can I do??????

    At what point is the video quality bad?  Is it bad on capture?  I would recommend using an s-video 1394 firewire converter instead.  They capture the video at a higher bit rate.  If you have a lot of 8mm tapes to capture, invest in a stand alone DVD recorder.  They capture and compress in one shot.  If you need to rip it back from the DVD into iMovie again, I would recommend using DVDxDV.

  • USB connection for TravelDock for MicroPhoto

    I love my TravelDock, but I have a minor issue. When the MicroPhoto is docked in the TravelDock, and then connected to my computer via the USB connection in the rear of the TravelDock, the computer does not detect anything. I have the TravelDock and MicroPhoto powered on and plugged in via AC adapter, but it is still not detected by my computer. When I unplug the same USB cable from the rear of the TravelDock, undock my MicroPhoto, and directly connect the MicroPhoto using the USB cable, the computer detects the player! Has anyone else come across this problem? Am I missing something here or is it probably a faulty TravelDock?Otherwise, the TravelDock works wonderfully as a stand-alone unit.

    I love my TravelDock, but I have a minor issue. When the MicroPhoto is docked in the TravelDock, and then connected to my computer via the USB connection in the rear of the TravelDock, the computer does not detect anything. I have the TravelDock and MicroPhoto powered on and plugged in via AC adapter, but it is still not detected by my computer. When I unplug the same USB cable from the rear of the TravelDock, undock my MicroPhoto, and directly connect the MicroPhoto using the USB cable, the computer detects the player! Has anyone else come across this problem? Am I missing something here or is it probably a faulty TravelDock?Otherwise, the TravelDock works wonderfully as a stand-alone unit.

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • Playing music thru the USB connection

    I want to use my ipods (I have 4 different ones) to play music through my home stereo without using a docking station. My receiver has a USB input, so I want to be able to plug in the ipod(s) thru the USB so they can stay charged while they are playing. The problem is, I can't get any of them to play through the USB connection - only the headphone jack, which I don't want to use. Is there software available to get the ipods to output music through the USB interface?

    The stereo unit you are plugging into has to support iPod playback for what you are trying to do. Most do not. Check with the manufacturer.

  • T60 with Adv Mini Dock and USB FP keyboard Windows7 Issue

    I have been combing through these forums as well as others and I am unable to find anyone who has this issue.
    This only happens under Windows 7.  I have installed all the Lenovo drivers included in the System Update as well as the Betas but never can solve this.
    The problem occurs when I try to eject the T60 (8743) from the Adv Mini dock that has the USB Fingerprint Keyboard connected.  If I remove the keyboard before undocking it is fine and the machine undocks normally.
    Other than this issue, Windows7 works quite well on this system.
    Thank you

    Thanks for the advice Izzy.  After installing both sets of keyboard and hotkey drivers it does respond to most (but not all) blue Fn key combinations as marked on the external keyboard.  The blue ThinkVantage button still does not respond. 
    Oddly enough, I am able to use the Fn+F4 key combination to put it into sleep mode and to bring it back out, but when the display comes back I have no control of the UltraNav pad, track pointer, or mouse.  I had to open the TP cover slightly and use the pad to get past the login screen to the desktop.
    Incidently, just after using the UltraNav pad on the machine as it was slightly open a couple of messages popped up onscreen involving the USB port(s).  One indicated it was searching for a new device driver for a USB connected device, and the other indicated I could benefit from connecting the device to a high- speed USB port by unpluging the low-speed hub and connecting directly to an available high-speed USB port.
    Interestingly, I don't have any external hub connected. It may have identified the docking station USB ports as low-speed, which I don't believe they are...any ideas for what to do with this new set of issues? 
    Thanks, Mark

  • IPhone USB connection error

    For the past two months, I have been experiencing an error with my iPhone which started out as a nuisance, but is now downright annoying.
    I typically leave my iPhone (first generation) in its cradle, connected to the USB port on my computer whenever I am at hope. Around 6-8 weeks ago, I noticed an annoying occurrence: at seemingly random intervals the phone's connection with the computer would seem to be interrupted by something. The phone's chime which rings when it is connected and disconnected from a USB device would ring and so would the complimentary chime on my computer. If I had iTunes open at the time, iTunes would pop-up displaying a garbled version of the iPhone device summary, and I would receive between 4 and 6 pop-up messages alerting me that:
    "iTunes could not connect to the iPhone '' because an unknown error occurred (0xE8000035)"
    After changing the USB port I connected the phone to and trying to leave the phone connected directly to the USB cable (bypassing the cradle in case there was some wiring problem there), I decided to just ignore the problem. I figured that due to frequent use, the pins in the dock-connector terminal on the device had worn away.
    However, after downloading the iPhone 2.2 firmware, this problem has taken on a quite annoying angle. Now, in addition to the cycle of 6 disconnections and subsequent reconnections (which happens more frequently), the phone will spontaneously display a "Sync in Progress" message on its screen or enter some sort of reboot cycle. As best I can figure, this sync message is some sort of error on the part of the phone because iTunes does not seem to acknowledge the fact that a sync is in progress. The second new error - the spontaneous reboot cycle occurs at infrequent intervals (maybe once a day): the phone's screen will turn black with the animated "loading" circle spiraling to indicate the device is powering down. The device will then reboot, displaying the apple logo as-per normal. The second the normal iPhone screen appears, the USB connection quickly connects and disconnects, and the phone shuts down and restarts again. I have seen it continue this cycle 4 times before I halted the process by disconnecting the phone from the USB cable. After being disconnected from the USB cable, the phone continues its normal power-on procedure, except now that it is disconnected, it remains on and functions properly.
    I would appreciate any advice that might be offered on this matter. I initially thought this was a hardware problem, and while I still think it may be one, the fact that the frequency of the problem and its nature have changed with the new software and the fact that the disconnect/reconnect cycles do not seem to be triggered by any physical movement, I would suspect something software-related.
    I have iTunes 8.2.0.20 and iPhone firmware 2.2, although this problem did occur with at least iTunes 8.1 and iPhone 2.1.
    Thank you very much for any and all help!
    --Will

    From what I know about 0xE error codes, is that they can be related to memory among all things, and this usually happens when the computer cannot send data to the iPhone as fast as the iPhone needs it to. The iPhone will ask for something that hasn't been sent yet and because the receive is faster than the send it results in an 0xE error. (example : a bowl of apples - every time the computer puts out 1 apple the iPhone takes 2, because there are not 2 apples to take you get this error message.)
    I would say this is your issue, but your computer seems pretty decked out, 4GB RAM, quad-core intel core 2 extreme, Nvidia GForce 8800 (woot!) have you checked to see if there are update available for you motherboard?
    Might be space related, are you able to sync any data over? I would suggest just syncing 1 small playlist, or a few photos, or maybe just trying a different cable. I really wish I could help you on this one.
    Clearly testing on another computer isn't an option.
    As far as the iPhone power cycling the way it does, and the 'Sync In Progress' appearing on the iPhone but not the computer, there is clearly an inconsistency. I would suggest uninstall and reinstall iTunes, and the iPhone driver. I would also suggest restoring the iPhone as new, but if you are getting the error when syncing chances are your iPhone will get stuck in recovery mode.
    Do you have any friends with a Windows or Mac computer?
    Best of luck ✰

  • USB connection for iphone 5 hotspot is not working

    I am using OS X Lion on my MacBook Pro and all of a sudden it is not recognizing my iphone 5 as a hotspot using the usb connection.  It does connect using bluetooth.  Any suggestions? 

    Hello there, mcMlast.
    The following Knowledge Base article offers up some great recommendations for troubleshooting issues with no sound from the speaker on your iOS device:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please  contact Apple Support.
    Learn more about troubleshooting iPhone hardware issues.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPod Classic 5G 80GB is not docking but USB works fine. Ideas?

    My iPod 5G 80GB Classic not docking to a few new radios I bought. I tried the Luna Voyager and also the Logitech Pure-fi Express Plus. Nothing happens (as if I wasn't docking it). The USB connection to my computer works fine. I tried reformatting the iPod, restoring from iTunes, boot diagnostics, etc. and nothing seems wrong. The products state I am supposed to be able to dock this iPod. Any ideas as to what might be going wrong? Could it be the v1.3 firmware or a hardware issue? Anyone knows the protocol and how to diagnose it properly?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • AiO Remote Ink Levels etc not accessible with USB connection

    My printer prints and scans just fine...except that it ran out of ink after about 15 pages. I'm trying to view the ink levels, but everything in the HP AiO Remote says it's not supported with the USB connection. There's no other way to connect my printer. I need to view the ink levels and be able to put in new ink, but I can't because the software isn't working right. Help?

    Hi @HnnhSmth95, 
    I see by your post that you are unable to view the ink levels by a USB connection. I can help you with this, but I will need some more information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

    I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one.  Now, however, with my Ipad version 2 I can no longer get this to work.  Can anyone help?  Thanks.

    Hi,
    HP do not provide any USB connection solution for iOS.
    As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
    http://www.activeprint.net/support/
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • How to Manually Sort Images in Library View

    In lightroom 1 I was able... under some circumstances... to be able to pick and drag images to a new location in the library grid mode. What do I have to do to sort my images by the time they were taken first...then...be able to manually drag some im

  • Compilation errors on CommandLine works ok in JDeveloper!

    Hi, I am trying to run the application on a commandline. I am able to run it fine in JDeveloper as the application is created in JDeveloper. But I need to run it on a commandline. I need some help how to make it work. Here is the scenario: I have two

  • Please help me with modifying this code

    I am using the attached code to acauire and save data to a text file, using 'write measurement file' express VI. WHat I want to do is to replace 'write to measurement VI' with low-level file I/O VIs. I tried to convert the express VI, but the obtaine

  • Default  header text for PO

    Hello, Mine client requirement is like they want default header Text for all PO.Please guide me, what is the customization required? Regards, Jyoti

  • Oracle Portal in Home Network Server

    I installed Oracle Portal in one of three home PCs in a home network. The other two access files and the printer through the Portal PC. Does anyone know if this could cause problems with the Portal installation? I understand Oracle products are robus